Design and Control of an Ultra-Slender Push-Pull Multisection Continuum Manipulator for In-Situ Inspection of Aeroengine

Weiheng Zhong, Yuancan Huang, Senior Member, IEEE, Da Hong, Nianfeng Shao · 2024

Read Design and Control of an Ultra-Slender Push-Pull Multisection Continuum Manipulator for In-Situ Inspection of Aeroengine by Weiheng Zhong, Yuancan Huang, Senior Member, IEEE, Da Hong, Nianfeng Shao (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-03508.txt.

Introduction

Weiheng Zhong and co-authors describe a thin robotic arm from 2024 built to inspect jet engines from the inside without taking them apart. Standard scopes bend only when they touch parts, so some blade rows stay out of reach. Crews then face costly teardown work or need several people to steer one scope.

The new arm has many linked sections that are pushed and pulled by tendons, giving it a long, slim shape that fits tight spaces. A control method sorts out how the tendons affect each other, so one operator can steer it in real time. Tests with a built prototype showed the arm could snake through staged blades. The authors see it as a possible swap for standard scopes.

Catalog record

CREATORWeiheng Zhong, Yuancan Huang, Senior Member, IEEE, Da Hong, Nianfeng Shao
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE32 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2412-03508

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Design and Control of an Ultra-Slender Push-Pull Multisection Continuum Manipulator for In-Situ Inspection of Aeroengine Weiheng Zhong, Yuancan Huang, Senior Member, IEEE, Da Hong, Nianfeng Shao Abstract Since the shape of industrial endoscopes is passively altered according to the contact around it, manual inspection approaches of aeroengines through the inspection ports have unreachable areas, and it’s difficult to traverse multistage blades and inspect them simultaneously, which requires engine disassembly or the cooperation of multiple operators, resulting in efficiency decline and increased costs. To this end, this paper proposes a novel continuum manipulator with push-pull multisection structure which provides a potential solution for the disadvantages mentioned above due to its higher flexibility, passability, and controllability in confined spaces. The ultra-slender design combined with a tendon-driven mechanism makes the manipulator acquire enough workspace and more flexible postures while maintaining a light weight. Considering the coupling between the tendons in multisection, a innovative kinematics decoupling control method is implemented, which can realize real-time control in the case of limited computational resources. A prototype is built to validate the capabilities of mechatronic design and the performance of the control algorithm. The experimental results demonstrate the advantages of our continuum manipulator in the in-situ inspection of aeroengines’ multistage blades, which has the potential to be a replacement solution for industrial endoscopes. Fig. 1: Conceptual illustration of the PPCM. I INTRODUCTION Industrial endoscope-assisted manual in-situ inspection of the areoengine through the inspection ports reserved in its casing is the mainstream approach at present. However, traversing the multistage blades with the endoscope proves challenging due to its passive alteration in shape upon contact with surroundings, which necessitates engine disassembly and the collaborative effort of inspectors to maneuver the detection head into invisible areas for comprehensive blade inspection, resulting in efficiency decline and increased costs. Fig. 2: a) Turbine inspection scenario; b) Compressor inspection scenario. Due to the mature and extensive application of continuum manipulators in medicine, researchers are increasingly interested in their potential capabilities for industrial inspection [ 1 ] . Several teams have previously explored or implemented research focusing primarily on mechanism design (including kinematics) [ 2 , 3 , 4 , 5 ] , control methods [ 6 ] , and the development of various working tools [ 7 , 5 ] or inspection sensors [ 8 ] for continuum manipulators. The research in this paper centers around mechanical design and control implementation. Based on a comparative analysis of existing achievements in practical applications, we have identified several key areas that require further improvement. The ultra-slender structure developed in [ 3 ] successfully overcomes the working range limitations of continuum manipulators, allowing for application in a turbine inspection scenario. However, the lack of push-pull functionality restricts its ability to traverse narrow gaps, and thus failing to meet the challenge of inspecting multiple stages of blades through a single inspection port in a compressor