Predictions of Modular Symmetry Fixed Points on Neutrino Masses, Mixing, and Leptogenesis Priya 1, B. C. Chauhan 1, Deepak Kumar 2, and Takaaki Nomura 3 Abstract In recently proposed framework of non-holomorphic modular symmetry introduces the concept of negative and zero modular weight of Yukawa couplings. These Yukawa couplings are function of complex modulus τ \tau , which is responsible for the CP asymmetry produced during leptogenesis. In this work, we restrict the τ \tau on the fixed points of modular symmetry rather than its fundamental domain in such manner Yukawa couplings are also get fixed. We have adopt this framework and propose a type III seesaw mechanism. The model is tested against neutrino oscillation data through a χ 2 \chi^{2} analysis using NuFIT 6.1. To test the stability of these predictions, we also analyze regions near each fixed point by introducing a deviation τ → τ fixed ​ ( 1 + ϵ ​ e i ​ ϕ ) \tau\rightarrow\tau_{\rm fixed}(1+\epsilon e^{i\phi}) with ϵ ∈ ( 0 , 0.1 ) \epsilon\in(0,0.1) and ϕ ∈ ( − π , π ) \phi\in(-\pi,\pi) . Our results show that certain fixed points, along with their nearby regions, are capable of producing viable neutrino phenomenology while also generating the observed baryon asymmetry of the Universe. 1 Introduction The Standard Model(SM) of particle physics explains all the elementry particles with the neutrinos as massless left-handed Weyl fermions. However, the neutrino oscillation experiments, such as Super kamiokande 25 , Sudbary Neutrino observatory (SNO) 8 and KAmland 19 experiments confirmed that neutrinos are massive. This results provides direct experimental motivation for new physics beyond the Standard Model (BSM). Precision measurements from reactor and accelerator-based neutrino oscillation experiments have established all three mixing angles( \sin^{2}\theta_{13} , \sin^{2}\theta_{12} , \sin^{2}\theta_{23} ) and mass-squared differences( \Delta m^{2}_{\rm solar} and \Delta m^{2}_{\rm atm} ) with high accuracy. Despite this progress, the mechanism responsible for neutrino mass generation and the fundamental nature of neutrinos remain open questions, motivating extensions of the SM. The smallness of neutrino masses can be naturally explained by extending the SM with right-handed neutrinos through the seesaw mechanisms. In particular, the type-I seesaw mechanism arises from the addition of heavy fermionic fields that are singlets under the SM gauge group, i.e. SU(2)_{L} singlet fermions, which generate light Majorana neutrino masses after electroweak symmetry breaking 43 . In contrast, the type-II seesaw mechanism is realized by introducing an SU(2)_{L} scalar triplet with hypercharge Y=1 , whose vacuum expectation value directly contributes to the neutrino mass matrix 46 . The type-III seesaw mechanism involves the addition of fermionic fields transforming as triplets under SU(2)_{L} with zero hypercharge, which similarly induce small neutrino masses through their heavy Majorana mass terms 24 . Neutrino oscillation experiments have firmly established that neutrinos are massive and mix among flavors. After the successful measurement of the reactor mixing angle, all neutrino oscillation parameters have been determined with high precision, and the corresponding global-fit values, as provided by the NuFIT 6.1 analysis 67 ; 21 , are presented in a Table 1 . Despite significant experimental progress, the fundamental nature of neutrinos remains unresolved, as they may be either Dirac or Majorana fermions. In addition, the observed matter-antimatter asymmetry of the Universe is another open problem that can be addressed within the seesaw framework via leptogenesis, where the out-of-equilibrium decays of the lightest right-handed neutrino generate a lepton asymmetry that is subsequently converted into a baryon asymmetry through sphaleron processes. Flavor symmetries provide a well-motivated framework to explain neutrino masses and lepton mixing patterns 27 ; 11 ; 12 ; 58 ; 59 ; 64 ; 65 . But, conventional flavor models exhibit several drawbacks. The effective Lagrangian in such approaches typically involves a large number of flavon fields, leading to an extended parameter space. The vacuum alignment of these flavons plays a central role in