Design Multiband Monopole and Microstrip Patch Antennas using High Frequency Structure Simulator
Georgios Giannakopoulos, Khushbu Mehboob Shaikh · 2024
Read Design Multiband Monopole and Microstrip Patch Antennas using High Frequency Structure Simulator by Georgios Giannakopoulos, Khushbu Mehboob Shaikh (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-06667.txt.
Introduction
Georgios Giannakopoulos and Khushbu Mehboob Shaikh design a compact antenna in 2024 for mobile phone bands. Their dual-band antenna must work on both the GSM and DCS bands while staying small enough for a handset. They built it as a flat patch on a common circuit board material, shaped so it can fold into a box form.
The team first simulated the design in a standard antenna tool, then built it and tested it on lab gear. The measured signal loss matched the simulation well across a wide range of frequencies. They also charted how the antenna radiates in each band. The paper closes with how the feed line match affects performance.
Catalog record
| CREATOR | Georgios Giannakopoulos, Khushbu Mehboob Shaikh |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 13 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-06667
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Design Multiband Monopole and Microstrip Patch Antennas using High Frequency Structure Simulator Georgios Giannakopoulos, Khushbu Mehboob Shaikh Abstract This paper describes the design, construction and testing of a dual-band monopole microstrip patch antenna to operate in the GSM and DCS bands. For compactness the monopole antenna is mounted on top of a FR4 substrate and is designed as a planar structure which can be wrapped into a box like structure. The performance characteristics of the wrapped dual band monopole antenna are simulated on Ansoft HFSS before fabrication and testing on a Network Analyzer. The simulated HFSS return loss of the antenna shows broad agreement with experiment over the frequency range from 500 MHz to 4 GHz 500\penalty\ \mathrm{MHz}\text{ to }4\penalty\ \mathrm{GHz} . Radiation patterns are generated in each band of operation of the antenna. The effect of feedline impedance matching on the performance of the monopole antenna is discussed. keywords Microstrip, Monopole, Wrapped structure, HFSS, GSM, DCS 1 Introduction This paper is concerned with the design, construction and testing of a dual-band monopole antenna which is required to operate in the Global System for Mobile communications (GSM 890-960\mathrm{MHz} ) and Digital Communication System (DCS 1710-1880\mathrm{MHz} ) bands. Monopole antennas have similar characteristics to a dipole antenna in which the monopole structure can be represented by one half of the dipole and the ground plane of the monopole can be represented by the remaining half of the dipole. The fundamental resonant frequency of a monopole is therefore related to a quarter wavelength of a patch length in the monopole structure. The principle involved in achieving a multiband antenna is for the structure of the monopole to be made up of multiple path lengths with each length being associated with a quarter wavelength of each resonant frequency. In practice, for compact monopole structures, the resonant frequencies do not occur exactly at a quarter wavelength of each path since coupling effects occur between the close multiple paths of the microstrip patches. For compactness and efficiency, mobile phone dual-band antennas are constructed from conductive patches being placed on a microstrip antenna. Microstrip antennas have received much attention over recent years due to their low cost, robustness, ease of construction and compact size. These antennas can be mounted on aircraft, spacecraft, satellites, cars and mobile telephones. Microstrip antennas received considerable attention in the 1970’s but was first patented in 1955 [ 1 ] . These antennas basically consist of a conductive strip (patch) and a conductive ground plane which is separated by a thin substrate of dielectric material. Popular feeding methods to the antenna are the microstrip line, coaxial probe, aperture coupling and proximity coupling. The patch of the antenna can take on a variety of different shapes. However the theory involved is complex and approximate theories have only been developed for simple shapes such as rectangular or circular patches. In this paper, use of the Ansoft High Frequency Structure Simulator (HFSS) [ 2 ] package has been used to determine the performance characteristics of a GSM/DCS dual-band monopole antenna. The return loss results are compared with experimental values obtained from a fabricated antenna connected to a network analyzer. 2 Dual Band Monopole Design A monopole antenna is an antenna which is similar to a dipole antenna but with one half of the dipole being replaced by a ground plane at right angles to the other half of the dipole. When the ground plane is large, a monopole antenna behaves like a dipole antenna. A vehicle radio aerial for example is a monopole antenna in which one half of the dipole antenna is the mast and the other half of the dipole antenna is the body of the vehicle. Mobile phones also use monopole antennas. In the past, mobile phones had a protruding aerial acting as one half of the dipole. The disadvantage of a protruding monopole was that the size of the phone was increased and also they were susceptible to breaking off. Modern mobile phones have a monopole antenna in which is enclosed within the body of the phone in the form of a compact wrapped structure. Mobile phones also are required to produce low radiation towards a user’s head. Such phones are said to produce a low specific absorption rate (SAR). Low profile monopole antennas which incorporate folded elements as a wrapped structure does block some of the radiation towards a user’s head. In recent years, mobile phones are required to receive multi-band signals is which the antenna must resonate at predetermined frequencies. For example a dual-band phone which receives GSM/DCS is required to have two separate resonant bandwidths in operating around 900\mathrm{MHz} and 1800\mathrm{MHz} frequencies. A triple band phone which receives GSM/DCS/PCS is required to have three separate resonant bandwidths operating at frequencies of 900\mathrm{MHz} , 1800\mathrm{MHz} and 1900\mathrm{MHz} [ 3 ] . In order for mobile phones to be compact in size, planar monopoles operating at these frequencies need be bent or folded into certain shape. For example a long quarter wave path can be compacted from a 2\mathrm{D} planar structure into a 3\mathrm{D} structure by spiralling the patch inwards or outwards. Antennas can also be wrapped into 3\mathrm{D} structures by bending the quarter wave paths into suitable shapes [ 4 ] , [ 5 ] , [ 6 ] . In this paper Ansoft HFSS is used to design a dual-band monopole antenna for GSM (890-960\mathrm{MHz}) and DCS (1710-1880\mathrm{MHz}) operation. The dual-band antenna discussed in this paper is shown in Figure 1 (a) and Figure 1 (b) . (a) (b) Figure 1 : Monopole antennas layout (a) unwrapped and (b) wrapped. Figure 1 (b) shows the wrapped version of the two dimensional form of the antenna shown in Figure 1 (a) . The wrapped structure in Figure 1 (b) is a compact structure which has overall dimensions of and is therefore a suitable design for mobile phone use. The monopole of the antenna is surrounded by air and is attached to a feedline which passes over an FR4-epoxy substrate which has a thickness of 1.6mm and a relative permittivity value of 4.7 . The feedline is extended by a distance of 4mm away from the end of the substrate so that coupling effects between the monopole and the ground plane below the substrate are reduced. 3 HFSS results The monopole structure in Figure 1 (b) has been simulated in Ansoft HFSS over a frequency range from 500\penalty\ \mathrm{MHz}\text{ to }4\penalty\ \mathrm{GHz} . The feedline is designed to have an impedance of 50\Omega which requires the thickness of the feedline strip to be 2.91mm . The length of the feedline used in the simulation was chosen to be 100mm in order to avoid any wave port radiation contaminating the results. The return loss for the wrapped structure shown in Figure 1 (b) is presented in Figure 2 , using both a standard feedline (unmatched impedance) and a feedline attached to a quarter wave transformer (matched impedance at a frequency of 980\mathrm{MHz} ). Figure 2 : Microstrip Antenna under test on a Network Analyzer. Figure 2 shows two resonant frequency bands which operate in the GSM band and the DCS band. The unmatched feedline return data show