A Generative AI-Enhanced Digital Twin Framework for Proactive Interference Management in Hybrid Near/Far-Field Wireless Systems Afan Ali, Ali Arshad Nasir, Daniel Benevides da Costa Abstract The applications of Digital Twins (DT) and Generative AI (GenAI) have demonstrated their capabilities in modeling and learning-based wireless communications. However, their joint potential for proactive wireless system design remains largely underexplored, particularly in extremely large-scale multiple-input multiple-output (XL-MIMO) networks, characterized by hybrid near-field (NF) and far-field (FF) propagation regimes. In this work, we propose an integrated GenAI-enhanced DT framework for proactive interference management in dynamic indoor scenarios. The DT constructs a high-resolution, site-specific virtual replica of the deployment environment, understanding where and why blockage occurs within a realistic 3D representation of the indoor space. Integration of the GenAI module further assists the framework in anticipating and proactively suppressing blockage, rather than reacting after the disruption occurs. Extensive simulation results based on Sionna ray-tracing datasets demonstrate that the proposed framework achieves significant improvements in interference suppression, signal-to-interference-plus-noise ratio (SINR), and outage probability compared to conventional reactive schemes and purely deterministic DT-based approaches. I Introduction Next-generation wireless networks are poised to revolutionize indoor environments through ultra-dense deployments that deliver extreme key performance indicators (KPIs), including peak data rates reaching several terabits per second (Tbps) and sub-millisecond end-to-end latency [ 1 ] . To realize these ambitious targets, operating in the millimeter-wave (mmWave) and terahertz (THz) frequency bands is essential, however, these higher frequencies exacerbate fundamental propagation challenges, such as severe path loss and high sensitivity to blockages [ 2 ] . Extremely large-scale multiple-input multiple-output (XL-MIMO) has emerged as a key enabler, yet its massive physical aperture forces many users into the near-field (NF) region. This creates a complex hybrid near/far-field environment where spherical and planar wavefronts coexist, leading to spatio-temporal, non-stationary interference that eludes conventional modeling [ 3 ] . Moreover, dense indoor environments are often affected by sudden events such as people walking around, objects blocking the signal, or groups of users gathering in the same area. These changes occur quickly and unpredictably, making the wireless environment highly dynamic. Traditional approaches have considered this as a stochastic event, with reactive response [ 4 , 5 , 6 , 7 ] . However, there is a need to predict these events in real time, so the system can prepare in advance and maintain reliable communication even in challenging indoor conditions. Digital Twins (DTs) are introduced, to effectively manage this complexity, as a powerful paradigm for real-time virtual duplication and intelligent management of wireless networks. DTs assist in forming a precise digital copies of the actual physical scenario, including XL-MIMO array, geometrical propagation, and dynamic users, which enable real-time monitoring and management of networks in realistic hybrid-field environments [ 8 ] . Recent works have demonstrated that artificial intelligence (AI)-assisted DTs can significantly improve resource allocation and network autonomy. For example, [ 9 ] proposed a DT-based framework for real-time network control, while [ 10 ] highlighted DT-enabled sustainable in-network computing. Similarly, [ 11 ] developed DT frameworks for O-RAN, and [ 12 ] explored DT-driven proactive network intelligence. However, these non-generative AI-assisted DTs remain largely reactive, relying on historical or instantaneous observations, and lack the capability to predict future network states under mobility and hybrid-field dynamics. More recently, Generative AI (GenAI) has emerged as a promising tool for learning complex data distributions and generating realistic synthetic network states. Unlike traditional discriminative AI models that primarily learn a direct mapping from inputs to outputs, GenAI models, such as, generative adversarial networks (GANs), variational autoencoders (VAEs), diffusion models, and large language models (LLMs), are capable of synthesizing novel samples, inferring missing network states, and supporting predictive decision-making [ 13 , 14 , 15 , 16 ] . In wireless networks, recent studies have explored GenAI for channel modeling, resource allocation, network optimization, and intelligent management [ 17 , 18 , 19 ] . However, most of these efforts treat GenAI as an isolated learning module rather than as part of a continuously synchronized physical-virtual network ecosystem. Consequently, the full potential of integrating GenAI with DTs remains underexplored, particularly for proactive interference management in dynamic hybrid-near/far field XL-MIMO environments, where future channel states, blockage conditions, and user mobility must be jointly predicted and acted upon in real-time. TABLE I : Comparison of the proposed GenAI-enhanced DT framework with existing works Literature Far-field (FF) Near-field (NF) Hybrid (FF+NF) Interference suppression [ 20 , 21 , 22 , 23 , 24 , 25 , 8 , 26 , 27 , 28 , 29 , 30 ] \checkmark - - - [ 31 ] \checkmark \checkmark - - [ 32 , 33 , 34 ] \checkmark - - \checkmark Our work \checkmark \checkmark \checkmark \checkmark I-A Related Works I-A 1 The Need for Precise Digital Replication The deployment of XL-MIMO systems has necessitated a shift from conventional planar wavefront assumptions to more complex hybrid-field modeling. Recent literature has extensively explored NF beam focusing, spatial non-stationarity, and both static and dynamic channel characterization, where distance-dependent phase variations play a critical role [ 35 , 36 , 37 ] . In addition, unified hybrid-field models have been proposed to handle the coexistence of NF and FF users [ 3 , 38 , 39 , 40 , 41 ] . However, these approaches largely remain limited to analytical modeling or scenario-specific simulations and do not fully capture the evolving interaction between user mobility, environmental dynamics, and interference. In contrast, DT frameworks enable a physics-consistent and geometry-aware representation of the wireless environment, allowing continuous tracking and prediction of channel and interference variations in a spatio-temporally consistent manner. This capability makes DTs particularly well-suited for modeling interference as a spatially heterogeneous process in dense deployments. I-A 2 From Static Mitigation to DT-Enabled Interference Management Traditional interference management in mmWave and THz networks based on beamforming and scheduling was studied under FF assumptions [ 42 , 43 ] . Although recent studies have begun to incorporate spherical wavefront dynamics to mitigate NF coupling [ 3 ] , these solutions remain largely instantaneous. By integrating DT technology, the network can move beyond simple beam-alignment to site-specific interference coordination. Existing DT frameworks have demonstrated success in reducing reliance on real-world datasets through synthetic ray tracing [ 8 , 44 ] ; however, they remain inherently reactive. These models replicate the current state but struggle to model the spatio-temporal evolution of interference driven by user mobility and hybrid-field transitions. I-A 3 The Synergy of GenAI and DTs for Interference Management GenAI has recently been introduced to enhance DT capabilities by enabling data-driven modeling and synthetic data generation. Recent works [ 21 , 45 , 25 ] leverage generative models, including GANs and diffusion models, to learn complex channel distributions and generate realistic radio frequency (RF) datasets. Similarly, [ 23 , 22 ] provide comprehensive overviews of GenAI-enabled DT architectures for next-generation networks. Despite these advances, prior studies have mostly examined DTs, GenAI, and interference suppression in hybrid-field separately rather than in an integrated manner. Current DT frameworks focus on environment replication, while GenAI applications are often restricted to general channel synthesis or data augmentation. To the best of our knowledge, this is the first work to propose a fully integrated framework that leverages GenAI-enhanced DTs specifically for interference suppression in hybrid-field systems. Table I shows the comparison between our proposed framework with some existing works. I-B Motivation and Contributions The main contributions of this work are summarized as follows: • We present a novel framework that integrates GenAI and DTs to capture the transition from the FF to NF region in XL-MIMO configuration. While most existing works have modeled interference as a static phenomenon, the proposed framework addresses this problem through an evolving, spatio-temporal model of interference. By utilizing site-specific ray-tracing information inside the DT, the GenAI block helps to generate and forecast future interference patterns, shifting the network from reactive to proactive monitoring. • Existing work treats user blockage link with transmitter as a random event. In this work, we transform it into a generative parameter, in which DT provides a detailed map of the environment, and the GenAI model combines this with predicted user movement to estimate future blockage conditions. Therefore, our work is a first attempt to integrate GenAI and DTs to anticipate when and where signals will be blocked in a dense indoor network, rather than reacting after the disruption occurs. • By leveraging the accurate state generation of a GenAI-enhanced DT, we develop a unified closed-loop framework that adaptively governs beamforming across hybrid NF and FF regimes. Rather than proposing a new beamforming algorithm, our contribution lies in integrating DT-based environment replication with GenAI-driven prediction to anticipate future network states and continuously update beamforming and interference management. • We conduct extensive simulations using Sionna ray-tracing to build indoor dense environment DT which validate the proposed GenAI-enhanced DT framework. The proposed method is compared with representative benchmarks, including FF reactive ZF [ 6 ] , reactive hybrid-field beamforming [ 7 ] , deterministic non-generative DT prediction [ 46 ] , and regime-unaware GenAI-enhanced DT prediction [ 47 ] . The results demonstrate clear gains in