Confocal polarization tomography of dielectric nanocavities
F. Schröder, M. P. van Exter, M. Xiong, G. Kountouris, M. Wubs, P. T. Kristensen, N. Stenger · 2024
Read Confocal polarization tomography of dielectric nanocavities by F. Schröder, M. P. van Exter, M. Xiong, G. Kountouris, M. Wubs, P. T. Kristensen, N. Stenger (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-12943.txt.
Introduction
Frederik Schröder and six co-authors wrote this 2024 arXiv paper on probing tiny light traps called dielectric nanocavities. These cavities squeeze light into spaces smaller than its wavelength, which makes them hard to study. The team used polarization tomography, reading how the cavity reflects light of each polarization, in a tightly focused setup.
The reflection peak changed shape sharply with polarization. At one setting the peak turned clean and simple, and the background haze nearly vanished over a range of colors. That clear view exposed a second resonance no experiment had reported for these cavities. Even at polarizations where symmetry says the signal should vanish, traces of the modes stayed visible. The method gives physicists a sharper lens on structures meant for future light-based devices.
Catalog record
| CREATOR | F. Schröder, M. P. van Exter, M. Xiong, G. Kountouris, M. Wubs, P. T. Kristensen, N. Stenger |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 52 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-12943
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Confocal polarization tomography of dielectric nanocavities F. Schröder, M. P. van Exter, M. Xiong, G. Kountouris, M. Wubs, P. T. Kristensen, N. Stenger Abstract We employ polarization tomography to characterize the modal properties of a dielectric nanocavity with sub-wavelength mode confinement. Our analysis of reflection spectra shows that the Fano-lineshape depends strongly on the polarization in a confocal configuration, and that the lineshape can be transformed into a Lorentzian-like peak for a certain polarization. For this polarization setting, the background is almost fully suppressed in a finite range of frequencies. This enables us to identify another resonance that has not yet been experimentally reported for these nanocavities. Lastly, we use symmetry-forbidden polarizations and show that, surprisingly, the modal resonance features of the system remain visible. I Introduction Optical nanocavities, such as photonic crystal cavities [ 1 , 2 ] and nanobeam cavities [ 3 ] , play a crucial role in enhancing light-matter interactions [ 4 ] and are vital for applications ranging from efficient nanolasers [ 5 , 6 ] to quantum technologies [ 7 , 8 , 9 , 10 ] . Recent breakthroughs in dielectric cavity design have enabled confinement of electromagnetic fields on sub-wavelength scales [ 11 , 12 , 13 , 14 , 15 , 16 , 17 ] . In particular, cavities resulting from inverse design by topology optimization [ 18 , 19 , 20 ] have been realized in silicon [ 16 ] and indium phosphide [ 17 ] and have inspired further simplified designs [ 21 ] . Importantly, these extreme dielectric confinement (EDC) cavities are not limited by absorption in the material and can achieve quality factors several orders of magnitude higher than those of plasmonic structures [ 22 , 23 , 24 ] . The emergence of EDC cavities therefore represents a paradigm shift in device design, in which their strong field enhancements, typically achievable only with plasmonic systems but without the associated losses, open the door to unique light-matter interaction regimes. To fully harness the potential of EDC cavities, it is essential to analyze their spatial and spectral properties in detail. Polarization-based tomography in a confocal microscope [ 25 ] is an effective technique for mode identification, which enables characterization of the associated resonance energies, polarization states, linewidths, and spatial distributions, even though the resolution is limited by the spot size of the focused light beam. This versatile method has been successfully applied to various photonic structures, including photonic crystals [ 26 ] and vertical-cavity surface-emitting lasers [ 27 , 28 ] . Reflection spectra of EDC cavities typically have a Fano lineshape [ 16 , 17 , 15 ] , resulting from interference of a spectrally narrow resonance with a slowly varying background [ 29 ] , also observed in other types of cavities, like photonic crystal cavities [ 30 , 31 ] and plasmonic resonators [ 32 , 33 ] . This complicates the identification and quantification of resonance energies and quality factors , and understanding and exploiting this interference effect has attracted much interest [ 34 , 33 , 35 , 36 , 37 , 38 ] . Several publications also consider the influence of polarization on the Fano lineshape [ 39 , 40 , 41 , 42 , 43 ] , and theoretical