Time-Varying Directional State Transition Tensor for Orbit Uncertainty Propagation

Dong Qiao, Xiangyu Li · 2024

Read Time-Varying Directional State Transition Tensor for Orbit Uncertainty Propagation by Dong Qiao, Xiangyu Li (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-07060.txt.

Introduction

Xingyu Zhou and co-authors published an engineering paper in 2024 on tracking orbit uncertainty with a leaner tensor method. A directional version of the state transition tensor cuts cost by keeping only sensitive directions, but it freezes those directions in time and works only at one set epoch. The team proposes a time-varying version that updates the directions as it goes.

They derive how the directions change, then simplify the governing equations using their geometry. Cost analysis favors the new method over the full tensor. Tests on highly nonlinear three-body problems match the older methods' accuracy. The new method ran far faster than the full tensor and much faster than the frozen version for time histories.

Catalog record

CREATORDong Qiao, Xiangyu Li
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE90 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-07060

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Time-Varying Directional State Transition Tensor for Orbit Uncertainty Propagation Dong Qiao, Xiangyu Li Abstract The directional state transition tensor (DSTT) reduces the complexity of state transition tensor (STT) by aligning the STT terms in sensitive directions only, which provides comparable accuracy in orbital uncertainty propagation. The DSTT assumes the sensitive directions to be constant during the integration and only works at a predefined epoch. This paper proposes a time-varying STT (TDSTT) to improve the DSTT. The proposed TDSTT computes the sensitive directions with time; thereby, it can perform uncertainty propagation analysis at any point instead of only a predefined epoch as the DSTT does. First, the derivatives of the sensitive directions are derived. Then, the differential equations for the high-order TDSTTs are derived and simplified using the orthogonality of sensitive directions. Next, complexity analysis is implemented to show the advantages of the proposed TDSTT over the STT. Finally, the TDSTT is applied to solve orbital uncertainty propagation problems in highly nonlinear three-body systems. Numerical results show that the proposed TDSTT can yield nearly the same level of accuracy as the STT and DSTT. It is approximately 94% faster than the STT and has hundreds of improvements in speed over the DSTT when one wants to investigate the evolutions of orbital uncertainties. 1 Introduction O rbital uncertainty propagation is a key technique in astrodynamics [ 1 ] . Namely, it is used to predict the uncertainties in orbital states and is widely used in space tasks such as orbit determination [ 2 , 3 , 4 ] , orbital sensitivity analysis [ 5 , 6 ] , conjunction assessment and collision avoidance [ 7 , 8 , 9 ] , and orbital guidance and control [ 10 ] . In addition, using orbital uncertainty propagation techniques to implement robust trajectory optimization has become a tendency in recent mission design processes [ 11 , 12 , 13 ] . In theory, the exact solution for orbital uncertainty propagation can only be obtained by solving the Fokker-Planck equation (FPE) [ 1 ] . However, the FPE is a high-dimensional nonlinear partial differential equation (PDE). For a general orbital uncertainty propagation problem, the dimension is six, and a high-order dimension is required if additional parameters ( e.g. , maneuver parameters for maneuver reconstruction [ 3 , 14 , 15 , 16 , 17 ] , and spherical harmonic coefficients for gravitational field reconstruction [ 18 ] ) are considered. Thus, the PDE of the FPE is usually difficult to solve as it doesn’t have analytical solutions. Monte Carlo (MC) simulation is another way to solve the orbital uncertainty propagation problem. It involves repeatedly sampling random values for uncertain parameters (usually the initial orbital states) from their respective probability distributions and then propagating these values through the orbital dynamics model to obtain a distribution of potential orbital states [ 1 ] . By propagating a large number of orbital trajectories, the MC method provides a statistical representation of the orbital state distributions. Although accurate, the MC suffers from a high computational burden as it requires repeated propagation [ 19 ] . A variety of methods have been developed to approximate the solution to improve the computational efficiency of orbital uncertainty propagation, which can be broadly divided into two categories: linear and nonlinear methods [ 1 ] . Classic linear methods include the covariance analysis describing function technique (CADET) [ 20 ] and the state transformation matrix (STM) [ 21 , 22 ] . These linear methods suffer from drawbacks related to poor accuracy as they linearize the nonlinear dynamics. They may be capable of short-period uncertainty propagation in a dynamic environment whose nonlinearity is not that high; however, they are insufficient for operations in highly nonlinear dynamics such as the orbits in a multi-body system [ 23 ] ( e.g. , Earth-Moon, Sun-Earth, and Sun-Jupiter systems) or around an irregular asteroid [ 24 ] . To address the linearization deficiencies, high-order nonlinear methods have been developed, including unscented transformation (UT) [ 25 , 26 ] , conjugate UT (CUT) [ 27 , 28 , 29 ] , and high-order Taylor polynomials [ 23 , 30 ] . The UT and CUT belong to the sigma-point methods, which deterministically select the samples and propagate them to approximate the final distributions [ 25 , 27 ] . The UT and CUT require significantly fewer samples than the MC. High-order Taylor polynomial approximation of the solution of ordinary differential equations (ODEs) are mainly obtained via variational approach, producing the so-called state transition tensor (STT) [ 23 , 31 , 32 ] , or by implementing the algebra of Taylor polynomials, like in differential algebra (DA) [ 33 , 30 , 24 , 34 ] and jet transport (JT) [ 35 ] . The variational approach requires the computation of complex partial derivatives of the dynamics and the integration of a larger set of ODEs. DA and JT instead integrate the original set of ODEs but require custom integration schemes to handle the Taylor polynomials data type [ 36 , 35 ] . Compared with the sigma-point methods, the high-order Taylor polynomials have two significant advantages. Firstly, the high-order Taylor polynomials can be repeatedly employed when the initial state distributions change, while samples should be re-generated for UT and CUT. Secondly, the high-order Taylor polynomials can produce the statistical representation of the orbital state distribution (distribution-to-distribution) and predict the deviation states from a point-to-point way, which is extremely useful when applied to orbital guidance and control [ 37 , 10 ] . One of the drawbacks of the above high-order Taylor polynomial methods lies in that the number of terms increases exponentially as the order increases, leading to an exponential growth of the computational burden. Several efforts have been made to reduce computational costs. Roa and Park proposed a reduced STT (RSTT), which assumes that the two-body gravitational effects dominate the dynamics. The RSTT reduces the high-order terms of the STT by considering only the secular terms [ 38 ] . Zhou et al. employed an analytical STT to predict the state deviations under the two-body dynamics and trained a deep neural network (DNN) to compensate for the effects due to the perturbations. Its applications are limited as the DNN must be pre-trained [ 39 ] . A recent significant progress in this field is the directional STT (DSTT) proposed by Boone and McMahon [ 40 ] . The DSTT computes the sensitive direction of the maximum stretch of the Cauchy-Green tensor (CGT) at a predefined epoch and aligns the STT terms in the (sensitive) direction of the eigenvector associated with the largest eigenvalue of the CGT. In this way, the DSTT requires significantly fewer terms to predict the uncertainties. Boone and McMahon then applied the DSTT to estimate the orbit in the Earth-Moon three-body system [ 41 , 42 , 43 ] . Qiao et al. employed the DSTT to accelerate the configuration uncertainty propagation of a space-based gravitational-wave observatory [ 44 ] . In the above work ( i.e. , [ 40 , 41 , 42 , 43 , 44 ] ), the sensitive directions are fixed during the integration of the DSTT terms; thus, the DSTT

Read the complete text