Bowtie VarQTE: A Resource-Efficient Quantum State Preparation Primitive Marc Drudis, Alberto Baiardi, Mattia Chiurco, Francesco Tacchino, Stefan Woerner, Christa Zoufal Abstract The preparation of quantum states is a fundamental requirement for many quantum algorithms. A native route to preparing physically structured states is based on short-time simulation of dynamical processes, such as real or imaginary time evolution. This work presents a resource-efficient framework for the approximation thereof with bowtie VarQTE ( VarQTE ) which uses classical simulation where possible and quantum resources where necessary. We introduce a framework that leverages existing causal light-cones to minimize quantum resource requirements in the evaluation of gradient and quantum geometric tensor terms by utilizing classical simulation methods for causally relevant subcircuits. This in turn enables exact parameter updates according to McLachlan’s variational principle and, thereby, improves numerical stability. We conduct a comparison with a state preparation method that is based on a tensor-network compiled Trotter algorithm: approximate quantum compilation (AQC). In recent work, this approach has shown impressive performance. However, its key-bottleneck is the necessity to have a classical (approximate) representation of the target state. Our numerical experiments indicate that bowtie VarQTE can achieve comparable fidelities without this requirement. We further illustrate how bowtie VarQTE can facilitate a state-preparation pipeline that combines the simulation of imaginary and real time evolution for a sample-based quantum algorithm. In fact, results on 2D systems show how bowtie VarQTE can reduce the quantum requirements compared to standard, sample-based Krylov diagonalization calculations. Our results indicate that VarQTE is a promising primitive for the preparation of physically structured quantum states that reduces requirements on quantum resources by leveraging existing structures and the associated possibility of enabling classical simulations. I Introduction Efficient quantum state preparation underpins the performance of a wide range of quantum algorithms, playing a decisive role in applications from ground state search algorithms, such as sampling-based quantum diagonalization and quantum phase estimation to Hamiltonian simulation, and even partial differential equation simulations. In many such algorithms, the success probability, accuracy, and overall resource requirements are critically dependent on the quality of the initial state, often relying on substantial overlap with specific eigenstates or low-energy subspaces of interest. Consequently, the cost of preparing these structured input states can dominate the total computational complexity, even hinder potential quantum speedups. Hence, designing scalable, robust, and hardware-efficient state preparation protocols has emerged as a central obstacle in realizing the practical potential of quantum algorithms across diverse application domains. Real- and imaginary-time evolution provide a natural framework for the preparation of physically motivated quantum states by driving a quantum system toward a desired target-state manifold. The prevailing state-of-the-art approach to simulating the time evolution of a k -local Hamiltonian is based on product-formula methods constructed via Trotterization 41 ; 40 ; 24 . For real-time evolution, such Trotter circuits are straightforward to implement and are accompanied by rigorous analytical bounds that quantify the trade-off between simulation error and circuit depth. Nevertheless, attaining