Cooperative Research and Development Agreement Final Report CRADA TC02463 February 8, 2026 Justin Galbraith, INTEGRATED PROCESS MODEL UTILIZATION AND DEVELOPMENT FOR INERTIAL FUSION ENERGY Innovations and Partnerships Office COOPERATIVE RESEARCH AND DEVELOPMENT AGREEMENT (CRADA) FINAL REPORT CRADA NO. TC02463 | INTEGRATED PROCESS MODEL UTILIZATION AND DEVELOPMENT FOR INERTIAL FUSION ENERGY REPORT DATE: 02/08/2026 In accordance with requirements set forth in the terms of the CRADA, this document serves as the respective CRADA’s Final Report, including a list of Subject Inventions. It is to be forwarded to the DOE Office of Scientific and Technical Information, as part of the commitment to the public to demonstrate results of federally funded research. Parties to the Agreement: Lawrence Livermore National Security, LLC Lawrence Livermore National Laboratory 7000 East Avenue Livermore, CA 94550 Justin Galbraith Email: galbraith4@llnl.gov Longview Fusion Energy Systems, Inc. 2150 Portola Avenue, Suite D PMB 2030 Livermore, CA 94551 John Post Email: johnpost@longviewfusion.com 02/08/2026 1/6 CRADA No. TC02463 Final Report If Applicable: Sponsoring DOE Program Office(s): • DOE/NNSA, through LLNL’s M&O contract (DE-AC52-07NA27344) • DOE Office of Science, Fusion Energy Sciences (FES) Joint Work Statement Funding Table showing initial funding commitment for 18-month agreement as of CRADA effective date: Year 1 Year 2 Year 3 Funding Type Funds-in *In-kind Funds- *In-kind Funds-in *In-kind Totals in Longview Fusion Energy $0 $49,333 $0 $148,000 $0 $24,667 $222,000 Systems, Inc. Dept. of Energy (DE-AC52- $52,662 $170,290 $29,998 $252,950 07NA27344) Totals $101,995 $318,290 $54,665 $474,950 **Federal Administrative $0 $0 $0 $0 Charge (FAC) Executive Summary of CRADA Work: This CRADA between LLNS and Longview Fusion Energy Systems utilized a modernized LLNL Integrated Process Model (IPM) to assess technoeconomic viability and power plant configurations for Inertial Fusion Energy (IFE). During the collaboration period, a streamlined IPM model was produced by LLNL, which consolidated a combination of 3 models under one file. Additionally, obsolete parameters were removed and parameters available for trade space analysis were organized in a user-friendly fashion on the front interface. Gain scaling curves were discussed and analyzed in the framework of the IPM. Additional updates were made to account for cost scaling to today's dollars using an average inflation rate. Heat transfer material costing was updated using a ground up approach with public vendor data. Further levelized cost of electricity (LCOE) methods and models were discussed and reviewed for applicability to the IPM. Prior published literature on optical scaling was also discussed. Moreover, as part of this CRADA, the Participant developed a fusion technology development roadmap and point designs. This research adds to the understanding of IFE plant design by providing an updated, self - 02/08/2026 2/6 CRADA No. TC02463 Final Report consistent modeling framework that integrates target gain scaling, laser efficiency, balance- of-plant performance, and lifecycle costs into quantitative point designs. The resultant materials and methods enable consistent comparisons of IFE architectures and clarify sensitivity to key drivers of cost and performance. While final economic feasibility will depend on commercial implementation choices and market conditions, the analyses provide decision-quality inputs to R&D priorities and early-stage project scoping. Benefits to the public include advancing fusion energy design methods, informing policy and investment decisions with better data, and accelerating the pathway toward fusion power generation in support of U.S. competitiveness. Summary of Research Results: Technical Objectives: • Original Objectives: Utilize and develop LLNL’s IPM (IPM-V1.0-DS-LLNLV1, CP02892) to conduct trade space analyses and evaluate Participant-proposed IFE plant designs. Update performance and cost bases to reflect contemporary technology data, vendor inputs, and expected maturation over approximately a 10-year horizon. Generate quantitative, self-consistent point designs for Participant’s MEP (Market Entry Plant) and NOAK (Nth of a Kind) plants. Produce a Technology Development Roadmap and conduct workshops to inform and engage the technical community. • Approaches Used: o Trade space exploration across a wide range of inputs, with sensitivity analyses to identify cost and performance drivers. o Incorporation of cost escalation factors. o Iterative point design development for MEP and NOAK plants using IPM outputs and engineering constraints from Participant and partners. o Discussions for knowledge transfer on laser architectures, target manufacturing, fusion engine materials, tritium handling, and integrated plant design. • Problems Encountered and Methodology Adjustments: o N/A. • Technical Data and Assumptions: o Laser subsystem assumptions reflecting modern DPSSL performance envelopes, optical architectures, and driver module integration constraints. o Balance-of-plant assumptions for power conversion efficiencies, cooling systems, tritium fuel cycle approaches, availability modeling, and maintenance factors. o Cost bases integrating vendor inputs, conventional equipment costs, indirect factors, escalation indices, and sensitivity ranges. 