Charge management system based on disturbance observer sliding mode control for space inertial sensors
Fangchao Yang, Wei Hong, Yujie Zhao · 2024
Read Charge management system based on disturbance observer sliding mode control for space inertial sensors by Fangchao Yang, Wei Hong, Yujie Zhao (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-09643.txt.
Introduction
Fangchao Yang, Wei Hong, and Yujie Zhao design charge control for the free-floating test masses of space inertial sensors. Stray charge creates parasitic forces that eat into the noise budget of geodesy and gravitational wave missions. Ultraviolet discharge systems bleed the charge off, but sunlight shifts, aging parts, and unknown yields make the plant drift. The authors first build a physics model of fast charging and discharging for the sensor geometry.
A disturbance observer sliding mode controller then holds test mass charge under a set ceiling despite parameter swings. The design leans on the observer to cancel unknown disturbances in real time. The work targets long missions where ground retuning is impossible.
Catalog record
| CREATOR | Fangchao Yang, Wei Hong, Yujie Zhao |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 51 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-09643
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Charge management system based on disturbance observer sliding mode control for space inertial sensors Preprint: APS/123-QED Fangchao Yang, Wei Hong, Yujie Zhao Abstract Precision space inertial sensors are imperative for Earth geodesy missions, gravitational wave observations, and fundamental physics experiments in space. In these missions, free-falling test masses(TMs) are susceptible to parasitic electrostatic forces and torques, with significant contributions from the interaction between stray electric fields and TM charge. These effects can make up a sizable fraction of the noise budget. Thus, a charge management system(CMS) is essential in high-precise space-based missions. However, the operating environment for space charge control is full of uncertainties and disturbances. TM charge tracking precision is negatively affected by many physical parameters such as external charging rate, quantum yield, UV light power, etc. Those parameters are rarely measured and supposed to vary because of changes in solar activity, temperature, aging of electronic components and so on. The unpredictability and variability of these parameters affects the CMS performance in long-term space missions and must be evaluated or eliminated. This paper presents a simple physics-based model of the discharging process with high charging/discharging rate based on the geometry of inertial sensors. After that, a disturbance observer sliding mode control (DOSMC) is proposed for the CMS with parametric uncertainties and unknown disturbance to maintain the TM charge below a certain level and improve its robustness. The simulation results show that the DOSMC is able to force the system trajectory coincides with the sliding line, which depends neither on the parameters or disturbances. In this way, the DOSMC can effectively ignore the parameter perturbation and external disturbances. The control precision can reach 0.1 mV, which is superior to that of a classic proportional– integral–derivative controller and conventional sliding mode control. I Introduction Inertial sensors are an essential part of gravitational wave observatories Amaro-Seoane et al. 2017 ; Hu and Wu 2017 ; Luo et al. 2016 ; Ando et al. 2010 , satellite geodesy missions Christophe et al. 2010 ; Kornfeld et al. 2019 , and several fundamental physics experiments Sumner et al. 2007 ; Everitt et al. 2015a ; Touboul et al. 2022 . An inertial sensor(Figure 1 ) includes an isolated free-floating test mass (TM) surrounded by six pairs of sensing and actuation electrodes and three additional pairs of electrodes responsible for injecting a high-frequency voltage on the TM for position and attitude readout. The completely electrically isolated TM inevitably accumulate an unwanted level of net charge and introduce additional acceleration noise as a result of galactic cosmic rays (GCRs), solar energetic particles (SEPs), and other unknown microscopic surface effects Jafry and Sumner 1997 ; Wass et al. 2005 . Thus, the TM charge must be kept close to a zero potential. Figure 1: Schematic showing the geometry of an inertial sensor. The TM is indicated in yellow, the sensing and actuation electrodes are shown in blue, and the injection electrodes are shown in red. The UV light(purple) can be seen in the area between the -Z electrodes and TM. I.1 Charge Management System A charge management system(CMS) aims to control the TM charge in a contact-free manner by shining UV light and exploiting the photoelectric effect to avoid additional thermal noise introduced by mechanical contact. Electrons are liberated from gold-coated metallic surfaces using the photoelectric effect under illumination with UV light and move between the TM and its surroundings if the photon energy is greater than the energy required for an electron of an element to flee its valence band Olatunde et al. 2020 . The CMS is widely used in many space mission, including not only realized missions, such as GP-B Everitt et al. 2015b , LISA Pathfinder(LPF) Armano et al. 2017 , but also those future space mission, for example, LISA Amaro-Seoane et al. 2017 , TianQin Luo et al. 2016 , and Taiji Hu and Wu 2017 . Notably, in those realized missions, low-pressure mercury vapor lamps were used to generate UV light for discharge at a wavelength of 254 nm. Compared to mercury lamps, UV LEDs offer advantages in terms of size, electrical power efficiency, light weight, and low power consumption, and have been tested and identified as a new light source for future CMS Sun et al. 2006 ; Hollington et al. 2015 ; Yang et al. 2020 ; Pollack et al. 2010 . There are typically two types of charge control methods for high-precise space missions, namely fast discharge and continuous discharge Armano et al. 2018 ; Yang et al. 2023 . Both methods have been successfully used in the CMS of the LPF. Fast discharge is an open-loop control scheme, which is intended to quickly reduce the TM charge to the target level, disregarding the cause of any disturbance noise. During the mission, TMs are permitted to accumulate charge gradually over a few weeks until the absolute charge level becomes unacceptable. The TM is then rapidly discharged, typically within tens of minutes Armano et al. 2023 . Unlike fast discharge, continuous discharge is a closed-loop charge control method that aims to keep the TM charge consistently near zero by continuously illuminating the inertial sensor. The discharging rate is adjusted automatically by the controller based on TM net charge. In this way, the charging-discharging rates are balanced. Compared to fast discharge, continuous discharge scheme is more convenient and precise as it is able to automatically adjust the UV light power. Additionally, the noise generated by the continuous discharge is lower, making it more suitable for future long-term space missions. However, there are still several complicated problems that will affect or disturb the continuous long-term TM charge control. First, although SEP events occur occasionally (several times per year), the expected TM charging rate caused by these events is approximately four to five times above the level generated by the flux of GCRs and can even reach as much as 70000 es -1 at a peak flux Wass et al. 2005 . Furthermore, the output power of the UV light generated by UV LEDs will decrease by as much as 66 {\rm{\%}} for SET-240 devices and 10 {\rm{\%}} for CIS-250 devices after each device is turned on and off for about 50 days Hollington et al. 2017 . Finally, the properties of the gold-coated surfaces, such as quantum yield or work function, vary on different surfaces, or even at different times on the same surface, owing to changes in temperature, pressure, and air contamination Wass et al. 2019 . Therefore, to solve the position tracking control problem and improve the control performance of CMS under the condition of parametric uncertainties for long-term space missions, the control system is critical. I.2 Sliding mode control A proportional–integral–derivative (PID) controller is a control loop mechanism that employs feedback, is widely used in industrial control systems Bennett 1993 , which is also used in continuous discharge in CMS. However, fixed-gain PID controllers have to be retuned for different situations of radiation environments, surface properties, or output power of UV light to ensure the control performance and robustness, which is almost impossible owing to parametric uncertainties in long-term space missions. In Yang et al. 2023 , a model reference adaptive control (MRAC) is proposed for the CMS