Geometry- and topology-controlled synchronization phase transition on manifolds Preprint: APS/123-QED Yang Tian Abstract In this work, we explore how the geometry and topology of the underlying manifold shape the synchronization phase transition of a system. To do so, we extend the Kuramoto-Sakaguchi model from spheres to compact, connected, orientable, and homogeneous Riemannian manifolds of arbitrary dimension. Starting from the mean-field kinetic equation on the manifold, we derive a local response equation for the order parameter near the incoherent state and separate the geometric and topological contributions to the phase transition out of the incoherent state. The manifold geometry determines a coefficient κ ⁡ ( M ) \kappa\left(M\right) to control the critical coupling for the linear loss of stability of the incoherent state. The manifold topology constrains the cubic term of the response equation through the Euler characteristic χ ⁡ ( M ) \chi\left(M\right) . Under a local sign condition on the cubic term, topology does not allow a generic continuous or tricritical synchronization phase transition to occur when χ ⁡ ( M ) ≠ 0 \chi\left(M\right)\neq 0 , and it imposes a non-zero net defect charge on the incipient ordered texture. When an additional local stabilization condition holds in that nonzero-Euler class, topology further selects a discontinuous phase transition. When χ ⁡ ( M ) = 0 \chi\left(M\right)=0 , topology does not impose that obstruction, so continuous, discontinuous, and tricritical local branches are all allowed. We verify these findings on representative families including hyperspheres, equal even-sphere products, complex Grassmannians, complex projective spaces, flat tori, real Stiefel manifolds, rotation groups, and unitary groups. Our framework recovers the classical hyperspherical parity law and extends it to a broad class of non-spherical state spaces. It therefore identifies the geometric origin of the linear instability threshold and the topological origin of the accessible phase transition scenarios in diverse synchronization phenomena.  I Introduction The Kuramoto model serves as a prototypical framework for investigating low-dimensional synchronization phenomena 41 ; 63 ; 62 ; 7 . Its generalized form, the Kuramoto-Sakaguchi model, also plays a crucial role in studying both synchronization and asynchronization in low-dimensional systems 67 ; 63 ; 62 . However, to accurately describe a broader range of biological, chemical, and physical systems 10 ; 49 ; 72 , it is necessary to consider high-dimensional settings ( D\geq 3 ), in which the original low-dimensional formulations ( D\leq 2 ) of the Kuramoto model and the Kuramoto-Sakaguchi model become inadequate 13 ; 46 ; 75 . Moreover, the phase space of a high-dimensional system need not be a standard D -dimensional sphere. In that case, high-dimensional extensions built specifically on the hypersphere may fail to represent the underlying state space 53 ; 71 ; 24 ; 12 ; 17 . In this study, we extend the Kuramoto-Sakaguchi model to compact, connected, orientable, and homogeneous D -dimensional Riemannian manifolds, which may possess non-trivial topology or an arbitrary number of holes 2 . This class already contains the principal geometric examples relevant to synchronization, including spheres, flat tori, Stiefel manifolds, rotation groups, and unitary groups 13 ; 53 ; 71 ; 24 ; 20 ; 21 ; 57 ; 19 ; 18 . Related Lohe-type and unitary-group models provide a complementary matrix-valued route to manifold synchronization 24 ; 28 ; 29 ; 38 ; 39 ; 30 ; 26 ; 25 ; 31 ; 66 ; 48 ; 27 . The original Kuramoto model, the original Kuramoto-Sakaguchi model, and the generalized Kuramoto model on the hypersphere all serve as special cases of our extended model. Figure. 1: Schematic summary of the present work. Starting from the generalized Kuramoto-Sakaguchi dynamics on a compact homogeneous manifold, we derive the response equation of the order parameter near the incoherent state. The linear term carries the geometric coefficient \kappa\left(M\right) , which fixes the critical coupling K_{c} for the linear loss of stability of the incoherent state. The nonlinear term carries the topological constraint through the Euler characteristic \chi\left(M\right) . When \chi\left(M\right)\neq 0 , topology does not allow generic continuous or tricritical local phase transitions to occur and enforces a non-zero net defect charge on the incipient ordered texture. If the additional local stabilization condition \Lambda_{5}>0 also holds in that non-zero-Euler class, topology further selects a discontinuous phase transition. When \chi\left(M\right)=0 , topology removes that obstruction, and continuous, discontinuous, and tricritical local phase transitions all remain allowed. Our analysis yields three main conclusions and Fig. 1 summarizes how these conclusions are connected within a unified picture. First, for a fixed embedding and order-parameter sector, the manifold geometry controls the linear instability threshold of the incoherent state. In the linearized response equation for the order-parameter perturbation \delta_{r} , the averaged tangent projection of the chosen embedding sector determines the coefficient \kappa\left(M\right) , and this coefficient fixes the critical coupling K_{c} at which the incoherent state first loses linear stability. Second, the manifold topology controls which local phase transition scenarios are allowed. In the cubic term of the one-mode reduced amplitude equation, the Euler characteristic 56 constrains the sign-accessibility of the cubic coefficient. Under the locality conditions of Appendix D and the sign condition stated in Appendix E , topology does not allow generic continuous or tricritical phase transitions to occur when \chi\left(M\right)\neq 0 , and it imposes a non-zero net defect charge on the onset texture. If the additional local stabilization condition \Lambda_{5}>0 also holds in that nonzero-Euler class, topology further selects a discontinuous transition. When \chi\left(M\right)=0 , topology does not impose that obstruction, so continuous, discontinuous, and tricritical local branches all remain allowed. Here the sign condition means that the local cubic density near each isolated zero of the critical tangent field contributes with the opposite sign of the local index and with a positive weight, while the regular contribution away from the zeros remains smaller than the total indexed contribution. Third, these geometric and topological constraints control physical properties that are directly relevant to statistical physics. They determine the linear instability threshold, the phase transition type, the possible presence of hysteresis, and the defect content of the incipient ordered texture, and we verify these conclusions on representative manifolds, including hyperspheres, equal even-sphere products, complex Grassmannians, complex projective spaces, flat tori, real Stiefel manifolds, rotation groups, and unitary groups 18 ; 34 . The present framework also provides a basis for several further statistical-physics problems on high-dimensional state spaces. It can be used to study finite-size critical fluctuations near topology-conditioned onset, defect kinetics and charge balance in the emerging ordered texture, metastability and noise-induced switching on the discontinuous side, and nonequilibrium hysteresis under slow or fast parameter ramps. It also opens a route to systematic comparisons among multi-angle oscillators, matrix synchronization models, and other manifold-valued oscillator systems within a common geometric and topological language. In this sense, the theory identifies what information about synchronization onset is fixed by geometry, what information is constrained by topology, and which physical properties remain to be selected by the analytic structure of the underlying model. II General model on the manifold II.1 Geometric setting In this work, we consider a smooth, connected, compact, orientable, and homogeneous Riemannian manifold \left(M,g\right) of dimension D without boundary. The state of every oscillator i is defined on this manifold, \sigma_{i}\in M . The Riemannian metric g induces the Levi-Civita connection \nabla_{M} and the volume measure \mu 43 ; 2 . For any \sigma_{i}\in M , we denote by T_{\sigma_{i}}M the tangent space at \sigma_{i} , equipped with the inner product \langle\cdot,\cdot\rangle_{g} and the norm \|\cdot\|_{g} 43 . According to Nash’s embedding theorem 58 ; 42 , there exists an isometric embedding F_{0}:\left(M,g\right)\hookrightarrow\left(\mathbb{R}^{D_{0}},\langle\cdot,\cdot\rangle\right) . In this work, we define a smooth embedding \displaystyle F:M\hookrightarrow\mathbb{R}^{D_{a}},\;\;\;D_{a}\geq D_{0} (1) and identify M with its image F(M)\subset\mathbb{R}^{D_{a}} . The differential \mathsf{d}F_{\sigma_{i}}:T_{\sigma_{i}}M\rightarrow\mathbb{R}^{D_{a}} is injective for each \sigma_{i}\in M . In some special cases (e.g., the hypersphere M=S^{D} ), we additionally set |F\left(\sigma_{i}\right)|=1 for all \sigma_{i}\in M such that F\left(M\right) lies on the unit sphere. Through the embedding, we realize each tangent space T_{\sigma_{i}}M as a linear subspace of \mathbb{R}^{D_{a}} . We denote \displaystyle\mathsf{P}_{\sigma_{i}}^{\perp}:\mathbb{R}^{D_{a}}\to T_{\sigma_{i}}M (2) as the orthogonal projection with respect to the Euclidean inner product 43 . This projection ensures that all vector fields defining the dynamics remain tangent to the manifold M . The transport formulation introduced below still makes sense on a general compact orientable manifold, while the homogeneous assumption is used when we reduce the averaged geometric operator to a scalar factor in Sec. III.2 . Table 1: Representative special cases of the general Kuramoto-Sakaguchi model Eqs. ( 3 ) and ( 5 ). In all the cases, the state of oscillator i is denoted by \sigma_{i}\in M , where M is a smooth compact Riemannian manifold. F:M\hookrightarrow\mathbb{R}^{D_{a}} is a fixed smooth