Probing trade-off between critical size and velocity in cold-spray: An atomistic simulation
Mahyar Ghasemi, Alireza Seifi, Movaffaq Kateb, Jon Tomas Gudmundsson, Pascal Brault, Pirooz Marashi · 2024
Read Probing trade-off between critical size and velocity in cold-spray: An atomistic simulation by Mahyar Ghasemi, Alireza Seifi, Movaffaq Kateb, Jon Tomas Gudmundsson, Pascal Brault, Pirooz Marashi (2024) in the Tower of Babel, a free online library of public-domain works preserved in clean, searchable text. No sign-up. The full text is served as a plain-text file at a predictable URL, where text is present: https://antarctic-labs.com/tower-of-babel/arxiv-2411-01328.txt.
Description
Abstract The detailed mechanism of bonding in the cold spray process has remained elusive for both experimental and theoretical parties. Adiabatic shear instability and hydrodynamic plasticity models have been so far the most popular explanations. Here, using molecular dynamics simulation, we investigate their validity at the nanoscale.
Catalog record
| CREATOR | Mahyar Ghasemi, Alireza Seifi, Movaffaq Kateb, Jon Tomas Gudmundsson, Pascal Brault, Pirooz Marashi |
|---|---|
| YEAR | 2024 |
| COLLECTION | PAPERS |
| FORMAT | TXT |
| FILE SIZE | 42 KB |
| VERSION | 1.0 |
| LICENSE | http://creativecommons.org/licenses/by/4.0/ |
| RIGHTS | CC BY |
| SOURCE | arXiv |
Source: https://arxiv.org/abs/2411-01328
Browse the full library · About the Tower of Babel
Full text
The opening of the work, from the library's hosted text:
Probing trade-off between critical size and velocity in cold-spray: An atomistic simulation Preprint: JVSTA Mahyar Ghasemi, Alireza Seifi, Movaffaq Kateb, Jon Tomas Gudmundsson, Pascal Brault, Pirooz Marashi Abstract The detailed mechanism of bonding in the cold spray process has remained elusive for both experimental and theoretical parties. Adiabatic shear instability and hydrodynamic plasticity models have been so far the most popular explanations. Here, using molecular dynamics simulation, we investigate their validity at the nanoscale. The present study has potential application for the fabrication of ultra-thin layers for the electronics industry. For this aim, we considered Ti nanoparticles of different diameters and Si substrates of different orientations. It is shown that very high spray velocities are required for a jet to be observed at the nanoscale. We propose a method for thermostating the substrate that enables utilizing high spray velocities. For the first time, we demonstrate an oscillatory behavior in both the normal and radial stress components within the substrate that can propagate into the particle. We have shown that neither the adiabatic shear instability model nor the hydrodynamic plasticity model can be ignored at the nanoscale. Besides, the formation of a low-resistance titanium silicide proper for electronic application is illustrated. I Introduction Cold spray ( Assadi et al. 2003 ; Adaan-Nyiak and Tiamiyu 2023 ) is a deposition method in which particles are accelerated towards a substrate by supersonic expansion of a gas stream. The term cold refers to the fact that, unlike thermal spray ( Herman et al. 2000 ) , there is no phase change, especially melting, prior to the particle impact onto the substrate and thus the adhesion is solely dependent on the spray velocity ( V_{0} ) that produces strain rates on the order of 1/ns ( Assadi et al. 2003 ) during the impact. Despite the growing interest in the real-time imaging of the single particle collision ( Adaan-Nyiak and Tiamiyu 2023 ; Hassani-Gangaraj et al. 2018a ) , the temporal and spatial resolution required for understanding the detailed mechanism is experimentally beyond the reach. Thus our understating of the cold spray process is limited to theories based on the post-deposition characterization. To verify hypotheses regarding the detailed cold spray process mechanism, simulation and modeling have been shown promising (cf. Refs. Assadi et al. 2003 ; Rahmati and Ghaei 2014 ; Fardan et al. 2021 ). In particular, the time scale in molecular dynamics (MD) simulations is highly compatible with that of the cold spray i.e. V_{0} translates to 1 – 3 lattice parameters per ps and strain rates on the order of 100/ps can be achieved Jami and Jabbarzadeh 2019 ; Jami and Jabbarzadeh 2021 . Besides, there is a growing interest in the