determining the fermion mass matrices, thereby strongly constraining the model predictions and introducing sensitivity to alignment assumptions. Moreover, auxiliary symmetries are frequently required to suppress unwanted terms, which further increases the theoretical complexity. Most importantly, the flavor symmetry breaking sector introduces many undetermined parameters, significantly undermining the minimality and predictive power of the framework. By contrast, models based on modular symmetry provide a more economical and predictive alternative. In the modular symmetry framework, the introduction of flavon fields is not mandatory, and the breaking of flavor symmetry is achieved solely through the vacuum expectation value of the complex modulus \tau . Consequently, the number of free parameters is substantially reduced, resulting in a more constrained and predictive description of fermion masses and mixing 23 ; 55 ; 15 ; 22 ; 31 ; 63 ; 32 ; 36 ; 44 . Furthermore, modular symmetry is motivated by string compactifications. The most distinctive aspect of this framework is that the modular symmetry acts not only on the fields, such as leptons and the Higgs field, but also on the coupling constants themselves, which transform non-trivially as a modular form under the modular group. Table 1: The neutrino oscillation data used in the numerical analysis taken from NuFIT 6.1. The central values of the charged lepton mass ratios are taken from 21 ; 49 ; 67 . During the scan of the model parameter space, the uncertainties in these ratios as fixed at 0.1% of their respective central values 69 . Parameter best-fit \pm 1\sigma range (NH) best-fit \pm 1\sigma range (IH) 3\sigma range (NH) 3\sigma range (IH) \sin^{2}\theta_{12} 0.308^{+0.0067}_{-0.0066} 0.308^{+0.0067}_{-0.0066} 0.289-0.329 0.289-0.329 \sin^{2}\theta_{23} 0.470^{+0.017}_{-0.014} 0.550^{+0.013}_{-0.016} 0.435-0.584 0.439-0.584 \sin^{2}\theta_{13} 0.02248^{+0.00055}_{-0.00059} 0.02262^{+0.00057}_{-0.00056} 0.02064-0.02418 0.02093-0.02441 \Delta m^{2}_{3l}\times 10^{-3}\text{eV}^{2} 2.511^{+0.021}_{-0.020} -2.483^{+0.020}_{-0.020} 2.450-2.576 -2.547--2.421 \Delta m^{2}_{21}\times 10^{-5}\text{eV}^{2} 7.53^{+0.094}_{-0.10} 7.53^{+0.094}_{-0.10} 7.26-7.82 7.23-7.82 m_{e}/m_{\mu} 0.004737 0.004737 – – m_{\mu}/m_{\tau} 0.058823 0.058823 – – The framework introduced by Qu and Ding extends this idea to non-holomorphic modular symmetries, where Yukawa couplings with negative modular weights are allowed through polyharmonic Maaß forms 61 . Non-holomorphic modular symmetries have been studied by various authors in the context of different neutrino mass generation mechanisms, including the type-I 47 , type-II 53 , and type-III 60 seesaw mechanisms, and more 16 ; 35 ; 34 ; 18 ; 50 ; 38 ; 39 ; 37 ; 54 ; 56 ; 1 ; 26 ; 30 ; 51 ; 52 ; 70 ; 48 ; 66 ; 71 ; 41 . In modular invariant flavor models, the fixed points of the modular symmetry are special values of the complex modulus \tau that remain invariant under non-trivial modular transformations. When the modulus acquires a vacuum expectation value (VEV), the full modular symmetry is generally broken. However, at these fixed points, the symmetry breaking is incomplete and a subgroup of the original modular group remains unbroken. This surviving subgroup is referred to as the residual flavor symmetry. Each fixed point corresponds to a specific residual symmetry group, determined by the modular transformation that leaves \tau invariant. In the case of level-3 modular symmetry based on the A_{4} group, the fixed point \tau=i preserves a Z_{2} residual symmetry, while the fixed point \tau=e^{2\pi i/3} preserves a Z_{3} residual symmetry 17 ; 57 . These residual symmetries impose strong constraints on the allowed Yukawa couplings and mass matrices, leading to predictive structures for fermion masses and lepton mixing. In this work, we investigate the type-III seesaw mechanism within the framework of non-holomorphic modular symmetry. We focus on the complex modulus \tau in the vicinity of the modular fixed points, allowing for small deviations from the exact fixed-point values, which significantly reduces the number of free parameters in the framework. A comprehensive \chi^{2} analysis is performed to examine the