Article Title

First Author, Second Author, Third Author · 2024

Read Article Title by First Author, Second Author, Third Author (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-06528.txt.

Introduction

Venu, writing alone in 2024, compares two ways to set an interval around an unknown value. In Bayesian work, the highest density interval is the shortest span that holds a set share of belief. It is praised for that short length, yet some fault it for how it behaves when values are rescaled.

The author shows that, under stated conditions, this interval matches a classic frequentist tool in a key way. Both shift in the same manner under one-way rescalings of the value. The proof rests on a version of the interval centred on the most likely value. The result gives Bayesian users a firmer ground for a tool they already favour.

Catalog record

CREATORFirst Author, Second Author, Third Author
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE17 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-06528

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Article Title First Author, Second Author, Third Author Abstract The abstract serves both as a general introduction to the topic and as a brief, non-technical summary of the main results and their implications. Authors are advised to check the author instructions for the journal they are submitting to for word limits and if structural elements like subheadings, citations, or equations are permitted. keywords keyword1, Keyword2, Keyword3, Keyword4 † † equal-contributors: These authors contributed equally to this work. † † equal-contributors: These authors contributed equally to this work. 1 Introduction The Introduction section, of referenced text Campbell and Gear 1995 expands on the background of the work (some overlap with the Abstract is acceptable). The introduction should not include subheadings. Springer Nature does not impose a strict layout as standard however authors are advised to check the individual requirements for the journal they are planning to submit to as there may be journal-level preferences. When preparing your text please also be aware that some stylistic choices are not supported in full text XML (publication version), including coloured font. These will not be replicated in the typeset article if it is accepted. 2 Results Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. 3 This is an example for first level head—section head 3.1 This is an example for second level head—subsection head 3.1.1 This is an example for third level head—subsubsection head Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. Sample body text. 4 Equations Equations in L a T e X can either be inline or on-a-line by itself (“display equations”). For inline equations use the $...$ commands. E.g.: The equation H\psi=E\psi is written via the command $H \psi = E \psi$ . For display equations (with auto generated equation numbers) one can use the equation or align environments: \|\tilde{X}(k)\|^{2}\leq\frac{\sum\limits_{i=1}^{p}\left\|\tilde{Y}_{i}(k)\right\|^{2}+\sum\limits_{j=1}^{q}\left\|\tilde{Z}_{j}(k)\right\|^{2}}{p+q}. (1) where, \displaystyle D_{\mu} \displaystyle=\partial_{\mu}-ig\frac{\lambda^{a}}{2}A^{a}_{\mu} \displaystyle F^{a}_{\mu\nu} \displaystyle=\partial_{\mu}A^{a}_{\nu}-\partial_{\nu}A^{a}_{\mu}+gf^{abc}A^{b}_{\mu}A^{a}_{\nu} (2) Notice the use of \nonumber in the align environment at the end of each line, except the last, so as not to produce equation numbers on lines where no equation numbers are required. The \label{} command should only be used at the last line of an align environment where \nonumber is not used. Y_{\infty}=\left(\frac{m}{\textrm{GeV}}\right)^{-3}\left[1+\frac{3\ln(m/\textrm{GeV})}{15}+\frac{\ln(c_{2}/5)}{15}\right] (3) The class file also supports the use of \mathbb{} , \mathscr{} and \mathcal{} commands. As such \mathbb{R} , \mathscr{R} and \mathcal{R} produces \mathbb{R} , \mathscr{R} and \mathcal{R} respectively (refer Subsubsection 3.1.1 ). 5 Tables Tables can be inserted via the normal table and tabular environment. To put footnotes inside tables you should use \footnotetext[]{...