Atomic-optical interferometry in fractured loops: a general solution for Rydberg radio frequency receivers
Bartosz Kasza, Sebastian Borówka, Wojciech Wasilewski, Michał Parniak · 2024
Read Atomic-optical interferometry in fractured loops: a general solution for Rydberg radio frequency receivers by Bartosz Kasza, Sebastian Borówka, Wojciech Wasilewski, Michał Parniak (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-07632.txt.
Introduction
Bartosz Kasza, Sebastian Borowka, Wojciech Wasilewski, and Michal Parniak tackle a theory problem for atomic radio receivers in a 2024 paper. Some receiver designs use atoms where several light paths interfere, which allows phase sensitive detection of radio waves. In such loop designs, the atoms never settle into a steady state, so standard theory cannot predict limits such as bandwidth or saturation.
The authors propose a method based on expanding the non steady state in a Fourier series. The method runs well on a computer and can predict edge cases such as saturation. As a worked example, they fully describe a receiver design based on highly excited atoms. Their results give practical limits for atomic sensing tools.
Catalog record
| CREATOR | Bartosz Kasza, Sebastian Borówka, Wojciech Wasilewski, Michał Parniak |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-07632
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Atomic-optical interferometry in fractured loops: a general solution for Rydberg radio frequency receivers Bartosz Kasza, Sebastian Borówka, Wojciech Wasilewski, Michał Parniak Abstract The development of novel radio frequency atomic receivers brings attention to the theoretical description of atom-light interactions in sophisticated, multilevel schemes. Of special interest, are the schemes where several interaction paths interfere with each other, bringing about the phase-sensitive measurement of detected radio fields. In the theoretical modeling of those cases, the common assumptions are often insufficient to determine the boundary detection parameters, such as receiving bandwidth or saturation point, critical for practical considerations of atomic sensing technology. This evokes the resurfacing of a long-standing problem on how to describe an atom-light interaction in a fractured loop. In such a case, the quantum steady state is not achieved even with constant, continuous interactions. Here we propose a method for modeling of such a system, basing our approach on the Fourier expansion of a non-equilibrium steady state. The proposed solution is both numerically effective and able to predict edge cases, such as saturation. Furthermore, as an example, we employ this method to provide a complete description of a Rydberg superheterodyne receiver, obtaining the boundary parameters describing the operation of this atomic detector. I Introduction Figure 1: (a) Closed atomic loop. (b) Fractured atomic loop with a fracture \delta . The modeling of continuous experiments in hot atomic vapors oftentimes relies on the presumption of a steady state, which is achieved by the atomic medium perpetually interacting with the E-M (electromagnetic) fields. This approach greatly simplifies the optical Bloch equations, removing the time-dependence, and has proven to be a very important tool in describing atomic-optical interactions semiclassically in many practical scenarios. However, there exists an inherent limitation to this approach, as the steady state cannot be achieved if the fields interacting with atoms form a fractured (as opposed to closed) interferometric loop, exemplified in the Figure 1 , effectively beating via the atomic medium, such as when two separate fields are addressing the same transition. In particular, this lack of complete modeling approach becomes apparent in many cases of atom-based RF (radio frequency) receivers, where the presumption of steady state solution implies that their response to the detected fields cannot be modeled at non-zero bandwidth. The consideration of loop-type interactions in atomic media is not a particularly recent topic. In the study of multi-level atoms, the loop-type schemes were investigated for 3-level Tsukada et al. 1980 and 4-level loops Sharma and Roversi 1984 ; Krinitzky and Pegg 1986 . Such configurations were proposed as interfaces for phase sensitive measurements of E-M fields Buckle et al. 1986 later expanded to more complex systems Kosachiov et al. 1992 and particularly analyzed in a diamond-like configuration Morigi et al. 2002 ; Kajari-Schröder et al. 2007 . The analysis of other effects in loop-type configurations included coherent population trapping Maichen et al. 1996 , the investigation of EIT (electromagnetically induced transparency) phenomena in double \Lambda setup, which showed that there is