embedding into an ambient Euclidean space \mathbb{R}^{D_{a}} . The coupling term is \Gamma\left(\sigma_{i},\sigma_{j};\alpha\right)=\mathsf{P}^{\perp}_{\sigma_{i}}\left[\left(I-\alpha A\right)F\left(\sigma_{j}\right)\right] , where \mathsf{P}^{\perp}_{\sigma_{i}} denotes the orthogonal projection from \mathbb{R}^{D_{a}} onto the tangent space T_{\sigma_{i}}M , A\in\mathfrak{so}\left(D_{a}\right) is a fixed skew-symmetric matrix representing a linearized generator of rotations in the embedding space, and \alpha\in\mathbb{R} is a scalar phase-lag parameter. In the table, each row corresponds to a particular choice of M , F and A (e.g., M=S^{1} with F\left(\sigma\right)=\left(\cos\sigma,\sin\sigma\right) and A=0 in the first row, or M=S^{D-1} with F\left(\sigma_{i}\right)=\sigma_{i} and A\in\mathfrak{so}\left(D_{a}\right) in the fourth row), which reproduces a special Kuramoto-type model proposed in previous studies 63 ; 62 ; 13 ; 46 ; 75 ; 12 ; 17 ; 53 ; 52 ; 71 ; 48 ; 27 ; 9 ; 69 . Please see Appendix B for the detailed definitions of all these special cases. Their associated mathematical notions are not elaborated in the main text since they are irrelevant to our subsequent analysis. Model M F Phase-lag Kuramoto on S^{1} S^{1} (\cos\sigma,\sin\sigma) A=0 , \alpha=0 Kuramoto-Sakaguchi on S^{1} S^{1} \left(\cos\sigma,\sin\sigma\right) A=J , small |\alpha| Kuramoto on S^{D-1} S^{D-1} Inclusion F\left(\sigma\right)=\sigma A=0 , \alpha=0 Frustrated Kuramoto on S^{D-1} S^{D-1} F\left(\sigma_{i}\right)=\sigma_{i} A\in\mathfrak{so}(D) Vector-phase Kuramoto on \mathbb{T}^{d} \mathbb{T}^{d} Product of S^{1} embeddings Block-diagonal A Kuramoto on Stiefel/rotation manifolds \mathrm{St}\left(p,n\right) , \mathrm{SO}\left(n\right) Canonical matrix embedding A acts by BX or XB Lohe/unitary Kuramoto \mathrm{U}\left(d\right) , \mathrm{SU}\left(d\right) F\left(U\right)=U in \mathbb{C}^{d\times d} A in \mathfrak{u}\left(d\right) Network-distributed Kuramoto Any of the above M Corresponding F K\to K_{ij} , same A II.2 General model in discrete form Based on the definitions presented above, we first introduce our general model in its discrete form. The Kuramoto–Sakaguchi model on the manifold is written as \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\sigma_{i}=V_{i}\left(\sigma_{i}\right)+\frac{K}{N}\sum_{j=1}^{N}\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right), (3) where K denotes the coupling strength, N is the number of oscillators, and \alpha denotes the phase-lag effect. Each V_{i} is a smooth tangent vector field of oscillator i that satisfies \displaystyle\nabla_{M}\cdot V_{i}=0, (4) which is the natural condition ensuring that the spatially uniform incoherent state used below remains stationary under the intrinsic drift. We define the function \Gamma as \displaystyle\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right)=\mathsf{P}_{\sigma_{i}}^{\perp}\left[\left(I-\alpha A\right)F\left(\sigma_{j}\right)\right], (5) in which \mathsf{P}_{\sigma_{i}}^{\perp} maps any vector in the ambient space \mathbb{R}^{D_{a}} to the tangent space of M with respect to \sigma_{i} . The function F isometrically embeds oscillator states on M into the ambient space \mathbb{R}^{D_{a}} to support the synchronization analysis in an Euclidean space. The anti-symmetric operator A is used to describe the non-reciprocal coupling caused by phase lags, whose strength is measured by \alpha . Specifically, I-\alpha A is the first order approximation of the rotation operator \exp\left(\alpha A\right) . This operator creates local rotations to break inversion symmetry when |\alpha|>0 , which models phase frustration in analogy with the classic Kuramoto-Sakaguchi coupling on the circle 67 . In Eq. ( 5 ), \mathsf{P}_{\sigma_{i}}^{\perp}F\left(\sigma_{j}\right) enforces synchronization among oscillators while -\alpha\mathsf{P}_{\sigma_{i}}^{\perp}AF\left(\sigma_{j}\right) imposes asynchronization. The action of \mathsf{P}_{\sigma_{i}}^{\perp} ensures that the change in oscillator state \sigma_{i} remains confined to the tangent space, irrespective of whether the evolution of \sigma_{i} is governed by synchronizing or desynchronizing interactions. To analyze the global state of the system, the order parameter of the system is defined as \displaystyle r\left(t\right)=\frac{1}{N}\sum_{i=1}^{N}F\left(\sigma_{i}\right), (6) which is the empirical mean of the embedded states F\left(\sigma_{i}\right) in the ambient Euclidean space 41 ; 67 ; 63 ; 62 . The particular choice of embedding F determines which geometric features of the manifold are probed by the order parameter. In the classical examples, F is an isometric embedding into the unit sphere, so that |r\left(t\right)|\in\left[0,1\right] quantifies the degree of synchronization. As |r| approaches 0 , the system is in an asynchronization phase. As |r| approaches 1 , the system is in a synchronization phase. II.3 Connection to existing models For better conceptual clarity, we now explain the connection between the abstract model presented above and existing concrete models. In a special case where \left(M,g\right) reduces to a standard sphere S^{D-1}\subset\mathbb{R}^{D} , we actually require D_{a}=D , F\left(\sigma_{i}\right)=\sigma_{i} , and \|\sigma_{i}\|=1 (i.e., on the unit sphere). Meanwhile, the projection operator reduces to \mathsf{P}_{\sigma_{i}}^{\perp}=\mathbf{I}-\sigma_{i}\sigma_{i}^{\top} due to changes on the Riemannian metric. Moreover, the natural frequency field V_{i} reduces to the generator of rotation \Omega_{i} such that V_{i}\left(\sigma_{i}\right)\rightarrow\Omega_{i}\sigma_{i} . These changes enable us to rewrite Eqs. ( 3 ) and ( 5 ) as \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\sigma_{i}=\Omega_{i}\sigma_{i}+ \displaystyle\frac{K}{N}\sum_{j=1}^{N}\left[\sigma_{j}-\left(\sigma_{i}\cdot\sigma_{j}\right)\sigma_{i}-\alpha\left(A\sigma_{j}-\left(\sigma_{i}\cdot A\sigma_{j}\right)\sigma_{i}\right)\right], (7) which is the extend Kuramoto–Sakaguchi model on the D -dimensional hypersphere. If we further define \alpha=0 , there is no phase-lag effect and we can obtain the extend Kuramoto model on the D -dimensional hypersphere \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\sigma_{i}=\Omega_{i}\sigma_{i}+\frac{K}{N}\sum_{j=1}^{N}\left[\sigma_{j}-\left(\sigma_{i}\cdot\sigma_{j}\right)\sigma_{i}\right], (8) which contains only synchronization forces. The gradient flow structure under this condition is elaborated in Appendix A . When D=2 , Eqs. ( 7 - 8 ) reduce to the original Kuramoto–Sakaguchi model and the original Kuramoto model, respectively. In more general cases, the manifold formulation can recover different Kuramoto-type models as special cases. Different choices of the manifold M and the embedding F correspond to different state spaces and interaction geometries, while the different value of the phase-lag parameter \alpha introduces different Kuramoto-Sakaguchi type frustration. A few representative examples are summarized in Table 1 . Their definitions and relations with Eqs. ( 3 ) and ( 5 ) are presented in Appendix B . II.4 General model in continuous form Building on the established correspondence with previous models, we proceed to develop the continuous counterpart of our discrete formulation. The continuum formulation arises in the mean-field limit N\to\infty of Eqs. ( 3 ) and ( 5 ), whose detailed derivation is presented in Appendix C 70 ; 24 . In general, we can consider an empirical measure on M and relate it with the limit N\to\infty in the weak formulation of the dynamics. We separate the distribution of intrinsic drift fields from the conditional spatial density and write the limiting measure on the tangent bundle as \rho\left(\sigma,V,t\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V , where \rho\left(\sigma,V,t\right) denotes the conditional density of oscillators at time t , in state \sigma\in M , for a fixed intrinsic field V , and h\left(V\right) is the time-independent probability density of V . The conditional density satisfies \displaystyle\int_{M}\rho\left(\sigma,V,t\right)\mathsf{d}\mu\left(\sigma\right)=1 (9) for every fixed V , where TM is the tangent bundle of the manifold (i.e., the union of all the tangent spaces), \mu denotes a volume measure, and \mathsf{d}\mu\left(\sigma\right)=\sqrt{\det g}\mathsf{d}^{D}x is the Riemannian volume element 42 ; 43 . In the continuous setting, the order parameter of the system can be expressed as \displaystyle r\left(t\right)=\int_{TM}\int_{M}F\left(\sigma\right)\rho\left(\sigma,V,t\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V, (10) which is the expectation of F\left(\sigma\right) with respect to the probability measure \rho\left(\sigma,V,t\right)\mathsf{d}\mu\left(\sigma\right)h\left(V\right)\mathsf{d}V (here h\left(V\right) is the probability density of V at each position). To reflect the influence of the global coupling force, represented by the order parameter, on the evolution of oscillator states, we propose the velocity field equation of the oscillator states \displaystyle\mathbf{v}\left(\sigma,V,t\right)=V\left(\sigma\right)+K\mathsf{P}_{\sigma}^{\perp}\left(r\left(t\right)-\alpha Ar\left(t\right)\right). (11) In this equation, V\left(\sigma\right) describes the intrinsic velocity that depends on the local position \sigma and reflects heterogeneity. For simplicity, we assume \mathbb{E}\left[V\left(\sigma\right)\right]=0 and \mathbb{E}\left[V\left(\sigma\right)\otimes V\left(\sigma\right)\right]=\Delta^{2}\mathbf{I} , where \Delta measures the variance of intrinsic velocity and \mathbf{I} is the identity tensor on the tangent space. K\mathsf{P}_{\sigma}^{\perp}r\left(t\right) drives the system toward synchronization given the feedback effects of the order parameter. The non-reciprocal coupling term -K\mathsf{P}_{\sigma}^{\perp}\alpha Ar\left(t\right) models the reaction delays inherent in real systems and disrupts synchronization. The structure of the velocity field in Eq. ( 11 ) is consistent with the mean-field velocity obtained in the