Search for Long-Lived Dark Photons from Dark Radiation at the LHC Chuan-Ren Chen, Van Que Tran Abstract We investigate a novel production mechanism for long-lived dark photons at the LHC, arising from dark radiation emitted from χ \chi in Z → χ ¯ ​ χ Z\to\bar{\chi}\chi decays, where χ \chi is a fermionic dark matter candidate. The effective Z ​ χ ​ χ Z\chi\chi coupling is generated radiatively through one-loop diagrams involving the top quark and a new colored scalar. We show that dark photons produced via this dark radiation channel can dominate over the conventional sources—meson decays and proton bremsstrahlung—across wide regions of parameter space, particularly for small kinetic mixing and dark photon masses well above the GeV scale. Using this enhanced production mechanism, we analyze the sensitivity of dedicated long-lived particle detectors, including FASER2, FACET, and MATHUSLA. We find that these experiments can significantly surpass existing bounds, probing regions of dark photon parameter space consistent with the observed dark matter relic abundance and inaccessible in conventional dark photon scenarios. I Introduction Astrophysical and cosmological observations provide compelling evidence for the existence of dark matter (DM), which dominates the matter density of the Universe. However, the particle nature of DM remains unknown. The absence of signals in direct, indirect, and collider searches indicates that the DM particle may interact extremely weakly with the Standard Model (SM) sector, for example through loop effects or feeble portal interactions. A minimal and well-motivated realization consists of a Dirac fermion DM candidate \chi residing in a dark sector charged under a broken U(1) gauge symmetry, which communicates with the SM via kinetic mixing Pospelov et al. 2008 . The corresponding massive gauge boson, the dark photon A^{\prime} , mediates the interactions between the two sectors. This framework accommodates the observed relic abundance over a wide range of parameter space. It should be noted that, for m_{A^{\prime}}\frac{h+H}{(d+L)\cos\phi}\;\&\;|\tan\phi|<\frac{W}{2(h+H)},\\ &\frac{d+L}{\cos\theta}\quad&{\rm if}\;\;&\tan\theta<\frac{h+H}{(d+L)\cos\phi}\;\&\;|\sin\phi|<\frac{W}{2(d+L)\tan\theta},\\ &\frac{W}{2\sin\theta|\sin\phi|}\quad&{\rm if}\;\;&|\sin\phi|>\frac{W}{2(d+L)\tan\theta},\end{aligned}\right. \displaystyle L_{\rm min} \displaystyle= \displaystyle\left\{\begin{aligned} &\frac{h}{\sin\theta\cos\phi}\quad&{\rm if}\;\;&\tan\theta<\frac{h}{d\cos\phi},\\ &\frac{d}{\cos\theta}\quad&{\rm if}\;\;&\tan\theta>\frac{h}{d\cos\phi},\end{aligned}\right. (21) \displaystyle f(\theta,\phi) \displaystyle= \displaystyle\Theta\left(\tan\theta-\frac{h}{(d+L)\cos\phi}\right)\,\Theta\left(\frac{h+H}{d\cos\phi}-\tan\theta\right)\,\Theta\left(\frac{W}{2h}-|\tan\phi|\right)\Theta\left(\cos\phi\right). For the MATHUSLA detector, we take the latest geometry proposal d= 70 m, h= 81 m, W= 40 m, L= 40 m, and H= 11 m Aitken et al. 2025 . The expected number of detectable dark photon events in far detectors is given by N={\cal L}\cdot\sigma_{A^{\prime}}\cdot\langle P_{A^{\prime}}\rangle\quad{\rm with}\quad\langle P_{A^{\prime}}\rangle=\frac{1}{N_{\rm A^{\prime}}}\sum_{i=1}^{N_{A^{\prime}}}P_{A^{\prime}_{i}}, (23) where {\cal L} is the integrated luminosity, \sigma_{A^{\prime}}=\sigma_{pp\to Z}\times\text{BR}(Z\to\bar{\chi}\chi)\times\langle{n}_{A^{\prime}}\rangle is the total dark photon production cross section, \langle{n}_{A^{\prime}}\rangle denotes the expectation value for