Spectral Signatures of Active Fluctuations in Semiflexible Polymers Love Grover, Anil Kumar Dasanna, Abhishek Chaudhuri Abstract We study how an active bath is transduced into the internal fluctuation spectrum of a semiflexible polymer. Starting from the statistics of active forces exerted by an explicit bath of active Brownian particles, we derive an effective description in terms of temporally persistent and spatially correlated noise, and test it against simulations of both explicit-bath and implicit-noise models. We find that activity reorganizes polymer fluctuations spectrally rather than uniformly: increasing the active force predominantly enhances the lowest modes, while increasing persistence shifts the spectral weight toward progressively longer wavelengths. The theory captures this mode-level reorganization well and explains the strong qualitative correspondence between explicit and implicit active baths over a broad parameter range. In contrast, global size measures such as the radius of gyration are systematically underestimated, which we trace to activity-induced bond stretching and contour-length renormalization absent from the present fixed-contour theory. Our results show that a semiflexible polymer acts as a multiscale probe of active matter, resolving the temporal and spatial structure of nonequilibrium forcing through its mode spectrum. I Introduction The concept of temperature lies at the heart of equilibrium statistical mechanics, providing a single parameter that characterizes fluctuations across all degrees of freedom. In active matter—systems driven out of equilibrium by agents such as molecular motors, ion pumps, or self-propelled particles—this universality generally breaks down. Active systems are continuously fueled at the microscopic scale and they violate the fluctuation–dissipation theorem (FDT) that underpins equilibrium thermodynamics 28 ; 44 . A long-standing goal in the field has therefore been to understand to what extent thermodynamic ideas can be extended to active systems. Early experiments showed that passive tracers in bacterial suspensions exhibit enhanced diffusion reminiscent of motion at elevated temperature 57 ; 29 ; 40 ; 10 ; 3 . This motivated the introduction of an “effective temperature” ( T_{\text{eff}} ), often defined operationally through a ratio of fluctuation to dissipation 13 ; 35 . For simple active particles and tracers, generalized equipartition-like relations can indeed yield useful effective temperatures 37 . Recent studies have further characterized active Brownian particle systems in terms of activity-dependent kinetic temperatures, effective diffusivities, and viscous drag, highlighting both the utility and the limitations of reduced thermodynamic and transport descriptors in active matter 45 ; 33 ; 14 ; 12 ; 47 ; 32 ; 38 ; 48 ; 8 ; 9 ; 48 ; 34 . However, such effective temperatures are typically observable- and timescale-dependent, so different probes need not report the same value. Moreover, even the active bath itself need not admit a unique thermal characterization: for example, in motility-induced phase separation (MIPS), dense and dilute phases can exhibit distinct effective temperatures 38 . An active environment, therefore, cannot, in general, be viewed as a single thermal reservoir 21 . This issue becomes even sharper for extended soft objects, whose internal degrees of freedom span a hierarchy of relaxation times and length scales. Active fluctuations typically possess intrinsic temporal persistence 19 ; 20 , and may also be correlated spatially. As a result, the same active bath can act very differently on different internal modes of an embedded object. A semiflexible