Magnonic Fabry-Pérot resonators as programmable phase shifters
Anton Lutsenko, Kevin G. Fripp, Lukáš Flajšman, Andrey V. Shytov, Volodymyr V. Kruglyak, Sebastiaan van Dijken · 2024
Read Magnonic Fabry-Pérot resonators as programmable phase shifters by Anton Lutsenko, Kevin G. Fripp, Lukáš Flajšman, Andrey V. Shytov, Volodymyr V. Kruglyak, Sebastiaan van Dijken (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2412-01382.txt.
Introduction
Anton Lutsenko and co-authors test a spin wave device in a 2024 paper. Magnonic resonators could serve as programmable phase shifters for computing with spin waves. Their device pairs a yttrium iron garnet film with a cobalt iron boron stripe. Coupling between them shrinks the wave length and forms a cavity.
Using a special light based microscope and computer simulations, the team shows a full phase flip in the wave that passes through. The shift depends sharply on how the magnetization in the device is aligned. A magnetic switch can thus set it on demand. Low loss makes the part promising for reconfigurable circuits.
Catalog record
| CREATOR | Anton Lutsenko, Kevin G. Fripp, Lukáš Flajšman, Andrey V. Shytov, Volodymyr V. Kruglyak, Sebastiaan van Dijken |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 20 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2412-01382
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Magnonic Fabry-Pérot resonators as programmable phase shifters Anton Lutsenko, Kevin G. Fripp, Lukáš Flajšman, Andrey V. Shytov, Volodymyr V. Kruglyak, Sebastiaan van Dijken Abstract We explore the use of magnonic Fabry-Pérot resonators as programmable phase shifters for spin-wave computing. The resonator, composed of a yttrium iron garnet (YIG) film coupled with a CoFeB nanostripe, operates through dynamic dipolar coupling, leading to wavelength downconversion and the formation of a magnonic cavity. Using super-Nyquist sampling magneto-optical Kerr effect (SNS-MOKE) microscopy and micromagnetic simulations, we demonstrate that these resonators can induce a π \pi phase shift in the transmitted spin wave. The phase shift is highly sensitive to the magnetization alignment within the resonator, allowing for on-demand control via magnetic switching. This feature, combined with low-loss transmission, positions the magnonic Fabry-Pérot resonator as a promising component for reconfigurable magnonic circuits and spin-wave computing devices. Magnonics holds substantial promise for advancing data processing through improvements in energy efficiency, processing speed, and operational functionality Barman et al. 2021 ; Chumak et al. 2022 . In magnonics, information is encoded in the amplitude or phase of spin waves propagating through magnetic films Khitun, Bao, and Wang 2010 ; Mahmoud et al. 2020 . A notable example of a phase-encoded device is the spin-wave majority gate Khitun and Wang 2011 ; Fischer et al. 2017 ; Talmelli et al. 2020 . The operation of this logic gate relies on the interference of three spin waves of equal amplitude, with information encoded in their phases. These phases can be equal to or differ by \pi , causing the phase of the output wave to reflect the majority phase of the inputs. A programmable phase shifter that can modify the phase of propagating spin waves is an essential component for efficient phase-based information processing. Researchers have demonstrated various tunable spin-wave phase shifters based on different operational principles. Among these, nanoscale chiral magnonic resonators, which interact with propagating spin waves via dynamic dipolar fields, stand out Au et al. 2012 ; Fripp, Shytov, and Kruglyak 2021 . These devices produce frequency-dependent adjustments to the spin-wave amplitude and phase that depend on the spin-wave propagation direction and the alignment of magnetization within the resonator Au et al. 2012 ; Fripp, Shytov, and Kruglyak 2021 . Other methods for phase modulation include interactions with magnetic domain walls Hertel, Wulfhekel, and Kirschner 2004 , Oersted fields generated by current-carrying wires Demidov, Urazhdin, and Demokritov 2009 , magnetic defects Baumgaertl, Watanabe, and Grundler 2018 , spin currents Zhang et al. 2020 , regions of inverted magnetization Baumgaertl and Grundler 2021 , and voltage-controlled magnetic domains Qin et al. 2021a . Nonlinear effects at high excitation powers can also induce phase shifts Ustinov et al. 2021 ; Lake et al. 2022 . For successful integration of spin-wave phase shifters into magnonic circuits, several criteria must be met. The phase-shifting elements must be scalable, capable of achieving significant phase modulation over short distances, and operate under