Ray-tracing laser-deposition model for plasma particle-in-cell simulation

A. Hyder, W. Fox, K. V. Lezhnin, S. R. Totorica · 2024

Read Ray-tracing laser-deposition model for plasma particle-in-cell simulation by A. Hyder, W. Fox, K. V. Lezhnin, S. R. Totorica (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-08543.txt.

Introduction

Abdullah Hyder, Will Fox, Kirill Lezhnin, and Samuel Totorica wrote, in two thousand twenty-four, on how to add a laser to a plasma code. Such codes, called particle-in-cell codes, track swarms of sample bits on a grid to fake a full plasma. A laser that heats the plasma is hard to add well, since its force is lost bit by bit in the gas.

Their way traces rays and drops the beam's force by inverse Bremsstrahlung absorption, in which electrons gain force from the light as they hit ions. The way copes with beams that hit at a slant, and with the bounce at the deep face past which a beam can not pass. The force won is handed to electrons as random kicks. Tests set the way next to sums done by hand and to an old two-space ray code: it matched both.

Catalog record

CREATORA. Hyder, W. Fox, K. V. Lezhnin, S. R. Totorica
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE31 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-08543

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Ray-tracing laser-deposition model for plasma particle-in-cell simulation A. Hyder, W. Fox, K. V. Lezhnin, S. R. Totorica Abstract We develop a ray-tracing model for laser-plasma interaction suitable for coupling in-line into kinetic particle-in-cell plasma simulation. The model is based on inverse Bremsstrahlung absorption and includes oblique incidence effects and reflection at the critical surface. The energy deposition is given to electrons by randomized kicks to momentum. The model is verified against analytic solutions and a 2-D laser ray-tracing code. Preprint: APS/123-QED I Introduction Kinetic plasma simulations are a valuable tool for understanding high-energy-density (HED) plasma systems driven by intense radiation and energy sources [ 1 ] . Modern high-energy lasers, such as those at the National Ignition Facility (NIF) and OMEGA facility, couple several kJ of energy into \sim mm volumes of plasma within ns-timescales [ 2 ] . These lasers readily heat plasmas to keV temperatures, producing plasmas with long mean free paths. Furthermore, these plasmas can self-generate magnetic fields of 10’s of Tesla sufficient to magnetize the plasma. Kinetic simulations can be valuable tools for understanding these systems, as they do not assume local Maxwellian distributions in the plasma. They can more readily handle kinetic effects, such as particle counterstreaming and temperature anisotropy, as well as simulate kinetic plasma processes, such as the formation of collisionless shocks [ 3 , 4 , 5 ] , magnetic field generation by Weibel instability [ 6 ] , and magnetic reconnection [ 7 , 8 ] . To improve fidelity when designing and interpreting these experiments via simulations, a key step is to accurately simulate how the laser propagates and heats the plasma. For the laser pulses of interest in the present work, we consider how to model laser deposition via inverse Bremsstrahlung (IB), which is the collisional absorption of the laser photons by plasma. In this paper, we develop a radiation transport model for laser propagation and absorption suitable for coupling in-line into a kinetic plasma particle-in-cell simulation. The model traces laser intensity along rays using geometric optics, with laser absorption and energy deposition based on inverse Bremsstrahlung (IB) [ 9 ] . In this class of model, the laser-intensity envelope is simulated rather than the full-wave evolution of the electromagnetic (EM) fields. This relaxes the simulation requirements so that the laser wavelength and frequency do not have to be resolved by the simulation. This approach is often used in radiation hydrodynamics simulation (e.g., Refs. [ 10 , 11 ] ) and has been previously used in hybrid (kinetic ion) simulations [ 12 ] . This type of model has also been extended to incorporate full-wave effects near critical surfaces where the geometric optics break down [ 13 ] . We note that this approach differs from many full EM-wave simulations in laser-plasma interaction, which are most commonly used for direct simulation of laser-plasma instabilities and laser-driven particle acceleration (e.g., Ref. [ 14 ] ). Models retaining the full EM-wave propagation must resolve the laser wavelength and frequency, which is computationally demanding, so that approach is usually limited to rapid phenomena and small-volume simulations. PIC models with full EM waves