studies have investigated polarization-dependent lineshape in photonic crystal cavities [ 44 ] . In this work, we present an adapted method of polarization tomography to explore the spectral, spatial, and polarization properties of topology optimization-inspired EDC cavities. Our approach goes beyond conventional cross-polarization configurations by incorporating variation in the polarization angles. We show that the reflection measurements in a confocal geometry depends crucially on the polarization , and we exploit this fact to demonstrate that the background can be completely eliminated over specific frequency ranges and for a certain elliptical polarization projection of the detected light. The lineshape transforms into a Lorentzian-like peak , and the approach enables the isolation of spectrally close resonances that are difficult to distinguish in standard configurations . In this way we identify an otherwise hidden feature in the experimental spectrum, which we are able to identify with numerical simulations. This general method can be applied to other types of nanocavities and complements scattering-type scanning near-field optical microscopy measurements by providing precise information about cavity polarization properties while eliminating interference effects. We find, that the method offers impressive detail in characterizing EDC cavities, which is crucial for optimizing light-matter interactions. This, in turn, enables design and modeling of future devices exploiting nonlinearities at the single-photon level for quantum information processing [ 45 ] and for the development of low-noise lasers for energy-efficient optical communications [ 46 ] . II Polarization tomography of cavity resonances Polarization tomography can be conveniently performed using reflection spectroscopy in a confocal geometry, in which focused input and output beams are used, respectively, to illuminate the sample and collect the scattered light. The superior spatial control of this setup enables a selective excitation of specific resonances and a tailored background suppression. Following the ideas of coupled-mode theory for describing coupled cavity-waveguide systems [ 47 ] , we take the illumination and collection to be described by the two-dimensional vector functions \vec{S}_{\text{in}}(\omega) and \vec{S}_{\text{out}}(\omega) . They relate to the electric field in the focal plane via \vec{E}(x,y,\omega)=\sqrt{\frac{\epsilon_{0}}{2}}f_{\mathrm{c}}(x,y)\vec{S}(\omega) , where f_{\mathrm{c}}(x,y) describes the electric-field distribution in the focal plane governed by the optical setup [ 48 ] . For most setups, f_{\mathrm{c}}(x,y) is a two-dimensional Gaussian function. Without loss of generality, we scale the vector functions so that |\vec{S}_{\text{in}}(\omega)|^{2} and |\vec{S}_{\text{out}}(\omega)|^{2} provide the delivered input and collected output power, respectively, and for a chosen focal point of the illumination and collection optics \mathbf{r}_{0}=(X,Y,Z) we can relate them by use of a 2\times 2 reflection matrix r(\omega) as \begin{pmatrix}S_{\mathrm{out},x}(\omega)\\ S_{\mathrm{out},y}(\omega)\end{pmatrix}=\begin{pmatrix}r_{xx}(\omega)&r_{xy}(\omega)\\ r_{yx}(\omega)&r_{yy}(\omega)\end{pmatrix}\begin{pmatrix}S_{\mathrm{in},x}(\omega)\\ S_{\mathrm{in},y}(\omega)\end{pmatrix}. (1) In general, r(\omega) , and in turn \vec{S}_{\text{out}}(\omega) , depend on the focal point position \mathbf{r}_{0} with respect to the cavity, and we exploit this dependence to characterize the spatial properties of the detected signal in Sec. IV . If the sample has x and y mirror symmetry, and if the illumination and detection are on-axis, the off-diagonal elements of r(\omega) vanish. Practical samples are never perfect, and small deviations from mirror symmetry in sample or optical alignment can create small but non-zero off-diagonal elements. Contrary to the off-diagonal elements, the on-diagonal coefficients can be relatively large and contain signatures of different resonances that typically couple primarily to x - or y -polarized input or output. In optics, sharp spectral resonances are often situated on top of a broad spectral background and are visible as Fano profiles [ 49 ] . For a single resonance, the spectrum of the combined field can then be written as \vec{S}_{\mathrm{out}}(\omega)=\vec{b}(\omega)+\frac{\vec{a}}{1-\mathrm{i}(\omega-\omega_{0})/\gamma}\,, (2) where \vec{a} is a two-dimensional vector related to the field of a discrete mode that resonates at frequency \omega_{0} with a damping rate \gamma and quality factor Q=\omega_{0}/(2\gamma) . Mathematically, the discrete modes are known as quasinormal modes [ 50 , 51 , 52 , 53 ] or resonant states [ 54 , 55 , 56 ] , and are defined as solutions to the wave equation with suitable radiation conditions to model light propagating