Ferroelectric domain walls for environmental sensors
L. Richarz, I. C. Skogvoll, E. Y. Tokle, K. A. Hunnestad, U. Ludacka, J. He, E. Bourret, Z. Yan, A.T.J. van Helvoort, J. Schultheiß, S. M. Selbach, D. Meier · 2024
Read Ferroelectric domain walls for environmental sensors by L. Richarz, I. C. Skogvoll, E. Y. Tokle, K. A. Hunnestad, U. Ludacka, J. He, E. Bourret, Z. Yan, A.T.J. van Helvoort, J. Schultheiß, S. M. Selbach, D. Meier (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-03691.txt.
Introduction
Richarz and co-authors show in a 2024 paper that thin walls inside a crystal can act as air sensors. Ferroelectric crystals split into regions, and the borders between regions carry odd electric traits at tiny scales. Teams have used those borders to mimic memory and diode parts. Here the borders serve as detectors.
Exposing the crystal to gases that add or remove oxygen flipped the walls between blocking and carrying current. Computer models tie the flip to oxygen atoms gathering at the walls and changing the charge flow. The current then acts as a signal of the air around the crystal. The concept adds sensing to the growing list of uses for domain walls.
Catalog record
| CREATOR | L. Richarz, I. C. Skogvoll, E. Y. Tokle, K. A. Hunnestad, U. Ludacka, J. He, E. Bourret, Z. Yan, A.T.J. van Helvoort, J. Schultheiß, S. M. Selbach, D. Meier |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 32 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-03691
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Ferroelectric domain walls for environmental sensors Preprint: AIP/123-QED L. Richarz, I. C. Skogvoll, E. Y. Tokle, K. A. Hunnestad, U. Ludacka, J. He, E. Bourret, Z. Yan, A.T.J. van Helvoort, J. Schultheiß, S. M. Selbach, D. Meier Abstract Domain walls in ferroelectric oxides provide fertile ground for the development of next-generation nanotechnology. Examples include domain-wall-based memory, memristors, and diodes, where the unusual electronic properties and the quasi-2D nature of the walls are leveraged to emulate the behavior of electronic components at ultra-small length scales. Here, we demonstrate atmosphere-related reversible changes in the electronic conduction at neutral ferroelectric domain walls in Er(Mn,Ti)O 3 . By exposing the system to reducing and oxidizing conditions, we drive the domain walls from insulating to conducting, and vice versa, translating the environmental changes into current signals. Density functional theory calculations show that the effect is predominately caused by charge carrier density modulations, which arise as oxygen interstitials accumulate at the domain walls. The work introduces an innovative concept for domain-wall-based environmental sensors, giving an additional dimension to the field of domain wall nanoelectronics and sensor technology in general. I Introduction Environmental sensors play a key role in modern electronics and the Internet of Things, having profound implications for various fields, ranging from home electronics and autonomous transport to safeguarding the ecosystem. The sensor’s task is to provide information about parameters, such as temperature, pressure, humidity, concentration of gases, and soil moisture, converting respective changes into electronic signals. One example is semiconductor-based gas sensors, which rely on conductivity variations that arise when a semiconducting oxide (e.g., \text{SnO}{\vphantom{\text{X}}}_{\smash[t]{\text{2}}} or ZnO ) is exposed to a certain target gas. Nikolic et al. 2020 Other concepts include polymers, nanotubes, and 2D materials for sensing applications. Dai et al. 2020 ; Schedin et al. 2007 Although such technologies are well-established and versatile environmental sensors are commercially available, several challenges remain. Traditional semiconductor sensors work best at relatively high operating temperatures and their recovery time after the detection of an event is relatively long. Liu et al. 2012 In addition, there is a pressing demand for miniaturization, enabling a higher packing density, the development of multi-functional environmental sensors, as well as concepts for spatially resolved sensing at the local scale. In this context, domain walls in ferroelectric oxides are particularly promising as a novel type of ultra-small sensing system. The domain walls represent natural interfaces with thicknesses approaching the unit cell level, and they are known to strongly interact with oxide defects Schultheiß et al. 2020 ; Schaab et al. 2018 ; Farokhipoor and Noheda 2011 ; Farokhipoor and Noheda 2012 ; Seidel et al. 2010 ; Guyonnet et al. 2011 ; Rojac et al. 2017 , which can be leveraged in sensing applications. Depending on the structure and charge state of a domain