continuum limit. In Appendix C we show that, at the level of the limiting density, the drift term entering the continuity equation is given by an intrinsic part V\left(\sigma\right) plus an interaction part obtained by averaging the discrete coupling \Gamma\left(\sigma_{i},\sigma_{j};\alpha\right) over the distribution of oscillator states. When the interaction is expressed in terms of the order parameter r\left(t\right) as in Eq. ( 10 ), this averaged coupling reduces exactly to the projection \mathsf{P}_{\sigma}^{\perp}\left(r\left(t\right)-\alpha Ar\left(t\right)\right) in Eq. ( 11 ). The velocity field defined above effectively transports the probability density over the manifold to create the flow of a “probability fluid”. This probability flow describes how the statistical distribution of the oscillator system evolves over time in the phase space. In general, the evolution equation of this flow is written as \displaystyle\frac{\partial}{\partial t}\rho+\nabla_{M}\cdot\mathbf{J}=0, (12) where \nabla_{M} is the previously defined covariant divergence operator and \mathbf{J}=\rho\mathbf{v} is a probability density flow tensor 43 . For any \sigma\in M , \mathbf{J}\left(\sigma\right) indicates the direction of probability flow and |\mathbf{J}\left(\sigma\right)| quantifies the flow rate. The divergence \nabla_{M}\cdot\mathbf{J} measures the net outflow per unit time and unit volume. There is a net outflow of probability density from the local volume element when \nabla_{M}\cdot\mathbf{J}>0 and there is a net inflow of probability density when \nabla_{M}\cdot\mathbf{J}<0 . More precisely, the above equation can be rewritten in an explicit form under a local coordinate chart \{x^{1},\ldots,x^{D}\} by explictly calculating the covariant divergence \displaystyle\frac{\partial}{\partial t}\rho+\frac{1}{\sqrt{\det g}}\frac{\partial}{\partial x^{k}}\left(\sqrt{\det g}\rho v^{k}\right)=0, (13) in which v^{k} is the contravariant component of the velocity field (i.e., \mathbf{v}=v^{k}\partial_{k} ) and \rho v^{k}=\mathbf{J}^{k} is the contravariant component of the probability flow density. In Eq. ( 13 ), \sqrt{\det g}\rho v^{k} measures the invariant probability flux density through a coordinate surface (i.e., the amount of probability crossing a unit coordinate area per unit time). \sqrt{\det g} encodes the influence of the manifold curvature on the probability flow since \det g varies sharply in regions of high curvature. When \sqrt{\det g} enlarges, probability flow deceleration and density dilution occur, making curvature equivalent to a repulsive potential. When \sqrt{\det g} reduces, probability flow accelerates and probability density concentrates, making curvature equivalent to an attractive potential. The normalization coefficient \frac{1}{\sqrt{\det g}} normalizes this flux variation to unit volume. Eqs. ( 12 - 13 ) interpret the probability flow as an incompressible fluid over the manifold and describe its local conservation law for every fixed intrinsic field V . The corresponding global conservation law is \displaystyle\frac{\partial}{\partial t}\int_{TM}\int_{M}\rho\left(\sigma,V,t\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V=0. (14) The corresponding boundary condition is either that the manifold M is compact, or that a zero-flux condition (i.e., the Neumann-type condition) is imposed at the boundary. Subject to these constraints, the total probability density is conserved over time, with only local flows occurring. III Geometry- and topology-governed phase transition III.1 Analysis framework After extending the Kuramoto-Sakaguchi model to compact, connected, orientable, and homogeneous D -dimensional Riemannian manifolds, we present the derivation of our main theorem in this section. The core result of our work has two complementary parts. For the chosen embedding and order-parameter sector, the averaged tangent projection determines the coefficient \kappa\left(M\right) , and this coefficient fixes the critical coupling for the linear loss of stability of the incoherent state. The manifold topology constrains the cubic term of the response equation through the Euler characteristic. Within the one-mode local reduction of Appendices D and E , topology does not allow generic continuous or tricritical synchronization transitions to occur when \chi\left(M\right)\neq 0 . If the additional stabilization condition \Lambda_{5}>0 also holds in that nonzero-Euler class, topology further selects the discontinuous side. When \chi\left(M\right)=0 , topology does not impose that obstruction, so continuous, discontinuous, and tricritical local branches all remain allowed. Below, we use the continuous form of the generalized model to elaborate our derivation. Our basic strategy is to formulate the response equation of the order parameter under perturbations and establish its connection with the geometric and topological characteristics of the manifold. To implement this analysis, we consider a situation in which the system is initialized at a ground state \displaystyle\rho_{0}\left(\sigma,V\right)=\frac{1}{\textsf{Vol}\left(M\right)} (15) for every fixed V (i.e., the spatial distribution is uniform over the manifold conditional on each intrinsic drift field, here \textsf{Vol}\left(M\right) measures the total volume of M ). This uniform distribution lies far from the synchronized state, leading to a near-zero value of the order parameter r_{0}\approx 0 . We add small perturbations on \rho_{0} to affect r_{0} \displaystyle\rho=\rho_{0}+\delta_{\rho},\;\;\;\;\;r=r_{0}+\delta_{r}. (16) These small perturbations can be used to model the influence of interactions between oscillators on the probability flow described in Eq. ( 12 ). Note that \rho_{0} is a constant at every point on the manifold for each fixed V . Under small perturbations, we assume that the response of the order parameter can be described by \displaystyle\frac{\partial}{\partial t}r=\mathcal{L}\left(r\right)+\mathcal{N}\left(r\right), (17) where \mathcal{L}\left(r\right) is the linear term that we can obtain through linear perturbation analysis and \mathcal{N}\left(r\right) is the non-linear term. In the following analysis, our task is to explicitly determine the forms of these terms and to relate them to the topology of the manifold. Table 2: Geometric control of the linear term in the order-parameter response equation near the incoherent state for a fixed embedding and order-parameter sector. Here the threshold means the critical coupling at which the incoherent state first loses linear stability. Geometric input Entry into the linear term Linear consequence Averaged tangent projection The coupling-induced linear feedback of the order parameter is built from the manifold average of \mathsf{P}_{\sigma}^{\perp} on the chosen embedding sector. The relevant linear geometric information is fixed before any dynamical simplification. Homogeneous symmetry Under isotropy of the order-parameter sector, this average collapses to one scalar coefficient, namely \kappa\left(M\right) . All geometric information relevant to the linear instability is encoded in \kappa\left(M\right) . Linear growth rate The response operator takes the reduced form K\kappa\left(M\right)\left(I-\alpha A\right) . The critical coupling for the linear loss of stability, and the real growth rate, are therefore fixed by the chosen embedding geometry. III.2 Linear response term of the order-parameter response equation Divergence formulation of the linear response term.- We first deal with the linear term \mathcal{L}\left(r\right) . Based on linear perturbation analysis, the velocity field of the oscillator states after perturbations changes according to \mathbf{v}\left(\sigma,V,t\right)=\mathbf{v}_{0}+\delta_{\mathbf{v}} , where we know \mathbf{v}_{0}=V\left(\sigma\right) because each oscillator evolves according to its intrinsic velocity at the moment of system initialization. By combining Eq. ( 11 ) and Eq. ( 16 ), we can calculate \delta_{\mathbf{v}} as \displaystyle\delta_{\mathbf{v}}=K\mathsf{P}_{\sigma}^{\perp}\left(\delta_{r}-\alpha A\delta_{r}\right), (18) which characterizes how the interactions between oscillators affect the dynamical evolution of the system after initialization. Meanwhile, by inserting perturbations on the probability density and the velocity field into Eq. ( 12 ), we can obtain \displaystyle\frac{\partial}{\partial t}\left(\rho_{0}+\delta_{\rho}\right)+\nabla_{M}\cdot\left[\left(\rho_{0}+\delta_{\rho}\right)\left(\mathbf{v}_{0}+\delta_{\mathbf{v}}\right)\right]=0. (19) By omitting the second-order infinitesimal \delta_{\rho}\delta_{\mathbf{v}}\approx 0 in the linear perturbation analysis, we can simplify Eq. ( 19 ) as \displaystyle\frac{\partial}{\partial t}\left(\rho_{0}+\delta_{\rho}\right)+\nabla_{M}\cdot\left(\rho_{0}\delta_{\mathbf{v}}+\delta_{\rho}\mathbf{v}_{0}+\rho_{0}\mathbf{v}_{0}\right)=0. (20) Given the stability, \frac{\partial}{\partial t}\rho_{0}=0 , and equilibrium nature, \nabla_{M}\cdot\left(\rho_{0}\mathbf{v}_{0}\right)=0 , of the ground state, we can reformulate Eq. ( 20 ) as \displaystyle\frac{\partial}{\partial t}\delta_{\rho}+\nabla_{M}\cdot\left(\rho_{0}\delta_{\mathbf{v}}\right)+\nabla_{M}\cdot\left(\delta_{\rho}\mathbf{v}_{0}\right)=0, (21) where \nabla_{M}\cdot\left(\rho_{0}\delta_{\mathbf{v}}\right) describes the coupling-induced probability flow (i.e., collective dynamics driven by order parameter perturbations), which serves as the positive feedback mechanism of the order parameter (i.e., \delta r\uparrow\;\Rightarrow\delta\mathbf{v}\uparrow\;\Rightarrow\nabla_{M}\cdot\left(\rho_{0}\delta_{\mathbf{v}}\right)<0\;\Rightarrow\delta_{\rho}\uparrow ). Moreover, \nabla_{M}\cdot\left(\delta_{\rho}\mathbf{v}_{0}\right) describes the joint effects of the intrinsic velocity and the probability density perturbations on the probability flow, which serves as the negative feedback mechanism of the order parameter (i.e., \nabla_{M}\cdot\left(\delta_{\rho}\mathbf{v}_{0}\right)<0\;\Rightarrow\delta_{\rho}\downarrow ). Moreover, we can