Tunable mechanical properties and air-based lubrication in an acoustically levitated granular material
Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger · 2024
Read Tunable mechanical properties and air-based lubrication in an acoustically levitated granular material by Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-13282.txt.
Introduction
Nina Brown and co-authors shear floating rafts of grains held together by sound, in this 2024 paper. Particles levitated in an acoustic cavity clump into free-floating sheets, bound by forces whose strength the sound field sets at will. That makes the rafts a handy testbed for sticky grains, whose grip is hard to tune in ordinary piles.
The team deformed rafts of spheres and charted how stiffness answers to sound pressure. They then mixed sand with tiny spheres wrapped in thin air films, which slide almost freely. The mix lets them study how such slick grains lubricate a sticky mass.
Catalog record
| CREATOR | Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 36 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-13282
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Tunable mechanical properties and air-based lubrication in an acoustically levitated granular material Nina M. Brown, Bryan VanSaders, Jason M. Kronenfeld, Joseph M. DeSimone, Heinrich M. Jaeger Abstract Cohesive granular materials are found in many natural and industrial environments, but experimental platforms for exploring the innate mechanical properties of these materials are often limited by the difficulty of adjusting cohesion strength. Granular particles levitated in an acoustic cavity form a model system to address this. Such particles self-assemble into free-floating, quasi-two-dimensional raft structures which are held together by acoustic scattering forces; the strength of this attraction can be changed simply by modifying the sound field. We investigate the mechanical properties of acoustically bound granular rafts using substrate-free micro-scale shear tests. We first demonstrate deformation of rafts of spheres and the dependence of this deformation on acoustic pressure. We then apply these methods to rafts composed of anisotropic sand grains and smaller spheres, in which the smaller spheres have a thin layer of air separating them from other grain surfaces. These spheres act as soft, effectively frictionless particles that populate the interstices between the larger grains, which enables us to investigate the effect of lubricating the mixture in the presence of large-grain cohesion. keywords Granular material, acoustic levitation 1 Introduction Typical granular materials interact primarily via friction, while cohesive granular materials have additional interparticle forces that change both local and bulk behavior. For example, in geophysical mixtures such as wet soil, particles are often connected by forces due to capillary bridges [ 1 ] , fine powders in industrial settings can experience cohesion from van der Waals or electrostatic forces [ 2 , 3 ] , and regolith is bound partly by gravity to asteroids in space [ 4 ] . In investigating cohesive granular materials the strength of cohesive interactions is mainly altered in one of two ways: changing how samples are prepared or changing the magnitude and direction of fields applied to particles with specific materials properties. Glass beads coated with polymer can be prepared with different interaction strengths by varying the coating thickness, particle size, or stiffness of the coating material [ 5 , 6 ] . In this case, tuning cohesion requires the preparation of different batches of particles, and the interaction strength cannot be changed in situ or for the same sample. An alternative approach makes use of magnetic forces to introduce cohesion [ 7 , 8 ] . Here, the cohesion between particles can be altered continuously and in situ by changing an externally applied magnetic field. For example, applying a magnetic field to a sample of ferromagnetic grains can significantly affect the packing structures that form in the bulk and the flow rate [ 9 , 10 ] . However, this approach requires particles made from magnetizable material. Acoustic levitation offers another alternative. Sound can couple to solids of practically any material, size, and shape. Acoustic interactions can be attractive as well as repulsive, can easily be tuned by adjusting the strength of the sound field, and, as long as the particles are solid, these interactions effectively do not depend on particle composition. Sufficiently intense sound can lift particles of up to few millimeters in size against