Wallbounce : Push wall to navigate with Contact-Implicit MPC

Xiaohan Liu, Cunxi Dai, John Z. Zhang, Arun Bishop, Zachary Manchester, Ralph Hollis · 2024

Read Wallbounce : Push wall to navigate with Contact-Implicit MPC by Xiaohan Liu, Cunxi Dai, John Z. Zhang, Arun Bishop, Zachary Manchester, Ralph Hollis (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2411-01387.txt.

Description

Abstract In this work, we introduce a framework that enables highly maneuverable locomotion using non-periodic contacts. This task is challenging for traditional optimization and planning methods to handle due to difficulties in specifying contact mode sequences in real-time. To address this, we use a bi-level contact-implicit planner and hybrid model predictive controller to draft and execute a motion plan.

Catalog record

CREATORXiaohan Liu, Cunxi Dai, John Z. Zhang, Arun Bishop, Zachary Manchester, Ralph Hollis
YEAR2024
COLLECTIONPAPERS
FORMATTXT
FILE SIZE28 KB
VERSION1.0
LICENSEhttp://creativecommons.org/licenses/by/4.0/
RIGHTSCC BY
SOURCEarXiv

Source: https://arxiv.org/abs/2411-01387

Browse the full library · About the Tower of Babel

Full text

The opening of the work, from the library's hosted text:

