Weak non-linearities of amorphous polymer under creep in the vicinity of the glass transition
2024
Read Weak non-linearities of amorphous polymer under creep in the vicinity of the glass transition (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-08664.txt.
Introduction
Roman-Faure and co-authors study slow stretch in a glassy polymer near its glass point. The work dates to 2024. The polymer sits in a weak bent regime, where speedup comes from small local reshuffles. Loads ran from low to mid range, and heat sat just below the glass point.
Time shifts of the stretch curves gave a broad speedup factor. That factor fell with load in a squared curve form. The curve's scale term shrank as stretch grew. Since load starts even, the broad speedup starts out as the local one, which fits a recent theory. Later shrink of the scale hints at growing load disorder.
Catalog record
| YEAR | 2024 |
|---|---|
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 35 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-08664
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Weak non-linearities of amorphous polymer under creep in the vicinity of the glass transition Abstract Martin Roman-Faure, Hélène Montes, François Lequeux, Antoine Chateauminois Soft Matter Science and Engineering (SIMM), CNRS UMR 7615, ESPCI Paris, PSL University, Sorbonne Université, F-75005 Paris, France The creep behavior of an amorphous poly(etherimide) (PEI) polymer is investigated in the vicinity of its glass transition in a weakly non linear regime where the acceleration of the creep response is driven by local configurational rearrangements. From the time shifts of the creep compliance curves under stresses from 1 to 15 MPa \mathrm{MPa} and in the temperature range between T g − 10 K T_{g}-10K and T g T_{g} , where T g T_{g} is the glass transition, we determine a macroscopic acceleration factor. The macroscopic acceleration is shown to vary as e − ( Σ / Y ) n e^{-(\Sigma/Y)^{n}} with n = 2 ± 0.2 n=2\pm 0.2 , where Σ \Sigma is the macroscopic stress and Y Y is a decreasing function of compliance. Because at the beginning of creep, the stress is homogeneous, the macroscopic acceleration is thus similar to the local one, in agreement with the recent theory of Long et al. ( Phys. Rev. Mat. (2018) 2 , 105601 ) which predicts n = 2 n=2 . For larger compliances, the decrease of the of Y Y is interpreted as a signature of the development of stress disorder during creep. I Introduction Amorphous polymer and elastomer materials have linear mechanical properties which vary drastically around their glass transition Ferry 1980 . At low temperatures, they exhibit an elastic modulus of the order of 1 GPa as a result of Van der Waal interactions between monomers Long and Lequeux 2001 . At high temperatures, their elastic modulus drops by three orders of magnitude towards about 1 MPa. In this domain, the elastic modulus is conferred by the entropy of the chains strands between cross-linking points for elastomers Rubinstein and Panyukov 2002 ; Rubinstein and Colby 2014 , or a so-called plateau modulus between entanglements for non-cross-linked polymers Ferry 1980 . Similarly, mechanical properties at high strain also vary significantly with temperature. At high temperature, in the rubbery state, the macroscopic mechanical response still arise from chain entropy. As a consequence the macroscopic mechanical response remains approximately linear over a strain amplitude of 100% Rubinstein and Panyukov 2002 . On the other hand, in the glassy state, the mechanical response originates from molecular and Van der Waals interactions between close packed monomers. Then, non-linearity finds its origin in local rearrangements Argon 1973 ; Langer 2008 ; Dequidt et al. 2016 . As a result, a macroscopic deformation of a few percent is enough to induce monomer rearrangements and to make the macroscopic response non-linear. This strong non-linearity is characterized by a stress overshoot known as the yield stress. However, in this work, we will focus on the crossover regime between glass and rubber behavior, an under-explored regime between T_{g}-10K and T_{g} , T_{g} being the glass transition temperature. In this regime, non-linearities do not appear as a yield stress, but instead as a tiny acceleration of the dynamics of rearrangements. Polymer glasses are highly disordered systems made up of nanometric domains, each of them with a specific relaxation time under thermal activation. These times are distributed over 4 orders of magnitude. This peculiar behavior is known as dynamical heterogeneities Ediger 2000 . Consequently, through the glass transition, the measurement time sweeps the distribution of local relaxation times which allows to reveal the respective role of domains with various relaxation times. In this study, we remain in a narrow temperature range, between T_{g}-10 \mathrm{k}\mathrm{e}\mathrm{l}\mathrm{v}\mathrm{i}\mathrm{n} and T_{g} in which the experimental windows overlap the relaxation time distribution of the domains. As a consequence, domains relaxation can be either faster or slower than the measurement time, depending on their relaxation time. Indeed, at the crossover between glassy and rubber states, domains rearrange under the effect of thermal agitation within a characteristic time \tau . However, under the action of a stress \sigma , the time required for rearrangement is accelerated Lee et al. 2009 ; Lee et al. 2009 ; Lee et al. 2009 ; Bennin et al. 2020 ; Loo et al. 2000 ; Pérez-Aparicio et al. 2016 ; Pérez-Aparicio et al. 2016 ; Kalfus et al. 2012 ; Bending et al. 2014 ; Hebert and Ediger 2017 , and becomes f(\sigma)\tau where f is a stress-dependent acceleration function, always smaller than unity, which tends towards 1 when \sigma tends towards zero. According to Eyring’s classical model Eyring 1936 , the acceleration function writes f=\exp^{-\sigma/Y}, (1) with Y=kT/\textit{v} , where kT is the thermal energy and v is an activation volume. However, a more recent theory Dequidt et al. 2016 ; Dequidt et al. 2012 ; Long et al. 2018 ; Conca et al. 2017 corroborated by local optical and mechanical measurements of segmental dynamics Lee et al. 2009 and strain relaxation experiments Belguise et al. 2021 suggests that the acceleration function is rather f=\exp^{-(\sigma/Y)^{2}} (2) with Y=\sqrt{2kTG^{\prime}_{0}/\xi^{3}}, (3) where G^{\prime}_{0} is the glassy elastic modulus and \xi the size of the domains. Indeed, Eyring’s expression Eyring 1936 originates from a simple linear expansion with respect to stress of the value of the energy barrier between two stable configurations of the monomers. In the Long et al. approach, the expression of the acceleration function is obtained using a different approach Long et al. 2018 ; Dequidt et al. 2016 ; Dequidt et al. 2012 ; Conca et al. 2017 which is based on an estimate of the elastic energy required to cross the barrier. Measuring and discussing the stress-dependence of this local acceleration function f in amorphous polymers from macroscopic creep experiments in the vicinity of the glass transition is the main focus of our article. Obviously, a macroscopic acceleration function can be determined from a simple comparison of the experimental linear and non-linear mechanical response of the polymer. However, the relationship between this macroscopic acceleration function and the local one is difficult to establish because of the existence of stress heterogeneities. This is obvious in the case of internal stress as shown by Hasan and Boyce Hasan and Boyce 1993 , far below T_{g} , where huge amount of stress can be stored in sample with a zero macroscopic stress. However, even in the simple cases where the sample is annealed before the measurements, the development of stresses heterogeneities during under mechanical loading can make the comparison between local stress distribution and macroscopic stress very delicate. Indeed, we have shown recently that -in the same regime around T_{g} -, during the stress relaxation resulting from a step-strain, the macroscopic acceleration function can be very different from the local one Belguise et al. 2021 and more precisely that it can exhibit a different scaling. This is due to the fact that during a step-strain, the fast decay of the macroscopic stress during the measurement near T_{g} makes the estimate of the local acceleration challenging. As discussed by Belguise et al. Belguise et al. 2021 , it requires the analysis of experimental data in the light of numerical simulations accounting for material disorder. During creep, the changes