gravity, and sound-induced attractive forces among levitating particles can then assemble them into freely floating granular rafts. Such rafts are comprised of a monolayer of particles and thus effectively form a two-dimensional granular model system, which allows for direct observation and tracking of individual particles in a containerless environment, i.e., without being influenced by contact with walls or a substrate. In addition, we recently developed a method to apply stress or strain to levitating rafts, making it possible to perform a variety of load tests similar to standard materials testing [ 11 ] . For acoustic levitation in air, ultrasound in the range 30-100 kHz is typically used. Under these conditions, solid particles larger than about 70 \upmu m experience sound-induced forces that are primarily attractive, while smaller particles also experience significant repulsive forces [ 12 ] . The smaller ‘fines’ can therefore interact without making contact, opening up compelling routes for investigating granular lubrication. Granular flows can be lubricated by adding smaller particles, either cohesionless hard grains or soft cohesive powders [ 13 , 14 ] . Hard grains can act as ball bearings, forcing larger grains apart and reducing the net frictional force between grain surfaces, while grains of soft solid materials or hydrogels can act as compressible ball bearings or form a lubricating layer between surfaces [ 15 ] . Adding self-repelling magnetic particles to neutral granular systems has been shown to help prevent clogging for flows passing through narrow apertures [ 16 ] , but may not improve overall flow rates beyond what is expected for the addition of neutral small particles [ 17 ] . Studies have also shown that near-frictionless soft particles experience clogging much more rarely than their hard, frictional counterparts [ 18 , 15 ] , suggesting that they may enhance flow. Here, we discuss levitated granular materials with sound-induced attractive interactions that are easily tuned in situ . We explore the mechanical properties of granular rafts by performing shear tests, applying this approach to mesoscale samples composed of spheres or anisotropic sand grains. We then add smaller spheres to these rafts to probe granular lubrication. 2 Acoustic levitation When an ultrasound source is placed half a wavelength away from a reflector, a standing wave forms. For a 40 kHz ultrasound wave in air, the wavelength is \lambda\approx 8.5 mm. Objects can be levitated and trapped at the low-pressure zones at the wave nodes. The acoustic radiation force which levitates particles is often referred to as the primary force. A conservative force, it can be computed from the gradient of the acoustic radiation potential, written as \displaystyle U_{\text{rad}}(\mathbf{r})=\frac{4\pi a^{3}}{3}\bigg[\frac{1}{2\rho_{0}c_{0}^{2}} \displaystyle f_{0}\left\langle p(\mathbf{r},t)^{2}\right\rangle \displaystyle-\frac{3}{4}\rho_{0} \displaystyle f_{1}\left\langle|\mathbf{v}(\mathbf{r},t)|^{2}\right\rangle\bigg], (1) where a is particle radius, \rho_{0} and c_{0} are the density and sound speed in air, respectively, p(\mathbf{r},t) and \mathbf{v}(\mathbf{r},t) are the pressure and velocity fields, and the angled brackets denote a time average [ 19 , 12 ] . The f_{i} are scattering coefficients, defined as f_{0}=1-\frac{c_{0}^{2}\rho_{0}}{c_{p}^{2}\rho_{p}},~~f_{1}=\frac{2(\rho_{p}/\rho_{0}-1)}{2(\rho_{p}/\rho_{0})+1} (2) where \rho_{p} and c_{p} are the density of the particle material and its sound speed. From Eq. 2 we find that for any solid the density contrast with air is sufficiently large that to very good approximation f_{0}\approx f_{1}\approx 1 . Under these conditions, the acoustic potential in Eq. 1 is minimized where the mean square sound pressure \left\langle p(\mathbf{r},t)^{2}\right\rangle=0 , i.e., the primary acoustic force drives objects to levitate in a pressure nodal plane. When multiple objects are present in an acoustic cavity, sound scattered off their surfaces changes the pressure and velocity fields in Eq. 1 , and this results in secondary interparticle forces. These secondary scattering forces are anisotropic: they are attractive within the nodal plane but repulsive along the levitation axis. For two spheres trapped in the nodal plane by the primary force, the secondary scattering force within the levitation plane can be computed (neglecting viscous effects) as \mathbf{F}_{sc}\simeq-\frac{E_{0}a^{6}}{r^{4}}, (3) where r is the interparticle distance, the minus sign indicates that the force is attractive, and E_{0} is the (constant) acoustic