scenario. While [ 4 ] and [ 8 ] have basically achieved the traversal of multi-stage blades, their proposed mechanical designs lack consideration for constraints such as inspection port limitations, blade stagger angle, and spacing between blades, making them unsuitable for more challenging real-world scenarios. To address the aforementioned shortcomings, we developed an ultra-slender push-pull multisection continuum manipulator (PPCM) with a length-to-diameter ratio of up to 62.5 (56.3 as reported in [ 3 ] ), as illustrated in Fig. 1 , which, to our knowledge, represents the most slender design for continuum robots in aeroengine inspection. The PPCM facilitates multistage blade inspection through more intuitive teleoperation and has been validated for its versatility in various aeroengine inspection scenarios using a small simulation platform built from real data, which presents greater challenges compared to larger aeroengines. In summary, our contributions are as follows: • An ultra-slender continuum manipulator with push-pull multisection structure is developed. • A kinematic decoupling real-time control method for tendon-driven mechanism is implemented. • The advantages and adaptability of our continuum manipulator in various in-situ inspection scenarios are validated in a simulation platform for a certain type of aeroengine. Fig. 3: Schematic of the continuum manipulator: It is assembled by three single sections, of which three backbones form a concentric tube structure, and tendons between the three sections are coupled to each other. II MECHANICAL DESIGN II-A Requirements Identification Specific inspection scenarios of the aeroengine include compressors with multiple stages of blades and high- and low-pressure turbines. The inspection port of the turbine is situated at a distance from the turbine, as shown in Fig. 2 (a), and there are no contact points within the space for the endoscope to properly align, resulting in sagging under gravity. The inspection port of the compressor is located in the middle of the two-stage blades, as shown in Fig. 2 (b). The confined space between the two-stage blades, along with the large blade stagger angle, poses challenges for the endoscope to reach deeper locations. The difficulties presented by the aforementioned two inspection scenarios are to be addressed in the design of the PPCM, and several constraints must be taken into consideration [ 2 ] . The various diameters and orientations (horizontal or obliquely upward) of the inspection ports determine the maximum diameter of the PPCM and the adjustability of the position and orientation of the detection probe. The working length range of the PPCM is crucial for allowing it to maneuver freely in confined spaces as well as traverse large distances in open areas. It is necessary to consider the maximum length and curvature of each section of the PPCM to improve its adaptability to varying blade spacing and stagger angles during the traversal of multiple stages of blades. Moreover, the appropriate minimum payload capacity of the PPCM is essential to ensuring the successful integration of the inspection sensor. II-B Structure Analysis Fig. 4: Schematic of the backbone actuation: It features a pneumatic system comprising three fixed pneumatic grippers and one movable gripper. The extrinsic actuation mechanism of the PPCM is fundamental to its application in aeroengine inspection scenarios, where the motion of the continuum manipulator is converted into motion at the drive station through mechanical components. Placing the drive station far from the continuum manipulator makes it possible to miniaturize the manipulator to fit tight spaces. In addition, considering that the continuum manipulator needs to better handle motion within irregular spaces, a three-section design is not only necessary but also reasonable. Although the dexterity of the continuum manipulator is directly related to the number of sections, this requires being balanced with the challenges associated with achieving more precise control. The tendon-driven mechanism represents the optimal method for achieving a highly slender configuration in continuum manipulators, thereby reducing the manipulator’s diameter to accommodate additional inspection ports of varying diameters and blades with different gaps. As illustrated in Fig. 3 , each section consists of a flexible tube with several guide disks with evenly spaced holes as the backbone. The guide disk located at the end of the backbone is fixed to provide leverage for tendons to alter the shape of the backbone (see Structure A), while the other guide disks slide along the axial direction of the backbone. The spacing between the guide disks is maintained by springs, alternating between left- and right-handed

Read the complete text