Analysis of an Inelastic Contact Problem for the Damped Wave Equation

Boris Muha, Srđan Trifunović · 2024

Read Analysis of an Inelastic Contact Problem for the Damped Wave Equation by Boris Muha, Srđan Trifunović (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-06185.txt.

Introduction

Boris Muha and Srđan Trifunović analyze a vibrating string that can strike a rigid obstacle below it, in this 2024 mathematics paper. The string is viscoelastic, so it loses energy as it moves, and the contact is inelastic: hitting the floor costs motion rather than bouncing it back.

The authors build a solution that lasts for all time by first solving a softened problem, where a penalty force pushes the string back whenever it dips below the obstacle. Energy loss, they show, happens only during contact, on a vanishing slice of time, and only while the string moves downward. After contact the velocity dies away in a precise weak sense. The model is offered as a clean test bed for harder contact problems where fluids meet structures.

Catalog record

CREATORBoris Muha, Srđan Trifunović
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE73 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-06185

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Analysis of an Inelastic Contact Problem for the Damped Wave Equation Boris Muha, Srđan Trifunović Abstract In this paper, we examine the dynamic behavior of a viscoelastic string oscillating above a rigid obstacle in a one-dimensional setting, accounting for inelastic contact between the string and the obstacle. We construct a global-in-time weak solution to this problem by using an approximation method that incorporates a penalizing repulsive force of the form 1 ε χ { η < 0 } ( ∂ t η ) − \frac{1}{\varepsilon}\chi_{\{\eta<0\}}(\partial_{t}\eta)^{-} . The weak solution exhibits well-controlled energy dissipation, which occurs exclusively during contact and is concentrated on a set of zero measure, specifically when the string moves downward. Furthermore, the velocity is shown to vanish after contact in a specific weak sense. This model serves as a simplified framework for studying contact problems in fluid-structure interaction contexts. Keywords and phrases: contact mechanics, viscoelastic string, velocity penalization AMS Mathematical Subject classification (2020): 74M15 (Primary), 74K05, 35L05 (Secondary) 1 Introduction 1.1 Problem description We study the following obstacle problem for a one-dimensional viscoelastic string, which deforms only in the vertical direction. Let l>0 denote the length of the string. The vertical displacement of the string is denoted by \eta:(0,\infty)\times(0,l)\to\mathbb{R} . The string is always positioned above or in contact with the obstacle plane {y=0} , satisfying the non-penetration condition: \displaystyle\eta\geq 0,\quad\text{on }(0,\infty)\times(0,l). (1.1) The motion of the string is governed by the damped wave equation with an unknown contact reaction force F_{\text{con}} : \displaystyle\partial_{tt}\eta-\partial_{txx}\eta-\partial_{xx}\eta \displaystyle=F_{con},\quad\text{on }(0,\infty)\times(0,l). (1.2) The string is fixed at both endpoints, with boundary conditions: \displaystyle\eta(t,0)=\eta(t,l)=h, (1.3) where h>0 is a given constant. The problem also satisfies the energy balance: \displaystyle\frac{d}{dt}\left(\frac{1}{2}\int_{0}^{l}|\partial_{t}\eta(t)|^{2}dx+\frac{1}{2}\int_{0}^{l}|\partial_{x}\eta(t)|^{2}dx\right)+\int_{0}^{l}|\partial_{tx}\eta(t)|^{2}dx+\int_{0}^{l}D_{con}(t)dx=0, (1.4) where D_{\text{con}} represents the energy dissipation due to contact. Finally, the problem is supplemented with the following additional assumptions: (A1) F_{con},D_{con}\geq 0 ; (A2) \text{supp}(D_{con})\subseteq\text{supp}(F_{con})\subseteq\partial\{\eta=0\} ; (A3) \text{supp}(F_{con})\cap\text{int}\{\partial_{t}\eta\geq 0\}=\emptyset ; (A4) \lim\limits_{t\to t_{0}^{+}}\partial_{t}\eta(t,x_{0})=0 for all (t_{0},x_{0})\in\partial\{\eta=0\} . Condition (A1) implies that the contact force F_{\text{con}} always acts to push the string away from the obstacle {y=0} and that the dissipation D_{\text{con}} is naturally always non-negative. The second inclusion in the condition (A2) is a version of the well-known Signorini condition (see e.g. [ 10 ] ), which asserts that the reactive force is active only when the string is in contact with the obstacle (i.e., on \{\eta=0\} ). Furthermore, it follows immediately from equation ( 1.2 ) that F_{\text{con}}=0 in the interior of {\eta=0} , as all terms on the left-hand side of ( 1.2 ) vanish. The first inclusion for \text{supp}(D_{\text{con}}) indicates that the dissipation due to contact can only happen where the force F_{\text{con}} is active. Condition (A3) states that if the string is