follow Eq. ( 10 ) to define \delta_{r} as \delta_{r}=\int_{TM}\int_{M}F\left(\sigma\right)\delta_{\rho}\left(\sigma,V,t\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V . Then we compute the derivative of this equation \displaystyle\frac{\partial}{\partial t}\delta_{r}=\int_{TM}\int_{M}F\left(\sigma\right)\frac{\partial}{\partial t}\delta_{\rho}h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V. (22) By inserting the expression of \frac{\partial}{\partial t}\delta_{\rho} in Eq. ( 21 ) into Eq. ( 22 ), we can obtain \displaystyle\frac{\partial}{\partial t}\delta_{r}= \displaystyle-\int_{TM}\int_{M}F\left(\sigma\right)\nabla_{M}\cdot\left(\rho_{0}\delta_{\mathbf{v}}\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V \displaystyle-\int_{TM}\int_{M}F\left(\sigma\right)\nabla_{M}\cdot\left(\delta_{\rho}\mathbf{v}_{0}\right)h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V. (23) We use the divergence theorem 43 and the differential of the embedding to reformulate these divergence terms in Eq. ( 23 ). Specifically, for the manifold without boundary we obtain \displaystyle\int_{M}F\left(\sigma\right)\nabla_{M}\cdot\mathbf{X}\mathsf{d}\mu\left(\sigma\right)=-\int_{M}\mathsf{d}F_{\sigma}\left[\mathbf{X}\left(\sigma\right)\right]\mathsf{d}\mu\left(\sigma\right), (24) where \mathbf{X} is a tangent vector field and \mathsf{d}F_{\sigma}:T_{\sigma}M\to\mathbb{R}^{D_{a}} denotes the differential of the embedding. Applying Eq. ( 24 ) on the divergence terms in Eq. ( 23 ), we have \displaystyle\frac{\partial}{\partial t}\delta_{r}= \displaystyle\int_{TM}\int_{M}\mathsf{d}F_{\sigma}\left[\rho_{0}\delta_{\mathbf{v}}\right]h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V \displaystyle+\int_{TM}\int_{M}\mathsf{d}F_{\sigma}\left[\delta_{\rho}\mathbf{v}_{0}\right]h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V. (25) Then, our central target is to investigate the topological mechanisms underlying these two divergence terms. The first divergence term.- For the first divergence term, we can interchange the order of integration and insert Eq. ( 18 ) into the formula to write this divergence as \displaystyle\int_{TM}\int_{M}\mathsf{d}F_{\sigma}\left[\rho_{0}\delta_{\mathbf{v}}\right]h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V \displaystyle= \displaystyle K\rho_{0}\int_{M}\mathsf{d}F_{\sigma}\left[\mathsf{P}_{\sigma}^{\perp}\mathbf{Y}\right]\mathsf{d}\mu\left(\sigma\right)\int_{TM}h\left(V\right)\mathsf{d}V, (26) where we mark \mathbf{Y}=\delta_{r}-\alpha A\delta_{r} . Meanwhile, we notice that \int_{TM}h\left(V\right)\mathsf{d}V=1 as required by the definition of a probability distribution and \rho_{0}=1/\textsf{Vol}\left(M\right) . Since the embedding identifies T_{\sigma}M with a tangent subspace of \mathbb{R}^{D_{a}} , we have \mathsf{d}F_{\sigma}\left[\mathsf{P}_{\sigma}^{\perp}\mathbf{Y}\right]=\mathsf{P}_{\sigma}^{\perp}\mathbf{Y} . Therefore Eq. ( 26 ) reduces to \displaystyle\int_{TM}\int_{M}\mathsf{d}F_{\sigma}\left[\rho_{0}\delta_{\mathbf{v}}\right]h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V \displaystyle= \displaystyle\frac{K}{\textsf{Vol}\left(M\right)}\int_{M}\mathsf{P}_{\sigma}^{\perp}\mathbf{Y}\mathsf{d}\mu\left(\sigma\right), (27) Up to this point, no homogeneity assumption has been used. The integral form above is valid for any compact orientable manifold equipped with a smooth embedding. To obtain the scalar coefficient used in the subsequent bifurcation analysis, we now invoke the homogeneity of M together with the isotropy of the embedding sector probed by the order parameter. Under this symmetry reduction, the averaged tangent projection acts as a scalar multiple of the identity on the relevant ambient subspace, so that \displaystyle\frac{1}{\textsf{Vol}\left(M\right)}\int_{M}\mathsf{P}_{\sigma}^{\perp}\mathbf{Y}\mathsf{d}\mu\left(\sigma\right)=\kappa\left(M\right)\mathbf{Y}, (28) Therefore the first divergence term becomes \displaystyle\int_{TM}\int_{M}\mathsf{d}F_{\sigma}\left[\rho_{0}\delta_{\mathbf{v}}\right]h\left(V\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V=K\kappa\left(M\right)\mathbf{Y}, (29) where \kappa\left(M\right) is a geometric factor determined by the averaged tangent projection of the embedding. For the standard sphere S^{D-1}\subset\mathbb{R}^{D} , one has \kappa\left(S^{D-1}\right)=\frac{D-1}{D} . The second divergence term.- Then, we deal with the second divergence term in Eq. ( 25 ), i.e., the contribution involving the intrinsic velocity field \mathbf{v}_{0} and the perturbation of the density \delta_{\rho} . In contrast to the first divergence term in Eq. ( 25 ), which is purely geometric and linear in \delta_{r} through the projection of F\left(\sigma\right) , the second term encodes how the intrinsic velocity \mathbf{v}_{0} redistributes the perturbation of the density on M . To make this contribution precise, we introduce the transport operator \displaystyle\mathcal{T}_{V}\left[\varphi\right]=-\nabla_{M}\cdot\left(\varphi V\right), (30) which is the linearized advection generated by the intrinsic drift. Because \nabla_{M}\cdot V=0 , integration by parts yields \displaystyle\int_{M}f\,\mathcal{T}_{V}\left[g\right]\mathsf{d}\mu=-\int_{M}g\,\mathcal{T}_{V}\left[f\right]\mathsf{d}\mu, (31) for all smooth scalar functions f and g on M . Therefore the transport operator is skew-adjoint on L^{2}\left(M,\mu\right) and satisfies \displaystyle\operatorname{Re}\int_{M}\overline{\varphi}\,\mathcal{T}_{V}\left[\varphi\right]\mathsf{d}\mu=0, (32) for every smooth test function \varphi . Consequently, the intrinsic drift contributes only to the antisymmetric part of the linearized generator. In particular, it redistributes phases and frequencies but does not change the real growth rate that determines the onset of synchronization. We therefore identify the geometric contribution to the linear term \mathcal{L}\left(r\right) in Eq. ( 17 ) as \displaystyle\mathcal{L}_{\mathrm{geo}}\left(\delta_{r}\right) \displaystyle=\frac{K}{\textsf{Vol}\left(M\right)}\int_{M}\mathsf{P}_{\sigma}^{\perp}\left(\delta_{r}-\alpha A\delta_{r}\right)\mathsf{d}\mu\left(\sigma\right), (33) which reduces, in the homogeneous-isotropic case, to \displaystyle\mathcal{L}_{\mathrm{geo}}\left(\delta_{r}\right)=K\kappa\left(M\right)\left(\delta_{r}-\alpha A\delta_{r}\right). (34) Here \mathcal{L}_{\mathrm{geo}} denotes the part of \mathcal{L} that is generated by the coupling geometry after the antisymmetric transport part has been separated. The threshold means the critical coupling K_{c} at which the incoherent state first loses linear stability. Eq. ( 34 ) shows that K_{c} depends on the manifold only through the geometric factor \kappa\left(M\right) extracted from Eq. ( 29 ), because this factor multiplies the real linear growth rate of the order-parameter perturbation. For the standard sphere, Eq. ( 34 ) reproduces the familiar coefficient K\frac{D-1}{D} in the linear response. We record this sphere value as \displaystyle\kappa\left(S^{D-1}\right)=\frac{D-1}{D}. (35) Table 2 summarizes the geometric origin of the linear response term. Table 3: Topological control of the nonlinear response term under the locality conditions of Appendix D and the sign condition of Appendix E . Topology of M Entry into the cubic term Nonlinear consequence Field u_{c} The cubic term of the reduced response equation is organized by the induced tangent field on M . Topology acts through the zeros and local indices of u_{c} . Poincaré-Hopf If \chi\left(M\right)\neq 0 , then u_{c} has zeros, and their total index is \chi\left(M\right) . Topology forces nontrivial local contributions to \Lambda_{3} . Local sign rule Under the locality and sign conditions, the indexed zero structure fixes the sign of \Lambda_{3} . The cubic term inherits a direct topological constraint. Phase transition Under the same conditions, \chi\left(M\right)\neq 0 gives \Lambda_{3}<0 , while \chi\left(M\right)=0 leaves the sign open. Non-zero Euler characteristic does not allow a supercritical continuous branch to occur by topology. III.3 Non-linear response term of the order-parameter response equation In the previous section, we have obtained the explicit form of the linear response operator and identified the geometric factor \kappa\left(M\right) that controls the deterministic linear growth rate [see Eqs. ( 26 - 29 )]. We now focus on the nonlinear coefficient that determines the local bifurcation type near the incoherent state. The technical reduction is collected in Appendix D ; here we retain only the ingredients needed for the topological conclusion. The assumptions introduced below are standard in a local bifurcation analysis near onset 15 ; 33 . These assumptions also match the physical picture of synchronization onset in a homogeneous mean-field system. A simple critical eigenvalue selects the critical collective mode. The transversality condition states that this mode changes stability at a definite critical coupling. The condition that the quadratic coefficient vanishes rules out a preferred sign of the order parameter at the incoherent state. Many symmetric couplings satisfy this condition automatically. Appendix D gives the precise form used here. Reduced amplitude equation.- We assume that the steady response problem admits a smooth local reduction near the critical coupling K=K_{c} . We assume that the critical eigenvalue of the linearized order-parameter operator is simple. We assume that this eigenvalue crosses zero transversely. We also assume that the quadratic normal-form coefficient vanishes. Appendix D then yields a one-dimensional scalar amplitude equation for the critical collective coordinate. This equation is the one-mode reduction of the full response equation \frac{\partial}{\partial t}r=\mathcal{L}\left(r\right)+\mathcal{N}\left(r\right) in Eq. ( 17 ). Its linear term is the reduced action of \mathcal{L} near K=K_{c} , whereas its cubic term is the leading nonlinear contribution generated by \mathcal{N} . The reduced equation reads \displaystyle\Psi\left(a;K\right) \displaystyle=\lambda\left(K\right)a+\Lambda_{3}a^{3} \displaystyle\quad+O\left(a^{4}\right)+O\left(\left|K-K_{c}\right|a^{2}\right)=0, (36) together with the critical response branch r\left(a\right)=a\,r_{c}+O\left(a^{2}\right) , where r_{c} is the critical order-parameter direction. The coefficient \Lambda_{3} admits the explicit formula derived in Appendix D . This reduction does not change the model. It only separates the critical collective coordinate from the stable modes that are determined by it near onset. Topological input.