compatibility of these constrained configurations with current neutrino oscillation data. We find that only a restricted set of modular fixed points, together with small deviations around them, can successfully reproduce the observed neutrino oscillation data, while the remaining fixed points are incompatible with current experimental constraints. The corresponding numerical results are presented and discussed in detail. The paper is organized as follows. In Section 3 , the model is presented, and the procedure for diagonalizing the active neutrino mass matrix is discussed. The numerical analysis and the corresponding results are given in Section 4 . Leptogenesis is addressed in Section 5 . Finally, the conclusions are presented in Section 6 . 2 Modular symmetry and fixed Points The modular symmetry can be interpreted as the origin of flavor symmetry. The modular transformation acts on the complex modulus \tau in the upper half plane through linear fractional transformations \tau\rightarrow\frac{a\tau+b}{c\tau+d},\qquad a,b,c,d\in\mathbb{Z},\quad ad-bc=1, (1) which form the projective group \mathrm{PSL}(2,\mathbb{Z})=\mathrm{SL}(2,\mathbb{Z})/\{\pm I\} . The fundamental domain \mathcal{F} of the modular group is defined by \mathcal{F}=\left\{\tau\in\mathbb{C}\,\big|\,\mathrm{Im}(\tau)>0,\ |\tau|\geq 1,\ |\mathrm{Re}(\tau)|\leq\tfrac{1}{2}\right\}. (2) The group is generated by two elements S:\tau\to-\frac{1}{\tau},\qquad T:\tau\to\tau+1, (3) satisfying S^{2}=(ST)^{3}=1 . A modular form Y_{r}^{(k)}(\tau) of weight k is a function of modulus \tau , transforming in the representation r of a finite modular group, that satisfies Y_{r}^{(k)}(\gamma\tau)=(c\tau+d)^{k}\,\rho_{r}(\gamma)\,Y_{r}^{(k)}(\tau). (4) On the other hand, a field \Phi with weight k and representation r also transforms as \Phi(\gamma\tau)=(c\tau+d)^{-k}\,\rho_{r}(\gamma)\,\Phi(\tau). (5) Then a Lagrangian is invariant under modular symmetry if all the terms are invariant under these transformations. 2.1 Fixed Points A point \tau_{0} is called a fixed point if it remains invariant under a nontrivial modular transformation \gamma_{0} , \gamma_{0}\tau_{0}=\tau_{0}. (6) Solving the fixed-point condition for a general transformation \gamma_{0}=\begin{pmatrix}a_{0}&b_{0}\\ c_{0}&d_{0}\end{pmatrix}, (7) leads to a quadratic equation for \tau_{0} . Requiring \tau_{0}\in\mathcal{F} restricts the trace of the transformation matrix to |a_{0}+d_{0}|<2 , which gives only a few nontrivial solutions. As a result, the fundamental domain contains four inequivalent fixed points: • S -invariant point \tau_{S}=i, (8) which is fixed under the transformation S . • ST - and TS -invariant points \tau_{ST}=-\frac{1}{2}+i\frac{\sqrt{3}}{2},\qquad\tau_{TS}=\frac{1}{2}+i\frac{\sqrt{3}}{2}, (9) which are related by the action of T . • T -invariant cusp \tau_{T}=i\infty. (10) Thus, only these four points have nontrivial stabilizers inside the fundamental domain. 2.2 Modular Forms at Fixed Points A modular form transforms as Eq. ( 4 ) under a modular symmetry. At a fixed point \tau_{0} , this relation gives \rho_{r}(\gamma_{0})\,Y_{r}(\tau_{0})=(c_{0}\tau_{0}+d_{0})^{-k}Y_{r}(\tau_{0}), (11) which shows that the modular forms at fixed points are eigenvectors of the representation matrix of the stabilizer transformation. If the modulus \tau takes one of these special values, the full modular symmetry is broken to a residual subgroup generated by the corresponding stabilizer ( S , ST , or T ). This residual symmetry constrains the structure of modular forms and is important in flavor model building. In our analysis, we consider several specific values of the modulus \tau . Among them, the point \tau=i lies inside the fundamental domain, while the values \tau=\frac{1+i}{2},\qquad\tau=\frac{3+i}{2},\qquad\tau=1,\qquad\tau=-1 do not belong to the fundamental domain but are related to special points through modular transformations. More precisely, these points are mapped into representatives inside the fundamental domain by elements of the modular group SL(2,\mathbb{Z}) . In particular, \tau=1 and \tau=-1 , although lying on the real axis, are fixed points of non-trivial modular transformations, namely T^{2}S and ST^{2} , respectively, and hence possess non-trivial