} tag. The footnote appears just below the table itself (refer Tables 1 and 2 ). For the corresponding footnotemark use \footnotemark[...] Table 1: Caption text 0 0 footnotetext: Source: This is an example of table footnote. This is an example of table footnote. Column 1 Column 2 Column 3 Column 4 row 1 data 1 data 2 data 3 row 2 data 4 data 5 1 1 1 Example for a first table footnote. This is an example of table footnote. data 6 row 3 data 7 data 8 data 9 2 2 2 Example for a second table footnote. This is an example of table footnote. The input format for the above table is as follows: \begin{table}[<placement-specifier>] \caption{<table-caption>}\label{<table-label>}% \begin{tabular}{@{}llll@{}} \toprule Column 1 & Column 2 & Column 3 & Column 4\\ \midrule row 1 & data 1 & data 2Ψ & data 3 \\ row 2 & data 4 & data 5\footnotemark[1] & data 6 \\ row 3 & data 7 & data 8Ψ & data 9\footnotemark[2]\\ \botrule \end{tabular} \footnotetext{Source: This is an example of table footnote. This is an example of table footnote.} \footnotetext[1]{Example for a first table footnote. This is an example of table footnote.} \footnotetext[2]{Example for a second table footnote. This is an example of table footnote.} \end{table} Table 2: Example of a lengthy table which is set to full textwidth 0 0 footnotetext: Note: This is an example of table footnote. This is an example of table footnote this is an example of table footnote this is an example of table footnote this is an example of table footnote. Element 1 1 1 1 Example for a first table footnote. Element 2 2 2 2 Example for a second table footnote. Project Energy \sigma_{calc} \sigma_{expt} Energy \sigma_{calc} \sigma_{expt} Element 3 990 A 1168 1547\pm 12 780 A 1166 1239\pm 100 Element 4 500 A 961 922\pm 10 900 A 1268 1092\pm 40 In case of double column layout, tables which do not fit in single column width should be set to full text width. For this, you need to use \begin{table*} ... \end{table*} instead of \begin{table} ... \end{table} environment. Lengthy tables which do not fit in textwidth should be set as rotated table. For this, you need to use \begin{sidewaystable} ... \end{sidewaystable} instead of \begin{table*} ... \end{table*} environment. This environment puts tables rotated to single column width. For tables rotated to double column width, use \begin{sidewaystable*} ... \end{sidewaystable*} . Table 3: Tables which are too long to fit, should be written using the “sidewaystable” environment as shown here 0 0 footnotetext: Note: This is an example of table footnote this is an example of table footnote this is an example of table footnote this is an example of table footnote this is an example of table footnote. Element 1 1 1 1 This is an example of table footnote. Element 2 2 footnotemark: 2 Projectile Energy \sigma_{calc} \sigma_{expt} Energy \sigma_{calc} \sigma_{expt} Element 3 990 A 1168 1547\pm 12 780 A 1166 1239\pm 100 Element 4 500 A 961 922\pm 10 900 A 1268 1092\pm 40 Element 5 990 A 1168 1547\pm 12 780 A 1166 1239\pm 100 Element 6 500 A 961 922\pm 10 900 A 1268 1092\pm 40 6 Figures As per the L a T e X standards you need to use eps images for L a T e X compilation and pdf/jpg/png images for PDFLaTeX compilation. This is one of the major difference between L a T e X and PDFLaTeX . Each image should be from a single input .eps/vector image file. Avoid using subfigures. The command for inserting images for L a T e X and PDFLaTeX can be generalized. The package used to insert images in LaTeX/PDFLaTeX is the graphicx package. Figures can be inserted via the normal figure environment as shown in the below example: \begin{figure}[<placement-specifier>] \centering \includegraphics{<eps-file>} \caption{<figure-caption>}\label{<figure-label>} \end{figure} Figure 1: This is a widefig. This is an example of long caption this is an example of long caption this is an example of long caption this is an example of long caption In case of double column layout, the above format puts figure captions/images to single column width. To get spanned images, we need to provide \begin{figure*} ... \end{figure*} . For sample purpose, we have included the width of images in the optional argument of \includegraphics tag. Please ignore this. 7 Algorithms, Program codes and Listings Packages algorithm , algorithmicx and algpseudocode are used for setting algorithms in L a T e X using the format: \begin{algorithm} \caption{<alg-caption>}\label{<alg-label>} \begin{algorithmic}[1] .

Read the complete text