high-precision evolution typically requires circuit depths that are prohibitively large for early-generation quantum hardware. The situation is further complicated for imaginary-time evolution, where Trotter-based implementations do not directly yield unitary dynamics and instead rely on mappings to effective unitary ansätze 28 . Closely related are adiabatic state-preparation protocols, which offer a conceptually simple route to preparing correlated ground states, but are fundamentally limited by the minimum spectral gap encountered along the interpolation path, leading to long evolution times and unfavorable scaling for many systems of practical interest. Variational Quantum Time Evolution ( VarQTE ) 47 ; 26 offers an alternative to Trotter and adiabatic simulation that is directly applicable to real and imaginary time evolution. It employs McLachlan’s variational principle 27 to propagate the parameters of a variational ansatz over discretized time steps with ordinary differential equation (ODE) solvers. The goal is to project the evolution trajectory onto the variational manifold given by a parameterized ansatz. Unlike Trotter approaches that approximate the full evolution operator, VarQTE focus on approximating the action of the time evolution on a specific initial state. Notably, the underlying variational principle facilitates the efficient computation of a-posteriori state preparation error bounds 25 ; 48 –an important contrast to most variational quantum algorithms. The feasibility of the practical realization and accuracy of VarQTE strongly depend on the required number of circuit evaluations, the expressivity of the variational ansatz, and the chosen time integration method. The main contributions of this work are as follows: First, we introduce a method to compute the QGT ( QGT ) of a variational quantum circuit at system sizes that lie beyond the reach of existing approaches–which are discussed in Appendix A . Our approach builds upon the mathematical structure of the QGT . More specifically, we identify causal light-cones 6 and effectively isolate the relevant sub-systems such that the problem is decomposed into the independent simulation of smaller, tractable sub-circuits which can be analytically computed. This capability, in turn, enables a systematic study of VarQTE at scale, based on causal locality: bowtie VarQTE . The underlying framework allows the balanced use of classical and quantum resources. More specifically, supporting VarQTE with classical simulation techniques–where possible–enables approximations with good fidelities. The use of quantum resources can, thus, be focused on classically difficult operations such as sampling from states with high degrees of entanglement or magic. This approach ensures numerical stability and physical reliability throughout the evolution while offering computational efficiency. For the system sizes considered in this work, alternative approaches are either prohibitively slow or yield only approximate estimates. Finally, we show that bowtie VarQTE can be used for state-preparation by combining imaginary- and real-time VarQTE within a sampling-based quantum algorithm. We benchmark our approach against AQC ( AQC ) 33 ; 30 ; 21 , a widely used state-preparation method that employs classical tensor-network techniques 4 to compile Trotter-based quantum circuits into short-depth approximations. Notably, this method–unlike bowtie VarQTE–requires access to a classical (approximation) of the target system. We find that our method achieves similar state preparation fidelities by directly following the variational principle