stabilizers. The points \tau=\frac{1+i}{2} and \tau=\frac{3+i}{2} can be mapped into the fundamental domain by suitable combinations of the S and T generators. Since modular forms transform covariantly under these operations, the values of modular forms at these points are not independent but are determined by their values at the corresponding points inside the fundamental domain. Therefore, these \tau values are ‘special’ in the sense that they are related by modular transformations to points with enhanced symmetry (such as fixed points or cusps of the modular group), and consequently inherit symmetry properties that constrain the structure of modular forms evaluated at those points. We include these values in our study to examine their effects on the structure of modular forms and the resulting phenomenological predictions. 3 Model and Formalism We extend the SM particle content by introducing a hyperchargeless fermion triplet, which implements the type-III seesaw mechanism. The charge assignments under modular group A_{4} and modular weights( k_{I} ) for the model are shown in Table 2 . The model content is same as in Ref 60 . The triplet fermions \Sigma_{i} with i = 1,2,3, can be presented in SU(2) basis as \Sigma_{i}=\begin{pmatrix}\frac{\Sigma_{i}^{0}}{\sqrt{2}}&\Sigma_{i}^{+}\\ \Sigma_{i}^{-}&-\frac{\Sigma_{i}^{0}}{\sqrt{2}}\end{pmatrix}, (12) where \Sigma^{0} and \Sigma^{\pm} corresponds to neutral and charged fermions respectively. The modular invariant Lagrangian is given as \begin{split}-\mathcal{L}=\;&\alpha\,\bar{L}\,H\,e_{R}\,Y_{3}^{(-2)}+\beta\,\bar{L}\,H\,\mu_{R}\,Y_{3}^{(0)}+\gamma\,\bar{L}\,H\,\tau_{R}\,Y_{3}^{(0)}\\[5.0pt] &+g_{1}\,\bar{L}\,\Sigma_{i}\,H\,Y_{1}^{(-2)}+g_{2}\,(\bar{L}\,\Sigma_{i})_{\text{sym}}\,H\,Y_{3}^{(-2)}+g_{2}^{\prime}\,(\bar{L}\,\Sigma_{i})_{\text{asym}}\,H\,Y_{3}^{(-2)}\\[5.0pt] &+M_{0}\,Tr[\Sigma_{i}\,\Sigma_{i}]\,Y_{1}^{(-4)}+M^{\prime}\,Tr[\Sigma_{i}\,\Sigma_{i}]\,Y_{3}^{(-4)}+\text{H.C.}\end{split} (13) where the subscript sym(asym) indicates that A_{4} triplet is constructed symmetrically(anti-symmetrically) by triplets inside a bracket. The corresponding charged lepton mass matrix is given as M_{L}=\text{Diag}(\alpha,\beta,\gamma)\begin{pmatrix}Y_{31}^{(-2)}&Y_{33}^{(-2)}&Y_{32}^{(-2)}\\ Y_{32}^{(0)}&Y_{31}^{(0)}&Y_{33}^{(0)}\\ Y_{33}^{(0)}&Y_{32}^{(0)}&Y_{31}^{(0)}\end{pmatrix}v, (14) here v is the vev of the Higgs field. The charged lepton mass matrix M_{L} contains three real parameters \alpha,\beta and \gamma , which can be suitably chosen to reproduce the observed charged lepton masses. The diagonalization of M_{L} is given as U_{L}^{\dagger}M_{L}^{\dagger}M_{L}U_{L}=\text{Diag}{(|m_{e}|^{2},|m_{\mu}|^{2},|m_{\tau}|^{2})} . The second lines of the Lagrangian Eq. ( 13 ) induce a Dirac mass term between the SM neutrino and extra neutral fermion \Sigma^{0} . The corresponding Dirac mass matrix is given as M_{D}=v\begin{pmatrix}g_{1}Y_{1}^{(-2)}+2\frac{g_{2}}{3}Y_{31}^{(-2)}&(\frac{g_{2}^{\prime}}{2}-\frac{g_{2}}{3})Y_{33}^{(-2)}&-(\frac{g_{2}^{\prime}}{2}+\frac{g_{2}}{3})Y_{32}^{(-2)}\\ -(\frac{g_{2}^{\prime}}{2}+\frac{g_{2}}{3})Y_{33}^{(-2)}&2\frac{g_{2}}{3}Y_{32}^{(-2)}&g_{1}Y_{1}^{(-2)}+(\frac{g_{2}^{\prime}}{2}-\frac{g_{2}}{3})Y_{31}^{(-2)}\\ (\frac{g_{2}^{\prime}}{2}-\frac{g_{2}}{3})Y_{32}^{(-2)}&g_{1}Y_{1}^{(-2)}-(\frac{g_{2}^{\prime}}{2}+\frac{g_{2}}{3})Y_{31}^{(-2)}&2\frac{g_{2}}{3}Y_{33}^{(-2)}\end{pmatrix}. (15) Table 2: Field content and charge assignments of Type-III seesaw mechanism under A_{4} group and modular weights. \bar{L} e_{R} \mu_{R} \tau_{R} \Sigma_{i} H SU(2) 2 1 1 1 3 2 A_{4} 3 1 1^{\prime\prime} 1^{\prime} 3 1 k_{I} 0 -2 0 0 -2 0 The invariant modular Lagrangian for the Majorana term is given as -L_{\Sigma}=M_{0}Tr[\Sigma_{i}\Sigma_{i}]Y_{1}^{(-4)}+M^{\prime}Tr[\Sigma_{i}\Sigma_{i}]Y_{3}^{(-4)}+\text{H.C.