Wallbounce : Push wall to navigate with Contact-Implicit MPC Xiaohan Liu, Cunxi Dai, John Z. Zhang, Arun Bishop, Zachary Manchester, Ralph Hollis Abstract In this work, we introduce a framework that enables highly maneuverable locomotion using non-periodic contacts. This task is challenging for traditional optimization and planning methods to handle due to difficulties in specifying contact mode sequences in real-time. To address this, we use a bi-level contact-implicit planner and hybrid model predictive controller to draft and execute a motion plan. We investigate how this method allows us to plan arm contact events on the shmoobot, a smaller ballbot, which uses an inverse mouse-ball drive to achieve dynamic balancing with a low number of actuators. Through multiple experiments we show how the arms allow for acceleration, deceleration and dynamic obstacle avoidance that are not achievable with the mouse-ball drive alone. This demonstrates how a holistic approach to locomotion can increase the control authority of unique robot morpohologies without additional hardware by leveraging robot arms that are typically used only for manipulation. Project website: https://cmushmoobot.github.io/Wallbounce I INTRODUCTION Humans and animals possess the incredible natural ability to leverage interactions between all parts of their bodies and the environment to achieve highly agile and dynamic locomotion behaviors. These interactions enable them to increase their control authority and locomotion capabilities beyond what can be achieved with legs alone. For example, parkour athletes use their hands to push off against walls and navigate around obstacles. Inspired by these capabilities, solving complicated locomotion tasks by leveraging diverse contact sources has been a long-standing challenge in robotics research. Existing literature on multi-contact motion planning and control largely considers locomotion [ 1 ] [ 2 ] and manipulation [ 3 ] as separate research problems. In recent years, the rising interest in generalist robot agents has accelerated the design of robot hardware platforms equipped with both wheeled bases or legs for locomotion and arms for manipulation [ 4 ] , [ 5 ] , [ 6 ] . This new trend in robot morphology also introduces interesting research questions on how one can take advantage of the addition of robot arms during locomotion to augment the capabilities and robustness of the robot. Despite these increasingly mature human-like robot form factors, systems capable of solving challenging locomotion problems while leveraging upper-body capabilities remain understudied. Integrating upper limb contacts into a Model Predictive Control (MPC) framework, however, is challenging. MPC often requires a predefined contact schedule for each contact point. For legged locomotion, where contacts are typically periodic, a contact schedule can be generated with heuristics [ 2 , 6 ] . For upper limb contacts, determining the timing and duration of contact for other parts of the body is difficult. Most of the existing work rely on a hand-crafted contact schedule for upper limbs [ 7 , 8 ] . Other works use search-based methods to find possible contact strategies [ 9 , 10 ] . However, these methods are based on kinematics and quasi-static analysis and cannot capture the dynamic effect of the robot. Fig. 1: Time-lapse picture of CMU shmoobot making a sharp turn by pushing wall. In this paper, we investigate using end effector contact on the CMU shmoobot (a smaller CMU ballbot [ 11 ] ) to enhance its balance, locomotion, and navigation capabilities. Shmoobot uses a single ball drive to achieve dynamic balancing with a low number of actuators while remaining maneuverable in tight human spaces. However, this unique morphology limits how quickly Shmoobot can change its momentum, making it less robust when encountering unexpected obstacles while moving or experiencing large disturbances. We explore how we can use the arms the robot would typically use for manipulation to address these limitations during locomotion, increasing shmoobot’s robustness and reactivity with no additional hardware. We propose a bi-level Model-Predictive Control (MPC) framework that enables our robot to discover and utilize upper limb contacts during locomotion. At the higher level, we use contact-implicit optimization to identify potential contact schedules. Then, at a lower level, we deploy a hybrid trajectory optimization with this fixed contact schedule to generate smooth, feasible motion plans. Finally, we implement this framework on the CMU shmoobot platform and demonstrate its capabilities through several hardware experiments. Our specific contributions are: 1. A bi-level MPC framework that can reason about acyclic contacts and leverage upper limb contacts in locomotion. 2. Deployment and evaluation of the proposed framework on a novel bi-manual service robot that balances on a ball. 3. Experiments demonstrating how upper limb contacts can effectively assist in robot locomotion. II Related Works II-A Locomotion With Upper Limb Contacts Like humans, human-like robots can use their upper limbs to assist with locomotion. Research [ 12 ] explored how a humanoid robot can make contact with a wall to prevent falling, while [ 10 , 7 ] demonstrated how arm contact can help robots traverse challenging terrains. More related research studied how robots can gain acceleration by making contact with the environment. Reference [ 13 ] focuses on transferring human wall-pushing skills directly to robots. In [ 14 ] , the researcher developed a reflex-based controller that can control the moving direction of a robot after contact with a wall. Our work focuses on an optimization-based framework that enables the CMU shmoobot to autonomously leverage upper limb contact without pre-specification during locomotion and navigation. II-B Contact-Implicit Optimization Optimization-based algorithms can be a powerful tool when planning over contact mode schedules and timings. In particular, contact-implicit optimization (CIO) [ 15 , 16 ] does not require predefined contact timings or locations, allowing the algorithm to explore different contact patterns. One common method for solving CIO is to formulate contact dynamics as complementarity problems [ 17 ] . Research [ 18 ] treats the contact dynamics as constraints and solves them with the direct collocation method. A higher-order collocation method [ 19 , 15 ] , solves the problem using HTO to refine the solution for faster convergence. However, due to the non-smooth nature of the contact dynamics, these methods are numerically unstable and take a long time (minutes to hours) to converge [ 20 ] , making them unpractical during deployment in online MPC settings without specialized solvers [ 21 ] . Another approach of solving CIO is by using compliant contact models. Works [ 22 , 23 ] , use a continuous contact flag to control the allowed contact force. Other works [ 24 , 25 ] , use a nonlinear spring-damper system to model contact and solve the CIO problem with DDP-based methods. Compliant contact models make fast, real time CIO possible. However, soft contact models often introduce physical artifacts like force at a distance, which makes the planned trajectory hard to track for the hardware. III Background III-A Platform Description The CMU shmoobot (Fig. 2 (a)) is a 1.2 m tall robot that balances on a ball wheel. The robot has a pair of 3-DOF torque-controllable arms mounted onto its body. The ball is actuated by a four-motor Inverse Mouse-Ball Drive mechanism (IMBD) [ 11 ] . A pair of actuated opposing rollers drive the ball in each of the two orthogonal motion directions, which allows omnidirectional motion on the floor. A slip

Read the complete text