underlying McLachlan 27 . Furthermore, we explore a state-preparation protocol of a 2D system in a sampling-based quantum diagonalization algorithm which requires the combination of both real- and imaginary-time evolution. Finally, we analyze the computational resources required to evaluate the quantities governing bowtie VarQTE and compare it to AQC . The remainder of this paper is structured as follows. Firstly, a brief overview of VarQTE is given in Sec. II . We introduce bowtie VarQTE in Sec. III and present the main results of this work in Sec. IV . Finally, we provide a discussion and an outlook in Sec. V . II Variational Quantum Time Evolution II.1 McLachlan’s Variational Principle A central challenge in quantum simulation is the preparation of states that accurately approximate the dynamics of a target Hamiltonian underlying real or imaginary time evolution. VarQTE enables an approximate representation of such time evolved states. Definition 1 (Variational Quantum Time Evolution) . VarQTE describes the approximation of the real or imaginary time evolution \displaystyle\partial_{t}\ket{\psi^{\text{real}}(t)} \displaystyle=-iH\ket{\psi^{\text{real}}(t)}, (1) \displaystyle\partial_{\tau}\ket{\psi^{\text{imag}}(\tau)} \displaystyle=-\frac{H\ket{\psi^{\text{imag}}(\tau)}}{\bra{\psi^{\text{imag}}(\tau)}H\ket{\psi^{\text{imag}}(\tau)}}, (2) of a state \ket{\psi(t)} according to a k- local Hamiltonian H=\sum_{i=0}^{N_{h}}c_{i}h_{i} for time t with an n -qubit parameterized ansatz \lvert{\psi(\boldsymbol{\theta}_{t})}\rangle=U(\boldsymbol{\theta}_{t})\ket{0}^{\otimes n} where \boldsymbol{\theta}_{t}\in\mathbb{R}^{m} by mapping the time dependence onto the ansatz parameters: \boldsymbol{\theta}\rightarrow\boldsymbol{\theta}_{t} . The parameter propagation follows a time-discretized ODE ( ODE ) defined through McLachlan’s variational principle. This principle requires that at each time step the following gradient quantities are computed for real and imaginary time, respectively: \displaystyle b^{\text{real}}_{i}(\boldsymbol{\theta}_{t}) \displaystyle=\imaginary\left(\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|H|\psi(\boldsymbol{\theta}_{t})\rangle\right.- (3) \displaystyle\left.\hskip 31.29802pt\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|\psi(\boldsymbol{\theta}_{t})\rangle E_{\boldsymbol{\theta}_{t}}\right), (4) \displaystyle b^{\text{imag}}_{i}(\boldsymbol{\theta}_{t}) \displaystyle=-\real\left(\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|H|\psi(\boldsymbol{\theta}_{t})\rangle\right), (5) with E_{\boldsymbol{\theta}_{t}}=\langle\psi(\boldsymbol{\theta}_{t})|H|\psi(\boldsymbol{\theta}_{t})\rangle and the QGT \displaystyle\begin{split}g_{ij}(\boldsymbol{\theta}_{t})=&\real\left(\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|\partial_{j}\psi(\boldsymbol{\theta}_{t})\rangle\right.\\ &\left.-\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|\psi(\boldsymbol{\theta}_{t})\rangle\langle\psi(\boldsymbol{\theta}_{t})|\partial_{j}\psi(\boldsymbol{\theta}_{t})\rangle\right),\end{split} (6) where |\partial_{i}\psi(\boldsymbol{\theta}_{t})\rangle=\frac{\partial|\psi(\boldsymbol{\theta}_{t})\rangle}{\partial\theta_{i}} . This in turn defines the following SLE ( SLE ) \displaystyle g(\boldsymbol{\theta}_{t})\dot{\boldsymbol{\theta}}_{t}=\boldsymbol{b}(\boldsymbol{\theta}_{t}). (7) Solving the equation above for \dot{\boldsymbol{\theta}}_{t}=\frac{\partial\boldsymbol{\theta}_{t}}{\partial_{t}} allows us to propagate the ansatz parameters using an ODE solver such that the evolution approximates the actual time evolution. The number of gradient