Enhancing 5G-NR mmWave : Phase Noise Models Evaluation with MMSE for CPE Compensation

Desire Guel, Flavien Herve Somda, Boureima Zerbo, Oumarou Sie · 2024

Read Enhancing 5G-NR mmWave : Phase Noise Models Evaluation with MMSE for CPE Compensation by Desire Guel, Flavien Herve Somda, Boureima Zerbo, Oumarou Sie (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-05841.txt.

Introduction

Desire Guel and co-authors fight phase noise in 5G millimeter-wave links in a 2024 paper. At such high frequencies, oscillator wobble smears the shared phase of the signal, a fault called common phase error. The team evaluates noise models and applies a minimum mean square error method to estimate and cancel that error.

Simulations show error size dropping from seven point four to four point six percent for one modulation scheme. Bit errors fell far more sharply, from about five in a thousand to five in a hundred thousand. Results held across signal strengths and antenna setups. Readers get a tested fix for cleaner millimeter-wave links.

Catalog record

CREATORDesire Guel, Flavien Herve Somda, Boureima Zerbo, Oumarou Sie
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE37 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-05841

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Enhancing 5G-NR mmWave : Phase Noise Models Evaluation with MMSE for CPE Compensation Desire Guel, Flavien Herve Somda, Boureima Zerbo, Oumarou Sie Abstract ABSTRACT - The rapid development of 5G New Radio (NR) and millimeter-wave (mmWave) communication systems highlights the critical importance of maintaining accurate phase synchronization to ensure reliable and efficient communication. This study focuses on evaluating phase noise models and implementing Minimum Mean Square Error (MMSE) algorithms for Common Phase Error (CPE) compensation. Through extensive simulations, we demonstrate that CPE compensation significantly enhances signal quality by reducing Error Vector Magnitude (EVM) and Bit Error Rate (BER) across various Signal-to-Noise Ratio (SNR) levels and antenna configurations. Results indicate that implementing MMSE-based CPE estimation and compensation in 5G-NR mmWave systems reduced EVM from 7.4% to 4.6% for 64QAM and from 5.4% to 4.3% for 256QAM, while also decreasing BER from 5.5\times 10^{-3} to 5.2\times 10^{-5} for 64QAM, demonstrating significant improvements in signal quality and reliability across various SNR levels and antenna configurations. Our findings provide valuable insights for optimizing phase noise mitigation strategies in 5G-NR mmWave systems, contributing to the development of more robust and efficient next-generation wireless networks. Keywords: 5G New Radio (NR), mmWave, CPE Compensation, Phase Noise Models, Minimum Mean Square Error (MMSE), EVM (Error Vector Magnitude), BLER (BLock Error Rate), SNR (Signal-to-Noise Ratio), NR-PDSCH (Physical Downlink Shared Channel), PT-RS (Phase Tracking Reference Signals). Date of Submission: 27-08-2024 Date of acceptance: 05-09-2024 1 INTRODUCTION Phase synchronization is a critical component in the performance of 5G New Radio (NR) Millimeter-wave (mmWave) communication systems. Accurate phase synchronization is essential for maintaining the reliability and efficiency of communication, particularly within the mmWave frequency bands, which typically range from 24 GHz to 100 GHz. These high-frequency bands enable unprecedented data rates and bandwidth which are vital for meeting the increasing demand for high-speed wireless connectivity. The evolution of 5G-NR relies heavily on mmWave technology to provide enhanced mobile broadband services, ultra-reliable low-latency communication and massive machine-type communication, addressing the capacity constraints of traditional frequency bands [ 1 , 2 , 3 ] . However, the deployment of 5G-NR mmWave networks is accompanied by significant challenges, particularly in the accurate estimation and compensation of phase errors. These errors arise from various sources, including oscillator imperfections, channel effects and hardware impairments, all of which can induce Common Phase Error (CPE). CPE estimation and compensation are crucial for ensuring reliable communication in mmWave systems, as even minor phase deviations can significantly degrade system performance, leading to increased error rates and reduced signal quality [ 4 ] . Despite ongoing research, there remains a gap in the comprehensive evaluation of phase noise models and their effectiveness in improving CPE compensation, particularly using advanced algorithms like Minimum Mean Square Error (MMSE). While previous studies have explored various phase noise models and compensation techniques, the growing complexity and stringent performance requirements of 5G-NR mmWave systems necessitate a more thorough evaluation of these models. Specifically, there is a need to assess the