LLNL-TR-2023569 SULI Peer Review C Horwood, S Satyanarayana Sep 2026 This document was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor Lawrence Livermore National Security, LLC, nor any of their employees makes any warranty, expressed or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or Lawrence Livermore National Security, LLC. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or Lawrence Livermore National Security, LLC, and shall not be used for advertising or product endorsement purposes. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344. Project Title: Development and Validation of a Python Workflow for ZYGO Double- Sided Thickness Measurement Poster Author: Gillian Woo Peer Reviewer: Sarasvati Satyanarayana The main purpose of Gillian’s project was to convert and expand pre-existing MATLAB scripts for the ZYGO interferometer machine into Python. The project had a clear focus and was very informative. The presenter explained that MATLAB was difficult to work with, while Python is more accessible because many tutorials and resources are available. She described how she converted and improved existing MATLAB code, the troubleshooting involved, and the features she developed independently. The project was well researched, and the presenter demonstrated strong familiarity with both Python and MATLAB. She explained how the ZYGO instrument uses lasers to collect surface data from both sides of a sample and calculate thickness, flatness, and parallelism. The software aligns the top and bottom scans using fiducials, levels the images, converts the data into matrices, and calculates distances between corresponding points. She also discussed creating heat maps to display thickness variation, and the development of flexible regions of interest that can include ellipses, rectangles, and polygons. Although she provided a lot of context, more background information on why measurements such as flatness and parallelism are important for NIF target fabrication would have strengthened the presentation. The poster was also very easy to follow. The abstract and introduction were located on the left, and the remaining sections presented the project in chronological order. The subsection headings were informative and clear, even without the presenter’s explanation. The visual design was also effective. Tables helped organize the information and made the poster easier to read than if it had contained only large blocks of text. The layout was clear, and the text was large enough to read from a distance. The presenter was well rehearsed without sounding robotic. She demonstrated a strong understanding of the poster and explained the challenges involved, including debugging, angle measurements, and unit conversions between files. She spoke at a good pace, made eye contact, and paused between sections so the audience could follow the technical details. Although she did not use notes, she referred to the poster when necessary and pointed out relevant figures, which made the presentation feel natural rather than scripted. She also did a great job of reiterating concepts that might have been unclear. I asked what the ZYGO machine is typically used for, and she explained that it measures thin, micron- scale films to evaluate thickness and other features before they are incorporated into target lenses. I also asked which parts of the workflow were created from scratch instead of converted from MATLAB. She explained that the thickness calculation was converted but heavily revised, while the user interface and flatness code were developed from scratch. Overall, the presentation was informative, well organized, and visually effective. The presenter clearly understood both the technical challenges and the purpose of the project. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.