interference reduction, signal-to-interference-plus-noise ratio (SINR) improvement, outage probability, and prediction root-mean-square-error (RMSE). The remainder of this paper is organized as follows. Section II presents the system model. Section III formulates the problem for this work and the preliminary solution framework. Section IV details the proposed GenAI-enhanced DT framework. Section V provides performance evaluation, along with insightful discussions, and Section VI concludes the paper. (a) An illustration of dense indoor wireless communication environment. (b) System layout of near-field MISO system with UPA. Fig. 1 : Overall System Model illustration. II System Model We consider a high-fidelity DT framework for a dense indoor wireless environment, as illustrated in Fig. 1(a) . The DT maintains a real-time virtual replica of the physical world, capturing site-specific geometries and electromagnetic (EM) properties to provide a structured training ground for GenAI. Fig. 1(b) depicts a zoomed in illustration of a specific link between uniform planar array (UPA) and user equipment (UE). Table II summarizes the main notation used throughout this paper. II-A DT-Assisted Topology and Predictive Mobility The DT tracks a set of transmitters \mathcal{K}=\{0,1,\ldots,K\} , where k=0 is the serving access point (AP), \mathcal{U} represents UE’s service region and \mathcal{K}_{I}=\{1,\ldots,K\} represents the interferers. By integrating a site-specific ray-tracing engine, the DT maintains the UE’s trajectory, {\bf u}(t)\in\mathbb{R}^{3} , and determines the distance to each transmitter k at position {\bf p}_{k} as d_{k}({\bf u}(t))=\|{\bf u}(t)-{\bf p}_{k}\|_{2}, (1) Unlike traditional stochastic models, the GenAI module leverages the DT’s 3D environmental map to predict the future state {\bf u}(t+\tau) . By processing the sequence of past positions \mathcal{U}_{hist}=\{{\bf u}(t-nT),\dots,{\bf u}(t)\} , the GenAI anticipates how the UE will evolve relative to physical boundaries, enabling the network to prepare for regime transitions before they occur in the physical layer. II-B GenAI-Enhanced Hybrid-Field Modeling The extremely large physical aperture of XL-MIMO arrays results in a significant Rayleigh distance defined as R_{k}=\frac{2D_{k}^{2}}{\lambda}, (2) where \lambda denotes the carrier wavelength and D_{k} is the aperture size of transmitter k . Accordingly, the DT dynamically classifies each link into NF or FF regimes as k\in\begin{cases}\mathcal{K}_{\mathrm{N}}(\mathbf{u}(t)),&d_{k}(\mathbf{u}(t))\leq R_{k},\\ \mathcal{K}_{\mathrm{F}}(\mathbf{u}(t)),&d_{k}(\mathbf{u}(t))>R_{k},\end{cases} (3) where \mathcal{K}_{\mathrm{N}}(\mathbf{u}(t)) and \mathcal{K}_{\mathrm{F}}(\mathbf{u}(t)) denote the sets of NF and FF transmitters, respectively. TABLE II : Summary of Notation Symbol Description \mathcal{K} Set of all transmitters \mathcal{K}_{I} Interfering transmitters \mathcal{K}_{\mathrm{N}}(\mathbf{u}(t)) Near-field transmitters \mathcal{K}_{\mathrm{F}}(\mathbf{u}(t)) Far-field transmitters k,m,l Transmitter, antenna, path indices M_{k} Antennas at transmitter k L Number of propagation paths \mathbf{u}(t) UE position at time t \mathbf{p}_{k} , \mathbf{p}_{k,m} Transmitter and antenna element positions \tilde{\mathbf{p}}_{k,l} Position of l -th scatterer d_{k}(\mathbf{u}(t)) Distance UE to transmitter k d_{k,l}[m](t) Path distance to m -th element R_{k} Rayleigh distance \mathbf{h}_{k}(\mathbf{u}(t),t) Channel vector from transmitter k \mathbf{h}_{k,\mathrm{DT}}(\mathbf{u}(t),t) DT-synthesized channel \hat{\mathbf{h}}_{k}(t+\tau) GenAI-predicted channel \hat{\mathcal{H}}^{(m)} m -th synthesized channel trajectory \mathbf{H}_{t-T_{h}:t}^{\mathrm{hist}} Historical channel observations \hat{\mathbf{h}}^{\mathrm{eff}}_{k}(t+\tau) Effective predicted channel \mathbf{w}_{k} Beamforming vector \{\mathbf{w}_{k}^{\mathrm{pro}}\} Proactive beamforming vectors P_{k} , P_{\rm total} Transmit and total power \lambda Carrier wavelength \beta_{k} , \Lambda_{k} Large-scale fading and path loss \xi_{k}(t) , \hat{\xi}_{k}(t+\tau) Blockage indicator ( \in\{1,\eta\} ) \rho_{k}(t) Regime indicator ( \in\{0,1\} ) c(t) GenAI conditioning context \mathbf{X}_{d}^{\mathrm{DT}} , \mathbf{Y}_{d}^{\mathrm{DT}} DT input/output samples \widetilde{\mathcal{D}}_{\mathrm{DT}} DT-generated dataset \hat{\mathcal{Y}}(t) GenAI-generated trajectory set \mathcal{L}_{\mathrm{GenAI}} Total GenAI loss \mathcal{L}_{\mathrm{adv}} , \mathcal{L}_{\mathrm{pred}} Adversarial and prediction losses I(t) , \hat{I}(t+\tau) Aggregate interference \gamma(t) , \hat{\gamma}(t+\tau) SINR (instantaneous / predicted) G_{\rm DT} DT environment model \mathcal{U}_{\rm hist} Historical UE trajectory T , \Delta t Prediction horizon and time step II-B 1 DT-Driven Predictive Blockage and Path Loss In the considered dense indoor environment, the large-scale fading coefficient of the k -th link can be modeled as \beta_{k}(\mathbf{u}(t),t)=\xi_{k}(t)\Lambda_{k}(\mathbf{u}(t),t), (4) where \xi_{k}(t)\in\{1,\eta\} denotes the blockage indicator, \eta\ll 1 represents the attenuation factor during severe blockage, \Lambda_{k}(\mathbf{u}(t),t) denotes the large-scale path-loss component. The distance-dependent path loss can be expressed as \Lambda_{k}(\mathbf{u}(t),t)=C_{0}\left(\frac{d_{k}(\mathbf{u}(t))}{d_{\mathrm{ref}}}\right)^{-\alpha}, (5) where