Straintronic magnetic tunnel junctions for analog computation: A perspective

Supriyo Bandyopadhyay · 2024

Read Straintronic magnetic tunnel junctions for analog computation: A perspective by Supriyo Bandyopadhyay (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2411-02636.txt.

Description

A 2024 arXiv research paper by Supriyo Bandyopadhyay. The straintronic magnetic tunnel junction (s-MTJ) is an MTJ whose resistance state can be changed continuously or gradually from high to low with a gate voltage that generates strain the magnetostrictive soft layer.

Catalog record

CREATORSupriyo Bandyopadhyay
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE24 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2411-02636

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Straintronic magnetic tunnel junctions for analog computation: A perspective Supriyo Bandyopadhyay Abstract The straintronic magnetic tunnel junction (s-MTJ) is an MTJ whose resistance state can be changed continuously or gradually from high to low with a gate voltage that generates strain the magnetostrictive soft layer. This unusual feature, not usually available in MTJs that are switched abruptly with spin transfer torque, spin-orbit torque or voltage-controlled-magnetic-anisotropy, enables many analog applications where the typically low tunneling magneto-resistance ratio of MTJs (on/off ratio of the switch) and the relatively large switching error rate are not serious impediments unlike in digital logic or memory. More importantly, the transfer characteristic of a s-MTJ (conductance versus gate voltage) always sports a linear region that can be exploited to implement analog arithmetic, vector matrix multiplication and linear synapses in deep learning networks very effectively. In these applications, the s-MTJ is actually superior to the better known memristors and domain wall synapses which do not exhibit the linearity and/or the analog behavior. 1 1 1 Invited perspective Keywords: straintronic magnetic tunnel junction, transfer characteristic, analog arithmetic, analog vector matrix multiplication, linear synapses for deep learning networks. 1 Introduction: The straintronic magnetic tunnel junction Magnetic tunnel junctions (MTJs) are the quintessential spin-to-charge converters which convert magnetic information into electrical information. They are widely used in magnetic memory and logic as a binary switch. The archetypal MTJ is shown in Fig. 1 (a) and consists of an insulating spacer layer sandwiched between two ferromagnetic layers of different material composition or different thickness. All layers are slightly elliptical in cross-section, so that the magnetization of both ferromagnetic layers has an easy axis along the major axis of the ellipse and hence will tend to align along one of the two directions parallel to the major axis. One of the ferromagnetic layers has a fixed magnetization (along the major axis) and is referred to as the “hard layer”, while the other’s magnetization can be changed by an external agent, such as a current or a voltage. It is referred to as the “soft layer”. The resistance of the MTJ, R , measured between the two ferromagnetic layers, is determined by spin-dependent tunneling of electrons between the two ferromagnetic layers, through the insulating spacer layer, and therefore depends on the relative magnetization orientations of the two ferromagnetic layers. The resistance is given approximately by the expression R(\theta)=R_{P}+{{R_{AP}-R_{P}}\over{2}}[1-cos\theta], (1) where \theta is the angle between the magnetizations of the hard and the soft layers, R_{P} is the resistance when the two magnetizations are mutually parallel and R_{AP} is the resistance when the two magnetizations are mutually antiparallel. Usually, R_{AP}>R_{P} . The above expression for the resistance shows that one can change it by changing the angle \theta with an external agent. The external agent can be a current passed through the MTJ which will tend to make the magnetizations parallel or antiparallel depending on the polarity of the current via the mechanism of spin transfer torque (STT) [ 1 , 2 ] . Another technique is to place the MTJ on a strip of heavy metal (HM) like Pt or \beta -Ta (with the soft layer in contact with the strip) and pass a current through the strip which exerts a spin-orbit torque (SOT) on the soft layer’s magnetization to rotate it [ 3 ] , making it either parallel or antiparallel to the magnetization of the hard layer and thereby switching the MTJ’s resistance from R_{P} to R_{AP} . or vice versa. The heavy metal can be replaced with a topological insulator (TI) [ 4 ] or Weyl semi-metal [ 5 ] which also exerts a spin-orbit torque to rotate the soft layer’s magnetization to effect the switching. Yet another technique is to use a voltage instead of a current and it is best suited to ferromagnetic materials whose stable magnetization orientations are out of plane (“up” and “down”) owing to perpendicular magnetic anisotropy. The voltage changes the anisotropy of the soft layer from perpendicular to in-plane and hence rotates the magnetization by 90 ∘ , bringing it from out-of-plane to in-plane. An in-plane magnetic field then causes the magnetization to precess further around it and the voltage pulse is shaped such that it reaches zero when the precession has caused another 90 ∘ rotation to complete a full 180 ∘ rotation of the magnetization. This is referred to as voltage controlled magnetic anisotropy (VCMA) based switching [ 6 ] . Figure 1: (a) A magnetic tunnel junction (MTJ). (b) Switching the MTJ resistance with spin transfer torque (STT). (c) Switching the resistance with spin-orbit torque (SOT). (d) Switching the resistance with voltage-controlled-magnetic-anisotropy (VCMA). (d) Straintronic switching. The diagrams are not to scale. The fourth methodology is relatively uncommon and will work only when the soft layer is made of a magnetostrictive material that is placed in elastic contact with a piezoelectric layer. A voltage applied across the piezoelectric generates biaxial strain underneath the MTJ [ 7 ] and strains the soft layer whose magnetization rotates from the major axis toward the minor axis depending on the sign of the strain (compressive or tensile) [ 8 ] . If the strain is withdrawn as soon as the magnetization has rotated through 90 ∘ in the soft layer’s plane, then a residual torque on the magnetization associated with the out-of-plane excursion of the magnetization during rotation will result in another 90 ∘ rotation in-plane to complete a full 180 ∘ rotation [ 9 ] . There are other (more complicated) ways of flipping the magnetization with strain which do not require precise timing of the voltage pulse (similar to VCMA), but they require applying voltage pulses sequentially using different pairs of gates [ 10 ] . The modality of switching magnetization with strain (where the strain can be generated electrically with the aid of a piezolectric layer placed underneath the soft layer) is referred to as “straintronics” [ 11 ] . The two voltage-controlled mechanisms –- VCMA and straintronics –- are more energy-efficient than the two current controlled mechanisms (STT and SOT), but also much more error-prone. There is seemingly always a trade-off between energy cost and reliability in binary switching which is almost universal [ 12 ] . The four magnetization flipping mechanisms that were discussed are shown in Figs. 1 (b) - (e). Figure 2: The net effective magnetic field experienced by the soft layer of a straintronic magnetic tunnel junction in the presence of: (1) strain of the appropriate sign and (2) dipole coupling with the hard layer. {\bf H}_{s} is the effective magnetic field due to strain and {\bf H}_{d} is the effective magnetic field due to dipole coupling with the hard layer. By varying {\bf H}_{s} continuously with a gate voltage, one can vary \phi and hence the resistance of the s-MTJ continuously between R_{P} and R_{AP} . One very important distinction between straintronics and the other three switching mechanisms is that the other three usually can rotate the magnetization through 180 ∘ and not any arbitrary angle. This will allow the MTJ resistance to assume only two values, R_{P} and R_{AP} . Hence those three mechanisms can implement a binary switch good for digital applications. Straintronics can also

Read the complete text