nanoparticle cold spray technique ( Samuel et al. 2017 ; Wang et al. 2017 ; An et al. 2020 ; Park et al. 2020 ; Watanabe et al. 2023 ) . MD simulations have been verified to capture nanoscale phenomena owing to their atomistic resolution ( Kateb and Dehghani 2012 ; Kateb et al. 2018 ; Azadeh et al. 2019 ; Kateb 2020 ) . Several MD simulation studies have been conducted on the cold-spray process (cf. Ref. ( Fardan et al. 2021 ) and Refs. therein). Probably Gao et al. 2007 were the first to demonstrate simulations of the cold spray process by MD. They pointed out that the process involves partial melting behavior. In an another interesting approach, Daneshian and Assadi 2014 used the low-cost Lennard-Jones force field in 2D and modified its cut-off to model brittle particle impact on a rigid substrate. Their simple model showed a fair agreement with the analytical approach and captured many critical facts including plastic deformation below a certain size. There have been efforts to study nanoparticle cold spray using MD simulations to achieve ultra-thin, yet uniform films, suitable for the electronics industry. It has been shown that deposition under an angle, namely a larger off-normal angle (30 ∘ ), increases the film uniformity ( Joshi and James 2018 ) . However, the quality of the film, as measured by residual stress, becomes inferior due reduction in the normal component of the spray velocity V_{0} ( James and Shah 2020 ) . Thus, one may need to increase the spray velocity V_{0} beyond the current limits to reach optimum uniformity and stress. The plastic deformation correlation with local temperature and their dependence on the spray velocity V_{0} were demonstrated by Jami and Jabbarzadeh 2019 using MD simulations. They also reported minimal changes with the particle size (2 and 20 nm) except for the fact that size-dependent melting temperature may contribute to the process. Later, they studied the TiO 2 /Ti system using a relatively expensive force field ( Jami and Jabbarzadeh 2021 ) . They observed plastic deformation of brittle TiO 2 in agreement with the simple 2D model ( Daneshian and Assadi 2014 ) . Rahmati et al. 2020 studied a wide range of particle sizes (5 – 40 nm) for the Cu/Cu system and demonstrated localization of the dislocation network inside the particle next to the substrate. The possibility of mesoscale simulation and polycrystalline Al/Al system using quasi-course-grained has also been demonstrated ( Suresh et al. 2020 ) . However, they maintained their substrate temperature at 150 K to avoid stability issues. Many of the above-mentioned studies are set up as a proof of principle studies, so they consider a similar composition for both the nanoparticle and the substrate ( Gao et al. 2007 ; Joshi and James 2018 ; James and Shah 2020 ; Rahmati et al. 2020 ; Pereira et al. 2021 ) . Such an assumption normally leads to non-realistic interface behaviors. As we showed earlier ( Kateb et al. 2019 ; Kateb et al. 2020 ; Kateb et al. 2021 ) , for Cu/Cu deposition by various methods, film-substrate similarity might overestimate intermixing even with high accuracy force fields such as EAM Goel et al. 2014 . Moreover, the energy barrier for re-crystallization of a pure amorphous interface is negligible which can exaggerate post-impact crystal recovery ( Gao et al. 2007 ; Pereira et al. 2021 ; Goel et al. 2014 ) . While some studies were justly focused on the effect of the spray velocity V_{0} , they delivered the results in a limited velocity window 300 – 500 m/s, or even neglected the particle size effect (cf. Ref. ( Jami and Jabbarzadeh 2021 ; James and Shah 2020 ) ). As pointed out by Pereira et al. 2021 , a spray velocity V_{0} over 500 m/s is suggested to break surface oxide/contamination of Cu particles. Earlier, Assadi et al. 2003 proposed V_{0}> 550 m/s for adiabatic shear instability to occur for Cu. The low V_{0} has probably been a technical issue associated with the lack of, or improper substrate thermostating, as hinted by ( Gao et al. 2007 ; Rahmati et al. 2020 ) . In the method section we proposed utilizing a three-layer substrate scheme, a common method in high energy ion bombardment simulation, that allows performing cold spray at very high V_{0} . This is important because the drag force exerted by gas expansion is proportional to the particle’s cross-section or surface