low-power conditions to maximize energy efficiency. Additionally, in applications such as field programmable gate arrays and other reconfigurable devices, the phase shift should be controllable. The ability to switch the phase by \pi on demand is a particularly desirable feature in wave-based computing architectures Khitun, Bao, and Wang 2010 ; Mahmoud et al. 2020 . The recently introduced magnonic Fabry-Pérot resonator holds promise for meeting these requirements Qin et al. 2021b ; Talapatra et al. 2023 . This resonator consists of a low-loss magnetic medium, typically an yttrium iron garnet (YIG) film, coupled with a magnetic nanostripe. It operates in a frequency range where spin waves propagate in YIG but remain below the ferromagnetic resonance frequency (FMR) of the nanostripe. Through dynamic dipolar coupling, the resonator achieves nonreciprocal wavelength downconversion, forming a magnonic cavity where spin waves circulate between the edges of the bilayer. This configuration creates narrow gaps in the spin-wave transmission spectrum while maintaining minimal signal loss at intermediate frequencies, enabling low-loss spin-wave manipulation. The significant wavelength reduction within the resonator allows for nanoscale control of micrometer-scale waves. Figure 1: (a) Schematic of the magnonic Fabry-Pérot resonator structure. The resonator comprises a 30-nm-thick CoFeB nanostripe patterned on an 85-nm-thick YIG film. The nanostripe is 850 nm wide and 10 \mu m long. Dynamic dipolar coupling between the CoFeB nanostripe and the YIG film reduces the spin-wave wavelength in the bilayer region. Additionally, due to the chiral nature of dipolar coupling, spin waves propagating in opposite directions exhibit different wavelengths. The propagation directions of the waves with longer \lambda_{2} and shorter \lambda_{3} wavelengths depend on the magnetization orientation in the YIG film. The schematic illustrates the wavelength conversion occurring when the YIG film’s magnetization is aligned along the positive y -direction. (b) Microscopy image of the sample along with the measurement geometry. The distance between the Fabry-Pérot resonator and the 1.5- \mu m-wide microwave antenna is 20 \mu m. We conducted SNS-MOKE microscopy along a measurement line passing through the center of the resonator (indicated by the red dashed line) and along a parallel reference line without the resonator (indicated by the yellow dashed line). Previous research on magnonic Fabry-Pérot resonators has demonstrated their effectiveness in amplitude modulation and wavelength conversion Qin et al. 2021b ; Talapatra et al. 2023 . In this work, we investigate their potential as programmable phase shifters. Using super-Nyquist sampling magneto-optical Kerr effect (SNS-MOKE) microscopy and micromagnetic simulations, we show that these nanoscale resonators can induce a \pi phase shift in the transmitted spin wave near the transmission gap frequency. Additionally, we demonstrate that the phase can be switched on demand by altering the magnetization alignment within the resonator between parallel and antiparallel configurations via an applied magnetic field. Figure 1 shows the sample and measurement geometry. The sample consists of an 85-nm-thick YIG film with a CoFeB nanostripe patterned on top. We grew the YIG film, with a Gilbert damping parameter \alpha=5\times 10^{-4} , on a (111)-oriented single-crystal Gd 3 Ga 5 O 12 (GGG) substrate using pulsed laser deposition (PLD) at room temperature. The film was crystallized through post-deposition annealing at 750 ∘ C for 8 hours in 13 mbar oxygen. The CoFeB nanostripe, composed of a 40:40:20 alloy, was fabricated using electron-beam lithography, magnetron sputtering, and lift-off processes. It is 30 nm thick, 10 \mu m long, and 850 nm wide. The magnetizations of the CoFeB nanostripe and the YIG film couple through dynamic dipolar fields across a 1 nm Ta/3 nm TaO x spacer. Spin waves were excited in the YIG film using a gold microwave antenna positioned 20 \mu m from the Fabry-Pérot resonator. The antenna, measuring 120 nm in thickness, 1.5 \mu m in width, and 50 \mu m in length, was operated at an excitation power of 0 dBm. We applied a magnetic bias field parallel to the antenna to ensure the excitation of Damon-Eshbach spin waves in all experiments. Transmission characteristics of these spin waves through the Fabry-Pérot resonator were analyzed using SNS-MOKE microscopy in a home-built setup Dreyer et al. 2021 ; Qin et al. 2021a . To investigate the resonator’s impact on the amplitude and phase of transmitted spin waves, we conducted SNS-MOKE scans along a horizontal line crossing the center of the CoFeB