Equation of state of a small system with surface degrees of freedom
2024
Read Equation of state of a small system with surface degrees of freedom (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-05056.txt.
Introduction
Naplekov and Yanovsky, named in the head byline though the catalog creator field is blank, study a small system of particles with extra freedom at its surface. They work out the full spread of outcomes for the model from scratch, without first using heat or the usual laws of gases.
From the spread of where a surface part sits, they find the push the inner particles exert. That gives a state rule that links push to the counts of bulk and surface parts, their mean energies, and the size of the box. In the large size limit, the rule turns into the known ideal gas rule.
Catalog record
| YEAR | 2024 |
|---|---|
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 43 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-05056
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Equation of state of a small system with surface degrees of freedom Abstract We have considered a model of a small finite system with internal particles and surface degrees of freedom. All the main statistical distributions were explicitly obtained, on a pre thermodynamic limit basis. The concept of temperature or any thermodynamic equations were not used. The distribution of coordinates of a surface element allows the rigorous determination of the pressure exerted by the internal particles. In this way, we have derived the equation of state for a small system with surface. It relates the pressure to the numbers of bulk and surface degrees of freedom, their mean energies and the volume. The mean potential energy of the surface was found to be higher than the mean kinetic energy, per degree of freedom. The obtained equation of state accounts for the influence of this excessive surface energy. In the thermodynamic limit, the temperature appears and the obtained equation of state transfers to the usual ideal gas one. 1 Institute for Single Crystals, NAS Ukraine, 60 Nauky Ave., Kharkov, 61001, Ukraine 2 V. N. Karazin Kharkiv National University, 4 Svobody Sq., Kharkov, 61022, Ukraine 1 Introduction The study of small systems, whose typical sizes span from nanometers to submicron units, is a challenging frontier of modern physics. Such small-scale systems escape the concepts of classical thermodynamics [ 1 , 2 , 3 ] that were originally developed for macroscopic systems. Classical thermodynamics deals with infinitely large systems, a condition known as the thermodynamic limit. It allows to disregard the effects associated with the surface, a finiteness of the number of degrees of freedom, fluctuations, etc. While for macroscopic systems these factors are vanishingly small, the thermodynamic limit is a good approximation. However, it is clear that as the size of the system decreases, there will be a point where this approach loses its applicability. Typical for small systems is a substantial contribution of the surface energy, which is not proportional to the system’s volume. Consequently, small systems are not extensive. Some properties of small systems are intimately related to their energy spectrum, which becomes discrete due to their finite size. The statistical properties of the phonon gas within nano-sized particles exhibit significant size dependence. The impact of fluctuations also cannot be neglected, if the number of degrees of freedom is small or the timescale is short enough. All these subjects require the development of new theoretical frameworks, relevant to the systems far from the thermodynamic limit. Beyond the general theoretical interest, this field gains attention due to the recent experimental progress in direct manipulations and measurements of various small systems. It can be nanoparticles, thin layers, viskers or even single molecules. Many thermal, optical and other properties of these systems are found to be significantly different from those of macrosystems (see for example [ 4 ] ). The single-molecule biological machines [ 5 , 6 ] , for example, operate at energy levels of the order of thermal energy. Their operating principles are currently not fully understood. The theory level on such subjects lags significantly behind the progress made in experimental research. Even the very origin of the surface energy on an atomistic level is still far from clear [ 7 ] . Current theoretical approaches to nanoscale systems [ 8 , 9 , 10 , 11 , 12 ] are mostly based on the thermodynamics of macro systems, with some modifications. Other way is molecular kinetic, based on the principles of statistical mechanics. It is possible to find the exact statistical distributions for a finite system, almost without assumptions and without thermodynamic limit passage. Such distributions will depend only on mechanical quantities. This approach is implemented in this paper for the statistical description of a simple model finite system with surface degrees of freedom. First we consider the most simple case of the surface with one degree of freedom, to give the detailed explanation of our approach and obtained results. Then we extend it to the surface consisting of multiple elements. 2 General statistical approach Figure 1: A finite number N of colliding particles in the rectangular container of length L and height H . One side of the container consists of S mobile elements ( S=1 and S=3 are shown). All the mobile elements are of mass M and holden by springs of stiffness k . Between collisions with particles they oscillate with a frequency w=\sqrt{\frac{k}{M}} and some current amplitude A_{i}(t)\leq A . We will consider a two-dimensional motion of a finite number N of colliding particles in a finite-sized rectangular container. The particles will be of a round shape, with radii r_{i} and masses m_{i} . Their motion between collisions will be uniform and rectilinear, all collisions absolutely elastic. The container will be of length L and height H . One of its walls will consist of S equivalent movable parts of mass M , holden by springs of stiffness k . The general view of this system is shown in Fig. 1 . Between collisions with particles, each mobile part oscillates freely with a frequency w=\sqrt{\frac{k}{M}} . After each collision, the energy, amplitude and phase of the oscillation change. Since the total system energy remains finite and equal to a constant value E_{tot} , the coordinates X_{i} of the mobile elements always stay within the range |X_{i}|\leq A=\sqrt{\frac{2E_{tot}}{k}} . The complete system’s phase space will be the 4N+2S -dimensional space of variables (P_{1},..,P_{S} , p_{x1},..,p_{xN} , p_{y1},..,p_{yN} , X_{1},..,X_{S} , x_{1},..,x_{N} , y_{1},..,y_{N}) , where (p_{xi},p_{yi}) , (x_{i},y_{i}) , P_{i} , X_{i} are the momenta and coordinates of the i th particle and surface part respectively. The current state of the system is represented by some point in this phase space. Since the total energy of the system is conserved, the representing point during evolution is always located on the surface of constant energy E=E_{tot} . As is known, the density of filling of this surface with trajectory is uniform for a gas of identical particles. For a gas of particles of different masses, the filling density is also uniform with respect to the special measure, which is called gradient or ergodic. According to this measure, hypervolume of an elementary hypersurface part is determined as d\Omega=\frac{d\Sigma}{|grad~E|} , where d\Sigma is the hypervolume of this elementary part according to the usual Euclidean measure. The derivation of the gradient measure from Liouville’s theorem, as well as the derivation of this theorem from the Hamiltons equations of motion, can be found, for example, in [ 13 ] . Thus, the density of filling of the surface of constant energy is: \rho=\frac{\mathit{const}}{|grad~E|} (1) This is a probability density per unit hypervolume of a curvilinear 4N+2S-1 -dimensional hypersurface. We will write the equation of this surface as: P_{1}=\pm\sqrt{M}\sqrt{2E_{tot}-\underset{i=1}{\stackrel{{\scriptstyle N}}{{\sum}}}\frac{(p_{xi}^{2}+p_{yi}^{2})}{m_{i}}-kX_{1}^{2}-\underset{j=2}{\stackrel{{\scriptstyle S}}{{\sum}}}(\frac{P^{2}_{j}}{M}+kX_{j}^{2})} (2) Figure 2: The elementary volume d\Sigma=|\mathbf{V}|dP_{2}..dy_{N} , spanned over a set of vectors \mathbf{v_{i}} , and its projection dP_{2}..dy_{N} onto the space of independent phase variables. Thus, we choose P_{1} as a dependent variable, which is determined (up to the sign) by all the other independent phase variables. Further, we are going to find the relationship between the elementary volume d\Sigma of the energy hypersurface and the volume of its projection