crucial impact of relative phases in closed loops Korsunsky et al. 1999 ; Korsunsky and Kosachiov 1999 , and the usage of the STIRAP (stimulated Raman adiabatic passage) method which lead to entanglement control of two-qubits systems Malinovsky and Sola 2004a ; Malinovsky and Sola 2004b . It is important to note that, in all of these considerations, only the cases of closed loops were fully addressed. However, the topic has resurfaced in the context of Rydberg atomic RF receivers, where the atomic-optical interferometry brings a promise to enhance the measurements of MW (microwave) fields. A proposal for a Rydberg MW sensor utilizing a loop configuration was presented Shylla et al. 2018 , and later experimental demonstrations appeared in different realizations Anderson et al. 2022 ; Berweger et al. 2023a ; Borówka et al. 2024a . Employing various EIT effects in energy level loop configurations in this new kind of atomic-optical interferometer gave rise to a new method for phase-sensitive MW electrometry, yet its modeling is still limited to closed-loop schemes, which does not allow the theoretical considerations of the bandwidths of such receivers. Even though this discrepancy is most clearly demonstrated for diamond-like loop configurations, by extension it can be translated to the more prominent atomic mixers/superheterodyne receivers Simons et al. 2019 ; Gordon et al. 2019 ; Jing et al. 2020 . These schemes can be treated analogously to fractured loops with the detuning present between LO (local oscillator) and signal field detected in a certain bandwidth. Here we propose a general approach of solving fractured loop schemes based on Fourier decomposition of non-equilibrium steady state (NESS) Ikeda and Sato 2020 applicable for any arbitrary loop fracture and energy level structure, so long as the driving fields can be uniquely mapped to energy levels transitions. Basing our approach on the density matrix formalism, we describe the necessary assumptions and transformations, finalizing with the Fourier mode decomposition, which is strictly connected with Floquet-Liouville supermatrix eigenvalue problem Ho and Chu 1985 ; Ho et al. 1986 . As shown in multiphoton resonances case, the periodic, time-dependent equations are transformed into the time-independent matrix problem without using perturbation. This method is numerically effective and convenient to implement on any computational platform. In particular, we use this method to simulate properties of a Rydberg RF superheterodyne receiver for typical experimental parameters. The considerations of loop fracture and signal field intensity allow for predictions of the superheterodyne receiver’s bandwidth, saturation point and linearity – the key performance parameters in RF detection. These parameters cannot be properly acquired with the small detuning and weak signal approximations, which are commonly used in the modeling of Rydberg superheterodyne receivers Jing et al. 2020 ; Liu et al. 2022 ; Ren et al. 2024 ; Wu et al. 2023 . We consider a model neglecting the Doppler effect, which needs to be introduced effectively as a correction in the further considerations. Therefore, we are effectively considering a single velocity class, which is often, practically, a reasonable approach. However, we do introduce the effects of transit-time broadening, which proved to be crucial in properly explaining the behavior of Rydberg atomic schemes Fan et al. 2015 . This article is organized as follows. In Section II , we introduce the model, the Hamiltonian in the presence of fracture \delta , and decoherence. In Section III , we apply Fourier series expansion to NESS and derive a numerically efficient solution by separating the ground state repopulation. In Section IV , we investigate an example of the superheterodyne detection scheme, for which we perform numerical calculations and analysis. We draw the conclusion in Section V and discuss possible further development of our model. II Theoretical formulation II.1 Interaction picture for interfering fields The starting point for describing the interaction of the atom with light is to choose the energy eigenstates basis \ket{i} of n atomic states. Then the Hamiltonian in the Schrödinger picture H^{S} reads: \begin{split}\bra{i}H^{S}\ket{i}&=\hbar\omega_{Ai},\\ \bra{j}H^{S}\ket{i}&=\Omega_{ij}\exp({- i \omega_{Lij} t})+\Omega^{*}_{ij}\exp({ i \omega_{Lij} t}).\end{split} (1) Above \hbar\omega_{Ai} is the energy of the i -th state, \Omega_{ij}=\vec{d}_{ij}\cdot\vec{\mathcal{E}}_{ij}/\hbar is Rabi frequency for transitions i\rightarrow j with dipole moment \vec{d}_{ij}=-e\bra{j}\vec{r}\ket{i} , frequencies \omega_{Lij}>0 , and electric field vectors \vec{\mathcal{E}} giving complex amplitudes and polarizations. The total electric field