C_{0} is the reference path-loss constant, d_{\mathrm{ref}} is the reference distance, and \alpha denotes the path-loss exponent. Conventional wireless models typically treat the blockage process \xi_{k}(t) as a random stochastic variable. In contrast, the proposed DT-assisted GenAI framework transforms blockage into a geometry-aware predictive quantity. Since the DT maintains the exact 3D coordinates and EM properties of the indoor environment, the GenAI module can infer future blockage events by analyzing the predicted interaction between the UE trajectory and surrounding obstacles. Consequently, the predicted future channel at time t+\tau can be expressed as \hat{\mathbf{h}}_{k}(t+\tau)=\sqrt{\hat{\beta}_{k}(t+\tau)}\hat{\mathbf{g}}_{k}(t+\tau), (6) in which \hat{\mathbf{g}}_{k}(t+\tau) denotes the predicted small-scale hybrid-field channel and \hat{\beta}_{k}(t+\tau) denotes the predicted large-scale fading coefficient. The predicted large-scale fading coefficient can be given as \hat{\beta}_{k}(t+\tau)=\hat{\xi}_{k}(t+\tau)\hat{\Lambda}_{k}(\mathbf{u}(t+\tau),t+\tau), (7) in which \hat{\xi}_{k}(t+\tau) is the predicted blockage indicator, \hat{\Lambda}_{k}(\mathbf{u}(t+\tau),t+\tau) is the predicted path loss. Unlike the previous formulation where GenAI only predicted blockage, the proposed framework jointly predicts as follows \left(\hat{\mathbf{h}}_{k}(t+\tau),\hat{\Lambda}_{k}(t+\tau),\hat{\xi}_{k}(t+\tau)\right), (8) thereby enabling geometry-aware prediction of future propagation conditions. The GenAI mapping can be formulated as f_{\mathrm{GenAI}}:(\mathcal{U}_{\mathrm{hist}},\mathcal{G}_{\mathrm{DT}})\mapsto\left(\hat{\mathbf{h}}_{k}(t+\tau),\hat{\Lambda}_{k}(t+\tau),\hat{\xi}_{k}(t+\tau)\right), (9) where \mathcal{G}_{\mathrm{DT}} denotes the DT-side environment representation containing the 3D geometry and EM characteristics of all physical obstacles, \mathcal{U}_{\mathrm{hist}} denotes the historical mobility trajectory. From a probabilistic perspective, the blockage prediction can be interpreted as \hat{\xi}_{k}(t+\tau)\approx\mathbb{E}\left[\xi_{k}(t+\tau)\mid\mathcal{U}_{\mathrm{hist}},\mathcal{G}_{\mathrm{DT}}\right], (10) Similarly, the predicted path loss can be interpreted as \hat{\Lambda}_{k}(t+\tau)\approx\mathbb{E}\left[\Lambda_{k}(t+\tau)\mid\mathcal{U}_{\mathrm{hist}},\mathcal{G}_{\mathrm{DT}}\right], (11) II-B 2 Near-Field Multi-Path Synthesis For users in the NF regime ( k\in\mathcal{K}_{\mathrm{N}} ), the channel incorporates spherical-wave propagation and spatial non-stationarity [ 40 ] . The DT provides the coordinates of scatterers, \tilde{\mathbf{p}}_{k,l} , obtained via ray tracing. The NF channel vector for M_{k} antenna elements can be expressed as \displaystyle\mathbf{h}_{k}(\mathbf{u}(t),t) \displaystyle=\sum_{l=0}^{L-1}\sqrt{\beta^{\mathrm{(PD)}}_{k,l}(\mathbf{u}(t))} \displaystyle\quad\times\left[e^{-j\frac{2\pi}{\lambda}d_{k,l}[1](t)},\ldots,e^{-j\frac{2\pi}{\lambda}d_{k,l}[M_{k}](t)}\right]^{T}, (12) where l=0 corresponds to the LoS component, l\geq 1 corresponds to the NLoS components and d_{k,l}[m](t) denotes the exact propagation distance to the m -th antenna element. Unlike conventional planar-wave models, the considered NF multipath channel explicitly follows the product-distance propagation law described in [ 40 ] . Therefore, the total NF channel can be decomposed into LoS and NLoS components as \mathbf{h}_{k}(\mathbf{u}(t),t)=\mathbf{h}_{k}^{\mathrm{LoS}}(t)+\mathbf{h}_{k}^{\mathrm{NLoS}}(t), (13) The LoS component is given by \mathbf{h}_{k}^{\mathrm{LoS}}(t)=\sqrt{\beta_{k,0}^{\mathrm{LoS}}(t)}\left[e^{-j\frac{2\pi}{\lambda}d_{k,0}[1](t)},\ldots,e^{-j\frac{2\pi}{\lambda}d_{k,0}[M_{k}](t)}\right]^{T}, (14) where \beta_{k,0}^{\mathrm{LoS}}(t)=\left(\frac{\lambda}{4\pi d_{k}(\mathbf{u}(t))}\right)^{2}, (15) For the NLoS component, each reflected path is modeled as a cascaded BS-to-scatterer-to-UE propagation process as [ 40 ] \mathbf{h}_{k,l}^{\mathrm{NLoS}}(t)=\alpha_{k,l}(t)\mathbf{h}_{\mathrm{BS}}\left(r_{k,l}^{\mathrm{BS}}(t)\right)h_{\mathrm{UE}}\left(r_{k,l}^{\mathrm{UE}}(t)\right),\quad l\geq 1. (16) where \alpha_{k,l}(t) is the complex reflection coefficient, r_{k,l}^{\mathrm{BS}}(t) is the BS-to-scatterer distance, and r_{k,l}^{\mathrm{UE}}(t) is the scatterer-to-UE distance. The total NLoS channel can be written as \mathbf{h}_{k}^{\mathrm{NLoS}}(t)=\sum_{l=1}^{L-1}\mathbf{h}_{k,l}^{\mathrm{NLoS}}(t), (17) The path-wise NLoS attenuation can be defined as \Lambda_{k,l}^{\mathrm{NLoS}}(t)=\frac{\lambda^{2}|\alpha_{k,l}(t)|^{2}}{(4\pi)^{2}r_{k,l}^{\mathrm{BS}}(t)r_{k,l}^{\mathrm{UE}}(t)}, (18) Accordingly, the total NLoS path-loss contribution can be written as \Lambda_{k}^{\mathrm{NLoS}}(t)=\sum_{l=1}^{L-1}\Lambda_{k,l}^{\mathrm{NLoS}}(t), (19) and the total large-scale path-loss contribution becomes \Lambda_{k}(t)=\beta_{k,0}^{\mathrm{LoS}}(t)+\Lambda_{k}^{\mathrm{NLoS}}(t), (20) The LoS path gain is represented using the conventional free-space attenuation, whereas the NLoS components follow the cascaded product-distance formulation in ( 16 ). Moreover, recent GenAI-enabled XL-MIMO channel estimation works demonstrate that generative models can effectively learn high-dimensional NF channel distributions while preserving geometry-aware propagation characteristics [ 31 ] . Therefore, in the proposed framework, GenAI predicts future geometry-dependent states, while the final channel synthesis remains constrained by the DT-assisted product-distance NF model. In the proactive DT-GenAI framework, the future NF channel can be predicted at time t+\tau as \displaystyle\hat{\mathbf{h}}_{k}(t+\tau) \displaystyle=\sum_{l=0}^{L-1}\sqrt{\hat{\beta}^{\mathrm{(PD)}}_{k,l}(t+\tau)} \displaystyle\quad\times\left[e^{-j\frac{2\pi}{\lambda}\hat{d}_{k,l}[1](t+\tau)},\ldots,e^{-j\frac{2\pi}{\lambda}\hat{d}_{k,l}[M_{k}](t+\tau)}\right]^{T}, (21) where \hat{d}_{k,l}[m](t+\tau) denotes the predicted path distance and \hat{\beta}^{\mathrm{(PD)}}_{k,l}(t+\tau) denotes the predicted product-distance path gain. The predicted path gain is computed from predicted UE trajectory, DT-side scatterer geometry and product-distance propagation law. Thus, the predicted effective channel can be defined as \hat{\mathbf{h}}_{k}^{\mathrm{eff}}(t+\tau)=\sqrt{\hat{\Lambda}_{k}(t+\tau)\hat{\xi}_{k}(t+\tau)}\hat{\mathbf{h}}_{k}(t+\tau), (22) where \hat{\mathbf{h}}_{k}(t+\tau) captures the NF spatial structure, \hat{\Lambda}_{k}(t+\tau) captures path loss, \hat{\xi}_{k}(t+\tau) captures blockage attenuation. The effective channel in ( 22 ) is subsequently used for interference evaluation and beamforming optimization. II-C Proactive Signal and Interference Model The received signal at the UE can be expressed as y(t)=\underbrace{\mathbf{h}_{0}^{H}(\mathbf{u}(t),t)\mathbf{w}_{0}s_{0}(t)}_{\text{Desired signal}}+\underbrace{\sum_{k\in\mathcal{K}_{I}}\mathbf{h}_{k}^{H}(\mathbf{u}(t),t)\mathbf{w}_{k}s_{k}(t)}_{\text{Interference}}+\underbrace{n(t)}_{\text{Noise}}, (23) where \mathbf{w}_{k} denotes the beamforming vector, s_{k}(t) denotes the transmitted signal, n(t)\sim\mathcal{CN}(0,\sigma^{2}) is AWGN. Considering a pedestrian UE with speed v\approx 1 m/s and carrier frequency f_{c}=100 GHz, the maximum Doppler shift can be written as f_{d}=\frac{vf_{c}}{c}\approx 333.3~\mathrm{Hz}. (24) which yields a coherence time of approximately T_{c}\approx\frac{0.423}{f_{d}}\approx 1.27~\mathrm{ms}. (25) Therefore, the proposed framework performs proactive beamforming within the coherence interval. Specifically, the DT and GenAI modules utilize the current network state at time t to predict the future effective channel at time t+\tau , where 0<\tau0 balances channel prediction accuracy and interference fidelity. \displaystyle\mathcal{L}_{\mathrm{pred}}=\sum_{\tau=1}^{T}\left(\sum_{k\in\mathcal{K}}\left\|\hat{\bf h}_{k}(t+\tau)-{\bf h}_{k,\mathrm{DT}}(t+\tau)\right\|_{2}^{2}+\mu\left|\hat{I}(t+\tau)-I_{\mathrm{DT}}(t+\tau)\right|^{2}\right), (45) The overall training objective can be then given as \mathcal{L}_{\mathrm{GenAI}}=\mathcal{L}_{\mathrm{adv}}+\lambda_{\mathrm{pred}}\mathcal{L}_{\mathrm{pred}}, (46) where \lambda_{\mathrm{pred}} is a regularization weight, and I_{\mathrm{DT}}(t+\tau) denotes the interference computed using DT-synthesized channels. This composite loss ensures that the generator synthesizes trajectories that are both statistically realistic and physically grounded in the DT’s geometric substrate. By leveraging the stochastic generation capability of the cGAN, the framework produces diverse future trajectories, enabling the proactive optimizer to mitigate non-linear interference surges before they manifest. Algorithm 2 details the stochastic generation process for real-time interference management. Algorithm 2 GenAI-Based Future Trajectory 1: Input: {\bf X}^{\mathrm{DT}}(t) , G(\cdot) , M , T 2: Output: \bigl\{\hat{\mathcal{Y}}^{(m)}(t)\bigr\}_{m=1}^{M} 3: Extract {\bf c}(t) from {\bf X}^{\mathrm{DT}}(t) using ( 41 ) 4: for m=1 to M do 5: Sample {\bf z}^{(m)}\sim p_{\bf z} 6: Generate future states using ( 42 ) 7: Obtain \left\{\hat{\mathbf{h}}_{k}^{(m)}(t+\tau),\hat{\Lambda}_{k}^{(m)}(t+\tau),\hat{\xi}_{k}^{(m)}(t+\tau)\right\}_{k\in\mathcal{K},\,\tau=1}^{T} using ( 9 ) 8: Form \left\{\hat{\mathbf{h}}_{k}^{(m),\mathrm{eff}}(t+\tau)\right\}_{k\in\mathcal{K},\,\tau=1}^{T} using ( 22 ) 9: Compute ( 48 ) 10: Compute ( 28 ) 11: end for 12: Return \bigl\{\hat{\mathcal{Y}}^{(m)}(t)\bigr\}_{m=1}^{M} to the proactive optimizer Algorithm 3 Proactive Interference Optimization 1: Input: \{\hat{\mathcal{Y}}^{(m)}(t)\}_{m=1}^{M} , \{\rho_{k}(t)\}_{k\in\mathcal{K}} , power constraint, \gamma_{\min} 2: Output: \{{\bf w}_{k}^{\mathrm{pro}}\}_{k\in\mathcal{K}} 3: Initialize \{{\bf w}_{k}^{(0)}\} based on propagation regimes 4: for each link k\in\mathcal{K} do 5: if \rho_{k}(t)=0 then 6: Initialize {\bf w}_{k}^{(0)} using FF beamforming from [ 6 ] 7: else 8: Initialize {\bf w}_{k}^{(0)} [ 54 ] 9: end if 10: end for 11: repeat 12: Compute ( 48 ) 13: Update \{{\bf w}_{k}\} by minimizing ( 49a ) 14: Enforce SINR constraints in ( 49b ) (if required) 15: until convergence or maximum iterations reached 16: Set \{{\bf w}_{k}^{\mathrm{pro}}\}\leftarrow\{{\bf w}_{k}\} 17: Deploy \{{\bf w}_{k}^{\mathrm{pro}}\} in the physical network 18: Update DT and GenAI modules IV-F Proactive Interference-Aware Optimization The objective of the proposed framework is to move beyond reactive interference mitigation by leveraging the synthesized spatio-temporal dynamics provided by the GenAI-DT engine. By anticipating the non-stationary transitions of the hybrid-field environment, the