polymer is a minimal model system in which such scale-dependent coupling can be studied systematically. Its conformations can be decomposed into normal modes, each with its own relaxation time, so that the polymer naturally acts as a multiscale probe of active forcing. One common way to model an active environment is to replace it with temporally correlated noise 36 . A variety of colored-noise descriptions have been used in this context, including telegraphic or dichotomous noise, run-and-tumble forcing, and Ornstein–Uhlenbeck (OU) noise, both for active networks and for passive polymers driven out of equilibrium by active fluctuations 27 ; 53 ; 49 ; 5 ; 24 . Related analytical studies of flexible and semiflexible active polymers have shown that activity can strongly modify both conformational statistics and internal dynamics, with finite extensibility and mode-dependent relaxation playing an important role 16 ; 17 ; 18 . More recently, colored-noise descriptions with explicit spatial structure have also been introduced to mimic forcing with a finite correlation length, as expected in active fluids and chaotic nonequilibrium media 23 . Complementary to such implicit descriptions, passive polymers in active baths have also been studied in a variety of explicit settings, including suspensions of self-propelled particles, hydrodynamic active environments, and motor-driven substrates, where activity has been shown to induce strong conformational changes, anomalous transport, localization, migration, and swelling or collapse phenomena 1 ; 56 ; 31 ; 43 ; 55 ; 51 ; 2 ; 4 ; 41 ; 42 ; 54 ; 46 ; 39 ; 22 ; 30 ; 50 . These studies collectively show that active forcing can often be represented at a coarse-grained level by a temporally persistent and spatially structured drive, but they also highlight the wide range of conformational responses that can arise in explicit nonequilibrium environments. At the same time, an important question remains open: which features of the response of a polymer in an explicit active bath can be captured by a reduced implicit colored-noise description, and which require additional geometric or microscopic information beyond such a coarse-grained representation? This question is most naturally addressed through a mode-resolved analysis. Historically, shape-mode decompositions have been widely used to extract mechanical properties of semiflexible filaments. For example, Gittes et al. 26 and Brangwynne et al. 6 used mode amplitudes to infer the flexural rigidity of microtubules and actin by relating thermal mode fluctuations to equipartition. In active systems, however, mode analysis reveals much richer physics. Brangwynne et al. 7 showed that intracellular activity strongly amplifies microtubule shape fluctuations beyond equilibrium expectations, while Gladrow et al. 27 demonstrated that active filament networks violate detailed balance and exhibit non-trivial energy circulation in mode space. These studies show that mode amplitudes can be used to resolve the distribution of nonequilibrium forcing across scales. i f_{a}^{i} j f_{a}^{j} Figure 1: Schematic representation of a semiflexible polymer (blue beads) in a busy active environment. The polymer consists of beads of diameter \sigma . The active particles (red circles) are self-propelled with persistence vectors (arrows). Their collisions and persistent pushing generate forcing with nontrivial time and length scales on the polymer. While this schematic illustrates a generic active medium, our study specifically employs a monodisperse active bath with uniform self-propulsion. In this work, we study a semiflexible polymer immersed in an explicit bath of active Brownian particles