- To connect \Lambda_{3} with the topology of M , we associate with r_{c} the induced critical tangent field \displaystyle u_{c}\left(\sigma\right) \displaystyle=\mathsf{P}_{\sigma}^{\perp}\left(r_{c}-\alpha Ar_{c}\right). (37) This field is the natural geometric object in our model. The microscopic transport law in Eq. ( 11 ) depends on the order parameter through the projected tangent field \mathsf{P}_{\sigma}^{\perp}\left(r-\alpha Ar\right) . For this reason, the topological information enters the nonlinear response through u_{c} . It does not enter through r_{c} alone. Under the locality and symmetry conditions stated in Appendix D , the cubic coefficient can be written as \displaystyle\Lambda_{3}=\int_{M}T\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right]\,\mathsf{d}\mu\left(\sigma\right), (38) where T\left(\sigma\right) is a smooth symmetric trilinear tensor field. These conditions reflect locality and symmetry that are already built into the model. The coupling term acts pointwise on the manifold. The homogeneous structure organizes the relevant tensor fields into symmetry sectors. Appendix D shows that these properties are preserved when the stable modes are eliminated. The Poincaré-Hopf theorem 56 then implies that, when the Euler characteristic \chi\left(M\right) of M is non-zero, the field u_{c} must have zeros. This topologically forced zero set does not by itself determine the sign of \Lambda_{3} . To obtain a definite sign statement, we impose the sign condition stated in Appendix E . This condition concerns the local cubic density q\left(\sigma\right)=T\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right] . It requires the contribution from each isolated zero of u_{c} to be -\gamma_{\ell}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right) at leading order with \gamma_{\ell}>0 , and it also requires the regular contribution away from the zero set not to overwhelm these indexed contributions. Under that condition, \chi\left(M\right)\neq 0 implies \Lambda_{3}<0 , whereas \chi\left(M\right)=0 leaves the sign of \Lambda_{3} to be decided by the analytic structure of the reduced nonlinearity. Bifurcation consequence.- Appendix D also gives \lambda\left(K\right)=\lambda^{\prime}\!\left(K_{c}\right)\left(K-K_{c}\right)+O\left(\left(K-K_{c}\right)^{2}\right) with \lambda^{\prime}\!\left(K_{c}\right)\neq 0 , such that any nontrivial small-amplitude branch with \Lambda_{3}\neq 0 satisfies \displaystyle\left|a\right|\sim\sqrt{-\frac{\lambda\left(K\right)}{\Lambda_{3}}}. (39) Therefore, if \lambda^{\prime}\!\left(K_{c}\right)>0 , then \Lambda_{3}>0 yields a supercritical continuous branch on the linearly unstable side, while \Lambda_{3}<0 yields a subcritical branch on the linearly stable side and therefore a discontinuous onset. Combining this analytic bifurcation criterion with the topological sign statement from Appendix E , we conclude that non-zero Euler characteristic forbids a supercritical small-amplitude synchronization branch, whereas zero Euler characteristic leaves open both continuous and discontinuous transitions. The condition \Lambda_{3}\neq 0 is also standard. This condition only states that the cubic term is the first nonlinear term that controls the local branch. When symmetry leaves a higher-dimensional critical eigenspace, the same local conclusions apply branch by branch after one selects a symmetry-broken critical direction. The present one-mode reduction should be read in that branchwise sense for such cases. Subsecs. III.4 and III.5 , together with Appendices F - I , record the corresponding defect structure, the weak-field scaling laws near a continuous branch, and the quintic scales of the subcritical regime. Table 3 summarizes the topological origin of the nonlinear response term. For the hypersphere M=S^{D-1} , one has \chi\left(S^{D-1}\right)=1+(-1)^{D-1} , so \chi=0 precisely when D is even. This recovers the classical even/odd dimensional dichotomy observed in high-dimensional Kuramoto models as a corollary of the present topological framework. Table 4: Topology-conditioned access to local onset scenarios in the one-mode reduction. The first row uses the sign condition of Appendix E , and the statement that a discontinuous branch is selected also uses the stabilizing condition \Lambda_{5}>0 . A non-zero Euler characteristic does not allow generic continuous or tricritical onset to occur by topology in the present framework. A zero Euler characteristic removes that obstruction, so it allows a continuous onset without by itself selecting which local branch is realized. Topology of M Coefficient condition Accessible onset Leading local law \chi\left(M\right)\neq 0 Appendix E gives \Lambda_{3}<0 , and \Lambda_{5}>0 stabilizes the branch Discontinuous onset with hysteresis \Delta K_{\mathrm{hys}}\sim\Lambda_{3}^{2}/\left(4\lambda^{\prime}\!\left(K_{c}\right)\Lambda_{5}\right) , \left|a_{\mathrm{jump}}\right|=\sqrt{-\Lambda_{3}/\Lambda_{5}} \chi\left(M\right)=0 \Lambda_{3}>0 Continuous onset is allowed and realized \beta=\frac{1}{2} , \gamma=1 , \delta=3 \chi\left(M\right)=0 \Lambda_{3}<0<\Lambda_{5} Discontinuous onset is also allowed Same local hysteresis scales as above \chi\left(M\right)=0 \Lambda_{3}=0<\Lambda_{5} Tricritical continuous onset is also allowed \left|a_{\ast}\right|\sim\left|K-K_{c}\right|^{1/4} , \left|a\right|\sim\left|h\right|^{1/5} III.4 Critical defect structure of the onset mode The topological obstruction described above also has a direct spatial interpretation. The induced tangent field u_{c}\left(\sigma\right)=\mathsf{P}_{\sigma}^{\perp}\left(r_{c}-\alpha Ar_{c}\right) gives the local direction in which the synchronized component first develops on M . In the language of statistical physics, one may regard u_{c} as the ordered texture selected at onset 68 ; 65 ; 64 . An isolated zero of u_{c} is then a topological defect of that texture, and the zero itself is the defect core. At such a point, the local ordered direction cannot be extended smoothly, because the critical mode does not select any tangent direction there. Assume that all zeros of u_{c} are isolated. Then the Poincaré-Hopf theorem gives \displaystyle\sum_{\ell=1}^{N_{\mathrm{def}}}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)=\chi\left(M\right), (40) where N_{\mathrm{def}} denotes the number of defect cores in the onset texture. Under the generic nondegeneracy condition stated in Appendix H , each isolated zero has index \pm 1 . Therefore \displaystyle N_{\mathrm{def}}\geq\left|\chi\left(M\right)\right|. (41) The integer \operatorname{ind}_{p_{\ell}}\left(u_{c}\right) is the topological charge carried by the \ell th defect core. Eq. ( 40 ) states that the net defect charge of the onset texture is fixed by the Euler characteristic of M . This conclusion sharpens the topological statement beyond the sign of \Lambda_{3} . A non-zero Euler characteristic does not merely forbid a smooth defect-free onset texture. In the generic case, it forces the ordered texture that first appears at threshold to contain at least \left|\chi\left(M\right)\right| simple defect cores. The onset pattern therefore carries a finite background topological charge from the start. When \chi\left(M\right)=0 , topology allows a smooth defect-free onset texture. In that sense, topology no longer blocks a continuous branch on defect-counting grounds. If critical defects are present and all of them are simple, then their positive and negative topological charges must balance. The onset texture may still contain local defects, but topology does not impose a nonzero background charge. Appendix H records this counting argument in a precise form. III.5 Topology-conditioned onset scenarios Within the local reductions of Appendices F and G , the cubic and quintic coefficients determine the local statistical-physics scenario at onset. The important point is not that topology changes the numerical values of the generic mean-field exponents in this one-dimensional local theory. The important point is that topology determines which branch carrying those scalings can actually appear near threshold. If \chi\left(M\right)\neq 0 and the sign condition in Appendix E holds, then \Lambda_{3}<0 . The generic supercritical continuous branch in Appendix F is therefore not allowed to occur by topology. The tricritical continuous branch discussed in Appendix G is also not allowed to occur by topology, because it would require \Lambda_{3}=0 . Under the additional analytic condition \Lambda_{5}>0 , the onset is locally discontinuous, and the local hysteresis width and jump amplitude are then determined by Appendix G . If \chi\left(M\right)=0 , topology imposes no sign constraint on \Lambda_{3} . Topology therefore removes the obstruction to a continuous onset. A generic continuous branch is allowed when \Lambda_{3}>0 . The same zero-Euler condition also allows a discontinuous branch, which is allowed when \Lambda_{3}<0<\Lambda_{5} . It also allows a tricritical continuous branch, which is allowed after additional tuning to \Lambda_{3}=0 with \Lambda_{5}>0 . In this sense, topology acts as a selection rule for onset scenarios: a non-zero Euler characteristic does not allow certain branches to occur by topology, whereas a zero Euler characteristic permits them without selecting which one is actually realized. The local exponents are still fixed by the reduced normal form itself. Table 4 summarizes which local onset scenarios are not allowed by topology, which are allowed by topology, and