effectiveness of phase noise models when combined with MMSE algorithms, a challenge that has not been fully addressed in the current literature. This study seeks to fill this gap by providing a comprehensive evaluation of phase noise models and applying MMSE algorithms for CPE estimation and compensation in 5G-NR mmWave systems. In contrast to earlier works, this research introduces a novel evaluation framework specifically designed to address the unique challenges of the mmWave spectrum. Through this framework, we conduct an in-depth analysis of commonly used phase noise models and compare the performance of MMSE algorithm in mitigating phase errors. The findings of this study are expected to contribute valuable insights into the practical optimization of phase noise models and compensation techniques, ultimately enhancing the reliability and efficiency of 5G-NR mmWave communication systems. The remainder of this article is structured as follows: In Section 2 , we conduct a detailed literature review to position our work within the broader context of existing research. Section 3 describes the system model used in our evaluation, detailing the performance assessment of various phase noise models and the implementation of state-of-the-art algorithms for CPE estimation and compensation. Section 4 outlines the experimental setup and methodologies employed in this study. Finally, Section 5 presents the results, followed by a comprehensive discussion of the findings, highlighting the strengths and limitations of the evaluated models and algorithms and providing insights for future research directions. 2 LITERATURE REVIEW In this section, we review the existing research on phase noise models, Minimum Mean Square Error (MMSE) algorithms and Common Phase Error (CPE) compensation techniques in millimeter-wave (mmWave) communication systems. The review focuses on the strengths and limitations of these studies, highlighting the need for a comprehensive evaluation framework that addresses the challenges posed by 5G NR mmWave environments. Table 1 provides a comprehensive taxonomy of the related works, summarizing key contributions, strengths and limitations of existing studies on phase noise models, MMSE algorithms and CPE compensation techniques in mmWave communication systems. Table 1: Taxonomy of Related Works Authors Short Description Strengths Limitations Reference Dikarev et al. (2022) Phase noise compensation algorithm robust to timing errors. Practical phase noise mitigation using PT-RS. Specific to DFT-s-OFDM waveform. [ 2 ] Park et al. (2023) CPE estimation using MMSE equalizer. Insights into CPE estimation techniques. Focus on only MMSE algorithm [ 5 ] Azzahhafi et al. (2024) 4x4 MIMO optical architecture for mmWave indoor applications. High-capacity, reliable communication using RoF technology. Limited to indoor 60 GHz unlicensed bands. [ 6 ] Qi et al. (2018) PT-RS design for phase noise tracking in 5G NR. Foundational insights into PT-RS design. Does not address MMSE algorithm. [ 7 ] Samsung (2016) Phase noise modeling in mmWave communication systems. Realistic oscillator phase noise modeling. No direct focus on compensation algorithms. [ 8 ] Gu et al. (2019) CPE and ICI estimation in OFDM systems. Accurate CPE and ICI cancellation methods. Focus on adjacent sub-carrier interference. [ 9 ] Kim et al. (2021) ML-based phase noise compensation in mmWave systems. Enhances system robustness using ML techniques. High computational complexity. [ 10 ] Zhang et al. (2022) Phase noise modeling for 5G mmWave. Detailed modeling for high-frequency bands. Does not focus on compensation techniques. [ 11 ] Dikarev et al. [ 2 ] address the performance degradation caused by phase noise in mmWave systems and propose a novel phase noise compensation algorithm and phase tracking reference signal (PT-RS) structure designed to be robust against timing errors. Their work underscores the critical role of PT-RS in mitigating the impact of phase noise, providing practical solutions for enhancing 5G NR uplink transmission performance. However, the proposed algorithm and PT-RS structure are tailored specifically to discrete-Fourier-transform spread orthogonal frequency division multiplexing (DFT-s-OFDM) waveforms, limiting the generalizability of their findings to other modulation schemes or communication scenarios. This specificity highlights the need for broader evaluations across different modulation techniques to enhance the applicability of phase noise compensation strategies. Park et al. [ 5 ] introduce a scheme for CPE estimation using MMSE equalizers, emphasizing the importance of accurate CPE estimation for effective channel equalization. Although their study provides valuable insights into CPE estimation techniques, it primarily focuses on MMSE equalization rather than the broader evaluation of phase noise models.

Read the complete text