entries scales linearly with the number of parameters N_{p} , while the number of QGT entries scales quadratically. For non-trivial system sizes, this alone can already represent a significant resource challenge. Furthermore, the underlying SLE given in Eq. 7 is typically ill-conditioned. As a consequence, small errors in the QGT can result in large errors in the parameter update. These errors, in turn, can lead to unstable and nonphysical dynamics in VarQTE 10 . Therefore, each QGT entry must be evaluated with high numerical precision. This requirement implies a large number of shots on the quantum computer. Consequently, the quadratic scaling of the QGT is widely identified in the literature as the dominant computational bottleneck in VarQTE . Achieving the necessary accuracy for an effective VarQTE implementation with these methods remains prohibitively expensive in practice. We provide an overview over the most established approximation methods in the next section and discuss their bottlenecks in more detail. III Methods Next, we discuss our framework to approach the two main bottlenecks of VarQTE : the large number of required quantum measurements and the numerical instability of the underlying SLE . More specifically, we introduce a method that, when possible, computes gradient and QGT entries exactly using classical resources. This approach improves algorithmic stability and reduces the quantum workload. III.1 Bowtie Gradient and QGT Computation In the following, we consider a variational ansatz as defined below. Definition 2 (Ansatz) . Let our ansatz be a parameterized circuits U(\boldsymbol{\theta}_{t}) of the form U(\boldsymbol{\theta})=\prod_{k=0}^{N_{p}-1}C_{k}R_{P_{k}}(\theta_{k})\,, where C_{k} are Clifford gates and R_{P_{k}}(\theta_{k})=e^{-iP_{k}\theta_{k}} , with P_{k} a Pauli operator. We initialize our time dependent parameters \boldsymbol{\theta}_{t}\in\mathbb{R}^{N_{k}} such that: U(\boldsymbol{\theta}^{0})\ket{0}^{\otimes n}=\ket{\psi(t=0)}. (8) To compute the elements in the gradient \boldsymbol{b}(\boldsymbol{\theta}_{t}) given in Eqs. 4 and 5 , as well as the QGT g(\boldsymbol{\theta}_{t}) given in Eq. 6 , we may exploit the underlying light-cone structure–see Definition 3 . In particular, we show how classical computational resources can be leveraged to evaluate these quantities precisely for systems that exhibit sufficient structure. Definition 3 (Light-cones) . Provided any fixed N_{p} -parameter circuit U(\boldsymbol{\theta}_{t}) from Definition 2 , the light-cone \Delta_{P}^{U} is defined as the number of qubits on which U^{\dagger}(\boldsymbol{\theta}_{t})PU(\boldsymbol{\theta}_{t}) acts non-trivially with respect to a Pauli observable P for any \boldsymbol{\theta}_{t}\in[-\pi,\pi]^{m} . \theta_{00} \theta_{00} \theta_{10} \theta_{10} \theta_{20} \theta_{20} \theta_{05} \theta_{05} \theta_{15} \theta_{15} \theta_{25} \theta_{25} \theta_{01} \theta_{01} \theta_{11} \theta_{11} \theta_{21} \theta_{21} \theta_{06} \theta_{06} \theta_{16} \theta_{16} \theta_{26} \theta_{26} \theta_{02} \theta_{02} \theta_{12} \theta_{12} \theta_{22} \theta_{22} \theta_{07} \theta_{07} \theta_{17} \theta_{17} \theta_{27} \theta_{27} \theta_{03} \theta_{03} \theta_{13} \theta_{13} \theta_{23} \theta_{23} \theta_{08} \theta_{08} \theta_{18} \theta_{18} \theta_{28} \theta_{28} \theta_{04} \theta_{04} \theta_{14} \theta_{14} \theta_{24} \theta_{24} \theta_{09} \theta_{09} \theta_{19} \theta_{19} \theta_{29} \theta_{29} (a) Initial circuit with the selected rotation gate