The interdependence between density PDF, CMF and IMF and their relation with Mach number in simulations

A. Núñez-Castiñeyra, M. González, N. Brucy, P. Hennebelle, F. Louvet, F. Motte , · 2024

Read The interdependence between density PDF, CMF and IMF and their relation with Mach number in simulations by A. Núñez-Castiñeyra, M. González, N. Brucy, P. Hennebelle, F. Louvet, F. Motte , (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-12809.txt.

Introduction

Star clouds do not hand out star masses at random, and Nuñez-Castiñeyra and co-authors asked how the local turbulence of a cloud steers the spread. They ran fluid simulations of small star-forming patches, setting the turbulence to Mach numbers of 1, 3.5, and 10, at two average densities. Then they read off three linked distributions: the gas density spread, the cloud mass function, and the initial mass function of the stars that form.

The three moved together. Where turbulence ran low and gravity took charge, the gas spread took a power-law shape and the mass functions turned top-heavy, favoring big objects. Where turbulence ruled, the gas spread looked lognormal and the mass functions resembled the classic Salpeter form. The authors conclude that the level of turbulence is a key dial setting how mass is shared out in a star-forming region.

Catalog record

CREATORA. Núñez-Castiñeyra, M. González, N. Brucy, P. Hennebelle, F. Louvet, F. Motte ,
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE47 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-12809

