Components and anisotropy of 3D QFP waves during the early solar eruption
Jialiang Hu, Jing Ye, Yuhao Chen, Zhixing Mei, Shanshan Xu, Jun Lin · 2024
Read Components and anisotropy of 3D QFP waves during the early solar eruption by Jialiang Hu, Jing Ye, Yuhao Chen, Zhixing Mei, Shanshan Xu, Jun Lin (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-13984.txt.
Introduction
Hu and co-authors sim the 3D form of QFP waves in an early sun burst. Spread of shakes in the sun air is 3D by its build. Yet full tales of 3D wave fronts stay rare in print. Their high-grade 3D sims chase thread bursts and EUV waves. The EUV front takes a dome form with three split zones. Zone one leads the flux rope with fast shock waves.
Those shocks heat the gas that sits near the front line. Zone two flanks the rope with spread waves that cool gas. Zone three, at the join of the two, sits near still. That split form stems from the rope's acts in the burst. The rope works as a 3D push: it packs gas in front. It drains gas at back, which makes the spread waves.
Catalog record
| CREATOR | Jialiang Hu, Jing Ye, Yuhao Chen, Zhixing Mei, Shanshan Xu, Jun Lin |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 38 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-13984
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Components and anisotropy of 3D QFP waves during the early solar eruption Jialiang Hu, Jing Ye, Yuhao Chen, Zhixing Mei, Shanshan Xu, Jun Lin Abstract The propagation of disturbances in the solar atmosphere is inherently three-dimensional (3D), yet comprehensive studies on the spatial structure and dynamics of 3D wavefronts are scarce. Here we conduct high-resolution 3D numerical simulations to investigate filament eruptions, focusing particularly on the 3D structure and genesis of EUV waves. Our results demonstrate that the EUV wavefront forms a dome-like configuration subdivided into three distinct zones. The foremost zone, preceding the flux rope, consists of fast-mode shock waves that heat the adjacent plasma. Adjacent to either side of the flux rope, the second zone contains expansion waves that cool the nearby plasma. The third zone, at the juncture of the first two, exhibits minimal disturbances. This anisotropic structure of the wavefront stems from the configuration and dynamics of the flux rope, which acts as a 3D piston during eruptions—compressing the plasma ahead to generate fast-mode shocks and evacuating the plasma behind to induce expansion waves. This dynamic results in the observed anisotropic wavefront. Additionally, with synthetic EUV images from simulation data, the EUV waves are observable in Atmospheric Imaging Assembly 193 and 211 Å \AA , which are identified as the fast-mode shocks. The detection of EUV waves varies with the observational perspective: the face-on view reveals EUV waves from the lower to the higher corona, whereas an edge-on view uncovers these waves only in the higher corona. I Introduction Since the first report in 1998, EUV waves have become an active research topic in the field of solar physics. These waves are observed about 100 times annually, except for periods of solar minimum ( Warmuth 2015 ) . And these large-scale disturbances can be identified in multiple wavelengths, including soft X-ray, ultraviolet, H_{\alpha} , He I, white light, and radio. Some observations showed that EUV waves often manifest as arc-shaped or circular diffuse structures with a single peak, typically centered around solar flares ( Zheng et al. 2019 ) . Originating approximately 100 Mm away from the epicenter of the flare, these waves can travel at velocities up to several hundred kilometers per second, covering distances averaging about 500 Mm and occasionally spreading over the entire solar surface ( Hu et al. 2019 ) . Veronig et al. 2010 used the STEREO spacecraft to observe the dome-shaped morphology of an EUV wave, during a coronal mass ejection (CME). This study indicated that the low-coronal signatures above the limb perfectly connect to the on-disk signatures of the wave and the dome’s upward expansion speed (approximately 650 km/s) surpassing its lateral expansion rate (about 280 km/s). Ma et al. 2011 ; Shen et al. 2019 supported these findings, showing that the radial speed of dome-shaped EUV waves was 1.3 to 2.3 times faster than their lateral counterparts. Early studies barely addressed the periodicity of EUV waves, because only single wavefront can be clearly observed. However, Ballai et al. 2005 