Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture
Christian Križan, Janka Biznárová, Liangyu Chen, Emil Hogedal, Amr Osman, Christopher W. Warren, Sandoko Kosen, Hang-Xi Li, Tahereh Abad, Anuj Aggarwal, Marco Caputo, Jorge Fernández-Pendás, Akshay Gaikwad, Leif Grönberg, Andreas Nylander, Robert Rehammar, Marcus Rommel, Olga I. Yuzephovich, Anton F · 2024
Read Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture by Christian Križan, Janka Biznárová, Liangyu Chen, Emil Hogedal, Amr Osman, Christopher W. Warren, Sandoko Kosen, Hang-Xi Li, Tahereh Abad, Anuj Aggarwal, Marco Caputo, Jorge Fernández-Pendás, Akshay Gaikwad, Leif Grönberg, Andreas Nylander, Robert Rehammar, Marcus Rommel, Olga I. Yuzephovich, Anton F (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-15022.txt.
Introduction
Christian Križan and co-authors build a SWAP gate from just two simpler gates on a superconducting quantum chip, in this 2024 paper. Quantum compilers waste effort converting between gate families when a chip speaks only one dialect. The standard recipe needs three gates to fake a SWAP. This team shows one iSWAP followed by one CZ does the same job.
Their processor uses fixed-frequency transmon qubits joined by a tunable coupler that is wiggled to switch interactions. With that trick the chip natively covers three gate families. Any two-qubit Clifford operation then takes at most two two-qubit gates plus single-qubit turns. The authors frame the result as a compilation shortcut for real hardware. It extends a known platform's native set rather than inventing new physics.
Catalog record
| CREATOR | Christian Križan, Janka Biznárová, Liangyu Chen, Emil Hogedal, Amr Osman, Christopher W. Warren, Sandoko Kosen, Hang-Xi Li, Tahereh Abad, Anuj Aggarwal, Marco Caputo, Jorge Fernández-Pendás, Akshay Gaikwad, Leif Grönberg, Andreas Nylander, Robert Rehammar, Marcus Rommel, Olga I. Yuzephovich, Anton F |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 61 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-15022
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Quantum SWAP gate realized with CZ and iSWAP gates in a superconducting architecture Christian Križan, Janka Biznárová, Liangyu Chen, Emil Hogedal, Amr Osman, Christopher W. Warren, Sandoko Kosen, Hang-Xi Li, Tahereh Abad, Anuj Aggarwal, Marco Caputo, Jorge Fernández-Pendás, Akshay Gaikwad, Leif Grönberg, Andreas Nylander, Robert Rehammar, Marcus Rommel, Olga I. Yuzephovich, Anton Frisk Kockum, Joonas Govenius, Giovanna Tancredi, Jonas Bylander Abstract It is advantageous for any quantum processor to support different classes of two-qubit quantum logic gates when compiling quantum circuits, a property that is typically not seen with existing platforms. In particular, access to a gate set that includes support for the CZ-type, the iSWAP-type, and the SWAP-type families of gates, renders conversions between these gate families unnecessary during compilation as any two-qubit Clifford gate can be executed using at most one two-qubit gate from this set, plus additional single-qubit gates. We experimentally demonstrate that a SWAP gate can be decomposed into one iSWAP gate followed by one CZ gate, affirming a more efficient compilation strategy over the conventional approach that relies on three iSWAP or three CZ gates to replace a SWAP gate. Our implementation makes use of a superconducting quantum processor design based on fixed-frequency transmon qubits coupled together by a parametrically modulated tunable transmon coupler, extending this platform’s native gate set so that any two-qubit Clifford unitary matrix can be realized using no more than two two-qubit gates and single-qubit gates. December 2024 Keywords : superconducting microwave devices, quantum information science, qubit 1 Introduction The available gate set is an important consideration for practical quantum computation on the hardware platform of choice. A complete single-qubit gate set, supplemented with an entangling two-qubit operation, is a sufficient resource for universal quantum computation [ 1 , 2 ] . In practice, however, different types of two-qubit gates can be advantageous depending on the particularities of the hardware and its circuit architecture [ 3 ] , such as the feasible qubit connectivity [ 3 , 4 , 5 , 6 ] , the presence of residual interactions in the Hamiltonian leading to coherent errors, and the dominant noise channels leading to incoherent errors [ 7 , 8 , 9 ] . For superconducting qubits, the circuit-QED architecture offers flexibility in addressing such design trade-offs for quantum processors [ 10 ] . When executing quantum algorithms, it is often desirable to have easy access to a larger gate set than the bare minimum to enable efficient quantum circuit compilation [ 3 ] even though combinations of two-qubit and single-qubit gates can, in principle, perform conversions between two-qubit gate families [ 5 , 11 , 12 ] . The Clifford group contains four such families of locally inequivalent two-qubit gates [ 12 ] : CNOT-like gates such as the CZ gate, iSWAP-like gates, SWAP-like gates, and identity [ 11 , 13 , 14 , 15 ] . Gates are said to be locally inequivalent when one cannot be converted into another using only single-qubit rotations, which typically feature higher fidelity than two-qubit operations and execute \sim 10x faster. An example of a conversion between a CNOT gate and an iSWAP gate is shown in figure 1 . In devices made for noisy intermediate-scale quantum (NISQ) [ 16 ] computation, quantum circuits run within their constituent qubits’ coherence time and without error correction. Here for example, the CZ gate is advantageous in some NISQ algorithms based on minimizing the energy of the Ising Hamiltonian [ 17 ] , which includes an oftentimes residual and always-on ZZ interaction that commutes with the CZ unitary matrix. In another example, the iSWAP family is naturally suited for quantum chemistry calculations where the qubits represent fermionic states; here, iSWAP plus single-qubit gates form the fSWAP interaction, which respects fermionic anti-commutation relations. This interaction has known decompositions using four CNOT-like gates [ 18 ] , although two CNOT gates is theoretically sufficient [ 19 ] as \mathrm{fSWAP}\in SO(4) . However, iSWAP gates do not commute with ZZ terms [ 20 ] , which is why errors of such always-on interactions may accumulate. Even though the CZ gate is implemented via a Hamiltonian that also does not commute with ZZ terms, this gate may have its pulse parameters adjusted to omit static ZZ terms [ 20 , Section V.D] . In the context of fault-tolerant quantum computation, proposals for subcells of the error-correcting surface code use the CNOT gate, locally equivalent to the CZ gate, as their fundamental two-qubit gate [ 21 ] . On the other hand, in surface-code circuits, the iSWAP gate may reduce the coupling per qubit and boosts resilience to leakage compared to CNOT-like gates [ 5 ] . Superconducting qubits afford versatility in the implementation of two-qubit gates as we can engineer interactions between states, and have access to a rich level structure. One prominent implementation is the parametrically modulated coupler, which, with transmon qubits, has been used to demonstrate high-fidelity two-qubit gates [ 20 , 22 , 23 , 24 , 25 ] and to run quantum algorithms [ 17 ] . The device used in the investigation reported here comprises a frequency-tunable transmon coupler that is connected to two fixed-frequency transmon qubits, see figure 2 . Microwave modulation of the coupler’s frequency mediates interactions between the qubits. In this system, we can address the different transitions in the two-qubit manifold, which enables native execution of CZ and iSWAP gates. By means of microwave pulses, the CZ gate can be implemented by driving the \ket{11}\rightarrow\ket{20} (or \ket{11}\rightarrow\ket{02} ) transition; the iSWAP gate relies on XX+YY exchange interaction [ 26 ] , activated by driving the \ket{01}\rightarrow\ket{10} transition; and the bSWAP uses the XX-YY exchange interaction, which can be realized by driving the two-photon \ket{00}\rightarrow\ket{11} transition [ 22 , 26 , 27 ] . We call these gates native to this system, whereas for example CNOT is not native, since we compose it from CZ and single-qubit gates, shown in figure 1 (c). Figure 1: Derivation of the SWAP operation using CZ and iSWAP gates. (a) The SWAP gate is equivalent to three subsequent CNOT gates [ 28 ] , as is true also in classical logic. (b) The initial double-CNOT gate may be expressed using an iSWAP gate combined with conjugate-transposed phase gates ( S^{\dagger} ) and Hadamard ( H ) gates [ 12 ] : \mathrm{CNOT}_{10}(\mathrm{CNOT}_{01}(\Psi)) is decompiled into its iSWAP equivalent. (c) We express the last \mathrm{CNOT}_{01} gate from (a) as its local equivalent [ 29 ] , using a CZ gate and by straddling one qubit with two H gates. (d) We finally put (b) and (c) together to form a SWAP operation. Note here that the two subsequent H gates cancel into identity, H(H(\Psi))=I(\Psi) . In principle, the order of the CZ and iSWAP gates in (d) is irrelevant as they commute. One important gate that is not native to most [ 3 , 30 ] quantum processors is the SWAP gate. This gate is useful in systems without long-range or all-to-all couplings between qubits, which is typical for superconducting quantum processor architectures. The SWAP gate allows a two-qubit operation between two distant qubits to be performed by repeatedly swapping the states [ 4 , 6 ] within