} (16) The right-handed Majorana neutrino mass matrix is given as M_{\Sigma}=\begin{pmatrix}M_{0}Y_{1}^{(-4)}+2M^{\prime}Y_{31}^{(-4)}&-M^{\prime}Y_{33}^{(-4)}&-M^{\prime}Y_{32}^{(-4)}\\ -M^{\prime}Y_{33}^{(-4)}&2M^{\prime}Y_{32}^{(-4)}&M_{0}Y_{1}^{(-4)}-M^{\prime}Y_{31}^{(-4)}\\ -M^{\prime}Y_{32}^{(-4)}&M_{0}Y_{1}^{(-4)}-M^{\prime}Y_{31}^{(-4)}&2M^{\prime}Y_{33}^{(-4)}\end{pmatrix}. (17) The mass matrix M_{\Sigma} , can be diagonalized by using the unitary matrix, such that, U_{R} as U_{R}^{T}M_{\Sigma}U_{R}=\text{diag}(M_{\Sigma 1},M_{\Sigma 2},M_{\Sigma 3}) . Finally, the active neutrino mass matrix is obtained by the Type-III seesaw as follows M_{\nu}=-M_{D}M_{\Sigma}^{-1}M_{D}^{T}. (18) The neutrino mass matrix given by Eqn. ( 18 ) is diagonalized using the relation U_{\nu}^{T}M_{\nu}U_{\nu}=\text{diag}(m_{\nu_{1}},m_{\nu_{2}},m_{\nu_{3}}) . The mixing matrix U_{\rm PMNS} = U_{L}^{\dagger}U_{\nu} , since the charged lepton mass matrix is not diagonal in the flavor basis. Now, the mixing angle can be extracted from U_{\rm PMNS} as \sin^{2}\theta_{13}=|U_{13}|^{2},\quad\sin^{2}\theta_{12}=\frac{|U_{12}|^{2}}{1-|U_{13}|^{2}},\quad{\rm and}\quad\sin^{2}\theta_{23}=\frac{|U_{23}|^{2}}{1-|U_{13}|^{2}}. (19) The Dirac CP -violating phase( \delta_{CP} ) can be determined from the PMNS matrix elements through the Jarlskog invariant, defined as J_{CP}=\text{Im}\left[U_{11}U_{22}U^{*}_{12}U^{*}_{21}\right]=s_{23}c_{23}s_{12}c_{12}s_{13}c_{13}^{2}\sin\delta_{CP}, (20) where s_{ij}=\sin\theta_{ij} and c_{ij}=\cos\theta_{ij} . In addition to \delta_{CP} , the Majorana CP phases can be investigated using the PMNS matrix elements as I_{1}=\text{Im}\left[U_{11}^{*}U_{12}\right]=c_{12}s_{12}c_{13}^{2}\sin\left(\frac{\alpha_{21}}{2}\right), (21) I_{2}=\text{Im}\left[U_{11}^{*}U_{13}\right]=c_{12}s_{13}c_{13}\sin\left(\frac{\alpha_{31}}{2}-\delta_{CP}\right). (22) 4 Numerical Analysis and Discussion In this section, we carry out numerical analysis for the Type-III seesaw mechanism within the framework of non holomorphic modular symmetry, considering its behavior at the fixed points. To examine the consistency of our model with current experimental data, we have performed a \chi^{2} analysis. The chi-square function used in analysis is shown as \chi^{2}=\sum_{i=1}^{7}\left(\frac{P_{i}-P_{i}^{0}}{\sigma_{i}}\right)^{2}, (23) here, P_{i} denotes the values predicted by the model, while P_{i}^{0} represents the best-fit values of the neutrino observables obtained from the NUFit 6.1 analysis summarized in Table 1 . The \sigma_{i} corresponds to the 1\sigma experimental uncertainty associated with each observable. In this work, we consider seven observables: the three leptonic mixing angles ( \sin^{2}\theta_{13},~\sin^{2}\theta_{12},~\sin^{2}\theta_{23} ), the two neutrino mass-squared differences ( \Delta m_{21}^{2} and \Delta m_{31}^{2} ), and two charged-lepton mass ratios ( m_{e}/m_{\mu} and m_{\mu}/m_{\tau} ). The Dirac CP phase ( \delta_{CP} ) is not included as an input parameter due to its comparatively weak experimental constraints. The parameter space has been explored using a Markov Chain Monte Carlo (MCMC) technique, and a total of 10^{9} sample points have been generated using a Python-based implementation. In our analysis, the independent free parameters of the model are \alpha/\beta , \gamma/\beta , g_{1} , g_{2} , g_{11} , M_{0} , m_{1} , as the small expansion parameter \epsilon and the phase \phi , over which we perform a systematic scan. Table 3: The best-fit values for the neutrino oscillation parameters obtained from the \chi^{2} analysis for NH. \chi_{\rm min}^{2} \sin^{2}\theta_{12} \sin^{2}\theta_{23} \sin^{2}\theta_{13} \delta_{CP}(^{\circ}) \Delta m^{2}_{21}(\text{eV}^{2}) \Delta m^{2}_{31}(\text{eV}^{2}) \Sigma_{i}\text{(eV)} {\rm Re}[\tau] {\rm Im}[\tau] \epsilon \phi \frac{3+i}{2} 0.17 0.307 0.466 0.022 126.73^{o} 7.6\times 10^{-5} 2.51\times 10^{-3} 0.099 1.389 0.533 0.073 0.80\pi 1 0.14 0.307 0.473 0.022 108.20^{\circ} 7.5\times 10^{-5} 2.50\times 10^{-3} 0.112 0.958 0.034 0.0542 0.77\pi -1 0.20 0.308 0.474 0.022 252.22^{\circ} 7.5\times 10^{-5} 2.50\times 10^{-3} 0.112 - 0.958 0.035 0.0540 -0.77\pi Table 4: The best-fit values for the neutrino oscillation parameters obtained from the \chi^{2} analysis for IH. \chi_{\rm min}^{2} \sin^{2}\theta_{12} \sin^{2}\theta_{23} \sin^{2}\theta_{13} \delta_{CP}(^{\circ}) \Delta m^{2}_{21}(\text{eV}^{2}) \Delta m^{2}_{31}(\text{eV}^{2}) \Sigma_{i}\text{(eV)} \rm Re[\tau] \rm Im[\tau] \epsilon \phi \frac{3+i}{2} 1.08 0.310 0.545 0.022 299.91^{o} 7.5\times 10^{-5} -2.48\times 10^{-3} 0.139 1.380 0.492 0.040 -0.92\pi 1 0.44 0.306 0.548 0.022 313.63^{\circ} 