Towards novel tunability schemes for hybrid ferromagnetic transmon qubits
Halima Giovanna Ahmad, Raffaella Ferraiuolo*, Giuseppe Serpico*, Roberta Satariano, Anna Levochkina, Antonio Vettoliere, Carmine Granata, Domenico Montemurro, Martina Esposito, Giovanni Ausanio, Loredana Parlato, Giovanni Piero Pepe, Alessandro Bruno, Francesco Tafuri, Davide Massarotti · 2024
Read Towards novel tunability schemes for hybrid ferromagnetic transmon qubits by Halima Giovanna Ahmad, Raffaella Ferraiuolo*, Giuseppe Serpico*, Roberta Satariano, Anna Levochkina, Antonio Vettoliere, Carmine Granata, Domenico Montemurro, Martina Esposito, Giovanni Ausanio, Loredana Parlato, Giovanni Piero Pepe, Alessandro Bruno, Francesco Tafuri, Davide Massarotti (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-06562.txt.
Introduction
A fifteen-author team works toward a qubit that tunes itself by magnetism instead of by extra wiring. Standard superconducting qubits shift their frequency through current lines, but those lines leak heat and noise, a bottleneck for scaling. The proposed ferrotransmon swaps in a special Josephson junction whose ferromagnetic layer remembers its state, so the frequency can be set magnetically while the junction keeps its quiet, low-loss character.
This paper covers the groundwork: the design of the hybrid device and simulations of it. Special focus goes to the on-chip lines that supply in-plane magnetic fields, the handle that steers the qubit. Early measurements of those lines are reported. The authors frame the device as a route to processors that shed the forest of tuning wires.
Catalog record
| CREATOR | Halima Giovanna Ahmad, Raffaella Ferraiuolo*, Giuseppe Serpico*, Roberta Satariano, Anna Levochkina, Antonio Vettoliere, Carmine Granata, Domenico Montemurro, Martina Esposito, Giovanni Ausanio, Loredana Parlato, Giovanni Piero Pepe, Alessandro Bruno, Francesco Tafuri, Davide Massarotti |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 23 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-06562
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Towards novel tunability schemes for hybrid ferromagnetic transmon qubits Halima Giovanna Ahmad, Raffaella Ferraiuolo*, Giuseppe Serpico*, Roberta Satariano, Anna Levochkina, Antonio Vettoliere, Carmine Granata, Domenico Montemurro, Martina Esposito, Giovanni Ausanio, Loredana Parlato, Giovanni Piero Pepe, Alessandro Bruno, Francesco Tafuri, Davide Massarotti Abstract Flux tuning of qubit frequencies in superconducting quantum processors is fundamental for implementing single and multi-qubit gates in quantum algorithms. Typical architectures involve the use of DC or fast RF lines. However, these lines introduce significant heat dissipation and undesirable decoherence mechanisms, leading to a severe bottleneck for scalability. Among different solutions to overcome this issue, we propose integrating tunnel Superconductor-Insulating-thin superconducting interlayer-Ferromagnet-Superconductor Josephson junctions (SIsFS JJs) into a novel transmon qubit design, the so-called ferrotransmon. SIsFS JJs provide memory properties due to the presence of ferromagnetic barriers and preserve at the same time the low-dissipative behavior of tunnel-insulating JJs, thus promoting an alternative tuning of the qubit frequency. In this work, we discuss the fundamental steps towards the implementation of this hybrid ferromagnetic transmon. We will give a special focus on the design, simulations, and preliminary experimental characterization of superconducting lines to provide in-plane magnetic fields, fundamental for an on-chip control of the qubit frequencies in the ferrotransmon. I Introduction The Josephson effect is the backbone of superconducting quantum technologies. The non-linear potential energy of Josephson junctions (JJs) allows for engineering on-chip macroscopic artificial atoms [ 1 ] with transition energies that can be defined by the materials and circuit design [ 2 , 3 , 4 , 5 , 6 , 7 , 8 ] . The capability to couple JJs with several circuital elements, such as transmission lines and superconducting resonators [ 2 , 4 , 9 , 10 , 7 , 11 , 12 , 13 , 14 , 15 ] , provides an easy interface with control and readout electronics, which is fundamental for basic quantum computing operations and for fulfilling the DiVincenzo’s criteria [ 16 ] . Most importantly, the noticeable advances in material science, nanofabrication techniques and circuit design have led to a large variety of superconducting qubits, each of them with different performances in terms of coherence and fidelities [ 17 ] . Therefore, the search for combinations of novel materials, circuital designs, and new protocols for encoding qubits has emerged as a very