R_{P}(\theta_{12})=e^{-iP\theta_{12}} . +\theta_{00} +\theta_{00} +\theta_{10} +\theta_{10} -\theta_{10} -\theta_{10} -\theta_{00} -\theta_{00} +\theta_{05} +\theta_{05} -\theta_{05} -\theta_{05} +\theta_{01} +\theta_{01} +\theta_{11} +\theta_{11} -\theta_{11} -\theta_{11} -\theta_{01} -\theta_{01} +\theta_{06} +\theta_{06} -\theta_{06} -\theta_{06} +\theta_{02} +\theta_{02} P P -\theta_{02} -\theta_{02} +\theta_{07} +\theta_{07} -\theta_{07} -\theta_{07} +\theta_{03} +\theta_{03} +\theta_{13} +\theta_{13} -\theta_{13} -\theta_{13} -\theta_{03} -\theta_{03} +\theta_{08} +\theta_{08} -\theta_{08} -\theta_{08} +\theta_{04} +\theta_{04} +\theta_{14} +\theta_{14} -\theta_{14} -\theta_{14} -\theta_{04} -\theta_{04} +\theta_{09} +\theta_{09} -\theta_{09} -\theta_{09} (b) Bowtie circuit associated with \theta_{12} . First, the gate is replaced by its Pauli generator P and then U^{\dagger} is appended. As a result, all gates outside the lightcone cancel out. As per our definition, this circuit is the bowtie B_{\beta}^{12} , where \beta indicates that it is the bowtie of a parameter and 12 is the index of such parameter. The state generated by the action of such circuit on \ket{0} would be the bowtie state \ket{\beta_{12}} . Figure 1 : Construction of a bowtie circuit for gradient extraction of a variational parameter. We can observe that the elements in \boldsymbol{b}(\boldsymbol{\theta}_{t}) and g(\boldsymbol{\theta}_{t}) are based on complex-valued inner products. These inner products are invariant under unitary transformations such that we can rewrite them as: \displaystyle\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|h_{j}|\psi(\boldsymbol{\theta}_{t})\rangle \displaystyle=\innerproduct{{\beta}_i}{{\gamma}_j}, (9) \displaystyle\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|\psi(\boldsymbol{\theta}_{t})\rangle \displaystyle=\innerproduct{{\beta}_i}{{\alpha}}, (10) \displaystyle\langle\psi(\boldsymbol{\theta}_{t})|h_{j}|\psi(\boldsymbol{\theta}_{t})\rangle \displaystyle=\innerproduct{{\alpha}}{{\gamma}_j}, (11) \displaystyle\langle\partial_{i}\psi(\boldsymbol{\theta}_{t})|\partial_{j}\psi(\boldsymbol{\theta}_{t})\rangle \displaystyle=\innerproduct{{\beta}_i}{{\beta}_j}, (12) where \displaystyle\ket{{\alpha}} \displaystyle\coloneqq U^{\dagger}\left(\boldsymbol{\theta}_{t}\right)\ket{\varpsi}=\ket{0}, (13) \displaystyle\ket{{\beta}_{i}} \displaystyle\coloneqq U^{\dagger}\left(\boldsymbol{\theta}_{t}\right)\ket{\parvarpsi{i}}=B_{\beta}^{p}\left(\boldsymbol{\theta}_{t}\right)\ket{0}, (14) \displaystyle\ket{{\gamma}_{j}} \displaystyle\coloneqq U^{\dagger}\left(\boldsymbol{\theta}_{t}\right)h_{j}\ket{\varpsi}=B_{\gamma}^{j}\left(\boldsymbol{\theta}_{t}\right)\ket{0}, (15) with B_{\beta}^{i}\left(\boldsymbol{\theta}_{t}\right)\coloneqq U^{\dagger}\left(\boldsymbol{\theta}_{t}\right)\partial_{i}U\left(\boldsymbol{\theta}_{t}\right) for i\in\left\{0,\ldots,N_{p}-1\right\} and B_{\gamma}^{j}\left(\boldsymbol{\theta}_{t}\right)\coloneqq U^{\dagger}\left(\boldsymbol{\theta}_{t}\right)h_{j}U\left(\boldsymbol{\theta}_{t}\right) for j\in\left\{0,\ldots,N_{h}-1\right\} . The state \ket{{\alpha}} is simply a product state, while \ket{{\beta}_{i}} and \ket{{\gamma}_{j}} may be simplified according to their underlying symmetric light-cone structure. For \ket{{\gamma}_{j}} it is straightforward to see that B_{\gamma}^{q}\left(\boldsymbol{\theta}_{t}\right) induces a light-cone \Delta_{h_{q}}^{U} as per Definition 3 . To find the light-cone structure underlying \ket{{\beta}_{i}} , we use the fact that the gradients of the parameterized gates within our ansatz, see Definition 2 , correspond to \frac{\partial e^{-iP\theta}}{\partial\theta}=-iPe^{-iP\theta} . Hence, we can rewrite