Bayesian inference of mean velocity fields and turbulence models from flow MRI

A. Kontogiannis, P. Nair, M. Loecher, D. B. Ennis, A. Marsden, M. P. Juniper † \dagger · 2024

Read Bayesian inference of mean velocity fields and turbulence models from flow MRI by A. Kontogiannis, P. Nair, M. Loecher, D. B. Ennis, A. Marsden, M. P. Juniper † \dagger (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-11266.txt.

Introduction

Kontogiannis and co-authors solve a Bayesian inverse problem for turbulent flow in a 2024 paper. They work with the Reynolds-averaged Navier-Stokes equations, aiming to rebuild the mean flow field and learn its unknown model parameters from mean flow data at the same time. The method estimates both the most likely parameters and their uncertainty.

The team tested the algorithm on flow MRI data from a confined turbulent jet in an idealized medical device, the FDA nozzle. It rebuilt the mean flow field and learned the turbulence model parameters without overfitting. The method accepts any differentiable turbulence model, algebraic or multi-equation, and extends naturally to unsteady flows. Engineers get a principled way to learn flow models from measured data.

Catalog record

CREATORA. Kontogiannis, P. Nair, M. Loecher, D. B. Ennis, A. Marsden, M. P. Juniper † \dagger
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE25 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-11266

