An experiment to observe GNSS signals with the Australian VGOS array
Lucia McCallum, David Schunck, Jamie McCallum, Tiege McCarthy · 2024
Read An experiment to observe GNSS signals with the Australian VGOS array by Lucia McCallum, David Schunck, Jamie McCallum, Tiege McCarthy (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-07020.txt.
Introduction
Lucia McCallum and co-authors wrote a 2024 paper on a first in Earth measurement work. Radio telescopes in Australia, built to observe the stars, were used to observe navigation satellites in the sky. The two great Earth-measuring techniques, GNSS and VLBI, have long been kept apart. Their operating frequency bands seemed too far apart to share a target.
A new band on the telescopes, in the low L-band range, removed that barrier. Test observations showed the telescopes could track the navigation satellites in the geodetic VLBI style, right across the continent. That provides the first direct ties between the two reference frames in that part of the world. It also sets up test work for Genesis, a space-ties mission due to launch in 2028.
Catalog record
| CREATOR | Lucia McCallum, David Schunck, Jamie McCallum, Tiege McCarthy |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 28 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-07020
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
An experiment to observe GNSS signals with the Australian VGOS array Lucia McCallum, David Schunck, Jamie McCallum, Tiege McCarthy Abstract This paper introduces a new instrument enabling a novel combination of Earth measuring techniques: direct observations with the radio astronomical instruments to satellites of the global navigation satellite systems. Inter-technique biases are a major error source in the terrestrial reference frame. Combining two major space-geodetic techniques, GNSS and VLBI, through observations to identical sensors has been considered infeasible due to their seemingly incompatible operating frequencies. The newly accessible L-band capability of the Australian VGOS telescopes is shown here, invalidating this prevailing opinion. A series of test observations demonstrates geodetic VLBI observations to GPS satellites for a continental-wide IVS telescope array, with the potential for observations at a critical scale. We anticipate immediate impact for the geodetic community, through first-ever inter-technique ties between VLBI and GNSS in the Australian region and via the opportunity for critical test observations towards the Genesis mission, geodesy’s flagship project in the area of space ties set for launch in 2028. I Introduction Accurate timing, navigation and positioning information underpins modern society ( GGCE 2024 ) . It is provided through Global Navigation Satellite Systems (GNSS), such as the Global Positioning System (GPS). Satellite navigation itself relies on accurate orbit information. For this, one needs to disentangle the movement of the satellite in the Earth’s gravity field and the variable rotation of the Earth. Precise Earth orientation parameters are provided through the International Earth Rotation and Reference System Service (IERS), which combines measurements from the Global Geodetic Observing System (GGOS), such as those provided by GNSS or Very Long Baseline Interferometry (VLBI). In VLBI ( Nothnagel et al. 2017 ; Sovers et al. 1998 , i.e.) , a global network of radio telescopes receives signals emitted from extragalactic radio sources, allowing for precise measurement of the distance between the receiving stations (baselines) as well as the orientation of the Earth with respect to a celestial reference frame ( Charlot et al. 2020 , ICRF;) . UT1-UTC, the difference between the actual rotation of the Earth and universal time maintained by a set of atomic clocks, is the parameter that is uniquely measured by the VLBI technique. Geodesy is the science of measuring the geometric shape of the Earth, its orientation in space and its gravity field ( Poutanen & Rózsa 2020 ) . Its main product is the International Terrestrial Reference Frame ( Altamimi et al. 2023 , ITRF2020;) , the most accurate coordinate system of the Earth, underpinning all geosciences. The ITRF is a combined product of four different space-geodetic techniques, GNSS, VLBI, Satellite Laser Ranging (SLR) and Doppler Orbitography and Radiopositioning Integrated by Satellite (DORIS). Its accuracy (long-term origin) is estimated to be at the level of 5 mm ( Altamimi et