7.5\times 10^{-5} -2.48\times 10^{-3} 0.140 0.923 0.022 0.079 0.91\pi -1 0.08 0.308 0.549 0.022 35.67^{\circ} 7.5\times 10^{-5} -2.48\times 10^{-3} 0.172 -0.924 0.019 0.078 0.92\pi We have analyzed the model in the vicinity of the fixed points. However, only a subset of these fixed points is consistent with the current neutrino oscillation data. We present the correlation plots corresponding to the fixed points that are compatible with the experimental observations. The correlations are shown for the parameter space satisfying \chi^{2}<10 , where the star ( \star ) denotes the best-fit value. For the fixed point \tau_{\rm fixed} , we performed a detailed scan of the nearby parameter space as \tau=\tau_{\rm fixed}(1+\epsilon e^{i\phi}) by varying the phase \phi in the range (-\pi,\pi) and the parameter \epsilon in the range (0,0.1) . The model predictions were then tested against the existing neutrino oscillation data. In the following, we summarize our results for each fixed point that can accommodate the observed data. 4.1 At nearby \dfrac{3+i}{2} We find a minimum \chi^{2} value of 0.17 for the nearby region of fixed point \frac{3+i}{2} , and the corresponding best-fit values are listed in Table 3 . Fig. 1 (a), 1 (b) and 1 (c) illustrate the quality of the fit to the neutrino oscillation observables. All the three mixing angles are compatible with current neutrino oscillation data at 1\sigma level. The correlation between the CP invariants I_{1} and I_{2} is shown in Fig. 1 (d). Fig. 1 (e) shows the correlation between the real and imaginary parts of the complex modulus \tau , illustrating the deviation from the selected fixed point. The best-fit value is located at \rm Re[\tau]=1.389 and \rm Im[\tau]=0.533 , and is marked by an star ( \star ) in the figure. The exact fixed point is indicated in the figure by a red diamond. The correlation between the Dirac CP phase \delta_{CP} and the atmospheric mixing angle is shown in Fig. 1 (f), from which we observe that the model predicts the best-fit value of \sin^{2}\theta_{23} in the first octant. This prediction can be tested in future long baseline neutrino oscillation experiments(LBL) 62 ; 4 ; 2 . The predicted range of the Dirac CP phase is consistent with the current global-fit results. Fig. 1 (g) shows the correlation between Jarlskog invariant and \delta_{CP} . The correlation between the effective Majorana mass m_{\beta\beta} and the lightest neutrino mass is presented in Fig. 1 (h). The predicted values of m_{\beta\beta} are compatible with the KamLand 3 and current nEXO sensitivity 6 , and the lightest neutrino mass( m_{1} ) lies within the detectable range of KaTRIN( <0.45eV at 90% Confidence level(CL)) 9 and the Project 8 experiment 20 . Fig. 1 (i) shows the correlation between m_{\beta\beta} and the sum of neutrino masses( \Sigma_{i} ). The predicted sum of neutrino masses is consistent with the current cosmological bound (<0.12eV at 95% CL) 7 . The best-fit value of the sum of neutrino masses is \Sigma_{i}=0.099\,\text{eV} , corresponding to a minimum chi-square value \chi^{2}_{\min}=0.17 . The model predicts an allowed range for the sum of neutrino masses of (0.092\text{-}0.119)\,\text{eV} . For inverted hierarchy, neutrino observables are compatible with the current experimental data with \chi^{2}_{min}=1.08 . The sum of neutrino masses exceeds the cosmological bound as model predicts the \Sigma_{i}=0.139eV . Figure 1: Correlation between mixing angles, real and imaginary part of \tau , Jarlskog invaraint , Dirac-type CP phase, CP invariants are shown. Additionally effective majorana mass with respect to lightest neutrino mass and sum of neutrino mass is also presented with minimum chi square at 0.072 for nearby fixed point \tau=\frac{3+i}{2} for NH 4.2 At nearby fixed point 1 We also obtain a chi-square minimum in the vicinity of the fixed point \tau=1 . In this region, the minimum value of \chi^{2} is 0.14 , and the corresponding best-fit values are listed in Table 3 . Fig. 2 (a), 2 (b) and 2 (c) shows that all three leptonic mixing angles predicted by the model are compatible with the current experimental data at 1 \sigma level. In particular, the atmospheric mixing angle \theta_{23} is clearly predicted to lie in the first