active field [ 4 , 12 , 13 , 10 , 18 , 19 , 7 , 14 , 11 , 15 , 9 , 8 ] . It is a common request in transmon devices to have an in-situ knob to tune the qubit frequency. This is usually achieved by integrating Josephson DC-SQUIDs [ 20 , 21 , 2 , 22 ] , where the Josephson energy can be tuned by threading an external magnetic field through the DC-SQUID loop. Such magnetic flux fields are typically generated on-chip by inductively coupling DC or fast RF transmission lines [ 2 , 22 ] . By sending DC or AC signals through flux lines, it is possible to: i) set the idle frequency of the qubits in superconducting quantum processing units for certain specific operations [ 23 , 24 ] ; ii) implement single-qubit Z quantum gates [ 7 ] and iii) set on resonance two or more coupled qubits to implement two-qubit entangling gates, like the iSWAP or the CZ [ 4 , 25 , 26 , 27 ] . Nevertheless, flux tunability poses important limitations in scalability and coherence [ 2 , 28 , 22 , 29 , 30 ] . Indeed, magnetic flux fluctuations are one of the primary noise sources in transmon qubits [ 2 , 31 ] , and solutions that reduce their contribution are required. To reach this goal, unconventional hybrid JJs have been proposed to achieve novel tunability schemes in superconducting qubits. Superconducting-semiconducting hybrid JJs, for example, have been integrated into transmon qubits to achieve qubit frequency tunability using gate voltages (gatemon), rather than magnetic flux fields [ 32 , 33 , 34 , 35 , 36 , 37 , 38 , 39 , 40 ] . Fig. 1: Simulation for normalized Fraunhofer patterns of a square SIsFS Josephson junction with side length a=300\;nm . The blue and black curves identify the Fraunhofer pattern corresponding to the virgin magnetization curve and the Fraunhofer pattern obtained by ramping the external magnetic field in the downward direction, as shown by the arrow. The critical current level separation at the zero-field working point is \sim 25\% . The simulation considers a saturation magnetization \mu_{0}M=0.9\;T . In Ref. [ 41 ] , we proposed to integrate hybrid tunnel ferromagnetic JJs in transmon devices (ferrotransmon) to provide a novel frequency tuning scheme that relies on the hysteretic magnetic behavior of the ferromagnetic barrier [ 42 , 43 , 44 ] : by applying an in-plane magnetic field, perpendicular to the Josephson current, a hysteretic Fraunhofer-like behavior of the critical current I_{c} is expected with a shift depending on the sweeping magnetic field direction. In Figure 1 , we report a simulation of the normalized Fraunhofer-like modulation for a tunnel ferromagnetic JJ with a lateral size in the submicrometer regime, compatible with transmon circuits [ 7 ] . Starting from the virgin magnetization curve, i. e., when the ferromagnetic barrier has not yet been magnetized, the magnetic field is swept towards positive values on the rise of the in-plane magnetic field pulse (in blue). In contrast, on the falling edge of the pulse (in black), the ferromagnetic barrier acquires a positive residual magnetization, thus effectively shifting the I_{c} Fraunhofer-like modulation to negative magnetic fields. Therefore, the JJ will show a different I_{c} value at zero-field, i. e., effectively switching off the external magnetic fields while performing quantum logic operations. A similar protocol has been earlier proposed for the implementation of cryogenic memories [ 45 , 42 , 44 , 46 , 47 , 48 ] , where a fundamental requirement was to achieve sufficiently high switching speed between the current level states. In this sense, tunnel ferromagnetic JJs have been demonstrated to achieve faster switching speed compared to standard metallic ferromagnetic JJs [ 45 , 42 , 44 , 46 , 47 , 48 ] : the fundamental timescale is given by the Josephson switching speed \tau\propto I_{c}R_{N} , where the normal resistance R_{N} of a tunnel JJ is orders of magnitudes larger than in metallic JJs [ 45 , 42 , 44 , 46 , 47 , 48 ] . Specifically for what concerns quantum technologies applications, tunnel-like behavior of the JJ is fundamental also to achieve an underdamped electrodynamics behavior, i. e., to guarantee a sufficiently low impact of quasiparticle dissipation [ 49 , 50 , 51 ] . In this manuscript, we first summarize the main requirements to build a proof-of-concept hardware for the ferrotransmon, discussed in detail in previous works [ 41 , 52 , 53 , 51 , 54 , 55 ] . In Sec. III , we will then focus on our proposals for on-chip fast in-plane magnetic field lines layout, a fundamental step towards the experimental validation of the ferrotransmon design. We will finally outline the conclusions and next steps to follow shortly. II Experimental requirements towards the ferrotransmon