network can proactively optimize beamforming vectors. The GenAI module generates a set of M independent stochastic realizations by sampling the latent variable {\bf z} , where M denotes the number of sampled future trajectories. The m -th synthesized channel trajectory can be defined as \hat{\mathcal{H}}^{(m)}=\left\{\hat{\bf h}_{k}^{(m)}(t+\tau)\right\}_{k\in\mathcal{K},\,\tau=1}^{T}, (47) where \hat{\mathcal{H}}^{(m)} corresponds to the channel component of the m -th synthesized future trajectory, and m\in\{1,\ldots,M\} indexes the possible future states. Based on these realizations, the predicted aggregate interference at time t+\tau for a given beamforming policy \{{\bf w}_{k}\} can be expressed as \hat{I}^{(m)}(t+\tau)=\sum_{k\in\mathcal{K}_{I}}P_{k}\left|\left(\hat{\mathbf{h}}_{k}^{(m),\mathrm{eff}}(t+\tau)\right)^{H}\mathbf{w}_{k}\right|^{2}, (48) To ensure robustness against the multi-modal uncertainty induced by user mobility and blockage, the proactive beamforming design can be formulated as the minimization of the expected cumulative interference across all synthesized futures as \displaystyle\min_{\{{\bf w}_{k}\}}\quad \displaystyle\frac{1}{M}\sum_{m=1}^{M}\sum_{\tau=1}^{T}\hat{I}^{(m)}(t+\tau), (49a) s.t. \displaystyle\frac{P_{0}\left|\left(\hat{\bf h}_{0}^{(m),\mathrm{eff}}(t+\tau)\right)^{H}{\bf w}_{0}\right|^{2}}{\hat{I}^{(m)}(t+\tau)+\sigma^{2}}\geq\gamma_{\min},\quad\forall\tau,m. (49b) \displaystyle\sum_{k\in\mathcal{K}}P_{k}\|{\bf w}_{k}\|^{2}\leq P_{\mathrm{total}}, (49c) where M denotes the number of sampled future realizations. The use of the effective channel \hat{\bf h}_{k}^{(m),\mathrm{eff}}(t+\tau) in ( 49b ) ensures consistency with the system-level propagation model, incorporating large-scale attenuation, blockage, and hybrid-field effects. Optimization in ( 49a )–( 49b ) constitutes a robust proactive paradigm. By averaging over M synthesized trajectories, the resulting beamforming vectors \{\mathbf{w}_{k}\} are not optimized for a single predicted future, but are regularized against rare yet critical events, such as abrupt user movements or dynamic blockages captured by the GenAI model. As detailed in Algorithm 3 , the proposed framework provides a regime-aware solution with computational complexity scaling on the order of \mathcal{O}(MT|\mathcal{K}|) per iteration, enabling millisecond-level responsiveness within the coherence interval of 1.27 ms. IV-G Regime-Aware Precoding Strategy The optimization problem in ( 49a ) is solved in a regime-dependent manner using the regime indicator \rho_{k}(t) as follows: • Far-field regime ( \rho_{k}(t)=0 ): Conventional angular-domain beamforming techniques, such as zero-forcing (ZF) precoding, are employed based on the predicted channel matrix [ 6 ] . • Near-field regime ( \rho_{k}(t)=1 ): Location-aware beamforming is adopted using the spherical-wave channel model, enabling spatial energy focusing at the intended UE positions [ 54 ] . • Hybrid regime: Users are partitioned into subsets according to \{\rho_{k}(t)\}_{k\in\mathcal{K}} , and a joint optimization is performed to mitigate inter-regime interference while satisfying individual link requirements. IV-G 1 Robust Proactive Solution The final beamforming vectors \{{\bf w}_{k}^{\mathrm{pro}}\} are obtained by solving the constrained optimization problem in ( 49a )–( 49b ). The predicted channels \hat{\mathbf{h}}_{k}^{(m)}(t+\tau) implicitly capture the UE trajectory evolution, which is estimated by the GenAI module based on historical observations and DT geometry. Therefore, explicit knowledge of future UE positions is not required. This formulation seeks beamforming strategies that remain robust under uncertainty in predicted future conditions over the coherence interval. Unlike conventional approaches that optimize based only on instantaneous channel state information, the proposed framework anticipates future interference dynamics and proactively mitigates their impact before they occur.. V Simulation Setup and Results This section evaluates the performance of the proposed GenAI-enhanced DT framework for proactive interference management in dense indoor XL-MIMO systems. We first describe the simulation scenario and then compare the proposed proactive scheme against conventional reactive baselines under various mobility and interference conditions. V-A Simulation Scenario TABLE III : Simulation Parameters Parameter Value Carrier frequency f_{c} 100 GHz (D-band) Bandwidth 400 MHz Number of antennas ( N=N_{x}\times N_{y} ) 16\times 16=256 Array geometry Uniform Planar Array (UPA) Number of users K 2 – 12 [ 55 ] Channel coherence time T_{c} \approx 1 ms Prediction time step \Delta t 1 ms Prediction horizon T 5 steps =5 ms Number of trajectories M 10 Maximum UE speed v_{\max} 1 m/s Noise power \sigma^{2} -80 dBm Transmit power P_{k} 0 dBm (normalized) SINR threshold \gamma_{\min} 5 dB Blockage factor \eta 0.01 [ 56 ] Hotspot intensity \lambda_{c} 3 users/cluster [ 57 ] Simulation duration T_{\mathrm{sim}} 100 steps =100 ms The simulation parameters are summarized in Table III . V-B Performance Metrics The proposed framework is evaluated using both communication and prediction-oriented metrics. Communication performance is quantified using SINR and outage probability, while proactive interference mitigation is assessed