octant. These predictions can be tested in future LBL neutrino experiments 62 ; 4 ; 2 . The correlations among the CP invariants( I_{1}~\text{and}~I_{2} ) are displayed in Fig. 2 (d). Fig. 2 (e) illustrates the deviation of the real and imaginary parts of the complex modulus \tau from the fixed point \tau=1 with best fit at \rm Re[\tau]=0.958 and \rm Im[\tau]=0.034 corresponding to \chi^{2}_{min}=0.14 , and is marked by an star ( \star ) in the figure. The exact fixed point is indicated in the figure by a red diamond. The correlation between the Dirac CP phase \delta_{\rm CP} and \sin^{2}\theta_{23} is shown in Fig. 2 (f), which indicates that the model predicts CP violation, with \delta_{\rm CP} lying predominantly in the second quadrant. The correlation between the Jarlskog invariant J_{\rm CP} and \delta_{\rm CP} is also presented in Fig. 2 (g). The correlation involving the m_{\beta\beta} with m_{1} , is shown in Fig. 2 (h). The predicted values of m_{\beta\beta} are compatible with the sensitivity of the nEXO experiment 6 , while the m_{1} lies within the projected sensitivity of the Project 8 experiment 20 . The correlation between m_{\beta\beta} and the sum of neutrino masses( \Sigma_{i} ) is also shown in Fig. 2 (i). The best-fit value of the sum of neutrino masses obtained in our analysis is compatible with the current cosmological upper bound 7 . We obtain a best-fit value of the sum of neutrino masses \Sigma_{i}=0.112\,\text{eV} , corresponding to \chi^{2}_{\min}=0.14 . Allowing a wider parameter space defined by \chi^{2}<10 , the predicted range for the sum of neutrino masses is (0.105\text{-}0.133)\,\text{eV} . The IH is not allowed in this model for such selection of fixed points at predict the \chi^{2}_{min}=0.44 . The sum of neutrino masses is 0.140eV corresponding to \chi^{2}_{min} , which shows incompatibility with cosmological bound provided by Planck’s data. The relevant neutrino parameters for IH are summarized in Table. 4 Figure 2: Correlation between mixing angles, real and imaginary part of \tau , Jarlskog invariant, Dirac-type CP phase, CP invariants are shown. Additionally effective majorana mass with respect to lightest neutrino mass and sum of neutrino mass is also presented with minimum chi square at 0.14 for nearby fixed point \tau=1 4.3 At nearby fixed point -1 We also obtain a chi-square minimum in the vicinity of the fixed point \tau=-1 . The minimum value of the chi-square function is \chi^{2}_{\rm min}=0.20 , and the corresponding best-fit values are listed in Table 3 . Fig. 3 (a), 3 (b) and 3 (c) shows that the model predicts all three leptonic mixing angles in good agreement with the current experimental data. In particular, the atmospheric mixing angle \sin^{2}\theta_{23} is predicted to lie in the first octant, which can be tested in future LBL neutrino oscillation experiments 62 ; 4 ; 2 . The correlations among the CP invariants are presented in Fig. 3 (d).Fig. 3 (e) illustrates the deviation of the real and imaginary parts of the complex modulus \tau from the fixed point. The best–fit point is obtained at \rm Re[\tau]=-0.958 and \rm Im[\tau]=0.035 , corresponding to \chi^{2}_{\min}=0.20 . The exact fixed point is indicated in the figure by a red diamond. The correlation between the Dirac CP phase \delta_{\rm CP} and \sin^{2}\theta_{23} is displayed in Fig. 3 (f), from which one can clearly see that the model predicts strong CP violation together with a preference for the first octant of \theta_{23} . The correlation between the Jarlskog invariant J_{\rm CP} and \delta_{\rm CP} is shown in Fig. 3 (g). The m_{\beta\beta} is plotted as a function of the lightest neutrino mass in Fig. 3 (h). The predicted values of m_{\beta\beta} are consistent with the current nEXO bound 6 , while m_{1} lies within the projected sensitivity of the Project 8 experiment 20 . The correlation between m_{\beta\beta} and the sum of neutrino masses \Sigma_{i} is also shown in Fig. 3 (i). These predictions are consistent with the current cosmological bound 7 , with a best-fit value of the sum of neutrino masses \Sigma_{i}=0.112\,\text{eV} corresponding to a minimum chi-square value \chi^{2}_{\min}=0.20 . However, tension with the DESI bound( <0.072eV at 95% CL) is observed 5 . The