and ask how the bath affects the polymer’s internal fluctuation spectrum. Starting from the statistics of the active forces acting on the polymer, we construct an approximate effective description in which the bath acts through temporally persistent, spatially correlated forcing. We then test this description primarily against simulations of a polymer embedded in an explicit active-particle bath. In addition, we compare these results with a reduced implicit coloured-noise model. Our central result is that the active bath reorganizes polymer fluctuations spectrally rather than uniformly. At fixed persistence time, increasing the active force magnitude f_{a} selectively enhances the low-mode sector, while at fixed f_{a} , increasing the persistence time \tau shifts the spectral weight toward progressively lower mode number. The active bath, therefore, does not act as a uniform heat source. It instead couples preferentially to modes whose intrinsic relaxation times are comparable to or longer than the bath correlation time. We show that the reduced theory captures this mode-level reorganization well for the explicit-bath model. We further find that the implicit coloured-noise model exhibits qualitatively similar large-scale conformational trends across a broad region of parameter space. We do not attempt a strict one-to-one mapping of microscopic parameters between the two descriptions. Our analysis naturally leads to a mode-dependent thermodynamic description. By mapping the active enhancement of each mode onto the equilibrium mode spectrum of a passive polymer, one may assign mode-dependent effective temperatures rather than a single scalar temperature. From this perspective, the polymer acts as a spectroscopic probe of the active environment 52 , resolving how different wavelengths couple differently to nonequilibrium forcing. More broadly, our results show that the relevant time and length scales of active forcing are filtered through the polymer’s hierarchy of internal modes, and that this filtering determines its nonequilibrium conformational state. II Models and simulation protocol We study a semiflexible polymer driven out of equilibrium by two distinct realizations of activity: (i) an explicit bath of self-propelled particles (active Brownian particles, ABPs) that exerts forces through direct interactions, and (ii) an implicit bath in which activity enters as a prescribed Ornstein–Uhlenbeck (OU) colored-noise forcing acting on the polymer beads. Unless otherwise stated, all simulations are performed in two dimensions with periodic boundary conditions. II.1 Polymer model and conservative interactions The polymer is represented as a bead–spring chain of N beads (diameter \sigma ) at positions \{\mathbf{r}_{i}\}_{i=1}^{N} . Nearest-neighbour connectivity is enforced by harmonic bonds, V_{b}=\frac{k_{s}}{2}\sum_{i=2}^{N}\left(\,|\mathbf{r}_{i}-\mathbf{r}_{i-1}|-r_{0}\,\right)^{2}, (1) and semiflexibility is introduced via a harmonic bending penalty on successive bond angles, V_{a}={\kappa}\sum_{i=2}^{N-1}\left(1-\cos{\theta_i}\right), (2) where \theta_{i} is the angle between bond vectors \mathbf{r}_{i}-\mathbf{r}_{i-1} and \mathbf{r}_{i+1}-\mathbf{r}_{i} . The equilibrium bond length is r_{0}=2^{1/6}\sigma . Excluded-volume interactions are modeled by a truncated (purely repulsive) Weeks–Chandler–Andersen (WCA) potential. For any interacting pair at separation r , V_{\rm LJ}(r)=4\epsilon\left[\left(\frac{\sigma}{r}\right)^{12}-\left(\frac{\sigma}{r}\right)^{6}\right],\qquad r0) with a=1/\tau_{\rm eff} and b=\omega_{n} yields I_{n}^{\rm act}=\frac{q_{n}^{2}D_{0}e^{-q_{n}^{2}\sigma^{2}}}{\zeta^{2}}\,\frac{\tau_{\rm eff}}{\omega_{n}(1+\tau_{\rm