Ultrastable optical frequency dissemination over a branching passive optical network using CDMA

Rodrigo González Escudero, 1 Sougandh Kannoth Mavila, 1 and Jeroen C. J. Koelemeij *,1 · 2024

Read Ultrastable optical frequency dissemination over a branching passive optical network using CDMA by Rodrigo González Escudero, 1 Sougandh Kannoth Mavila, 1 and Jeroen C. J. Koelemeij *,1 (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-14820.txt.

Introduction

Rodrigo González Escudero, Sougandh Kannoth Mavila, and Jeroen Koelemeij show a way to send a rock-steady light frequency through a branched, passive fiber network to many users. Their paper is from two thousand twenty-four.

Each user hops the light's frequency in a code known just to them, in quick steps. On receipt, each user matches the code they get to the one they sent. That match lets them pick out their own signal and shut out the rest. The plan grows how many users the network can serve. It also cuts noise from stray bounce in the fibers, and eases how the system is run. Tests show a steadiness finer than one part in a vast count.

Catalog record

CREATORRodrigo González Escudero, 1 Sougandh Kannoth Mavila, 1 and Jeroen C. J. Koelemeij *,1
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE46 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-14820

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ultrastable optical frequency dissemination over a branching passive optical network using CDMA Rodrigo González Escudero, 1 Sougandh Kannoth Mavila, 1 and Jeroen C. J. Koelemeij *,1 Abstract We demonstrate a technique for ultrastable optical frequency dissemination in a branching passive optical network using code-division multiple access (CDMA). In our protocol, each network user employs a unique pseudo-random sequence to rapidly change the optical frequency among many distinct frequencies. After transmission through the optical network, each user correlates the received sequence with the transmitted one, thus establishing a frequency-hopping spread spectrum technique that helps reject optical signals transmitted by other users in the network. Our method, which builds on the work by Schediwy et al. [Opt. Lett. 38 , 2893 (2013)], improves the frequency distribution network’s capacity, helps reject phase noise caused by intermediate optical back scattering, and simplifies the operational requirements. Using this protocol, we show that a frequency instability better than ∼ 10 − 18 \sim 10^{-18} at 100 s 100\text{\,}\mathrm{s} while having more than 100 users operating in the network should be possible. Finally, we theoretically explore the limits of this protocol and show that the demonstrated stability does not suffer from any fundamental limitation. In the future, the CDMA method presented here could be used in complex time-frequency distribution networks, allowing more users while, at the same time, reducing the network’s complexity. Journal: oe 1 Introduction Since its earliest demonstration [ 1 ] , ultrastable optical frequency dissemination using fiber-optic links has seen a great deal of development, including many demonstrations over long-haul links [ 2 , 3 , 4 , 5 ] and the establishment of frequency distribution networks with complex topologies such as branches and loops [ 6 , 7 , 8 , 9 ] . These developments are motivated by a plethora of applications such as quantum key distribution [ 10 , 11 ] , seismic sensing [ 12 , 13 ] , precision spectroscopy for the determination of fundamental constants [ 14 ] , and relativistic geodesy [ 15 , 16 , 17 ] . To fully realize these goals it is desirable to deliver the optical signal to as many users as possible while keeping the network’s complexity and cost low. In most of the existing implementations, this target is hindered by the transmission technology used. For example, multi-user branching networks are formed by creating parallel point-to-point connections, requiring involved equipment including repeater lasers at each branching site [ 7 ] . In addition, the branching device may have to be located at intermediate sites with limited access (such as data centers), where installing (additional) hardware might be relatively complicated and costly. Some of the aforementioned challenges have been resolved in part using automated and standardized systems [ 18 ] . Another method for cost-effective distribution of an ultrastable optical carrier signal along a linear stabilized link was demonstrated in Refs. [ 19 , 20 ] . A particularly advantageous branched network for ultrastable frequency dissemination was demonstrated in Ref. [ 21 ] . Here, a single ultrastable signal was distributed over several fiber-optic branches using a simple passive optical power splitter, which makes the method inherently compatible with relatively inexpensive passive optical networks. At the end of each branch, an electro-optical unit takes care of the stabilization of the optical path between the ultrastable laser source and the end of the branch, and simultaneously provides the ultrastable optical signal to the local user. Here, the detection of fiber-length variations is based on a beat note between the original ultrastable carrier and a frequency-shifted optical wave, produced by the electro-optical unit, that makes a round trip from the branch’s end to the ultrastable laser source and back. The latter wave therefore passes through the optical splitter twice, which inevitably leads to cross talk between different user sites. Schediwy et al. solve this by assigning slightly different frequency shifts to the round-trip wave of each user, so that after detection electrical bandpass filters can be used to reject the undesired signals from other users in the network [ 21 ] . Therefore each user must use a unique optical frequency, which requires a certain amount of coordination among the users themselves or by a central administrator. Because link stabilization requires some bandwidth around the optical frequency of each user, the number of users is ultimately limited. Another potential weakness is the sensitivity to rogue users or attackers, which could (un)intentionally disable an arbitrary number of branches by transmitting in frequency channels that had already been assigned to other users. The technique presented in Ref. [ 21 ] is a form of frequency-division multiple access (FDMA). FDMA was used in early generations of mobile networks and its limitations are well known [ 22 ] . By contrast, later generations improved this implementation using code-division multiple access (CDMA). In CDMA, each receiver uses a unique pseudo-random sequence and correlates the received signal with the expected sequence to reject signals of other users in the network. Here we show that CDMA can be extended to the realm of ultrastable optical frequency dissemination. In our implementation, the pseudo-random sequence is encoded in the optical signal by hopping over many distinct optical frequencies. After transmission through the optical system, we recover the original sequence and reject the effect of other users in the network. We show that CDMA can be used to transfer the optical reference while having many users operating in the network and we explore the limitations of this dissemination technique. We estimate that a fractional frequency stability of \sim 10^{-18} at 100\text{\,}\mathrm{s} while having more than 100 users operating in the network is possible. We explore the limitations of this technique and show that with further improvements more users are possible. Finally, our method rejects reflections inside the fiber, a common source of noise [ 2 ] , reducing the number of instruments required inside an optical fiber link. The CDMA method presented here could ease the development of complex (passive) optical networks for ultrastable frequency dissemination, by allowing many more users to operate in the same network while reducing the hardware requirements. We note that our approach is similar in spirit to the technique described in [ 23 ] ; however, to the best of our knowledge, our work represents the first demonstration of frequency-hopping CDMA for optical link stabilization and frequency transfer. We also point out that cross-correlation of frequency-hopping sequences was recently used to transfer time over fiber links up to 150 km in length with picosecond stability, while observing similar suppression of effects of unwanted reflections [ 24 ] . Cross-correlation of 10 Gb/s on-off-keyed optical data, for the purpose of fiber-optic delay measurements over 75 km distance with few picoseconds uncertainty, was demonstrated earlier by Sotiropoulos et al. [ 25 ] . 2 Protocol description 2.1 CDMA single link Figure 1: Simplified diagram of the experimental setup. A more detailed description of each remote site including all relevant experimental components used is shown in figure 2 . The dashed box shows a possible frequency hopping sequence used to drive the AOM. The shown sequence follows equation 6 with f_{0}=$40\text{\,}\mathrm{MHz}$ , \Delta\!f=$1\text{\,}\mathrm{MHz}$ , t_{s}=$1\text{\,}\mathrm{\SIUnitSymbolMicro s}$ and {N_{\mathrm{hopping}}}=3 . FM, Faraday mirror;

Read the complete text