predicted range of the sum of neutrino masses is (0.106\text{-}0.160)\,\text{eV} . The IH is not compatible with the choice of this model and this nearby fixed point as it predict \chi_{min}^{2}=0.089 . The sum of neutrino mass predicted by the model is \Sigma_{i}=0.172eV , which is not compatible with the cosmological bound. The relevant neutrino parameters for IH are summarized in Table 4 . Although the concept of modular fixed points is well established, their role in constraining leptogenesis within the present framework is non-trivial. In particular, they provide predictive benchmark regions where the heavy fermion spectrum and the CP structure are tightly correlated. While the neutrino oscillation observables are consistent with current experimental bounds, their significance in this framework extends beyond a purely low-energy description. At the fixed points, the Yukawa couplings entering the Type-III seesaw mechanism are strongly constrained by modular symmetry and neutrino data. These same couplings also govern the decay properties and CP asymmetries of the heavy fermion triplets, thereby establishing a direct connection between low-energy neutrino phenomenology and the dynamics of leptogenesis in the early Universe. Figure 3: Correlation between mixing angles, real and imaginary part of \tau , Jarlskog invariant, Dirac-type CP phase, CP invariants are shown. Additionally effective majorana mass with respect to lightest neutrino mass and sum of neutrino mass is also presented with minimum chi square at 0.10 for nearby fixed point \tau=-1 5 Leptogenesis The observed baryon asymmetry of the Universe can be explained by the mechanism of leptogenesis, which operates in seesaw models through the decays of heavy right-handed neutrinos. When the temperature of the universe falls below the mass of the lightest heavy state, its decay occurs out of thermal equilibrium and generates a lepton asymmetry through CP-violating interactions. This lepton asymmetry is subsequently reprocessed into a baryon asymmetry by non-perturbative electroweak sphaleron transitions that violate baryon and lepton numbers while conserving B-L . The generation of such an asymmetry requires the fulfillment of the three Sakharov conditions: baryon number violation, C and CP violation, and departure from thermal equilibrium. In the Standard Model, baryon number violation arises at high temperatures due to sphaleron processes, while C and CP violation originate from weak interactions and complex Yukawa couplings. However, the electroweak phase transition within the Standard Model is a crossover rather than a strong first-order transition, and therefore does not provide sufficient departure from thermal equilibrium. As a result, the Standard Model alone cannot account for the observed baryon asymmetry of the Universe. In modular symmetric frameworks, CP violation has a geometric origin and arises from the imaginary part of the complex modulus \tau . At specific modular fixed points, both the real and imaginary parts of \tau are fixed, which uniquely determines the structure of the Yukawa couplings. In this work, the required CP asymmetry is generated through the out-of-equilibrium decays of the lightest fermion triplet, whose decay properties are fully governed by the modular fixed-point values of \tau . The CP asymmetry generated by the decay of lightest fermion triplet is given as \epsilon_{i}=-\sum_{j=2,3}\frac{3}{2}\frac{M_{\Sigma_{i}}}{M_{\Sigma_{j}}}\frac{\Gamma_{j}}{M_{\Sigma_{j}}}I_{j}\frac{V_{j}-2S_{j}}{3}, (24) where, I_{j}=\frac{Im[(\tilde{Y}^{\dagger}\tilde{Y})_{ij}^{2}]}{(\tilde{Y}^{\dagger}\tilde{Y})_{ii}(\tilde{Y}^{\dagger}\tilde{Y})_{jj}}, (25) where, \tilde{Y}=YU_{L}U_{R} and Y=\frac{M_{D}}{v} and V_{j} and S_{j} are the loop factors associated with the vertex and self-energy corrections, respectively, given by V_{j}=\frac{M_{\Sigma_{j}}^{2}(M_{\Sigma_{j}}^{2}-M_{\Sigma_{i}}^{2})}{(M_{\Sigma_{j}}^{2}-M_{\Sigma_{i}}^{2})^{2}+M_{\Sigma_{i}}^{2}\Gamma_{\Sigma_{j}}^{2}}, (26) S_{j}=2\frac{M_{\Sigma_{j}}^{2}}{M_{\Sigma_{i}}^{2}}\left(\left(1+\frac{M_{\Sigma_{j}}^{2}}{M_{\Sigma_{i}}^{2}}\right)\ln\left(1+\frac{M_{\Sigma_{j}}^{2}}{M_{\Sigma_{i}}^{2}}\right)-1\right). (27) In the hierarchical limits( M_{\Sigma_{1}}