Reducing Foam Friction with Self Slippery Liquid-Infused Porous Surfaces

Alexis Commereuc, Emmanuelle Rio, François Boulogne · 2024

Read Reducing Foam Friction with Self Slippery Liquid-Infused Porous Surfaces by Alexis Commereuc, Emmanuelle Rio, François Boulogne (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-13692.txt.

Introduction

Alexis Commereuc, Emmanuelle Rio, and François Boulogne cut foam friction with self-wetting surfaces in a 2024 paper. Moving liquid foam through pipes wastes energy on wall friction. Rough surfaces can help if liquid fills their bumps, creating a slippery layer. The team built surfaces that supply that liquid themselves, so the slippery layer renews on its own.

A foam puddle slid more easily on their surface than on a smooth one in simple trials. Stress gauges then measured friction while surfaces moved at fixed speeds. A model based on an effective slip length explained how friction changed with speed. Cheaper foam transport matters for industry, from food to firefighting. The design points to surfaces that stay slippery without outside feeding.

Catalog record

CREATORAlexis Commereuc, Emmanuelle Rio, François Boulogne
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE20 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-13692

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Reducing Foam Friction with Self Slippery Liquid-Infused Porous Surfaces Alexis Commereuc, Emmanuelle Rio, François Boulogne Abstract Acquiring a comprehensive understanding of the interplay between foam friction and surface roughness is essential for achieving precise control over their flow dynamics. In particular, a major challenge is to reduce friction, which can be achieved with rough surfaces in the situation where a liquid infuses the asperities. In this study, we propose to explore self-infused surfaces. We first present simple observations to demonstrate the effectiveness of our surface design by recording the motion of a foam puddle on a smooth surface and a self-SLIPS. To quantify friction reduction, we conduct stress measurements on surfaces moved at a constant velocity. Finally, we interpret the variation of the friction force with the velocity by a model considering an effective slip length of the surface. This research paves the way for a novel approach to mitigate dissipation in liquid foam flows, holding significant implications for reducing energy consumption in conveying foams for industrial processes and various end-use applications. 1 Introduction Whether it is for simple fluids like water or complex fluids, boundary conditions play a crucial role in understanding and controlling their flow. In complex fluids, wall slippage is often observed such as for polymer melts, polymer solutions, emulsions, suspensions [ 1 ] , and also liquid foams [ 2 , 3 , 4 ] . Surface texturing has been successfully employed as a means to increase the friction at solid walls for various complex fluids such as emulsions [ 5 ] and foams [ 6 ] . Indeed, to perform rheological measurements of the bulk fluid properties, it is crucial to prevent wall slippage and ensure to apply shear to the bulk of the tested material. In such case, asperities offer anchoring points for instance for the soap films of liquid foams [ 6 , 7 ] . Nevertheless, surface texturing has also the potential to increase slip at solid walls. An illustration of this phenomenon can be found in nature, such as with the surface of pitcher plants [ 8 ] . By introducing a non-miscible fluid in surface textures, surfaces with exceptional slippery properties, known as SLIPS (Slippery Liquid-Infused Porous Surfaces), can be obtained [ 9 , 8 , 10 ] . This new class of materials has opened up various applications where such exceptional slippery properties are desirable, such as in anti-icing [ 11 ] , anti-biofouling [ 12 ] , and self-cleaning surfaces [ 8 , 13 ] . However, for the specific case of liquid foams, these textured surfaces infused with oil can be problematic. In fact, a foam placed in contact with an oil layer can carry the oil in the liquid channels [ 14 ] , ruining the infused surface. In addition, SLIPS have been recently demonstrated as effective anti-foaming agents [ 15 ] . Although these findings can be useful in processes where foam is undesired, they also imply that oil-based surfaces cannot be used to reduce foam friction. Our objective is to produce a surface reducing the friction with respect to a smooth surface and compatible with aqueous foams. The design of the proposed surface relies on their roughness and their hydrophilicity such that they are infused by a small amount of liquid extracted from the liquid foam itself, which makes these surfaces compatible with the foam. Hence, these self slippery liquid-infused surfaces or self-SLIPS are expected to enable friction reduction without the need for additional phase. We start by showing that such surfaces are effectively reducing the foam friction with simple observations on inclined surfaces. Then, we perform measurements with controlled foam properties and at a constant surface velocity to record the friction stress and quantify the stress reduction on self-SLIPS. Figure 1: (a) Image illustrating the experiment from a side view. A small amount of foam is put on top of horizontal smooth and textured surfaces. Surfaces are lifted up to 68 ∘ from horizontal to create a gravity flow. (b) Evolution of the position of the foam along the surfaces with respect to time. In blue for the smooth surface and in purple for the textured one. The velocity is higher in the second case, illustrating the SSLIPS effect. (c-d) Series of photographs illustrating the foam flowing on surfaces. The colors match the legend of the plot. The first one correspond to t=0 s, and the yellow dashed line represent the origin for the \ell distance travelled by the foam. The time step between consecutive images is 0.5 s. The movie is provided in SI. 2 Foam slippage on textured surfaces 2.1 Preparation of textured surfaces Textured surfaces are produced in two steps. First, a counter mold is made by spin coating SU8 resist (2010, 2025, 2100 Kayaku AdvancedMaterial) on a silicon wafer (Eloïse 6") to produce a uniform thickness b . The coating is pre-baked at 90°C during two minutes and then, exposed to UV light with a mask corresponding to a square lattice of square holes by using optical lithography (MicroWriter ML 3s, Durham Magneto Optics Ltd). The uncured resist is removed with MicroChem’s SU8 developer to get the final counter mold. The final dimensions of the patterns are 12 cm by 5.5 cm. Second, we prepare polydimethylsiloxane elastomer (PDMS, Silgard 184, Dow Corning) with a 10:1 ratio between the monomer and the cross-linker. The mixture is degassed, poured on the counter mold, and cured. The PDMS layer is peeled off the surface and chemically bonded on a microscope glass slide ( 12\times 5 cm 2 , Ted Pella) by a plasma treatment. The excess of PDMS is trimmed at the edges of the glass sheet with a razor blade. The characteristics of the pattern are checked with an optical profiler (Ametek Taylor Hobson CCI HD). The geometry of our textured surfaces consists in pillars of height b organized on a square lattice. Pillars have a square cross-section of width a and the edge-to-edge distance between pillars is also a . A first set of surfaces, called isometric, are made with a=b=60 \mu m and a=b=100 \mu m, and a second set has a constant lattice parameters a=60 \mu m and the height b varies between 10 and 80 \mu m. Prior to each experiment, the surface is activated with a plasma generator (Kreisler) and prewetted with the foaming solution to prevent film bursting when the substrate is inserted in the foam. Then, the probing surface is attached to a force sensor to perform stress measurements. 2.2 Observations Recently, we have shown that the textured surfaces have two different wetting states when they are placed in contact with a liquid foam [ 16 ] . The two relevant length scales are a , the size of the asperities and r_{\rm pb} , the radius of curvature of the Plateau borders. When the Laplace pressure of the foam is higher than the capillary pressure associated with the size a of the asperities, a/r_{\rm pb}>1 , we found that the soap films in contact with the surface are sitting between the asperities, leading to zigzag bubble contacts. In contrast, for the opposite situation a/r_{\rm pb}<1 , the bubble footprint on the surface is

Read the complete text