Effect of top metallic contacts on energy conversion performances for near-field thermophotovoltaics

Youssef Jeyar, Kevin Austry, Minggang Luo, Brahim Guizal, Yi Zheng, Riccardo Messina, Rodolphe Vaillon, Mauro Antezza · 2024

Read Effect of top metallic contacts on energy conversion performances for near-field thermophotovoltaics by Youssef Jeyar, Kevin Austry, Minggang Luo, Brahim Guizal, Yi Zheng, Riccardo Messina, Rodolphe Vaillon, Mauro Antezza (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-04258.txt.

Introduction

Thermophotovoltaic cells turn heat glow into power, and the metal grid on the cell's front face can quietly eat into the yield. Jeyar and co-authors model that grid honestly, as a metal grating inside a full three-part theory, instead of the usual shortcut that just blanks out the covered area. Their method reads the light power the semiconductor actually absorbs, which lets them define the cell's efficiency more soundly.

In the near field, the grid's effect on absorbed power, and thus on electrical output, is large, and its behavior departs strongly from the shortcut's predictions. The authors argue contact design deserves full modeling in these devices.

Catalog record

CREATORYoussef Jeyar, Kevin Austry, Minggang Luo, Brahim Guizal, Yi Zheng, Riccardo Messina, Rodolphe Vaillon, Mauro Antezza
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE26 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-04258