using the interference reduction gain. In addition, the accuracy and robustness of the GenAI-based prediction are evaluated using the RMSE. Table IV summarizes the performance metrics used in simulations. TABLE IV : Performance Metrics Metric Expression Description \bar{I} \frac{1}{T_{\mathrm{sim}}}\sum_{t}I(t) Avg. interference power SINR \gamma_{0}(t) \frac{P_{0}|({\mathbf{h}}^{\mathrm{eff}}_{0})^{H}{\mathbf{w}}_{0}|^{2}}{I(t)+\sigma^{2}} Link reliability \mathrm{RMSE}_{I} \sqrt{\frac{1}{T_{\mathrm{sim}}}\sum_{t}(\hat{I}(t)-I(t))^{2}} Prediction error Outage P_{\mathrm{out}} \frac{1}{T_{\mathrm{sim}}}\sum_{t}\mathbb{I}(\gamma_{0}(t)<\gamma_{\min}) QoS violation R_{\min} \min_{k\in\mathcal{K}}\log_{2}(1+\gamma_{k}) Minimum user-rate achieved V-C Benchmark Schemes To evaluate the effectiveness of the proposed GenAI-enhanced DT framework, we compare it against the following benchmark schemes, which progressively remove key components of the proposed design: 1. FF Reactive ZF [ 6 ] : A conventional reactive beamforming scheme that computes ZF precoders using only the instantaneous channel state information (CSI) at time t . This benchmark assumes FF propagation and does not exploit prediction or DT assistance. 2. Reactive Hybrid-Field (Regime-Aware) [ 7 ] : A regime-aware reactive baseline where FF users are served using ZF precoding and NF users are served using beam focusing. This scheme isolates the gain of proactive prediction from hybrid-field awareness and serves to act as benchmark for both NFs and FFs. 3. Deterministic DT Baseline (Non-Generative DT) [ 46 ] : A predictive baseline that uses the DT to generate a single deterministic future trajectory based on the estimated UE motion and the environment evolution. The beamforming design is optimized using this single predicted trajectory without stochastic sampling. This benchmark represents classical DT-based prediction without generative modeling. 4. GenAI-enhanced DT Regime-Unaware [ 47 ] : A proactive benchmark that uses the cGAN-generated trajectories but applies a unified beamforming design without distinguishing between NF and FF users. 5. Proposed GenAI-enhanced DT Framework (Regime-Aware): The proposed methodology combines DT-assisted environmental modeling for the particular areas, stochastic trajectory generation using cGAN, and regime-wise optimization within a time-bound window. V-D Numerical Results and Analysis (a) Avg. interference power versus time. (b) Avg. interference power versus users. (c) CDF of achievable SINR. Fig. 3 : Overall interference power comparison for proposed framework with baselines techniques. Fig. 3(a) demonstrates the average interference power over time, where t is the time in milliseconds with a resolution of \Delta t=1 ms, T_{c}\approx 1.27 ms, ensuring that the channel can be considered quasi-static within each time step while still capturing its temporal variations across steps. As can be observed from Fig. 3(a) , all the benchmark schemes show interference variance because of time-varying transmission conditions, including sudden interference increases. It can be noted that the interference spikes indicate the occurrence of abrupt changes in the environment. Reactive schemes, especially ZF, experience significant interference spikes due to the use of instantaneous CSI values and inability to foresee future channels. The interference suppression for the reactive hybrid scheme is better due to taking into account regime-aware information, yet it suffers from sharp degradation. In contrast, the proposed GenAI-enhanced DT framework shows a rapid decrease of interference values when the dynamic environment occurs. As seen from Fig. 3(a) , the proposed algorithm, using the combination of stochastic trajectories and proactive techniques, provides lower interference levels in comparison with its regime-unaware counterparts, as well as deterministic DT. Fig. 3(b) presents the variation of the average interference power with respect to the number of users K . The interference level rises for all the schemes increases as K rises, due to the rise in multiuser interference and spatial contention caused by the higher density of active users. Reactive FF ZF yields the highest interference levels, followed by rapid degradation, whereas the reactive hybrid scheme and the DT-based scheme offer a moderate improvement in terms of interference mitigation. However, the proposed framework yields lower interference levels compared to the rest of the schemes regardless of the user number K , which shows its advantage in terms of scalability in the presence of a crowded user environment and proactive prediction. Furthermore, the performance gain of the proposed scheme over the GenAI-based scheme without regime awareness becomes more evident with rising K , indicating the significance of hybrid NF and FF adaptation. (a) Outage probability versus SINR. (b) RMSE for interference prediction. (c) Worst-case user rate comparison. Fig. 4 : Overall communication comparison for proposed framework with baseline techniques. Fig. 3(c) illustrates the cumulative distribution function (CDF) of the achievable SINR for different beamforming approaches. The SINR CDF is obtained by aggregating SINR samples across all users, time steps, and trajectory realizations, with the number of users varying