al. 2023 ) , which is a factor of five worse than today’s needs ( Plag & Pearlman 2009 ) . The restricting factor for further improvements of the ITRF is thought to be systematic errors of the individual techniques. The linking of the various techniques is crucial, which is usually done via local tie survey at co-location observatories, hosting components of multiple techniques ( Matsumoto et al. 2022 , e.g.) . In ITRF2020, tie discrepancies of up to several centimetres are present, thus limiting the overall accuracy of the coordinate frame. This problem has long been recognised, searching for alternative methods to link the various techniques. SLR, GNSS and DORIS are all satellite techniques and people are working on combining them at the observation level ( Thaller et al. 2011 ; Flohrer et al. 2011 ; Männel & Rothacher 2017 ; Bury et al. 2021 , e.g.) . VLBI is different. Natural radio sources in use are extremely distant and emit over a wide range of frequencies, with signal strengths at a typical level of 1/1000 of the system noise. Geodetic VLBI was first used in the 1970s ( Hinteregger et al. 1972 ) . The frequencies in use developed from globally available instruments and they are recognised and partly protected by the international telecommunications union (ITU). Currently, geodetic VLBI is done at S (2.2-2.4 GHz) and X (8.2-8.9 GHz) bands ( Sovers et al. 1998 ; Schuh & Behrend 2012 ) with the new generation VLBI Global Observing System ( Niell et al. 2018 , VGOS;) making use of the wideband frequency range between 3 and 14 GHz. In contrast, GNSS systems typically operate at L-band (1.2 and 1.6 GHz), emitting artificial signals (narrow-band), many orders of magnitude stronger than natural radio sources. Thus, intrinsically, geodetic VLBI and GNSS have incompatible observing requirements. While there have been attempts in observing GNSS satellites with VLBI ( Tornatore et al. 2014 ; Haas et al. 2014 ; Haas et al. 2017 ; Plank et al. 2017 ) , such investigations were always understood as pathfinders. VLBI telescopes and equipment are not designed to track GNSS satellites or receive and process their signals. When successful ( Plank et al. 2017 , e.g.) , the used telescopes were not the core instruments used for the TRF observations and standard processing chains revealed insufficiencies in handling the powerful narrow-band signals inherent to GNSS. A thorough combination between VLBI and GNSS can only occur if the same equipment and processes are used (telescopes, correlation and analysis software) as is used by the standard geodetic VLBI chain coordinated by the International VLBI Service for Geodesy and Astrometry ( Nothnagel et al. 2017 , IVS;) . An exception to this statement are efforts at Wettzell, where indeed L-band signals could be received using the standard S-band receiver ( Haas et al. 2014 ) . A similar approach is followed for our work. Accepting the fact that VLBI and GNSS cannot simply be connected via direct observation of the L-band signal with the IVS network, alternative systems were suggested: Rothacher et al. 2009 defined the concept of a space tie, combining receivers/transmitters of all four techniques on a single satellite platform. There were mission proposals submitted to space agencies, such as GRASP ( Bar-Sever et al. 2009 ) and E-GRASP/Eratosthenes ( Biancale et al. 2017 ) before ESA selected the Genesis mission ( Delva et al. 2023 ) . It is also worth mentioning NASA’s GRITSS project, which aims to link the VLBI and GNSS systems by using a dedicated satellite in a heterodyning approach. The VLBI team of the University of Tasmania, for the first time, demonstrate that a geodetic VLBI array can observe the GNSS constellation in L-band and derive geodetic observations, in a (close to) production mode. Geodetic VLBI in Australia is operated by the University of Tasmania, contracted through Geoscience Australia. There are three VGOS telescopes on the continent, in Hobart (Tasmania), Katherine (Northern Territory), and Yarragadee (Western Australia), forming the AuScope VLBI array. In September/October 2024 we observed a set of GPS satellites over several hours, processed the observations through the standard VLBI processing chain deriving geodetic baseline delays. These successful observations are a surprise to the community, which has had the belief that modern VGOS systems are unable to receive GNSS signals. The consequences of this newly developed technique are twofold: A direct