identified oscillations with a period of several hundred seconds by analyzing intensity fluctuations along the wavefront. In a few cases, multiple wavefronts were observed, but no periodicity analysis was conducted ( Hudson et al. 2003 ; Patsourakos et al. 2010 ) . Liu et al. 2011 , using data from the Atmospheric Imaging Assembly (AIA) on the Solar Dynamics Observatory (SDO) conducted a detailed analysis of large-scale quasi-periodic fast propagating (QFP) wave trains within an EUV wave during an eruption. They found that the initial propagation speed of these wavefronts reached up to 1400 km/s and proposed that CME expansion was probably the primary driver behind EUV wave formation. Recently, Shen et al. 2019 utilized high-resolution AIA data to clearly observe the quasi-periodic multi-front structure of an EUV wave. They measured a wave period of approximately 163 s and, for the first time, determined that the wavelength of the EUV wave ranged between 84 and 110 Mm. Shen et al. 2022 studied several events associated with large-scale QFP waves and found that single-front EUV waves and large-scale EUV wave trains (corresponds to QFP waves here ) share similar propagation features. Therefore, two key questions remain regarding QFP waves: 1) What physical processes are responsible for the formation of QFP waves? 2) What are the specific components of each wavefront, and how solar activities influence the three-dimensional structure of these wavefronts ? The formation of large-scale EUV waves is often related to solar eruptions. Statistical studies of intense flares indicate that even in high-energy flares, EUV waves do not occur in the absence of CMEs ( Chen 2006 ) . These results have led to the growing consensus that EUV waves are excited by CMEs, similar evidences are found in recent observations ( Patsourakos & Vourlidas 2012 ; Zhou et al. 2020 ) . EUV waves typically form during the early acceleration phase of the CME, with greater acceleration resulting in stronger nonlinear fast magnetoacoustic waves or shocks ( Patsourakos & Vourlidas 2012 ) . As a result, large-scale EUV waves during solar eruptions are generally fast-mode shocks, produced by a piston-driven shock mechanism. However, in the real solar atmosphere, the piston effect of CME is three-dimensional. Recnetly, Hu et al. 2024 conducted two-dimensional numerical simulations to investigate QFP waves during the early stage of solar eruptions. Their results showed that arc-shaped wavefronts are successively generated and propagated outward on either side of the CME, with speeds reaching several thousand kilometers per second. By tracking the origin of the wavefronts, they found that these QFP waves originated from disturbances within the flux rope. The flux rope acted as an imperfect waveguide, allowing the perturbation inside the flux rope to escape to the outside successively via its surface, invoking the observed QFP waves. But it is still in lack of a detailed description of the structure and propagation features of QFP waves in three-dimensional space. Observational studies of EUV waves often rely on line-of-sight integration, typically rendering wavefronts as arc-shaped or circular due to the observation direction ( Zheng et al. 2019 ) . Although Veronig et al. 2010 observed for the first time the dome-shaped structure of EUV waves using STEREO, their data could not fully reveal the complete three-dimensional structure of these waves. In this work, we employ a three-dimensional eruption model (TD model) ( Titov & Démoulin 1999 ) to numerically simulate the complete three-dimensional structure of QFP wavefronts during the early stages of solar filament eruptions. By tracking the origin of the wavefronts, we investigate the mechanisms responsible for QFP wave formation. We also perform a quantitative analysis of the intensity distribution and components of these three-dimensional wavefronts, providing a comprehensive characterization of their properties and origins. The structure of the paper is as follows: Section II introduces the model and numerical techniques used in the simulations. Section III presents the simulation results, including synthesized extreme ultraviolet images from the simulated physical quantities. Finally, Section IV summarizes the findings of this study. II numerical simulation To model the three-dimensional coronal eruption of a solar filament, we utilized the MPI-AMRVAC code Keppens et al. 2012 ; Porth et al. 2014 ; Xia et al. 2018 ; Keppens et