the number of dark photons radiated from a \bar{\chi}\chi pair, \langle P_{A^{\prime}}\rangle is the average detection probability, N_{A^{\prime}} is the number of dark photons produced in the simulation, and P_{A^{\prime}_{i}} is the detection probability of the i -th event, computed using Eq. ( 17 ). Figure 4: Projected 95\% exclusion sensitivity for FASER (dashed red), FASER2 (dashed blue), FACET (dashed green), and MATHUSLA (dashed purple) in the plane of {\rm BR}(Z\to\bar{\chi}\chi) and the proper lifetime of the dark photon. We fix m_{\chi}=2 GeV and \Delta=0.3 . The horizontal solid black line shows the current constraint from the Z invisible decay width. Figure 5: Projected 95\% exclusion sensitivity for FASER2, FACET, and MATHUSLA in the (m_{A^{\prime}},\epsilon) plane. We fix \Delta=0.3 , assume {\rm BR}(Z\to\bar{\chi}\chi)=10^{-4} , and vary g_{D} to reproduce the observed DM relic abundance. Solid green, blue, and purple contours correspond to the dark-radiation induced dark photon signals at FASER2, FACET, and MATHUSLA, respectively. The dotted green and blue curves show the sensitivities to the conventional dark photon signals from meson decay and proton bremsstrahlung, computed using the FORESEE package Kling and Trojanowski 2021 . The vertical dotted line indicates the current DM direct detection bound on m_{\chi} discussed in Sec. III . Light gray regions denote existing constraints on the conventional dark photon parameter space. VI Numerical results In this section, we present the projected sensitivities of FASER2, FACET, and MATHUSLA to LLDPs. We assume zero background and set the 95\% exclusion reach by requiring N=3 signal events. For FASER2, FACET, and MATHUSLA we take an integrated luminosity of {\cal L}=3\penalty\ \text{ab}^{-1} , while the LHC run 2 luminosity for FASER is {\cal L}=0.15\penalty\ \text{ab}^{-1} . Fig. 4 displays the projected sensitivity in the ({\rm BR}(Z\to\bar{\chi}\chi),c\tau_{A^{\prime}}) plane for a benchmark point with m_{\chi}=2\penalty\ \text{GeV} and \Delta=0.3 , which requires g_{D}\simeq 1.7 to obtain the correct relic abundance. While FASER alone does not surpass the current Z invisible width bound, FASER2, FACET, and MATHUSLA improve significantly upon it. FASER2 is sensitive down to {\rm BR}(Z\to\bar{\chi}\chi)\simeq 3\times 10^{-5} at c\tau_{A^{\prime}}\sim 4 m, while FACET reaches two orders of magnitude lower, {\rm BR}\simeq 3\times 10^{-7} near c\tau_{A^{\prime}}\sim 1 m. Thanks to its large fiducial volume and transverse geometry, MATHUSLA provides the strongest reach, probing {\rm BR}\simeq 2\times 10^{-7} at c\tau_{A^{\prime}}\sim 30 m. Although FASER and FACET are located further from the interaction point, dark photons produced in the forward region typically carry larger momenta and hence larger boost factors, requiring shorter proper lifetimes to decay inside the detector as compared to the transverse region detector, e.g. MATHUSLA. Fig. 5 presents the sensitivities in the (m_{A^{\prime}},\epsilon) plane for {\rm BR}(Z\to\bar{\chi}\chi)=10^{-4} and \Delta=0.3 . We find that dark photons originating from dark radiation (solid contours) provide significantly enhanced reach compared to the conventional production mechanisms (dotted contours). For FASER2, the dark radiation signal allows probing m_{A^{\prime}}\sim(0.8 – 30 GeV) and \epsilon\simeq ( 10^{-9} – 3\times 10^{-7} ), whereas the meson/bremsstrahlung channels are restricted to m_{A^{\prime}}\lesssim 1 GeV and \epsilon\gtrsim 7\times 10^{-8} . Similarly, FACET can test