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

The interdependence between density PDF, CMF and IMF and their relation with Mach number in simulations A. Núñez-Castiñeyra, M. González, N. Brucy, P. Hennebelle, F. Louvet, F. Motte , Abstract Context. The initial mass function (IMF) of stars and the corresponding cloud mass function (CMF), traditionally considered universal, exhibit variations that are influenced by the local environment. Notably, these variations are apparent in the distribution’s tail, indicating a possible relationship between local dynamics and mass distribution. Aims. Our study is designed to examine how the gas PDF , the IMF and the CMF depend on the local turbulence within the interstellar medium (ISM). Methods. We run hydrodynamical simulations on small star-forming sections of the ISM under varying turbulence conditions, characterized by Mach numbers of 1, 3.5, and 10, and with two distinct mean densities. This approach allowed us to observe the effects of different turbulence levels on the formation of stellar and cloud masses. Results. The study demonstrates a clear correlation between the dynamics of the cloud and the IMF. In environments with lower levels of turbulence likely dominated by gravitational collapse, our simulations showed the formation of more massive structures with a powerlaw gas PDF, leading to a top-heavy IMF and CMF. On the other hand environment dominated by turbulence result in a lognormal PDF and a Salpeter-like CMF and IMF. This indicates that the turbulence level is a critical factor in determining the mass distribution within star-forming regions. 1 Introduction The stellar initial mass function (IMF), defined as the number density of stars per logarithmic mass interval, dN/d\log M has been the subject of extensive research across various settings, including the Galactic field, young clusters, star-forming regions, as well as the Galactic bulge, halo, and high-redshift galaxies. This research aims to uncover the physical principles shaping its pattern (refer to Kroupa 2002 , Chabrier 2003 and Hennebelle & Grudić 2024 for comprehensive reviews). Understanding the IMF accurately remains a critical, yet unresolved, challenge in astrophysics. The IMF is crucial for linking stellar and galactic evolution and influences the universe’s chemical composition, luminosity, and baryonic content. Additionally, many analyses of the prestellar dense core mass function (CMF) have investigated whether it mirrors the IMF, primarily because it has been proposed that they could present similar forms ( André et al., 2010 ; Könyves et al., 2015 , see for instance) . In particular, the exponent of the power-law, \alpha , where \displaystyle{dn\over d\log m}\propto m^{-\alpha+1}. (1) that is usually used to describe the stellar mass distribution, has been found to be comparable both for the IMF and for the CMF with typical reported values for \alpha close to 2.35 as originally inferred by Salpeter (1955) although significantly shallower values have also been reported. In the literature, the index may also be found as \Gamma_{IMF}=-\alpha+1 . Another important feature is the peak of the IMF which is usually observed to occur at about 0.3 M_{\odot} . Typically, the CMF is observed to shift by a factor of 2 to 4 towards higher masses relative to the IMF ( Motte et al., 1998 ; Testi & Sargent, 1998 ; Johnstone et al., 2000 ; André et al., 2007 ; Alves et al., 2007 ; André et al., 2010 ; Könyves et al., 2015 ) although Louvet et al. (2021) claim that the peak of the CMF that has been reported so far is determined by the instrumental resolution. For a relation to hold between the CMF and the IMF, there must be a sufficiently accurate correlation between the mass of protostellar cores and the ultimate mass of stars. However, accurately assessing this correlation continues to be a significant challenge ( Smith et al., 2009 ; Ntormousi & Hennebelle, 2019 ; Smullen et al., 2020 ; Pelkonen et al., 2021 , e.g.) . The shape of the IMF in most studies is derived by constructing a histogram of stellar masses (or their logarithmic values) in equally sized bins, followed by fitting one or several functional forms. Minimizing the chi-square of the fit allows for the derivation of fit parameters. In the intermediate to high-mass regimes, the slopes derived from this method range between 0.7 and 2 when stellar masses are binned logarithmically. Although it is often stated in the literature that the derived values are consistent with the Salpeter slope within the 1 \sigma uncertainty, the clarity of this claim is questionable ( Dib, 2014 ) . An examination of the slope values in this mass regime for several clusters, which employed identical data reduction algorithms and theoretical evolutionary tracks for deriving stellar masses, suggests that the IMF slopes for these clusters do not agree within 1 \sigma uncertainty level ( Sharma et al., 2008 ; Lata et al., 2010 ; Tripathi et al., 2014 ) . Figure 1 : Column density maps for all runs growing in Mach number from left to right and in mean density from top to bottom. This images correspond to the moment when all run have deposit similar amount of mass into stellar particles. It is becoming increasingly evident that the density structure of the interstellar medium (ISM), where cores form, is predominantly influenced by supersonic turbulence across a broad spectrum of scales ( Elmegreen & Scalo, 2004 ; Mac Low & Klessen, 2004 ; McKee & Ostriker, 2007 ) . A common result of this turbulence is the convergence of the density distribution toward a lognormal probability distribution function (PDF), where the dispersion exhibits a clear dependence on the Mach number (see Vazquez-Semadeni, 1994 ; Padoan et al., 1997 ; Scalo et al., 1998 ; Ostriker et al., 1999 also see Hopkins (2013) for a more robust PDF description and Brucy et al. (2024) and Hennebelle et al. (2024) for its relation with simulation and star formation theories). The IMF has been derived from numerical simulations using Lagrangian sink particles ( Krumholz et al., 2004 ; Bleuler & Teyssier, 2014 , e.g.) . Several studies have been carried out along the years and early calculations include for instance Bate & Bonnell (2005) ; Padoan & Nordlund (2002) ; Tilley & Pudritz (2004) ; Li et al. (2004) ; Ballesteros-Paredes et al. (2006) ; Padoan et al. (2007) . Two main numerical setups are used to compute the IMF, on one-hand isolated turbulent collapsing clumps ( Bate, 2009 ; Ballesteros-Paredes et al., 2015 ; Lee & Hennebelle, 2018 , e.g.) and on the other-hand, driven turbulence periodic boxes ( Haugbølle et al., 2018 ; Mathew et al., 2023 , e.g.) . In the former configuration, a turbulent velocity field is initialised and the collapsing clump is then evolving without further driving. Lee & Hennebelle (2018) have investigated the influence of the initial virial parameter, \alpha_{vir} , of the collapsing clump (see their figure 7) between \alpha_{vir}=0.1 to 1.5. They reported that unless \alpha_{vir}<0.3 , the influence of \alpha variation remains limited and the slope of the heavy tail of the IMF \Gamma_{IMF}=-\alpha+1 remains between -0.8 and -1. The values of \Gamma_{IMF} obtained with turbulent forcing tend to be steeper and closer to -1.3 . Indeed, the figure 9 of Haugbølle et al. (2018) reveals that between \simeq 2 and 10 M ⊙ , the stellar distribution

Read the complete text