wall, it can either attract or repel oxygen defects and, thereby, amplify oxidation- and oxidation-reduction reactions Becher et al. 2015 ; Schaab et al. 2018 ; Skjærvø et al. 2018 ; Schultheiß et al. 2020 ; Campanini et al. 2020 . For example, it has been shown that oxygen vacancies have a tendency to accumulate at domain walls in BiFeO 3 Campanini et al. 2020 ; Rojac et al. 2017 ; Bencan et al. 2020 and LiNbO 3 Eggestad et al. 2024 and co-determine the local electronic response. In addition, domain walls can facilitate large ionic mobilities Salje 2000 , further enhancing the reactivity and potentially reducing the recovery time after exposure to, e.g., oxygen-rich or -poor atmospheres. Most importantly for sensing applications, the direct relation between the concentration of oxygen defects at the domain walls and their electronic transport behavior allows to readily translate environmentally driven variations in oxygen concentration into measurable changes in the local conductivity. In spite of these promising physical and chemical properties, the application potential of ferroelectric domain walls in sensor technology remains largely unexplored. Up to now, most studies focused on domain wall nanoelectronics, where the walls are utilized to emulate the behavior of classical electronic components at ultra-small length scales Seidel et al. 2009 ; Mundy et al. 2017 ; Schaab et al. 2018 ; Sharma et al. 2017 ; McConville et al. 2020 , and the implementation of domain walls in neuromorphic and other unconventional computing schemes. Everschor-Sitte et al. 2024 Readers interested in a more comprehensive coverage are referred to recent reviews Nataf et al. 2020 ; Meier and Selbach 2022 ; Sharma et al. 2022 . In contrast, much less is known about domain-wall-based sensing. In a recent study, the enhanced conductance at domain walls in a \text{LiNbO}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} thin film was utilized to enhance the film’s response to changes in temperature Geng et al. 2021 . Similarly, the defect concentration at the domain walls in \text{LiNbO}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} was shown to slow down electron-hole recombination, which is of interest for light sensing and in-memory computing. Zhang et al. 2024 Here, we investigate the relation between reducing/oxidizing environmental conditions and the electronic transport properties at ferroelectric domain walls in Er(Mn,Ti)O 3 . We show that reversible changes in conductance occur at neutral domain walls when exposed to reducing and oxidizing atmospheres, changing the domain walls from insulating to conducting and vice versa. Our density functional theory (DFT) calculations reveal that oxygen-defect-driven variations in the local carrier concentration, rather than band-gap-related effects, drive this change in transport behavior, providing a microscopic understanding. The results demonstrate the general possibility of leveraging ferroelectric domain walls as active units for sensing applications, translating environmental parameters into measurable electronic signals. II Exposure to reducing atmosphere For our study, we use the ferroelectric semiconductor Er(Mn,Ti)O 3 with 0.2% Ti doping (see Methods Section for more information on the crystal). For this material, the basic domain wall physics are well-understood Choi et al. 2010 ; Meier et al. 2012 ; Schultheiß et al. 2020 ; Wu et al. 2012 ; Småbråten et al. 2018 ; Schoenherr et al. 2019 ; Turner et al. 2018 ; Du et al. 2011 ; McCartan et al. 2024 ; Holtz et al. 2017 , and it is predicted that the system has a propensity to accumulate oxygen defects (i.e., interstitials) at its neutral domain walls Schaab et al. 2018 ; Schultheiß et al. 2020 . In general, the system displays an outstanding chemical flexibility and tunable semiconducting transport properties (p-type Holstad et al. 2018 ), that can be controlled via the oxygen content, i.e., the oxygen off-stoichiometry in Er ( Mn , Ti ) O 3+δ , with typical values \delta>0 in the as-grown state. Remsen and Dabrowski 2011 ; Danmo et al. 2024 ; Świerczek et al. 2017 ; Remsen and Dabrowski 2011 ; Skjærvø et al. 2016 This chemical flexibility, in combination with the affinity to accumulate oxygen defects at the neutral domain walls, makes it an ideal model system for domain-wall-based environmental sensing. \text{ErMnO}{\vphantom{\text{X}}}_{\smash[t]{\text{3}}} is one of the hexagonal manganites ( R MnO 3 with R = Sc, Y, In, Dy to Lu), in which the spontaneous polarization appears as a secondary effect, caused by a structural instability of the paraelectric high-temperature phase ( T_{C}\approx 1170 K Chae et al. 2012 ) that leads to a tripling of the unit cell and the formation of a polar axis