masses up to \sim 40 GeV and mixings as small as \epsilon\sim 2\times 10^{-10} for dark radiation, while the conventional channels are limited to m_{A^{\prime}}\lesssim 1.5 GeV and \epsilon\gtrsim 3\times 10^{-8} . Notably, for MATHUSLA the entire parameter space from conventional production is already excluded by existing beam-dump experiments, but dark radiation opens a large new region at small \epsilon and heavy m_{A^{\prime}} . At small m_{A^{\prime}} , relic-density requirements force g_{D} to be small, reducing the dark-radiation yield. The dips near m_{A^{\prime}}\sim 0.8 GeV arise from hadronic resonances in the dark photon width. The vertical dotted line reflects direct-detection limits, which eliminate part of the parameter space unless \chi constitutes only a subcomponent of the DM density. VII Conclusion In this work, we present a framework in which dark photons can be produced via the radiation from dark matter \chi in Z decay, providing an efficient probe of LLDP with long-lived particle detectors at the LHC. In contrast to traditional searches for LLDPs from meson decays and bremsstrahlung, parameters governing the production and decay of dark photons are decoupled in this scenario. The interaction between dark matter and the Z boson can be induced at one-loop level via a heavy colored scalar \Phi that couples to both dark matter and Standard Model fermions, chosen to be the top quark in this study. A sizable effective coupling g_{Z}^{\chi} can be generated through (t,\Phi) loops and allows the decay Z\to\chi\chi to occur at rates close to current experimental limits. The dark matter subsequently emits dark radiation, \chi\to\chi A^{\prime} , producing an energetic source of LLDPs whose production is governed by the U(1)_{D} gauge coupling that can be determined by thermal relic considerations of the dark sector. We analyzed the thermal history of \chi , highlighting the importance of the forbidden-annihilation regime, which naturally accommodates large dark gauge couplings while maintaining the correct relic abundance. We then evaluated leading constraints from the invisible Z width, monojets, and isospin-violating DM direct detection, identifying the viable region in the (m_{\chi},g_{Z}^{\chi},g_{D}) parameter space. Using detailed simulations that incorporate realistic detector geometry and A^{\prime} decay kinematics, we study the current constraints and projected sensitivities of FASER/FASER2, FACET, and MATHUSLA. We found that production of dark photons from dark matter radiation dramatically enhances LLP sensitivity compared to the traditional dark photon production channels. The future FASER2 can test branching ratios down to {\rm BR}(Z\to\bar{\chi}\chi)\sim 10^{-5} and probe dark photon masses up to 30 GeV with kinetic mixings down to \epsilon\sim 10^{-7} . FACET and MATHUSLA achieve the strongest coverages, extending the sensitivity to {\rm BR}(Z\to\bar{\chi}\chi)\sim{\cal O}(10^{-7}) and exploring vast regions of parameter space that are inaccessible in the conventional dark photon models. Acknowledgments We would like to thank Tzu-Chiang Yuan and Shu-Yu Ho for useful discussions. This work was partially supported by the National Science and Technology Council (NSTC) of Taiwan under Grant No. NSTC-113-2112-M-003-007 and NSTC-114-2112-M-003-009 (CRC), the Ministry of Education (Higher Education Sprout Project NTU-114L104022-1), and the National Center for Theoretical Sciences of Taiwan (VQT). This work was also supported in part by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) under