between K=2 and K=12 . It can be observed that CDFs with more rightward shift indicate improved SINR performance due to a greater number of successful links having high SINR levels. The dotted line denoted by \gamma_{\min}=5 dB is the required threshold used to evaluate the outage behavior. The proposed GenAI-enhanced DT regime-aware framework has obtained the best SINR distribution with the rightmost curve compared to all other approaches. Thus, we can conclude that the suggested solution offers enhanced link quality with a lower probability of functioning below the SINR threshold. The regime-unaware GenAI-DT approach performs well compared to DT and reactive techniques. However, this method cannot outperform the proposed approach in terms of SINR performance. Meanwhile, the reactive FF ZF algorithm and the reactive NF beamforming strategy have resulted in the worst SINR distributions due to the lack of predictive capabilities. Fig. 4(a) depicts the outage probability as a function of the SINR threshold \gamma_{\min} . This result is directly linked to the SINR CDF in Fig. 3(c) , since the outage probability is obtained from the CDF value at the required SINR threshold, i.e., P_{\mathrm{out}}=\Pr(\gamma_{0}<\gamma_{\min}) . Therefore, methods whose CDF curves are shifted further to the right naturally produce lower outage probability. As expected, the outage probability increases as \gamma_{\min} becomes larger, since a stricter SINR requirement makes it more difficult for links to satisfy the Quality of service (QoS) constraint. The reactive FF ZF and reactive hybrid methods show the highest outage values, which is consistent with their left-shifted CDF curves in Fig. 3(c) . In contrast, the proposed regime-aware GenAI-enhanced DT framework achieves the lowest outage probability across all SINR thresholds. At the operating threshold \gamma_{\min}=5 dB, the proposed method provides the smallest probability of QoS violation, confirming its ability to maintain more reliable links under dynamic blockage, mobility, and interference conditions. Fig. 4(b) demonstrates the impact on the evolution of the interference prediction root-mean-square-error (RMSE) as function of prediction horizon, which represents how far into the future the interference is predicted. It is evident that the error increases due to rising uncertainty in channel dynamics and movements of UEs. However, the deterministic DT baseline has the highest RMSE values, as this model is unable to consider stochastic variations. The GenAI-based approach considerably outperforms the other approaches in terms of RMSE value, however, regime-unaware model still degrades depending on the longer horizon. In contrast, the proposed regime-aware GenAI-enhanced DT framework consistently achieves the smallest error regardless of the horizon size. The key factor underlying this result is the usage of both hybrid field features and regime transitions into the prediction process. Moreover, the difference in RMSE values becomes more evident at larger horizons, demonstrating the robustness of the proposed method in long-term prediction scenarios. Overall, the obtained results prove the usefulness of integrating regimes awareness into proactive predictions of interference. Fig. 4(c) compares the worst-case user rate achieved by the proposed framework and the benchmark schemes. The worst-case rate is defined as R_{\min} , which captures the reliability of the weakest user link. The FF Reactive ZF scheme shows the lowest performance because it neglects NF spherical-wave propagation and does not exploit future channel prediction. The Reactive Hybrid-Field method improves the minimum rate by accounting for NF and FF regimes, but remains limited by its reliance on instantaneous CSI. The Deterministic DT baseline further improves performance by using future DT-assisted prediction; however, its single-trajectory design is less robust to uncertainty in blockage and mobility. The GenAI-DT Regime-Unaware scheme benefits from stochastic future generation but suffers from mismatched beamforming due to the lack of NF/FF regime separation. The proposed GenAI-enhanced DT regime-aware framework achieves the highest worst-case user rate by jointly exploiting stochastic future prediction and regime-aware proactive optimization. VI Conclusions This work presented an integrated DT and GenAI framework for proactive interference suppression in dynamic indoor XL-MIMO systems. The proposed framework was capable of learning, predicting, and adapting to evolving network conditions, thereby advancing beyond conventional approaches that relied on instantaneous or reactive CSI. By leveraging a physics-consistent DT for high-fidelity environment replication and a GenAI model for stochastic future state generation, the framework enabled predictive decision-making across hybrid NF and FF propagation regimes. The incorporation of blockage dynamics, user mobility, and hotspot formation within a unified spatio-temporal modeling framework allowed the system to anticipate interference and proactively adapt beamforming strategies. Extensive simulations demonstrated that the proposed approach outperformed deterministic DT, GenAI-unaware, and reactive baseline methods in terms of interference reduction, SINR improvement, and outage performance.