eff}\omega_{n})}. Using \omega_{n}=\kappa q_{n}^{4}/\zeta , this becomes I_{n}^{\rm act}=\frac{1}{\kappa q_{n}^{2}}\,\frac{D_{0}\tau_{\rm eff}}{\zeta\,[1+\tau_{\rm eff}\omega_{n}]}\,e^{-q_{n}^{2}\sigma^{2}}. Combining the thermal and active pieces gives \langle|a_{n}|^{2}\rangle=\frac{1}{\kappa q_{n}^{2}}\left[k_{B}T+\frac{D_{0}\tau_{\rm eff}}{\zeta\,[1+\tau_{\rm eff}\omega_{n}]}e^{-q_{n}^{2}\sigma^{2}}\right]. (44) This is the expression quoted in the main text. If a uniform backbone tension \tau is included, the mode relaxation rate is modified to \omega_{n}(\tau)=\frac{\kappa q_{n}^{4}+\tau q_{n}^{2}}{\zeta}. The thermal part of the variance is then \langle|a_{n}|^{2}\rangle_{\rm th}=\frac{k_{B}T}{\kappa q_{n}^{2}+\tau}, and the active contribution is obtained by replacing \omega_{n}\to\omega_{n}(\tau) in the frequency integral. The result is \langle|a_{n}|^{2}\rangle=\frac{1}{\kappa q_{n}^{2}+\tau}\left[k_{B}T+\frac{D_{0}\tau_{\rm eff}}{\zeta\,[1+\tau_{\rm eff}\omega_{n}(\tau)]}e^{-q_{n}^{2}\sigma^{2}}\right]. This is the tension-generalized expression quoted in the main text. Appendix G Radius of gyration from tangent-mode amplitudes We work in the weak-bending regime, writing the polymer contour as \mathbf{r}(s)=x(s)\,\hat{\mathbf{x}}+\mathbf{r}_{\perp}(s), (45) with s\in[0,L] and transverse tangent field \mathbf{u}_{\perp}(s)\equiv\partial_{s}\mathbf{r}_{\perp}(s) . For free ends we expand \mathbf{u}_{\perp} in the orthonormal cosine basis \mathbf{u}_{\perp}(s)=\sum_{n\geq 1}\mathbf{a}_{n}\,\phi_{n}(s),\qquad\phi_{n}(s)=\sqrt{\frac{2}{L}}\cos(q_n s), (46) with q_{n}=\frac{n\pi}{L} , so that \int_{0}^{L}ds\,\phi_{n}(s)\phi_{m}(s)=\delta_{nm} . Throughout we assume mode decoupling \langle\mathbf{a}_{n}\cdot\mathbf{a}_{m}\rangle=\delta_{nm}\langle|\mathbf{a}_{n}|^{2}\rangle . G.1 Transverse contribution R_{g,\perp}^{2} Integrating the tangent expansion gives \mathbf{r}_{\perp}(s)=\int_{0}^{s}ds^{\prime}\,\mathbf{u}_{\perp}(s^{\prime})=\sum_{n\geq 1}\mathbf{a}_{n}\,\sqrt{\frac{2}{L}}\frac{\sin(q_n s)}{q_{n}}. (47) The transverse radius of gyration is R_{g,\perp}^{2}\equiv\frac{1}{L}\int_{0}^{L}ds\,\Big\langle\big|\mathbf{r}_{\perp}(s)-\mathbf{r}_{\perp,\rm cm}\big|^{2}\Big\rangle, (48) where \mathbf{r}_{\perp,\rm cm}\equiv\frac{1}{L}\int_{0}^{L}ds\,\mathbf{r}_{\perp}(s). Using Eq. ( 47 ), mode decoupling, and \frac{1}{L}\int_{0}^{L}ds\,\sin^{2}(q_{n}s)=\frac{1}{2} , we obtain \frac{1}{L}\int_{0}^{L}ds\,\langle|\mathbf{r}_{\perp}(s)|^{2}\rangle=\sum_{n\geq 1}\frac{\langle|\mathbf{a}_{n}|^{2}\rangle}{Lq_{n}^{2}}. (49) The CM term contributes only for odd n , since \int_{0}^{L}ds\,\sin(q_n s)=\frac{1-(-1)^{n}}{q_{n}}=\begin{cases}0,&n\ \text{even},\\[4.0pt] \frac{2}{q_{n}},&n\ \text{odd}.\end{cases} (50) A short calculation gives \langle|\mathbf{r}_{\perp,\rm cm}|^{2}\rangle=\sum_{n\ {\rm odd}}\frac{8}{L^{2}q_{n}^{4}}\,\langle|\mathbf{a}_{n}|^{2}\rangle. (51) Combining the two pieces yields the weighted sum rule R_{g,\perp}^{2}=\sum_{n\geq 1}\frac{\langle|\mathbf{a}_{n}|^{2}\rangle}{L\,q_{n}^{2}}\,W_{n},\qquad W_{n}=\begin{cases}1,&n\ \text{even},\\[6.0pt] 1-\dfrac{8}{n^{2}\pi^{2}},&n\ \text{odd},\end{cases} (52) where we used q_{n}=n\pi/L to rewrite the odd-mode correction. G.2 Longitudinal contribution R_{g,\parallel}^{2} Inextensibility implies (\partial_{s}x)^{2}+|\mathbf{u}_{\perp}|^{2}=1 . Therefore, \partial_{s}x=\sqrt{1-|\mathbf{u}_{\perp}|^{2}}\simeq 1-\frac{1}{2}|\mathbf{u}_{\perp}|^{2}, (53) which gives x(s)=s-\epsilon(s) with \epsilon(s)\equiv\frac{1}{2}\int_{0}^{s}ds^{\prime}\,|\mathbf{u}_{\perp}(s^{\prime})|^{2}. (54) The longitudinal radius of gyration is R_{g,\parallel}^{2}\equiv\frac{1}{L}\int_{0}^{L}ds\,\Big\langle\big(x(s)-x_{\rm