Electrode and electroactive polymer layout design using topology optimization
Daniel Hård, Mathias Wallin, Matti Ristinmaa · 2024
Read Electrode and electroactive polymer layout design using topology optimization by Daniel Hård, Mathias Wallin, Matti Ristinmaa (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-03256.txt.
Introduction
Daniel Hård, Mathias Wallin, and Matti Ristinmaa let an optimizer draw both wires and active plastic in bendy electric structures, in a paper from two thousand twenty-four. The plastics deform when charged, but layouts were fixed by hand before. A density method now places both materials at once.
Curve-based mixing gives wide control over how materials blend in the math. The air field around the part is handled by a cut extended domain. Sample designs grow wires that run unbroken from source to both faces of the plastic. That path piles the field where it drives the bend. Readers in soft machines get layout as an output, not a guess.
Catalog record
| CREATOR | Daniel Hård, Mathias Wallin, Matti Ristinmaa |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-03256
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Electrode and electroactive polymer layout design using topology optimization Daniel Hård, Mathias Wallin, Matti Ristinmaa Abstract When electrically stimulated, electroactive polymers (EAPs) respond with mechanical deformation. The goal of this work is to design electrode and EAP layouts simultaneously in structures by using density-based, multi-material topology optimization. In this novel approach the layout of electrodes and EAP material are not given a priori but is a result from the topology optimization. Material interpolation based on exponential functions is introduced, allowing a large flexibility to control the material interpolation. The electric field in the surrounding free space is modeled using a truncated extended domain method. Numerical examples that demonstrates the method’s ability to design arbitrary EAP and electrode layouts are presented. In these optimized structures, electrode material is continuously connected from the electrical sources to opposite sides of the EAP material and thereby concentrating the electric field to the EAP material which drives the deformation. Keywords : Multi-material, Topology optimization, Electroactive polymer, Electrode, Free space 1 Introduction Electro-mechanically coupled materials deform when electrically stimulated. One example is piezoelectric materials where electric field and deformation are linearly coupled. Another example is electroactive polymers (EAPs) which has a non-linear coupling. Dielectric EAPs, which is the subject of this study, is an active research area which has great potential in, e.g., artificial muscles and actuators [ 1 , 2 ] . Typically, dielectric EAPs are constructed as thin layer of EAP material sandwiched between two compliant electrodes such that a potential difference will cause the EAP to contract in the direction of the electric field. Modeling and design of EAPs has attracted much attention, see, e.g., [ 3 ] , [ 4 , 5 , 6 ] , [ 7 ] . In recent years, there has been a growing interest into combining EAPs and topology optimization. [ 8 ] used topology optimization with a genetic algorithm to design dielectric elastomer structures with tunable band gaps. This problem was later solved more efficiently using gradient-based optimization by [ 9 ] . [ 10 ] used topology optimization to optimize the active EAP layer. This was developed into a multi-resolution model by [ 11 ] . In [ 12 ] the electrode placement was optimized, however they only considered the electrodes as a 2D-layer of nodes, not as a separate material. Recently, electrode connectivity was investigated by [ 13 ] , where the shape of the electrodes were implicitly given by the solid material phase. The goal in this work is to develop a topology optimization methodology capable of generating arbitrary EAP and electrode layouts. With this approach, the layout of electrode and EAP material is not given a priori but is an outcome of the topology optimization. This requires the use of multi-material topology optimization. Multi-material topology optimization can be used to find the optimal distribution of multiple different material phases. The commonly used SIMP method, see [ 14 ] , can be extended to handle multiple materials. Alternative methods include, e.g., Discrete Material Optimization (DMO) by [ 15 ] and Unified Material Interpolation (UMI) by [ 16 ] . In the context of multi-material optimization of coupled problems, [ 17 ] considered transient thermo-mechanical problems and [ 18 ] considered piezoelectric structures for energy harvesting. [ 19 ] investigated multi-material and multi-scale topology optimization of structures with embedded piezoelectric actuators. [ 20 ] proposed a method for simultaneous optimization of dielectric and conductive materials together with a geometry projection method for