not moving downward, no contact force is present. Mechanically, this condition follows from the fact that F_{\text{con}} is a reactive force. Lastly, condition (A4) ensures that the string does not bounce off the obstacle. This condition is motivated by the interpretation of the model as a simplified representation of contact in fluid-structure interactions. In such interactions, an elastic body immersed in a fluid often exhibits zero velocity after contact with a rigid surface. Since, by (A2), the contact force F_{\text{con}} is supported on \partial\{\eta=0\} , which is a nowhere dense set, we expect F_{\text{con}} to be a singular measure. Consequently, we adopt a weak solution framework. Furthermore, the contact set can be highly irregular and complex, and in the general case, conditions (A3) and (A4) cannot be directly formulated or proven. For example, at the level of weak solutions, condition (A4) is in general not well defined via standard trace theory. However, under certain mild assumptions about the regularity of the contact set, we can formulate and prove both conditions (A3) and (A4). 1.2 Literature review The contact problem is a decades old topic that has been studied by engineers, physicists, mathematicians and many others. From a mathematical perspective, such problems present numerous challenges. One major difficulty arises from the rapid transition between contact and no-contact regimes, resulting in an abrupt switch between governing equations. This sudden change induces a reactive contact force, typically represented as a singular force—a measure that enforces the impermeability condition. Additionally, the contact surface is not known in advance, making the problem a free-boundary problem with an unknown and generally irregular boundary. This irregularity stems from the singular nature of the contact force, which often results in weak solutions. Comparing two solutions becomes particularly problematic, as their contact sets and corresponding contact forces may differ, complicating the analysis of uniqueness. Lastly, tracking the velocity at the moment of contact poses significant challenges, especially on irregular contact sets where defining such quantities precisely is nontrivial. Let us give a brief overview of some closely related topics. The contact problem for the wave equation has been studied intensively around four decades ago. This work relies on purely hyperbolic theory in 1D and explicit calculation of contact surface and solutions. In the celebrated work by Schatzmann [ 23 ] , she proves the existence of a unique global weak solution to the wave obstacle problem and gives an explicit integral formula for the solution. In a recent result, this solution has been studied by Fernández-Real and Figalli in [ 14 ] where the authors show that a certain Lipschitz norm is preserved through collision. We also mention a similar contact problem with the gluing effect was studied in [ 9 ] . The contact problem for a thermoelastic von Kármán plate has been studied in [ 2 ] , see also [ 10 ] for more details on the dynamic plate contact problems. The stationary contact problem (known as the obstacle problem) has been a well-covered topic based on the elliptic theory and calculus of variations, which, besides well-posedness theory, has given a very valuable insight into the regularity of the contact set boundary, see [ 5 , 15 , 21 ] and the references therein. Finally, let us point out a recent progress for the contact problem in for second-gradient materials. The static case was studied in [ 20 ] , which was later extended to the quasistatic case with second-grade viscoelasticity in [ 19 ] , and finally the fully inertial case was studied in [ 7 ] where a weak solution was constructed by a two-time scale approach developed in [ 1 ] . This work is primarily motivated by the contact problem in fluid-structure interaction (FSI) problems, which involve the interplay between a fluid and a solid structure that interact dynamically through a shared interface. The presence of fluid adds significant complexity to contact problems, whereas irregularities in the shape of the fluid cavity, cavity degeneration, and rapid change in velocity upon contact all create challenges for mathematical analysis, as standard tools often fail under such conditions. Additionally, the low regularity of the fluid makes it difficult to track velocity and stress at the interface during and after contact, further complicating the enforcement of physical conditions in these regions. Notable examples of such FSIs are the production of sound in the trachea, caused by the vibration of vocal cords when they come into contact (e.g. [ 13 ] ) and closing of the heart valves (e.g. [ 3 ] ). Although

Read the complete text