grant number 103.01-2023.50 (VQT). Appendix A Constraints from Higgs Signal Strength Measurements For the case m_{h}<2m_{\Phi} and moderate values of \lambda_{H\Phi} , the modification to the Higgs total width is negligible. The leading-order correction to Higgs production via gluon fusion relative to the SM can be expressed as Batell et al. 2012 \frac{\sigma(gg\to h)}{\sigma(gg\to h)_{\rm SM}}\simeq\frac{\Gamma(h\to gg)}{\Gamma(h\to gg)_{\rm SM}}=\Bigg|1-\frac{1}{2}\frac{\lambda_{H\Phi}v^{2}}{m_{\Phi}^{2}}C_{\Phi}\frac{A_{0}(\tau_{\Phi})}{\sum_{f}A_{1/2}(\tau_{f})}\Bigg|^{2}, (24) where \tau_{i}=m_{h}^{2}/(4m_{i}^{2}) , C_{\Phi}=4/3 is the quadratic Casimir of the SU(3)_{C} fundamental representation, and A_{0} ( A_{1/2} ) denotes the scalar (fermion) loop functions (see below). Similarly, the Higgs partial width to photons is modified as \frac{\Gamma(h\to\gamma\gamma)}{\Gamma(h\to\gamma\gamma)_{\rm SM}}=\Bigg|1+\frac{1}{2}\frac{\lambda_{H\Phi}v^{2}}{2m_{\Phi}^{2}}d_{\Phi}Q_{\Phi}^{2}\frac{A_{0}(\tau_{\Phi})}{A_{1}(\tau_{W})-\sum_{f}N_{f}Q_{f}^{2}A_{1/2}(\tau_{f})}\Bigg|^{2}, (25) where d_{\Phi}=3 is the dimension of the SU(3)_{C} representation, Q_{\Phi} is the electric charge of \Phi , N_{f} and Q_{f} denote the color factor and charge of fermion f . . The loop functions for h\to gg and h\to\gamma\gamma are given as \displaystyle A_{0}(\tau)=\frac{1}{\tau^{2}}\left(f(\tau)-\tau\right), (26) \displaystyle A_{1/2}(\tau)=\frac{2}{\tau^{2}}\left[\tau+(\tau-1)f(\tau)\right], (27) \displaystyle A_{1}(\tau)=2+\frac{3}{\tau}+\frac{3}{\tau}(2-\frac{1}{\tau})f(\tau), (28) where \tau=m_{h}^{2}/(4m^{2}) , with m being the mass of particle in the loop, and the function f(\tau) is given as f(\tau)=\left\{\begin{array}[]{cr}{\rm arcsin}^{2}(\sqrt{\tau})\,,&(\tau\leq 1)\,,\\ -\frac{1}{4}\left[\log\left(\frac{1+\sqrt{1-\tau^{-1}}}{1-\sqrt{1-\tau^{-1}}}\right)-i\pi\right]^{2}\,,&(\tau>1)\,;\end{array}\right. (29) To quantify the impact on Higgs searches, we compute the signal strength for the diphoton channel, \mu^{\gamma\gamma}_{ggh}=\frac{\sigma(gg\to h)\times{\rm BR}(h\to\gamma\gamma)}{\sigma(gg\to h)_{\rm SM}\times{\rm BR}(h\to\gamma\gamma)_{\rm SM}}\simeq\frac{\Gamma(h\to gg)}{\Gamma(h\to gg)_{\rm SM}}\times\frac{\Gamma(h\to\gamma\gamma)}{\Gamma(h\to\gamma\gamma)_{\rm SM}}. (30) At leading order, the Higgs decay widths into fermion pairs, WW^{*} , and ZZ^{*} remain unchanged compared to the SM. Thus, the corresponding signal strengths for these modes, with the Higgs produced via gluon fusion, reduce to \mu^{f\bar{f},WW^{*},ZZ^{*}}_{ggh}\simeq\frac{\Gamma(h\to gg)}{\Gamma(h\to gg)_{\rm SM}}. (31) Figure 6: The constraints from the Higgs signal strength data projected on m_{\Phi},\lambda_{H\Phi} plane. Using the latest ATLAS measurements of Higgs signal strengths of Higgs decays to \gamma\gamma , WW^{*} , ZZ^{*} , \tau^{+}\tau^{-} and \mu^{+}\mu^{-} modes from Ref. Aad et al. 2022 , we derive the constraints on the colored scalar mass and the portal coupling \lambda_{H\Phi} , as shown in Fig. 6 . For |\lambda_{H\Phi}|\gtrsim 1 , the colored scalar mass must be heavier than about 400 GeV. This bound is weaker than the constraints obtained from searches for top quark pairs plus missing energy at the LHC, as discussed previously. On the other hand, if the colored scalar is light, the quadratic interaction hh\Phi\Phi^{*} can enhance the di-Higgs production at pp collision Kribs and Martin 2012 . Given a heavy \Phi above the TeV scale in this analysis, these contributions to