cm}\big)^{2}\Big\rangle, (55) where x_{\rm cm}=\frac{1}{L}\int_{0}^{L}ds\,x(s)=\frac{L}{2}-\bar{\epsilon}, with \bar{\epsilon}\equiv\frac{1}{L}\int_{0}^{L}ds\,\epsilon(s) . Expanding to first order in \epsilon (i.e. keeping the leading \mathcal{O}(|\mathbf{u}_{\perp}|^{2}) correction) gives \big(x(s)-x_{\rm cm}\big)^{2}=\left(s-\frac{L}{2}\right)^{2}-2\left(s-\frac{L}{2}\right)\big(\epsilon(s)-\bar{\epsilon}\big)+\mathcal{O}(\epsilon^{2}). (56) Upon integration over s , the \bar{\epsilon} term drops out because \int_{0}^{L}ds\,(s-L/2)=0 , so R_{g,\parallel}^{2}\simeq{\frac{1}{L}\int_{0}^{L}ds\left(s-\frac{L}{2}\right)^{2}}-\frac{2}{L}\int_{0}^{L}ds\left(s-\frac{L}{2}\right)\langle\epsilon(s)\rangle. (57) To evaluate \langle\epsilon(s)\rangle , note that mode decoupling implies \langle|\mathbf{u}_{\perp}(s)|^{2}\rangle=\frac{1}{L}\sum_{n\geq 1}\langle|\mathbf{a}_{n}|^{2}\rangle\Big[1+\cos(2q_n s)\Big], (58) since \phi_{n}(s)^{2}=(2/L)\cos^{2}(q_{n}s)=(1/L)[1+\cos(2q_ns)] . Using Eq. ( 54 ) then gives \langle\epsilon(s)\rangle=\sum_{n\geq 1}\langle|\mathbf{a}_{n}|^{2}\rangle\left[\frac{s}{2L}+\frac{\sin(2q_n s)}{4Lq_{n}}\right]. (59) Substituting Eq. ( 59 ) into Eq. ( 57 ) and using q_{n}=n\pi/L yields R_{g,\parallel}^{2}\simeq\frac{L^{2}}{12}-\frac{L}{12}\sum_{n\geq 1}\langle|\mathbf{a}_{n}|^{2}\rangle+\frac{L}{4\pi^{2}}\sum_{n\geq 1}\frac{\langle|\mathbf{a}_{n}|^{2}\rangle}{n^{2}}. (60) Equation ( 60 ) captures the leading reduction of the projected size. Corrections of order \epsilon^{2} correspond to fluctuations of the contraction field and are quartic in mode amplitudes. G.3 Total R_{g}^{2} Within this approximation the total squared radius of gyration decomposes as R_{g}^{2}\simeq R_{g,\parallel}^{2}+R_{g,\perp}^{2}, (61) with R_{g,\perp}^{2} from Eq. ( 52 ) and R_{g,\parallel}^{2} from Eq. ( 60 ). In practical evaluations, the mode sums are truncated at the microscopic cutoff set by discretization. Appendix H Exact finite- N reconstruction of the radius of gyration In this appendix we derive an exact finite- N representation of the radius of gyration for the discrete bead–spring chain used in the simulations. The purpose of this construction is to provide a benchmark reconstruction of R_{g} that does not rely on the continuum weak-bending approximation. Consider a chain of N+1 monomers at positions \{\mathbf{r}_{i}\}_{i=0}^{N} and define the bond vectors \Delta\mathbf{r}_{k}\equiv\mathbf{r}_{k+1}-\mathbf{r}_{k},\qquad k=0,\dots,N-1. The radius of gyration can be written exactly as R_{g}^{2}=\frac{1}{(N+1)^{2}}\sum_{i=0}^{N}\sum_{j=i+1}^{N}\left\langle|\mathbf{r}_{j}-\mathbf{r}_{i}|^{2}\right\rangle. (62) Since \mathbf{r}_{j}-\mathbf{r}_{i}=\sum_{k=i}^{j-1}\Delta\mathbf{r}_{k}, Eq. ( 62 ) depends only on the bond vectors. We expand the bond vectors in a discrete cosine basis, \Delta\mathbf{r}_{k}=\frac{1}{2}\mathbf{b}_{0}+\sum_{n=1}^{N-1}\mathbf{b}_{n}\cos\!\left[\frac{n\pi}{N}\left(k+\frac{1}{2}\right)\right]. (63) Summing Eq. ( 63 ) from k=i to j-1 yields \mathbf{r}_{j}-\mathbf{r}_{i}=\frac{1}{2}\mathbf{b}_{0}(j-i)+\sum_{n=1}^{N-1}\mathbf{b}_{n}\,\frac{\sin(n\pi j/N)-\sin(n\pi i/N)}{2\sin(n\pi/2N)}. (64) Equation ( 64 ) is exact for the finite chain and makes explicit the geometric difference between the discrete reconstruction and its continuum large- N approximation. Substituting Eq. ( 64 ) into Eq. ( 62 ) and carrying out the sums over monomer indices gives a quadratic form in the bond-mode covariance matrix, R_{g}^{2}=W_{00}\,\langle\mathbf{b}_{0}\!\cdot\!\mathbf{b}_{0}\rangle+\sum_{n\geq 1}W_{nn}\,\langle\mathbf{b}_{n}\!\cdot\!\mathbf{b}_{n}\rangle\\ +\sum_{n\geq 1}W_{0n}\,\langle\mathbf{b}_{0}\!\cdot\!\mathbf{b}_{n}\rangle+\sum_{n