and Monte-Carlo collisions have been developed to study IB [ 15 ] , though there are subtleties of the particle collisions during IB absorption [ 16 , 17 ] which may not be captured in standard PIC Monte-Carlo collision routines [ 18 ] . At an even more fundamental description, IB has also been simulated with full-wave molecular dynamics simulation [ 19 ] . This type of model imposes the minimum amount of additional assumptions and, for example, directly resolves all particle collision processes, enabling prediction of transport factors such as the Coulomb logarithm. However, this method is the most computationally expensive and prohibitive for large-volume HED plasma simulations. The model developed here follows the ray-tracing technique with IB absorption. The primary design choices were motivated by the goal of obtaining a fast, simple model that can be run in-line but with enough physics to compare to radiation-hydrodynamic simulations. This is to allow direct comparisons between a full kinetic treatment and radiation-hydrodynamic simulation of laser-heated plasmas. Rays are followed in 1-D (without refraction in the simulation domain) but with a technique that includes oblique incidence effects and ray reflection. The model is implemented in the Plasma Simulation Code (PSC) [ 20 ] . Two companion manuscripts [ 21 , 22 ] present benchmarking of the laser deposition and plasma evolution with comparison to radiation-hydrodynamic simulations, thereby presenting additional dynamical verification of this model. Section II reviews the theoretical model for calculating the power deposited by a laser when propagating through a plasma. The numerical implementation is presented in Section III . Additionally, the method for transferring the energy to the particles is described in Section III.3 . In Section IV , we present benchmarking against analytical ray-tracing solutions and another ray-tracing code, as well as benchmarking of the energy conservation. We briefly discuss some miscellaneous implementation notes of the algorithms in a parallel code in Section V , and we give our conclusions in Section VI . II Laser deposition model In this section, we recapitulate the laser propagation and inverse-Bremsstrahlung absorption in a plasma to present the model equations for ray-tracing and energy deposition. For a laser propagating through a plasma, it is convenient to follow the laser intensity along rays rather than the full EM field evolution. This approach is valid when the laser wavelength is much shorter than other scales in the plasma. In this case, the laser propagation follows from geometric optics, which involves refraction and reflection when propagating through density gradient regions, and absorption. The spatial absorption of the laser energy due to collisions in the plasma is given by P_{\text{abs}}=KI_{s}=-\frac{dI_{s}}{ds}, (1) where s indicates the spatial distance along the ray path. Here we use I_{s} as the laser intensity through a plane normal to s . Following Dawson, et al. [ 9 ] , the inverse-Bremsstrahlung absorption coefficient K for a plasma is K=K_{0}\frac{n_{e}^{2}}{n_{\rm cr}}\frac{1}{(1-n_{e}/n_{\rm cr})^{1/2}}, (2) where K_{0} is the absorption factor, n_{e} is the local electron density, and n_{\rm cr} is the critical density [ 9 ] . At the critical density n_{\rm cr} , the laser frequency \omega=2\pi f equals the local plasma frequency \omega_{\rm pe}=(4\pi n_{e}e^{2}/m_{e})^{1/2} . The absorption factor K_{0} is K_{0}=\frac{4}{3}\left(\frac{2\pi}{m_{e}}\right)^{1/2}\frac{Z_{{e\!f\!\!f}}e^{4}}{c\,(k_{B}T_{e})^{3/2}}\ln{\Lambda_{\rm IB}}, (3) Here m_{e} is the electron mass, Z_{{e\!f\!\!f}}=(1/n_{e})\sum_{i}n_{i}Z_{i}^{2} is the effective ion charge for collisions summed over ion species i , e is the electron charge, c is the speed of light, k_{B} is the Boltzmann constant, T_{e} is the electron temperature, and \ln{\Lambda}_{\rm IB} is the Coulomb logarithm for IB [ 16 ] . In conventional units, K=9.74\times 10^{-17}\;\frac{n_{e}^{2}}{n_{\rm cr}(1-n_{e}/n_{\rm cr})^{1/2}}\frac{Z_{e\!f\!\!f}\ln\Lambda_{\rm IB}}{T_{e}^{3/2}}\;\mathrm{cm}^{-1} (4) with densities in cm -3 and temperatures in eV. As described in Johnston, et al. [ 16 ] , the Coulomb logarithm for a high-frequency laser-plasma interaction, when \omega>\omega_{pe} , differs from the standard Coulomb log for low-frequency transport [ 23 ] by the replacement v_{te}/\omega_{pe}\to v_{te}/\omega in evaluating the collisional maximum impact parameter. Recent work [ 17 ] highlighted the importance of such corrections, among other atomic physics-related corrections, to correctly predict laser absorption via IB in an experiment. (To allow

Read the complete text