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Effect of top metallic contacts on energy conversion performances for near-field thermophotovoltaics Youssef Jeyar, Kevin Austry, Minggang Luo, Brahim Guizal, Yi Zheng, Riccardo Messina, Rodolphe Vaillon, Mauro Antezza Abstract The design of metallic contact grids on the front side of thermophotovoltaic cells is critical since it can cause significant optical and electrical resistive losses, particularly in the near field. However, from the theoretical point of view, this effect has been either discarded or studied by means of extremely simplified models like the shadowing methods, that consist in simply ignoring the fraction of the semiconductor surface covered by metal. Our study, based on a rigorous three-body theoretical framework and implemented using the scattering matrix approach with the Fourier modal method augmented with adaptive spatial resolution, provides deeper insight into the influence of the front metal contact grid. This approach allows direct access to the radiative power absorbed by the semiconductor, enabling the proposal of an alternative definition for the thermophotovoltaic cell efficiency. By modeling this grid as a metallic grating, we demonstrate its significant impact on the net radiative power absorbed by the cell and, consequently, on the generated electrical power. Our analysis reveals behaviors differing substantially from those predicted by previous simplistic approaches. Preprint: APS/123-QED I Introduction Radiative heat transfer is the exchange of energy mediated by the electromagnetic field occurring between two bodies at different temperatures and separated by a vacuum gap. Stefan-Boltzmann’s law sets an upper limit to this energy flux, achieved only in the ideal scenario of two blackbodies. The advent of fluctuational electrodynamics, dating back to the 1970s and originating from the pioneering works of Rytov [ 1 ] , Polder and van Hove [ 2 ] , showed that this limit does not apply when the distance separating the two bodies is small compared to the thermal wavelength, which is of the order of a few microns at ambient temperature. In this near-field regime, the flux can overcome, by orders of magnitude, the far-field limit (see e.g. Ref. [ 3 ] ). This has triggered the idea of exploiting this flux amplification and has been recently investigated for various geometrical configurations, such as nanostructures involving gratings [ 4 , 5 , 6 ] , for various applications, such as heat-assisted data recording and storage [ 7 ] , infrared sensing and spectroscopy [ 8 , 9 ] , and energy-conversion systems [ 10 , 11 , 12 , 13 ] such as thermophotovoltaic (TPV) devices. The idea of utilizing near-field radiation in TPV systems was introduced in [ 14 ] and [ 15 ] . Since then, significant progress has been made in both its theoretical understanding and experimental demonstration [ 16 , 17 ] . Figure 1: Sketch of the geometrical configuration, involving three bodies [InAs semiconductor layers (1), gold grating (2) and p-doped Si emitter (3)] and their characteristic length scales. In this article, we focus on two main performance metrics: the electrical power generated by the cell, p_{\rm{out}} , and the pairwise efficiency, \eta_{\rm{pairwise}}={p_{\rm{out}}}/{p_{\rm{rad}}} , where p_{\rm{rad}} is the net radiative heat flux absorbed by the cell [ 18 ] . The efficiency of TPV devices operating in the far field has continuously increased, reaching slightly above 40% with a tandem cell [ 19 ] , and almost 44% with a single-junction cell [ 20 ] . Despite significant advances achieved through several recent experimental demonstrations [ 21 , 22 , 23 , 24 ] , the efficiency of TPV devices operating in the near field is currently still below 15%. Among the reasons for this, Joule losses play a critical role [ 25 ] . The increase in the net radiation flux absorbed by the cell, due to evanescent modes, leads to an increase in the electric current and consequently to unwanted resistive losses at the level of the contacts. In conventional cells, contacts typically include a metallic grid and fingers at the front. In near-field TPV devices, this structure raises issues because the dimensions of the contacts are similar to or even larger than the vacuum gap distance needed to observe substantial near-field enhancements. Additionally, the impact of these front contacts on radiative exchange between the emitter and the cell is usually completely ignored, or at most accounted for by considering the shadowing approximation (i.e., considering the absorption of the semiconductor by its area not covered by metal as in [ 25 , 26 ] ). Using a rigorous approach, the scattering matrix approach (S-matrix) calculated via the Fourier modal method equipped with adaptive spatial resolution (FMM-ASR) [ 27 , 28 , 29 ] , we investigate the real impact of the front metal contact grid on radiative exchange and on conversion performance. By modeling this grid as a metallic grating, we demonstrate its significant effect on the net radiative power absorbed by the active part of the cell. Remarkably, our quantitative and qualitative analyses reveal behaviors substantially different from those predicted by previous simplistic approaches, pointing out the overall inadequacy of the shadowing approximation and the necessity of an accurate theoretical analiys. The paper is structured as follows: In Section II , we describe the physical system. In Section III , we introduce our model which is based on a Landauer-like formalism. Finally, in Section IV , we present and discuss the numerical results. II Physical system The physical system, shown in Fig. 1 , consists of three bodies. Body 1 is a p-on-n single-junction TPV cell made of InAs with a bandgap of 0.354 eV ( \omega_{g}=5.38\times 10^{14} rad/s), maintained at a temperature of T_{\rm cell}=300 K. The p-doped and n-doped layers of the junction are 400\, nm and 2.6\,\mu m thick, respectively. Body 2 is a gold one-dimensional lamellar grating positioned on top of the cell, characterized by a period D=1\,\mu m, a filling fraction f (i.e., the ratio of the filled to empty part of the grating), and a height h . It is maintained at the same temperature ( T_{\rm cell}=T_{\rm grating}=300 K). Both structures are invariant along the y -axis. Body 3, the emitter, consists of p-doped silicon kept at T_{\rm em}=800 K. It is assumed to be a half-space and is separated from the grating by a fixed distance d=d_{\rm fixed}=100 nm along the z -axis. The choice of the emitter and cell materials was made to optimize radiative exchange, as the refractive index of p-doped Si closely matches that of p-doped InAs in the relevant spectral range [ 25 ] . In our study, we vary the height h and the filling fraction of the grating to observe the impact of these parameters on the radiative exchange and the conversion performance of the device. The dielectric permittivity of gold is calculated using the Drude model \epsilon(\omega)=1-\omega_{p}^{2}/(\omega^{2}+i\gamma\omega) with parameters \omega_{p}=137.1\times 10^{14} rad/s and \gamma=0.405\times 10^{14} rad/s. The optical properties of p-doped and n-doped InAs layers, as well as p-doped silicon, are modeled using parameters and methods from [ 25 , 30 , 31 ] . The InAs layers emit photons not as blackbodies but as luminescent bodies due to the chemical potential \mu\approx e\times V , where V is the voltage of the semiconductor set at V=0.9\dfrac{\hbar\omega_{g}}{e}\times\quantity(1 - \dfrac{T_\text{cell}}{T_\text{em}})\approx 200 mV (as in

Read the complete text