B_{\beta}^{i}\left(\boldsymbol{\theta}_{t}\right)=W^{\dagger}V^{\dagger}VP_{i}W=W^{\dagger}P_{i}W, (16) for unitaries W and V such that the respective light-cone structure corresponds to \Delta_{P_{j}}^{W} . Inspired by the underlying structure–illustrated in Fig. 1 –we shall from now on refer to \ket{{\beta}_{i}} and \ket{{\gamma}_{j}} as bowtie states and the underlying light-cone inducing unitaries B_{\beta}^{i} and B_{\gamma}^{j} as bowties . Details on the efficient computation of the overlaps are given in Appendix B . III.2 Algorithm Algorithm 1: Bowtie- VarQTE qc: ansatz as per Definition 2 with \boldsymbol{\theta}_{t}\in\mathbb{R}^{N_{p}} H=\sum\limits^{N_{h}}_{q}c_{q}h_{q} : with c_{q}\in\mathbb{R} and h_{q} k-local Paulis \triangleright Pre-compute for i do in \{0,\ldots,N_{p}-1\} Construct B_{\beta}^{i} Store indices of qubits in \Delta_{P_{i}}^{W} for j do in \{0,\ldots,N_{h}-1\} Construct B_{\gamma}^{i} Store indices of qubits in \Delta_{h_{i}}^{U} for i do in \{0,\ldots,N_{p}-1\} for j do in \{0,\ldots,N_{p}-1\} Pre-compute \innerproduct{{\beta}_p}{{\beta}_j} contraction for j do in \{0,\ldots,N_{h}-1\} Pre-compute \innerproduct{{\beta}_p}{{\gamma}_j} contraction \triangleright Time evolution while tN_{p}}ic_{j}\,\tilde{g}_{i,j}(\boldsymbol{\theta}_{t}) (49) \displaystyle=\sum_{j>N_{p}}ic_{j}\real\!\left(\innerproduct{\beta_i}{\gamma_j}-\innerproduct{\beta_i}{\alpha}\innerproduct{\alpha}{\gamma_j}\right) (50) \displaystyle=\imaginary\!\left(\bra{\parvarpsi{i}}H\ket{\varpsi}-\bra{\parvarpsi{i}}\ket{\varpsi}E_{\boldsymbol{\theta}_{t}}\right), (51) where we have used the definitions in Eqs. Eqs. 13 , 14 and 15 . Interestingly, the lower–right block reproduces the energy variance as a quadratic form: \displaystyle\Var[H] \displaystyle=\sum_{i>N_{p}}\sum_{j>N_{p}}c_{i}c_{j}\,\tilde{g}_{i,j}(\boldsymbol{\theta}_{t}) (52) \displaystyle=\real\!\left(\bra{\varpsi}H^{2}\ket{\varpsi}-\bra{\varpsi}H\ket{\varpsi}^{2}\right). (53) Finally, combining Eqs. Eqs. 48 , 49 and 52 , the McLachlan error takes the compact form \norm{e_t}^{2}_{2}=\dot{\tilde{\boldsymbol{\theta}}}^{\mathsf{T}}\tilde{g}\dot{\tilde{\boldsymbol{\theta}}}=\Var[H]+\dot{\boldsymbol{\theta}_{t}}^{\mathsf{T}}g\dot{\boldsymbol{\theta}_{t}}-2\dot{\boldsymbol{\theta}_{t}}^{\mathsf{T}}\boldsymbol{b}. (54) This expression matches the one derived in 48 where they prove this quantity can be used to upper bound the infidelity between the target state and the variationally evolved state. The generalized QGT also enables a compact constrained formulation of McLachlan’s principle. Starting from g(\boldsymbol{\theta}_{t})\dot{\boldsymbol{\theta}}_{t}=\boldsymbol{b}(\boldsymbol{\theta}_{t}), (55) we may write \displaystyle\dot{\boldsymbol{\theta}}_{t} \displaystyle=\underset{\dot{\tilde{\boldsymbol{\theta}}}}{\argmin}\;\dot{\tilde{\boldsymbol{\theta}}}^{\mathsf{T}}\tilde{g}\dot{\tilde{\boldsymbol{\theta}}} (56) \displaystyle\text{s.t.}\quad\dot{\tilde{\theta}}_{i}=c_{i}\quad\forall i>N_{p}. (57) An equivalent penalty–based formulation is \dot{\boldsymbol{\theta}}_{t}=\underset{\dot{\tilde{\boldsymbol{\theta}}}}{\argmin}\;\Bigl[\Var[H]+\dot{\tilde{\boldsymbol{\theta}}}^{\mathsf{T}}g\dot{\tilde{\boldsymbol{\theta}}}-2\dot{\tilde{\boldsymbol{\theta}}}^{\mathsf{T}}\boldsymbol{b}+\lambda\sum_{i>N_{p}}(\dot{\tilde{\theta}}_{i}-c_{i})^{2}\Bigr]. (58) This formulation suggests possible extensions in which one allows effective Hamiltonian coefficients \boldsymbol{c}^{\prime}\approx\boldsymbol{c} to reduce the instantaneous variational error. Quantifying the potential accuracy gains of such approaches is beyond the scope of the present work.