Higgs properties are not significant and satisfied the current experimental data. Appendix B Form Factors For One-Loop Effective Z\bar{\chi}\chi The expressions of the form factors in Eq. ( 3 ) are given by \displaystyle F_{L} \displaystyle=\frac{-i}{16\pi^{2}}N_{c}|\lambda_{\chi t}|^{2}\Bigg\{g_{R}^{t}\left[-B_{0}+2C_{00}-m_{t}^{2}C_{0}+m_{\chi}^{2}C_{11}+q^{2}\left(C_{0}+C_{1}+C_{2}\right)\right] \displaystyle\quad+g_{L}^{t}m_{t}^{2}C_{0}+g_{Z\Phi}\left[2\widetilde{C}_{00}+m_{\chi}^{2}\left(\widetilde{C}_{1}+\widetilde{C}_{11}\right)\right]\Bigg\}, (32) \displaystyle F_{R} \displaystyle=\frac{-i}{16\pi^{2}}N_{c}|\lambda_{\chi t}|^{2}m_{\chi}^{2}\left[g_{R}^{t}C_{11}+g_{Z\Phi}\left(\widetilde{C}_{1}+\widetilde{C}_{11}\right)\right], (33) \displaystyle F_{M} \displaystyle=\frac{i}{16\pi^{2}}N_{c}|\lambda_{\chi t}|^{2}m_{\chi}^{2}\left[g_{R}^{t}\left(C_{11}+C_{1}\right)+g_{Z\Phi}\left(\widetilde{C}_{1}+\widetilde{C}_{11}\right)\right], (34) \displaystyle F_{E} \displaystyle=0. (35) where N_{c} is color factor, \displaystyle g_{L}^{t} \displaystyle=\frac{g}{c_{W}}\left(\frac{1}{2}-\frac{2}{3}s_{W}^{2}\,\right),\quad\quad g_{R}^{t}=\frac{g}{c_{W}}\left(-\frac{2}{3}s_{W}^{2}\,\right), (36) are left-handed and right-handed components of Z\bar{t}t vertex, respectively and g_{Z\Phi}=\frac{g}{c_{W}}\left(-\frac{2}{3}s_{W}^{2}\right) is the coupling of Z\Phi\Phi^{*} vertex. In Eq. ( B ), B_{0} , C_{j,jk} and \widetilde{C}_{j,jk} are Passarino-Veltman (PV) coefficient functions Passarino and Veltman 1979 which are given as \displaystyle B_{0} \displaystyle\equiv\mathbf{B}_{0}(m_{\chi}^{2};\,m_{t}^{2},\,m_{\Phi}^{2}), (37) \displaystyle C_{j,jk} \displaystyle\equiv\mathbf{C}_{j,jk}(q^{2},m_{\chi}^{2},m_{\chi}^{2};m_{t}^{2},m_{t}^{2},m_{\Phi}^{2}), (38) \displaystyle\widetilde{C}_{j,jk} \displaystyle\equiv\mathbf{C}_{j,jk}(q^{2},m_{\chi}^{2},m_{\chi}^{2};m_{\Phi}^{2},m_{\Phi}^{2},m_{t}^{2}). (39) We now examine the UV divergence structure of the induced coupling. Working in dimensional regularization with d=4-2\epsilon spacetime dimensions, the relevant PV scalar functions carry the following divergent parts are \displaystyle{\rm Div}[B_{0}]=\Delta_{\epsilon}\,,\qquad{\rm Div}[C_{00}]={\rm Div}[\widetilde{C}_{00}]=\frac{\Delta_{\epsilon}}{4}\,, (40) where \Delta_{\epsilon}\equiv\frac{1}{\epsilon}-\gamma_{E}+\ln(4\pi) is the standard UV regulator. Thus, only the F_{L} form factor contains the divergent parts with \displaystyle{\rm Div}[F_{L}] \displaystyle\sim\Bigg[g_{R}^{t}\left(-{\rm Div}[B_{0}]+2\,{\rm Div}[C_{00}]\right)+g_{Z\Phi}\left(2\,{\rm Div}[\widetilde{C}_{00}]\right)\Bigg], (41) \displaystyle\sim\frac{\Delta_{\epsilon}}{2}\left(g_{Z\Phi}-g_{R}^{t}\right)=0. (42) Therefore, the UV divergence cancels exactly. Figure 7: Left panel: Form factors as a function of colored scalar mass with fixing m_{\chi}=2 GeV and \lambda_{\chi t}=3 . The solid blue, black and red lines represent |F_{L}| , |F_{R}| and |F_{M}| , respectively. Right panel: The decay width of Z\chi\bar{\chi} (orange line) as a function of the Yukawa coupling \lambda_{\chi t} with fixing m_{\chi}=2 GeV and m_{\Phi}=1.3 TeV. The dashed red line indicates the current bound from the invisible decay of the Z boson. As shown in the left panel of Fig. 7 , the form factor F_{L} dominates over others in our parameter space of interest. With fixing m_{\chi}=2 GeV and m_{\Phi}=1.3 TeV, the current constraint from the Z invisible constraint requires the Yukawa coupling to be \lambda_{\chi t}\lesssim 10 as shown in the right panel of Fig. 7 .