Impact of Josephson junction array modes on fluxonium readout

Shraddha Singh, Gil Refael, Aashish Clerk, Emma Rosenfeld · 2024

Read Impact of Josephson junction array modes on fluxonium readout by Shraddha Singh, Gil Refael, Aashish Clerk, Emma Rosenfeld (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-14788.txt.

Introduction

Singh, Refael, Clerk, and Rosenfeld study a subtle way that reading out a quantum bit can disturb it. In the fluxonium qubit, measurement drives can knock the qubit into other states, an effect called measurement-induced state transitions. Earlier work explained such effects in transmon qubits, but the fluxonium's strong nonlinearity and its chain of Josephson junctions open an extra route.

The new route excites the qubit and an internal mode of the junction chain at the same time. Using an adiabatic Floquet method, the authors show this process matters at realistic settings and modest drive powers, and that it keeps dephasing the qubit after readout ends. They also map which circuit choices can steer around the problem.

Catalog record

CREATORShraddha Singh, Gil Refael, Aashish Clerk, Emma Rosenfeld
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE115 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-14788

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Impact of Josephson junction array modes on fluxonium readout Shraddha Singh, Gil Refael, Aashish Clerk, Emma Rosenfeld Abstract Dispersive readout of superconducting qubits is often limited by readout-drive-induced transitions between qubit levels. While there is a growing understanding of such effects in transmon qubits, the case of highly nonlinear fluxonium qubits is more complex. We theoretically analyze measurement-induced state transitions (MIST) during the dispersive readout of a fluxonium qubit. We focus on a new mechanism: a simultaneous transition/excitation involving the qubit and an internal mode of the Josephson junction array in the fluxonium circuit. Using an adiabatic Floquet approach, we show that these new kinds of MIST processes can be relevant when using realistic circuit parameters and relatively low readout drive powers. They also contribute to excess qubit dephasing even after a measurement is complete. In addition to outlining basic mechanisms, we also investigate the dependence of such transitions on the circuit parameters. We find that with a judicious choice of frequency allocations or coupling strengths, these parasitic processes can most likely be avoided. Preprint: APS/123-QED I Introduction The fluxonium superconducting qubit, based on a Josephson junction shunted by a capacitor and a large inductance, has emerged as a promising platform for quantum information. It exhibits long lifetimes [ 1 , 2 , 3 , 4 ] , and both single [ 5 ] and two-qubit gates [ 6 , 7 ] have been demonstrated with high fidelity, with potential room for even further improvements [ 8 , 9 , 10 , 11 , 12 ] . The inductive shunt is a crucial part of the fluxonium circuit, with the most common realization being a Josephson junction array (JJA). In regimes where internal array modes are not excited, the JJA can act as a linear superinductance (see e.g. [ 13 , 14 ] ). In addition to coherence and the ability to do high-fidelity gates, the ability to make fast and efficient measurements is crucial for any qubit platform. Similar to other superconducting qubits, dispersive readout (using a driven readout cavity) has been the standard choice for fluxonium readout (see e.g. [ 5 ] ). While such measurement schemes should ideally be quantum non-demolition (QND) [ 15 ] , several experiments have reported non-QND backaction (either enhanced qubit error or transitions to non-computational states) during fluxonium readout [ 6 , 16 , 17 , 18 ] . Recent theoretical work on driven transmon qubits has provided insights into these so-called measurement-induced state transitions (MIST), showing that multi-photon transitions can lead to resonant excitation of the transmon to higher levels (see e.g. [ 19 , 20 , 21 , 22 , 23 , 24 ] ). Figure 1: Schematic of a PMIST process. A parasitic back-action effect where a readout drive applied to a cavity (black) simultaneously and resonantly excites extraneous linear modes (red) as well as the qubit (blue). Similar detrimental transitions can occur during fluxonium readout. The fluxonium circuit is fundamentally different and hence MIST effects here need independent analysis. For example, the enhanced nonlinearity can dramatically change the number and likelihood of potential transitions [ 25 , 20 ] . In this article, we analyze a unique MIST mechanism in fluxonium that arises due to the internal modes of the JJA during fluxonium readout (see Fig. 1 ). We show that for realistic parameters and drive powers, deleterious resonant processes that simultaneously excite the qubit and an internal mode can occur. We term these processes parasitic MIST or PMIST. This work can be viewed as an example of a more general problem: how is the physics of MIST modified in the presence of a structured environment? We focus on a heavy fluxonium qubit operated at its flux sweet spot (cf Fig. 2 ) and investigate MIST, considering the coupling to the most relevant JJA internal mode. We treat the readout as an effective classical drive on the fluxonium-plus-JJA system and use an adiabatic Floquet branch analysis to identify dominant MIST processes. This method was used for transmon studies in Refs. [ 22 , 23 , 21 ] . We also validate this approach through full time-dependent simulations. Our work goes beyond showing that such processes could be relevant. We discuss how they provide a mechanism for degrading qubit coherence even after measurements are complete (via dephasing from dispersive couplings to the excited internal modes). We also discuss how alternate circuit designs affect PMIST processes, focusing on how modifications affect the parasitic mode to qubit coupling strengths. Our analysis suggests that in optimizing fluxonium readout, parasitic JJA modes introduce additional constraints on the circuit design. We stress that our analysis is not an exhaustive study of MIST effects in fluxonium readout but aims to show how new mechanisms involving internal JJA degrees of freedom arise in realistic setups. The key contribution of this work is its identification of a novel, non-QND backaction on the qubit mode that differs fundamentally from previously studied MIST effects. Unlike prior analyses, which largely ignored the influence of the JJA parasitic modes or any additional non-qubit degrees of freedom, our study provides a detailed examination of these effects in the context of fluxonium qubits. While typically irrelevant for standard qubit operations, we show that the parasitic modes can induce a wide range of unexpected transitions and backaction mechanisms during readout, revealing a rich and underexplored source of error. The remainder of this article is structured as follows. Sec. II analyzes the full circuit, including fluxonium, JJA, and readout cavity. Using a standard harmonic approximation [ 26 ] , we derive qubit-parasitic mode coupling strengths and lower-bound parasitic mode effects during readout. Sec. III analyzes readout dynamics, including MIST processes and dephasing from parasitic modes. Sec. IV examines the effects of varying coupling strengths between the qubit and a JJA internal mode on PMIST, and investigates different ranges of readout frequencies and parasitic mode frequencies using an energy-conservation picture. In the concluding Sec. V , we discuss directions for future work. Figure 2: Fluxonium readout circuit, qubit and array modes spectrum. (a) The color scheme shows primary components that correspond to various modes, depicted in Fig. 1 when a JJA fluxonium circuit is connected to a readout cavity (R). The subscripts ‘ \mathrm{p,j} ’ denote components of the phase-slip junction and the JJA, respectively. This circuit shows coupling capacitances ( C_{\textrm{c}} ), readout frequency parameters ( \omega_{\textrm{r}}=1/\sqrt{L_{\textrm{R}}C_{\textrm{R}}} ), parasitic ground capacitances in JJA ( C_{\textrm{g,j}} ) and next to the phase-slip junction ( C_{\textrm{g,p}} ). The differential capacitance C adjusts the charging energy of the qubit mode (see Table 2 ). (b) Fluxonium mode energy levels in units of h , with the highlighted area showing the first three levels essential for certain readout schemes [ 5 ] . Defining \omega_{ij} as the splitting frequency between the fluxonium states i,j , we have \omega_{01}/2\pi=30\ \mathrm{MHz},\ \omega_{12}/2\pi=6.03\ \mathrm{GHz} . (c) Parasitic mode frequencies \omega_{\mu}/2\pi . The lowest even mode \mu=2 has the strongest coupling to the qubit (see Fig. 11 in App. B.1 ). N \varphi_{\textrm{ext}} E_{\textrm{J}_{\textrm{p}}} E_{\textrm{C}_{\textrm{p}}} E_{\textrm{C}} E_{\textrm{J}_{\textrm{j}}} E_{\textrm{C}_{\textrm{j}}} E_{\textrm{C}_{\textrm{g,j}}} E_{\textrm{C}_{\textrm{g,p}}} E_{\textrm{C}_{\textrm{c}}} 122 0.5\Phi_{0} 7.30 6.12 1.73 60 0.74 194 1.94 19.40 Table 1: Circuit parameters for Fig. 2 (a) inspired by Ref. [

Read the complete text