which are selected by topology in the present theory. IV Case study In this section, we test the theory presented in Sec. III on representative homogeneous manifolds. We first identify the geometric factor \kappa\left(M\right) that is determined by the averaged tangent projection on the chosen embedding and order-parameter sector. This coefficient multiplies the linear growth term of the order-parameter perturbation and therefore fixes the linear instability threshold. We then state the Euler characteristic and the corresponding topological prediction for the cubic coefficient under the locality conditions of Appendix D and the sign condition of Appendix E . Finally, we translate that prediction into the defect content of the onset texture and into the local onset scenarios near threshold. In particular, under those conditions, a non-zero Euler characteristic does not allow generic continuous onset to occur by topology and can select a discontinuous onset once \Lambda_{5}>0 , whereas a zero Euler characteristic allows a continuous onset without forcing it to occur. In Table 5 and in the discussion below, the first four cases lie on the nonzero-Euler side and the last four lie on the zero-Euler side. Appendices J and K collect the explicit geometric and topological computations used below. When the linearized problem is symmetry-degenerate, we interpret the one-mode reduction branch by branch. In other words, we first select a critical direction after symmetry breaking and then apply the local theory of Subsecs. III.3 - III.5 to that branch. Table 5: Representative case studies. The first row is the hypersphere case; Rows 2–4 have \chi\left(M\right)\neq 0 ; Rows 5–8 have \chi\left(M\right)=0 . In Column 4, Q_{\mathrm{def}} and N_{\mathrm{def}}^{\min} denote the net defect charge and the minimum number of simple defect cores. Column 5 is stated within the one-mode reduction, under the locality conditions of Appendix D and the sign condition of Appendix E ; a discontinuous branch is marked as selected only when the additional stabilizing condition \Lambda_{5}>0 holds. Case \kappa\left(M\right) \chi\left(M\right) Defect content Topology-conditioned onset S^{D-1} \left(D-1\right)/D 1+(-1)^{D-1} Odd D : Q_{\mathrm{def}}=2 , N_{\mathrm{def}}^{\min}=2 . Even D : Q_{\mathrm{def}}=0 . Odd D : generic continuous and tricritical onsets are not allowed to occur by topology; a discontinuous onset is selected if \Lambda_{5}>0 . Even D : topology allows a continuous onset; topology also allows discontinuous and tricritical onset. S^{2m}\times S^{2m} \frac{2m}{2m+1} 4 Q_{\mathrm{def}}=4 , N_{\mathrm{def}}^{\min}=4 . Generic continuous and tricritical onsets are not allowed to occur by topology. A discontinuous onset is selected if \Lambda_{5}>0 . \mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right) , 2\leq k\leq n-2 \frac{2k\left(n-k\right)}{n^{2}-1} \binom{n}{k} Q_{\mathrm{def}}=\binom{n}{k} , N_{\mathrm{def}}^{\min}=\binom{n}{k} . Generic continuous and tricritical onsets are not allowed to occur by topology. A discontinuous onset is selected if \Lambda_{5}>0 . \mathbb{CP}^{m} , m\geq 2 \frac{2}{m+2} m+1 Q_{\mathrm{def}}=m+1 , N_{\mathrm{def}}^{\min}=m+1 . Generic continuous and tricritical onsets are not allowed to occur by topology. A discontinuous onset is selected if \Lambda_{5}>0 . \mathbb{T}^{d} 1/2 0 Q_{\mathrm{def}}=0 . Defect-free texture allowed. Topology allows a continuous onset. Topology also allows discontinuous and tricritical onset. \mathrm{St}\left(p,n\right),\ 2\leq p0 is imposed, the local onset is discontinuous. This family demonstrates that the nonzero-Euler side of the theory is not tied to the parity structure of a single sphere. The topological input remains fixed at \chi=4 , while the geometric threshold factor varies with m . IV.3 Complex Grassmannian case We next consider the complex Grassmannian family 34 M=\mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right) with 2\leq k\leq n-2 . This family is compact, connected, orientable, homogeneous, and genuinely different from the sphere, torus, product-sphere, and Lie-group families considered above. It therefore supplies a nonzero-Euler class whose topology is not inherited from a sphere factor. In Appendix J , we evaluate the averaged tangent projector \displaystyle\overline{\mathsf{P}}_{\mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right)}=\frac{2k\left(n-k\right)}{n^{2}-1}I_{n^{2}-1}, (44) Therefore \displaystyle\kappa\left(\mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right)\right)=\frac{2k\left(n-k\right)}{n^{2}-1}. (45) The linear threshold is therefore governed by a geometric factor that is different from all previous cases and varies across the family. In Appendix K , we find \displaystyle\chi\left(\mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right)\right)=\binom{n}{k}. (46) Under the sign condition in Appendix E , every selected critical branch therefore satisfies \Lambda_{3}<0 . The onset texture must carry net defect charge \binom{n}{k} , and the generic simple-defect branch contains at least \binom{n}{k} defect cores. Generic continuous and tricritical onsets are therefore not allowed to occur by topology. A discontinuous onset is selected once the stabilizing condition \Lambda_{5}>0 is imposed. This family demonstrates that the nonzero-Euler side of the theory is not confined to hyperspheres or products of spheres. The same topological selection mechanism persists on a canonical complex homogeneous-space family whose Euler characteristic is fixed by Schubert-cell combinatorics rather than by parity. IV.4 Complex projective case We next consider the complex projective family 34 M=\mathbb{CP}^{m} with m\geq 2 . This family provides another non-spherical homogeneous space with complex topology. It is the rank-one complex Grassmannian. We treat it separately because both the geometric coefficient and the topological charge take especially simple forms. In Appendix J , we obtain \displaystyle\kappa\left(\mathbb{CP}^{m}\right)=\frac{2}{m+2}. (47) Thus the linear threshold varies explicitly with the complex dimension m . In Appendix K , we recover \displaystyle\chi\left(\mathbb{CP}^{m}\right)=m+1. (48) Under the sign condition in Appendix E , every selected critical branch therefore satisfies \Lambda_{3}<0 . The onset texture must carry net defect charge m+1 , and the generic simple-defect branch contains at least m+1 defect cores. Generic continuous and tricritical onsets are therefore not allowed to occur by topology. A discontinuous onset is selected once the stabilizing condition \Lambda_{5}>0 is imposed. The complex projective case makes the nonzero-Euler mechanism particularly explicit. The same topological selection mechanism persists on a standard complex manifold whose Euler characteristic grows linearly with the complex dimension. IV.5 Vector-phase torus case We now turn to the vector-phase Kuramoto class listed in Table 1 , for which the state manifold is M=\mathbb{T}^{d}=\left(S^{1}\right)^{d} with its standard product embedding into \mathbb{R}^{2d} . This family provides a whole class of flat homogeneous manifolds with zero Euler characteristic. It therefore gives the corresponding prediction for multi-angle oscillators beyond the single-circle setting. In Appendix J , we find the averaged tangent projector \overline{\mathsf{P}}=\frac{1}{2}I_{2d} , so the linear geometric coefficient is \displaystyle\kappa\left(\mathbb{T}^{d}\right)=\frac{1}{2}. (49) The value is independent of d because each circle factor contributes the same averaged projector \frac{1}{2}I_{2} . The linear instability threshold is therefore shifted away from the hypersphere value, but it remains explicit and dimension-independent within the torus family. Topologically, in Appendix K we verify that \chi\left(\mathbb{T}^{d}\right)=0 . Therefore topology imposes no sign rule on \Lambda_{3} in the present framework. Topology therefore allows a continuous onset, because no topological obstruction remains. A smooth defect-free onset texture is allowed. If simple defect cores are present, their positive and negative charges must balance. The same zero-Euler condition also allows a discontinuous onset, and it also allows a tricritical onset. Their actual realization is then decided by the analytic coefficients of the reduced equation rather than by topology. The torus family therefore isolates the meaning of the zero-Euler case in a form that is already tied to the vector-phase model of Table 1 . Topology does not force the onset texture to carry background charge, and topology allows all local branches summarized in Table 4 . At the same time, geometry still enters through the explicit value \kappa\left(\mathbb{T}^{d}\right)=\frac{1}{2} . IV.6 Real Stiefel case We next consider the real Stiefel family from Table 1 , with M=\mathrm{St}\left(p,n\right) and 2\leq p0 , topology therefore selects a discontinuous onset. The zero-Euler cases show the complementary role of topology. In the even hypersphere sector, in the torus family, in the real Stiefel family, in the rotation group, and in the unitary group, topology removes the obstruction to continuous onset and allows a defect-free texture. At the same time, the same zero-Euler condition also allows discontinuous and tricritical local branches. In that class, topology acts as a permission rule rather than a selection rule. The actually realized onset scenario is then decided by the analytic coefficients of the reduced normal form. V Conclusion In this work, we extended the Kuramoto-Sakaguchi framework from spheres to compact, connected, orientable, and homogeneous manifolds of arbitrary dimension. We derived the continuum equation on the manifold, identified the linear and nonlinear terms in the order-parameter response equation near the incoherent state, and connected those terms with the geometry and topology of the state manifold. For the chosen embedding and order-parameter sector, the averaged tangent projection determines the coefficient \kappa\left(M\right) . This