embedded piezoelectric stack actuators. [ 21 ] investigated multi-material shape morphing of layered EAPs, but did not optimize the electrodes explicitly. In most research on EAPs, only solid bodies were modeled. This is a reasonable approach for materials with large permittivity, e.g., piezoelectric materials. In the present case of dielectric EAPs, the permittivity is significantly smaller and approximately of the same or one order larger than vacuum. This will have substantial influence on the modeling of the EAP. Multiple approaches to model the electric fields in the surrounding free space for electrostatic conditions exist, see, e.g., [ 22 ] . [ 23 , 24 ] used a coupled BEM-FEM method to model the electric field in the space surrounding an EAP. [ 25 ] used a truncated free space in the study of a mixed variational formulation for quasi-incompressible electroactive and magnetoactive polymers. [ 26 ] incorporated a truncated free space in the context of topology optimization and this methodology is adapted in the current work. The structure of this paper is as follows. In Section 2 the EAP model is described. In Section 3 , the topology optimization formulation is developed. Numerical examples that demonstrates the method’s ability to generate arbitrary EAP and electrode layouts are shown in Section 4 . Lastly, Section 5 provides conclusions. 2 Non-linear electro-elasticity with free space In this section, the governing non-linear electro-elastic balance laws restricted to electrostatic condition will be introduced. For a detailed presentation of the topic, the reader is referred to [ 27 ] , [ 28 ] , [ 29 ] , and [ 3 ] . Modeling the surrounding free space is especially important for the electric field, since it is not restricted to the solid body. This work models the free space as a truncated extended domain presented in [ 26 ] , where the free space is modeled as a very soft elastic material with vacuum permittivity properties. Figure 1 : A solid body \mathcal{B}_{0} surrounded by a free space \mathcal{F}_{0} in the material and spatial configurations. Fig. 1 illustrates the considered domain in both the material and spatial configurations. The domain consists in the material configuration of a body \mathcal{B}_{0} and the surrounding free space \mathcal{F}_{0} such that the undeformed domain is given by \mathcal{B}_{0}\cup\mathcal{F}_{0} and \mathcal{B}_{0}\cap\mathcal{F}_{0}=\varnothing . When deformed, \mathcal{B}_{0} and \mathcal{F}_{0} are mapped to \mathcal{B}_{t} and \mathcal{F}_{t} , respectively. Particles are labeled by their coordinates {\bf\it X}\in\mathcal{B}_{0}\cup\mathcal{F}_{0} and their placement {\bf\it x}\in\mathcal{B}_{t}\cup\mathcal{F}_{t} is described by the smooth mapping {\bf\it x}({\bf\it X})={\bf\it\varphi}({\bf\it X}) . The deformation is locally described by the deformation gradient {\bf\it F}=\nabla_{{\bf\it X}}{\bf\it\varphi} and the local volume change J=\det(\vb*{F}) . The hyper-elastic material response will be governed by the right Cauchy-Green tensor defined as {\bf\it C}={\bf\it F}^{T}\cdot{\bf\it F} and its isochoric part \overline{{\bf\it C}}=J^{-2/3}{\bf\it C} . 2.1 Balance relations Assuming quasi-electrostatics, the Maxwell-Faraday equation becomes \nabla_{{\bf\it X}}\crossproduct{\bf\it E}={\bf\it 0} , implying that the electric field {\bf\it E} is obtained from the gradient of a continuous scalar electric potential \phi as {\bf\it E}=-\nabla_{{\bf\it X}}\phi , where the negative sign is introduced by convention. Gauss’s law, assuming no free volume charge density in the dielectric material, is formulated as \displaystyle\nabla_{{\bf\it X}}\cdot{\bf\it D} \displaystyle=0\mathchar 59\relax \displaystyle\text{in }\mathcal{F}_{0}\cup\mathcal{B}_{0}\mathchar 59\relax (1a) \displaystyle\phi \displaystyle=\phi_{g}\mathchar 59\relax \displaystyle\text{on }\partial\mathcal{B}_{0}^{g\mathord{\mathchar 59\relax}\phi}\mathchar 59\relax (1b) \displaystyle{\bf\it D}\cdot{\bf\it N} \displaystyle=0\mathchar 59\relax \displaystyle\text{on }\partial\mathcal{F}_{0}^{\infty}\mathchar 59\relax (1c) \displaystyle-\llbracket{\bf\it D}\rrbracket\cdot{\bf\it N} \displaystyle=D_{N}\mathord{\mathchar 59\relax} \displaystyle\text{on }\partial\mathcal{B}_{0}^{h\mathord{\mathchar 59\relax}\phi}\mathchar 59\relax (1d) where {\bf\it D} is the electric displacement. The boundary \partial\mathcal{B}_{0} to \mathcal{B}_{0} is split such that \partial\mathcal{B}_{0}=\partial\mathcal{B}_{0}^{h\mathord{\mathchar 59\relax}\phi}\cup\partial\mathcal{B}_{0}^{g\mathord{\mathchar 59\relax}\phi} and \partial\mathcal{B}_{0}^{h\mathord{\mathchar 59\relax}\phi}\cap\partial\mathcal{B}_{0}^{g\mathord{\mathchar 59\relax}\phi}=\varnothing . The boundary condition ( 1b ) represents the prescribed electric potential on the boundary part \partial\mathcal{B}_{0}^{g\mathord{\mathchar 59\relax}\phi} , and the boundary condition ( 1d ) represents the prescribed free surface charge density on the boundary part