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Bayesian inference of mean velocity fields and turbulence models from flow MRI A. Kontogiannis, P. Nair, M. Loecher, D. B. Ennis, A. Marsden, M. P. Juniper † \dagger Abstract Bayesian inference of mean velocity fields from flow MRI We solve a Bayesian inverse Reynolds-averaged Navier–Stokes (RANS) problem that assimilates mean flow data by jointly reconstructing the mean flow field and learning its unknown RANS parameters. We devise an algorithm that learns the most likely parameters of an algebraic effective viscosity model, and estimates their uncertainties, from mean flow data of a turbulent flow. We conduct a flow MRI experiment to obtain mean flow data of a confined turbulent jet in an idealized medical device known as the FDA (Food and Drug Administration) nozzle. The algorithm successfully reconstructs the mean flow field and learns the most likely turbulence model parameters without overfitting. The methodology accepts any turbulence model, be it algebraic (explicit) or multi-equation (implicit), as long as the model is differentiable, and naturally extends to unsteady turbulent flows. 1 Introduction Probability theory ( Cox, 1946 ; Jaynes, 2003 ) provides a fundamental and rigorous framework for extracting information from data when we know, to some degree of certainty, what the data contain. In this approach, some parameters are fixed while others are expressed as probability distributions ( MacKay, 2003 ; Stuart, 2010 ; Ghattas & Willcox, 2021 ) . These distributions are initially asserted by the user and are then updated deterministically with Bayesian inference as data arrive. If more than one model could explain the data, the likelihood of each model is calculated and the most likely model is selected ( MacKay, 2003 ) . This framework provides a principled way to tune and choose models, given the available data. This is also known as inverse problem theory, described in seminal texts such as Kaipio & Somersalo (2005) ; Idier (2002) ; Sullivan (2015) . The challenge with performing Bayesian inference on partial differential equations (PDEs) in general and fluid dynamics in particular is that function evaluations are usually expensive. This means that sampling methods such as Markov chain Monte Carlo (MCMC) or Hamiltonian Monte Carlo (HMC) quickly become intractable ( Kaipio & Somersalo, 2005 ; Sullivan, 2015 ) . For problems in which the outputs vary smoothly with their parameters, however, we can exploit the fact that Gaussian prior distributions lead to nearly Gaussian posterior distributions, meaning that Laplace’s approximation (a second-order Taylor expansion of the model output with respect to its parameters) becomes sufficiently accurate to be useful ( MacKay, 2003 ; Sullivan, 2015 ) . Laplace’s approximation can then be combined with adjoint methods such that many parameters of large PDE problems can be inferred simultaneously and cheaply. In previous studies, we have demonstrated adjoint-accelerated Bayesian inference on experimental flow MRI data from a laminar flow through a nozzle ( Kontogiannis et al., 2022 ) and a 3D-printed aortic arch ( Kontogiannis et al., 2024a ) . Flow MRI data provides three-component velocity fields in a large 3D volume. The spatial resolution is around 1 mm 3 per voxel, which is coarse compared with many optical diagnostics, and the signal-to-noise ratio (SNR) is relatively low. Nevertheless, when combined with prior knowledge that this velocity field must obey Navier–Stokes and the no-slip boundary condition, this coarse noisy flow MRI data is sufficient to infer the flow with surprising accuracy. For example, Figure 1 shows a reconstruction of 3D three-component flow MRI velocity data of steady flow through a 3D-printed aortic arch at Reynolds number 550. The raw data [Figure 1 (a)] at typical SNR is combined with prior information expressed through a Finite Element Method (FEM), which enforces conservation of mass and momentum [Figure 1 (b)]. The velocity field is inferred rapidly with adjoint-accelerated Bayesian inference [Figure 1 (c)]. The inferred velocity is almost identical to the high SNR velocity data [Figure 1 (d)], which the algorithm did not see. Furthermore, the reconstruction in Figure 1 (c) has higher spatial resolution than the high SNR data and also calculates the position of the aorta’s boundary [thin grey line in Figure 1 (c)]. The other velocity components are presented in Kontogiannis et al. (2024a) . The above studies assumed uniform viscosity. In Kontogiannis et al. (2024b) , we measured 3D steady flow MRI data of a shear-thinning jet and assimilated the flow and viscosity model simultaneously. The inferred viscosities were nearly identical to those measured in 18 separate rheometry experiments over four orders of magnitude of shear rate. This showed that it is possible to assimilate velocity data into the Navier–Stokes equations with a non-uniform viscosity model. This study extends Kontogiannis et al. (2024b) to a turbulent flow from a 10-mm diameter jet at Reynolds number 6500. The spatial resolution of flow MRI is insufficient to resolve turbulent structures in this flow, meaning that turbulence models are required to assimilate this flow MRI data. We use adjoint-accelerated Bayesian inference to combine flow MRI velocity data with prior knowledge that the data are from a turbulent jet that obeys the no-slip condition, and the RANS equations with a prescribed eddy viscosity model. We note that the local turbulent kinetic energy (TKE) can be calculated from the decay rate of the MR signal, although we do not use this information in the current paper. Figure 1 : (a) A 2D slice of 3D three-component velocity data from flow MRI through a 3D-printed aorta. This data has typical signal-to-noise-ratio (SNR) and is colored by the velocity into the page, u_{y} . (b) A diagram of our prior knowledge that this velocity data comes from a fluid that obeys the Navier–Stokes equations within a domain \Omega bounded by a no-slip surface \Gamma , a Dirichlet velocity condition on \Gamma_{i} , and a stress-free boundary on \Gamma_{o} . This prior knowledge is expressed through a finite element CFD solver in which the free parameters define the shape of \Gamma , the velocity on \Gamma_{i} , and the viscosity \mu . The optimal parameter values and their uncertainties are found with adjoint-accelerated Bayesian inference giving (c) the inferred velocity field and boundary position, which can be compared with (d) high SNR data gathered over several hours, which was not seen by the assimilation algorithm. The reconstructed field in panel (c) is a higher resolution twin of the high SNR data in panel (d) despite assimilating only the low SNR data in panel (a) and the prior knowledge in panel (b). This figure is adapted from Kontogiannis et al. (2024a) . 2 Bayesian inversion of RANS problems Given noisy flow MRI data of a mean flow, \bm{u}^{\star} , we assume that there is a RANS solution, \bm{u}^{\circ}=\bm{u}(\bm{x}^{\circ}) , that can fit the data for suitable parameters, \bm{x}^{\circ} , i.e., \bm{u}^{\star}=\mathcal{Z}\bm{x}^{\circ}+\bm{\varepsilon}\quad, (1) where \mathcal{Z}\coloneqq\mathcal{S}\mathcal{Q} is the operator that maps model parameters to model solutions projected into the data space, \mathcal{S} is the model space to data space projection operator, \mathcal{Q} is the operator that encapsulates the physical model, and \bm{\varepsilon}\sim\mathcal{N}(\bm{0},\mathcal{C}_{\bm{u}^{\star}}) is Gaussian noise with zero mean and covariance operator \mathcal{C}_{\bm{u}^{\star}} . We further assume that we have prior knowledge of the probability distribution of the model parameters, \bm{x} . We call this the prior parameter distribution,

Read the complete text