coefficient multiplies the linear growth term of the order-parameter perturbation and therefore fixes the critical coupling K_{c} at which the incoherent state first loses linear stability. The manifold topology constrains the cubic term of the reduced response equation through the Euler characteristic and the corresponding cubic coefficient. Within the one-mode local reduction of Appendices D and E , topology does not allow generic continuous or tricritical onset to occur when \chi\left(M\right)\neq 0 . It also imposes a non-zero net defect charge on the onset texture. If the additional stabilization condition \Lambda_{5}>0 also holds in that nonzero-Euler class, topology further selects a discontinuous onset. When \chi\left(M\right)=0 , topology does not impose that obstruction, so continuous, discontinuous, and tricritical local branches all remain allowed. In that class, topology does not select the branch by itself. We then tested the theory on representative homogeneous manifolds. The hypersphere case recovers the classical parity law and shows how the odd and even sectors fall on the two topological sides of the theory. The family S^{2m}\times S^{2m} demonstrates that the same topological selection mechanism extends beyond a single sphere and survives while the geometric threshold factor varies. The complex Grassmannian and complex projective families show that the nonzero-Euler mechanism also persists on genuinely non-spherical complex homogeneous spaces. The torus, real Stiefel, rotation-group, and unitary cases show the complementary zero-Euler side: topology allows continuous onset and defect-free textures, but it does not rule out discontinuous or tricritical local branches. Collectively, the case studies support the main message of our theory: the averaged tangent projection of the chosen embedding sector fixes the critical coupling for the linear loss of stability of the incoherent state, while topology constrains which synchronization-onset scenarios can occur. Several concrete statistical-physics directions now become accessible within the present framework: 1. Finite-size scaling near topology-conditioned onset. One can study how the finite- N order-parameter fluctuations, Binder-like cumulants 8 , and pseudocritical couplings depend on whether \chi\left(M\right) vanishes. The most direct comparison is between odd hyperspheres or \mathbb{CP}^{m} , where continuous onset is not allowed by topology, and zero-Euler cases such as \mathbb{T}^{d} or \mathrm{U}\left(d\right) , where it is allowed 11 . 2. Noise-induced switching and metastability on nonzero-Euler manifolds. By adding intrinsic noise to the kinetic equation, one can derive the stationary order-parameter distribution near the subcritical branch and compute switching times between incoherent and synchronized states. The present quintic normal form gives a direct starting point for studying how topology-conditioned discontinuous onset affects activation barriers and residence times 11 . 3. Defect kinetics near synchronization onset. The theory predicts a net defect charge and a lower bound on the number of simple defect cores when \chi\left(M\right)\neq 0 . A natural next step is to simulate the onset texture on manifolds such as S^{2m}\times S^{2m} , \mathbb{CP}^{m} , and \mathrm{Gr}_{k}\left(\mathbb{C}^{n}\right) , and then measure defect creation, motion, annihilation, and coarsening as K crosses the threshold 68 ; 65 ; 64 . 4. Quenched disorder in the intrinsic drifts. The present theory already contains the drift field through the measure h\left(V\right) . One can study how the width and symmetry of that disorder modify the linear threshold, the cubic coefficient, and the accessibility of the continuous branch. This is especially relevant for matrix-valued models on \mathrm{St}\left(p,n\right) , \mathrm{SO}\left(n\right) , and \mathrm{U}\left(d\right) 61 ; 3 ; 40 . 5. Topology versus interaction-network structure. The present analysis is mean-field in character. A concrete next problem is to place the same manifold state spaces on sparse random graphs, modular graphs, or low-dimensional lattices, and ask whether the topology-conditioned onset scenarios survive when the coupling network itself is no longer complete 4 ; 69 ; 1 ; 60 ; 23 ; 22 ; 59 ; 54 ; 6 . 6. Nonequilibrium hysteresis under ramps and external forcing. Appendix F and Appendix G give local static scaling and hysteresis scales. One can now study slow and fast parameter ramps, periodic driving, and weak external fields to determine how the loop area, jump point, and lag depend on the manifold topology. This direction is especially natural for the nonzero-Euler cases, where topology already selects the discontinuous side of the local bifurcation structure 45 ; 16 ; 5 ; 49 . Appendix A Gradient flow structure for \alpha=0 In this appendix, we show that the coupling term in Eq. ( 3 ) admits a gradient-flow structure when the phase-lag parameter \alpha vanishes. When \alpha=0 , the coupling in Eq. ( 5 ) simplifies to \displaystyle\Gamma\left(\sigma_{i},\sigma_{j};0\right)=\mathsf{P}^{\perp}_{\sigma_{i}}F\left(\sigma_{j}\right), (56) such that the discrete dynamics in Eq. ( 3 ) becomes \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\sigma_{i}=V_{i}\left(\sigma_{i}\right)+\frac{K}{N}\sum_{j=1}^{N}\mathsf{P}^{\perp}_{\sigma_{i}}F\left(\sigma_{j}\right). (57) Then, we construct a potential whose Riemannian gradient reproduces the coupling term in Eq. ( 57 ). We consider the mean-field potential of the oscillator system \displaystyle U(\sigma_{1},\dots,\sigma_{N})=-\frac{K}{2N}\sum_{i,j=1}^{N}\big\langle F\left(\sigma_{i}\right),F\left(\sigma_{j}\right)\big\rangle. (58) Under the standing assumption that the Riemannian metric on M is induced by the embedding F:M\hookrightarrow\mathbb{R}^{D} , the Riemannian gradient of U with respect to \sigma_{i} is given by \displaystyle\nabla_{\sigma_{i}}U=-\frac{K}{N}\sum_{j=1}^{N}\mathsf{P}^{\perp}_{\sigma_{i}}F\left(\sigma_{j}\right)=-\frac{K}{N}\sum_{j=1}^{N}\Gamma\left(\sigma_{i},\sigma_{j};0\right). (59) Hence, the dynamics can be written compactly as \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\sigma_{i}=V_{i}\left(\sigma_{i}\right)-\nabla_{\sigma_{i}}U,\;\;\;i=1,\dots,N (60) when \alpha=0 . As described by this result, the coupling part of the manifold Kuramoto model is a gradient flow of the potential in Eq. ( 58 ), perturbed by the intrinsic drift fields V_{i} . This generalizes the well-known gradient structure of the classic Kuramoto model on the circle and of its high-dimensional extensions on spheres or other related homogeneous manifolds 63 ; 62 ; 13 ; 46 ; 51 ; 75 . Appendix B Special cases of the general model In this appendix, we briefly explain how several classic synchronization models arise as the special cases of the general framework defined in Eqs. ( 3 ) and ( 5 ). In all the cases, the state of oscillator i is denoted by \sigma_{i}\in M , the embedding is a smooth map F:M\hookrightarrow\mathbb{R}^{D_{a}} , and the coupling is defined by \Gamma\left(\sigma_{i},\sigma_{j};\alpha\right)=\mathsf{P}^{\perp}_{\sigma_{i}}\left[\left(I-\alpha A\right)F\left(\sigma_{j}\right)\right] with a fixed skew-symmetric matrix A\in\mathfrak{so}\left(D_{a}\right) and a scalar phase-lag parameter \alpha . Kuramoto model on S^{1} . We take the state manifold M=S^{1}\cong\mathbb{R}/2\pi\mathbb{Z} . Each oscillator state \sigma_{i}\in S^{1} is actually an angular coordinate \sigma_{i}\in\mathbb{R}/2\pi\mathbb{Z} . With this identification, we write the embedding as F\left(\sigma_{i}\right)=\left(\cos\sigma_{i},\sin\sigma_{i}\right) , while the phase-lag is turned off by setting A=\mathbf{0} and \alpha=0 . The tangent space at \sigma_{i} is one-dimensional and spanned by JF\left(\sigma_{i}\right)=\left(-\sin\sigma_{i},\cos\sigma_{i}\right) , where J is the 90^{\circ} counterclockwise rotation matrix J=\left(\begin{smallmatrix}0&-1\\ 1&\phantom{-}0\end{smallmatrix}\right) . With these definitions, the projection \mathsf{P}^{\perp}_{\sigma_{i}} extracts the component of F\left(\sigma_{j}\right) along JF\left(\sigma_{i}\right) , such that Eq. ( 3 ) reduces to the classic Kuramoto model with coupling \sin\left(\sigma_{j}-\sigma_{i}\right) 63 ; 62 . Kuramoto-Sakaguchi model on S^{1} . We keep the same manifold M=S^{1} and embedding F\left(\sigma\right)=\left(\cos\sigma,\sin\sigma\right) . Additionally, we introduce the phase frustration by choosing A=J and a small non-zero \alpha . The matrix J generates rotations in \mathbb{R}^{2} , and the factor \left(I-\alpha A\right)F\left(\sigma_{j}\right) may be viewed as a linearized rotation of F\left(\sigma_{j}\right) by an angle of \alpha . Projecting onto the tangent direction at \sigma_{i} again yields a scalar coupling along JF\left(\sigma_{i}\right) , which has a form of \sin\left(\sigma_{j}-\sigma_{i}\right)-\alpha\cos\left(\sigma_{j}-\sigma_{i}\right) (i.e., the first-order expansion of the Kuramoto-Sakaguchi interaction \sin\left(\sigma_{j}-\sigma_{i}-\alpha\right) for small |\alpha| ) 63 ; 62 . Generalized Kuramoto model on S^{D-1} . In this case, we define the state manifold as M=S^{D-1}=\left\{x\in\mathbb{R}^{D}:\left\|x\right\|=1\right\} and let the embedding be the canonical inclusion F\left(\sigma\right)=\sigma . Thus, each state \sigma_{i} is a unit vector in \mathbb{R}^{D} and the tangent space at \sigma_{i} is T_{\sigma_{i}}S^{D-1}=\left\{v\in\mathbb{R}^{D}:\left\langle v,\sigma_{i}\right\rangle=0\right\} . Given with A=0 and \alpha=0 , the coupling term becomes \Gamma\left(\sigma_{i},\sigma_{j};0\right)=\mathsf{P}^{\perp}_{\sigma_{i}}\sigma_{j}=\sigma_{j}-\left\langle\sigma_{i},\sigma_{j}\right\rangle\sigma_{i} , which coincides with the standard high-dimensional coupling term on the unit sphere used in generalized Kuramoto models on S^{D-1} 13 ; 46 ; 51 ; 75 . Frustrated Kuramoto model on S^{D-1} . Again, we take M=S^{D-1} and F\left(\sigma\right)=\sigma . Additionally, we allow a non-trivial phase-lag operator A\in\mathfrak{so}\left(D\right) together