02/08/2026 3/6 CRADA No. TC02463 Final Report Actual Accomplishments: • Task 1: Updated IPM datasets and conducted trade space analyses of IFE reactor designs, including Participant point designs. o Deliverable 1.1: Technology update integrating various aspects of performance and cost bases. LLNL provided historical LIFE documentation to Participant to facilitate collaborative updates, including LIFE Basis-of-Estimate, Delivery Plan, Pre-Conceptual Design Report, Scoping Assessment, LIFE plant CAD model, and misc. Parsons Corporation documents. Participant, in cooperation with Parsons Corporation, provided additional LIFE documents developed in collaboration with Parsons Corporation previously under the LIFE effort. Participant provided mentorship and support to the CRADA team during the development of code changes from IPM-V1.0-DS-LLNLV1 to IPM-V2.0-DS-LLNLV1. o Deliverable 1.2: Software update reflecting revised cost scaling. Cost scaling based on inflation rate, enabling cost estimate with same reference value throughout model. Cost models were traded, considering different cost of electricity modeling methods (LCOE in existing IPM model and verification/cross- reference with Lazard method using internal rate of return). Participant also made substantial coding changes beyond IPM-V2.0-DS-LLNLV1 including changes to the gain scaling, combination of learning and technology maturation, calculation flow charts, and additional user interfaces. During the assessment of IPM, high-impact subsystems were identified where the original scaling rules required modification. These updates ensure that subsystem costs more accurately reflect variations in plant geometry, beamline count, and thermal power. Participant held discussions with industrial partner and received information for conventional facilities and support equipment. Some of this information was shared in a draft of the final report developed by the Participant and presented to LLNL on January 30, 2026. These strategies are and will be implemented into a Longview version of an advanced integrated model. This analysis identified key opportunities across five major domains—Tritium Processing, Power Conversion, Laser Cooling, Buildings/Structures, Electrical Systems, and Common Project Practices—to optimize design, reduce costs, and improve operational efficiency. The recommendations address regulatory alignment, layout improvements, modularization, structural simplification, equipment consolidation, and lifecycle cost savings. o Deliverable 1.3: General trade space and trend analysis discussed during technical discussions. No specific details were incorporated into LLNL IPM. Participant completed and performed extensive trade space analyses and sensitivity parameter studies. The data produced from these studies led to tools for the use of artificial intelligence and machine learning models to calculate plant costs, which is 02/08/2026 4/6 CRADA No. TC02463 Final Report considered Longview Confidential Information and was outside the scope of the CRADA. • Task 2: Developed and documented new point designs for Participant’s MEP and NOAK plant. o Deliverable 2.1: Participant MEP and NOAK point designs and supporting technoeconomic analysis completed. • Task 3: Periodic IPM reviews and dataset updates. o Deliverable 3.1: Monthly joint meetings conducted; iterative feedback incorporated throughout. Initial IPM provided by LLNL, LLNL’s IPM-V1.0-DS- LLNLV1 (CP02892). Major IPM update provided by LLNL, IPM-V2.0-DS-LLNLV1 (CP 2025-273) with improvements to user interface, model function, and file consolidation. • Task 4: Technology Development Roadmap updated. o Deliverable 4.1: Roadmap completed by Participant, leveraging IPM analysis, prior LIFE program insights, and recent Participant concepts. • Task 5: Collaborative workshops conducted. o Deliverable 5.1: Multiple joint in-depth technical discussions held with LLNL and Participant; topics included laser beamline integration, high-repetition target injection, target mass manufacturing, fusion engine materials and maintenance, tritium fuel cycle, integrated plant design, and associated techno-economic modeling • Task 6: Final Report and Abstract prepared and submitted to OSTI per Article X. o Deliverable 6.1: Final report (this document) and abstract prepared for OSTI, with DOE field office notified. Subject Inventions: • No Subject Inventions have been reported under CRADA TC02463. • If Subject Inventions are identified, they will be disclosed to DOE and to both Parties within the required timeframes and updated in this section to include titles, inventors, and related application information. The Government retains a nonexclusive, nontransferable, irrevocable, paid-up license to practice or have practiced for or on behalf of the United States every Subject Invention under this CRADA throughout the world, per Article VI.C. 02/08/2026 5/6 CRADA No. TC02463 Final Report Technology Transfer Activities: • Products and Applications: o Modernized IPM framework integrated for IFE plant technoeconomic analysis, with enhanced user interface and subroutines. No Protected CRADA Information has been incorporated into IPM-V2.0-DS-LLNLV1 retained by LLNL. Public releases, if any, will be at LLNL’s sole discretion and may be informed by Participant input. o Participant MEP and NOAK point designs documented for internal use and roadmap development. • Publications and Public Releases: o CRADA abstract prepared and submitted to DOE OSTI at execution. o Final Report prepared for submission to DOE OSTI and DOE field office per Article X. o Additional scientific and technical information may be provided to DOE upon request up to two years from submission of the final report, subject to confidentiality and protection provisions. • Collaborations: o Engagement with Parsons Corporation to obtain limited additional historical data from LLNL LIFE effort. Interactions aligned with DOE-FES IFE-STAR STARFIRE context to support broader community standards and comparisons where permissible. o Participant held discussions with industrial partner and received information for conventional facilities and support equipment. o Participant and LLNL held an IPM workshop at LLNL prior to the start of the CRADA describing the IPM and its capabilities. • Intellectual Property: o Background IP referenced in Appendix C of the CRADA, including LLNL’s IPM-V1.0- DS-LLNLV1 (CP02892), LLNL’s IPM-V2.0-DS-LLNLV1 (CP 2025-273) and LLNL proprietary information contained within LLNL’s IPM-V1.0-DS-LLNLV1 and IPM- V2.0-DS-LLNLV1. 02/08/2026 6/6 CRADA No. TC02463 Final Report