with a small nonzero \alpha . The factor \left(I-\alpha A\right)\sigma_{j}=\sigma_{j}-\alpha A\sigma_{j} acts as a matrix-valued coupling effect on \sigma_{j} along the direction generated by A , such that the interaction \Gamma\left(\sigma_{i},\sigma_{j};\alpha\right) implements a multi-dimensional frustration of the Kuramoto coupling term on the sphere. Such matrix-valued phase lags generalize the scalar phase shift of the Kuramoto-Sakaguchi model and recover frustrated high-dimensional Kuramoto systems studied on S^{D-1} 12 ; 17 . Vector-phase Kuramoto model on \mathbb{T}^{d} . To represent systems defined with d angular degrees of freedom per oscillator, we let the state manifold be the flat torus \mathbb{T}^{d}=\left(\mathbb{R}/2\pi\mathbb{Z}\right)^{d} and write \sigma_{i}=\left(\sigma_{i}^{1},\dots,\sigma_{i}^{d}\right) , where each \sigma_{i}^{k}\in\mathbb{R}/2\pi\mathbb{Z} . A natural embedding is obtained as the product of d circle embeddings F\left(\sigma_{i}\right)=\left(\cos\sigma_{i}^{1},\sin\sigma_{i}^{1},\dots,\cos\sigma_{i}^{d},\sin\sigma_{i}^{d}\right)\in\mathbb{R}^{2d}. (61) We define A to be block-diagonal with d copies of J on the diagonal, which yields a phase-lag operator that acts independently on each angular component. The projected coupling then gives a system of d coupled Kuramoto-type equations for the vector \left(\sigma_{i}^{1},\dots,\sigma_{i}^{d}\right) , which can be interpreted as a vector-phase or multi-frequency Kuramoto model on \mathbb{T}^{d} . Kuramoto models on Stiefel and rotation manifolds. For synchronization of matrices with orthogonality constraints, we define M as a matrix manifold such as the real Stiefel manifold 18 \mathrm{St}\left(p,n\right)=\left\{X\in\mathbb{R}^{n\times p}:X^{\mathsf{T}}X=I_{p}\right\} or the special orthogonal group \mathrm{SO}\left(n\right) 32 . The embedding is the canonical matrix inclusion F\left(X\right)=X into \mathbb{R}^{n\times p} (or into \mathbb{R}^{n\times n} for \mathrm{SO}\left(n\right) ). A direct choice of phase-lag operator is A\left(X\right)=BX with B\in\mathfrak{so}\left(n\right) fixed, such that \left(I-\alpha A\right)X_{j}=X_{j}-\alpha BX_{j} realizes a matrix-valued phase shift along the group direction generated by B . The projection \mathsf{P}^{\perp}_{\sigma_{i}} enforces the orthogonality constraint and Eq. ( 3 ) recovers Kuramoto-type consensus dynamics on Stiefel or rotation manifolds 53 ; 52 ; 71 . Lohe and unitary Kuramoto models. To describe synchronization of unitary matrices, we define M as a unitary matrix group (e.g., \mathrm{U}\left(d\right) or \mathrm{SU}\left(d\right) 32 ) and embed each unitary U\in\mathrm{U}\left(d\right) as F\left(U\right)=U in \mathbb{C}^{d\times d}\cong\mathbb{R}^{2d^{2}} . The Lie algebra \mathfrak{u}\left(d\right) consists of skew-Hermitian matrices 32 and we let A\in\mathfrak{u}\left(d\right) act on U by left or right multiplication. The factor \left(I-\alpha A\right)U_{j} then implements a linearized phase-lag along the group direction generated by A . The projected coupling reproduces Lohe-type matrix models and quantum Kuramoto ensembles on unitary groups 24 ; 28 ; 29 ; 38 ; 39 ; 30 ; 26 ; 25 ; 31 ; 66 ; 48 ; 27 . Network-distributed Kuramoto models on M . Finally, the same manifold framework applies when oscillators are coupled through a network instead of a global mean field. In this case, the global scalar coupling strength K in Eq. ( 3 ) is replaced by a weighted adjacency matrix K_{ij}\in\mathbb{R} and the mean-field sum is replaced by \sum_{j=1}^{N}K_{ij}\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right) . For any of the choices of M , F and A described above, this definition creates the Kuramoto- or Kuramoto-Sakaguchi-type dynamics on complex networks, with the state manifold M encoding the internal symmetry and geometry of individual oscillators 63 ; 62 ; 14 ; 36 ; 37 ; 9 ; 50 ; 73 ; 40 ; 45 ; 16 ; 5 ; 55 ; 4 ; 69 ; 1 ; 60 ; 23 ; 22 ; 59 ; 54 ; 6 . Appendix C Continuum limit and kinetic equation In this appendix, we provide a formal derivation of the continuum limit for the general manifold-based Kuramoto-Sakaguchi model in Eqs. ( 3 ) and ( 5 ). The strategy follows the standard mean-field limit for the classic Kuramoto model on S^{1} and its generalizations 70 ; 24 , which can be adapted to the present geometric setting. To keep the derivation compact, we work in this appendix with the joint density on TM . The main-text notation is recovered by the factorization \varrho\left(\sigma,V,t\right)=\rho\left(\sigma,V,t\right)h\left(V\right) , where \rho is the conditional spatial density for a fixed intrinsic drift field and h\left(V\right) is the time-independent distribution of V . Empirical measure and weak formulation For a fixed number N of oscillators, the dynamics is defined by Eq. ( 3 ), which we recall here for convenience \displaystyle\frac{\mathsf{d}\sigma_{i}}{\mathsf{d}t} \displaystyle=V\left(\sigma_{i}\right)+\frac{K}{N}\sum_{j=1}^{N}\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right), (62) where \sigma_{i}\left(t\right)\in M denotes the oscillator state. The coupling is \displaystyle\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right) \displaystyle=\mathsf{P}^{\perp}_{\sigma_{i}}\left[\left(I-\alpha A\right)F\left(\sigma_{j}\right)\right], (63) where F:M\hookrightarrow\mathbb{R}^{D_{a}} is a fixed smooth embedding, \mathsf{P}^{\perp}_{\sigma_{i}}:\mathbb{R}^{D_{a}}\to T_{\sigma_{i}}M is the orthogonal projection, A\in\mathfrak{so}\left(D_{a}\right) is a skew-symmetric matrix, and \alpha\in\mathbb{R} is the phase-lag parameter. The empirical measure on TM associated with the configuration \left\{\left(\sigma_{i}\left(t\right),V_{i}\right)\right\}_{i=1}^{N} is defined by \displaystyle\nu_{t}^{N} \displaystyle=\frac{1}{N}\sum_{i=1}^{N}\delta_{\left(\sigma_{i}\left(t\right),V_{i}\right)}, (64) where \delta_{\left(\sigma,V\right)} is the Dirac mass on TM . By its construction, \nu_{t}^{N} is a probability measure on TM . The corresponding configuration-space empirical measure on M is the marginal \mu_{t}^{N}=\frac{1}{N}\sum_{i=1}^{N}\delta_{\sigma_{i}\left(t\right)} , which is obtained from \nu_{t}^{N} by integrating out V . To derive an evolution equation for \nu_{t}^{N} , we consider it in a weak form. Given a smooth function \Phi\in C^{\infty}\left(TM\right) , we define \displaystyle\left\langle\Phi,\nu_{t}^{N}\right\rangle \displaystyle=\int_{TM}\Phi\left(\sigma,V\right)\,\nu_{t}^{N}\left(\mathsf{d}\sigma\mathsf{d}V\right) \displaystyle=\frac{1}{N}\sum_{i=1}^{N}\Phi\left(\sigma_{i}\left(t\right),V_{i}\right) (65) Differentiating Eq. ( 65 ) with respect to t and using the chain rule on the manifold M , we can obtain \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\left\langle\Phi,\nu_{t}^{N}\right\rangle \displaystyle=\frac{1}{N}\sum_{i=1}^{N}\left\langle\nabla_{M}\Phi\left(\sigma_{i},V_{i}\right),\frac{\mathsf{d}\sigma_{i}}{\mathsf{d}t}\right\rangle_{g}, (66) where \nabla_{M}\Phi denotes the Riemannian gradient of \Phi and \left\langle\cdot,\cdot\right\rangle_{g} is the Riemannian inner product on T_{\sigma}M induced by the metric g . Substituting Eq. ( 62 ) into Eq. ( 66 ) and separating intrinsic and coupling contributions, we can obtain \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\left\langle\Phi,\nu_{t}^{N}\right\rangle=\frac{1}{N}\sum_{i=1}^{N}\left\langle\nabla_{M}\Phi\left(\sigma_{i},V_{i}\right),V\left(\sigma_{i}\right)\right\rangle_{g} \displaystyle+\frac{K}{N^{2}}\sum_{i=1}^{N}\sum_{j=1}^{N}\left\langle\nabla_{M}\Phi\left(\sigma_{i},V_{i}\right),\Gamma\left(\sigma_{i},\sigma_{j};\alpha\right)\right\rangle_{g}. (67) Based on the empirical measure defined in Eq. ( 64 ), the right side of Eq. ( 67 ) can be written as \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\left\langle\Phi,\nu_{t}^{N}\right\rangle \displaystyle=\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),V\left(\sigma\right)\right\rangle_{g}\nu_{t}^{N}\left(\mathsf{d}\sigma\mathsf{d}V\right) \displaystyle\quad+K\int_{TM}\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\right\rangle_{g} \displaystyle\qquad\qquad\qquad\qquad\nu_{t}^{N}\left(\mathsf{d}\sigma\mathsf{d}V\right)\,\nu_{t}^{N}\left(\mathsf{d}\sigma^{\prime}\mathsf{d}V^{\prime}\right). (68) Eq. ( 68 ) is the weak formulation of the finite- N dynamics in terms of the empirical measure \nu_{t}^{N} . Mean-field limit and continuity equation We now formally take the mean-field limit N\to\infty . We assume that the empirical measures \nu_{t}^{N} converge weakly to a Borel probability measure, i.e, \nu_{t} on M for each t\geq 0 \displaystyle\nu_{t}^{N} \displaystyle\xrightarrow[N\to\infty]{\ \mathrm{weakly}\ }\nu_{t}. (69) Eq. ( 69 ) holds in the sense that \left\langle\Phi,\nu_{t}^{N}\right\rangle\to\left\langle\Phi,\nu_{t}\right\rangle for all \Phi\in C^{\infty}\left(TM\right) . Based on Eq. ( 69 ), we can formally obtain the limit in Eq. ( 68 ) \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\left\langle\Phi,\nu_{t}\right\rangle=\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),V\left(\sigma\right)\right\rangle_{g}\nu_{t}\left(\mathsf{d}\sigma\mathsf{d}V\right) \displaystyle+K\int_{TM}\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\right\rangle_{g} \displaystyle\qquad\qquad\qquad\qquad\nu_{t}\left(\mathsf{d}\sigma\mathsf{d}V\right)\nu_{t}\left(\mathsf{d}\sigma^{\prime}\mathsf{d}V^{\prime}\right). (70) This is the weak formulation of the mean-field equation for the limit measure \mu_{t} . On the tangent bundle TM , it is natural to assume that \nu_{t} admits a density \rho\left(\sigma,V,t\right) with respect to the product of the Riemannian volume measure \mu\left(\mathsf{d}\sigma\right) on M and a reference measure \mathsf{d}V on each fiber T_{\sigma}M , i.e., \displaystyle\nu_{t}\left(\mathsf{d}\sigma\mathsf{d}V\right) \displaystyle=\rho\left(\sigma,V,t\right)\,\mu\left(\mathsf{d}\sigma\right)\mathsf{d}V, (71) with the normalization \displaystyle\int_{TM}\rho\left(\sigma,V,t\right)\,\mu\left(\mathsf{d}\sigma\right)\mathsf{d}V \displaystyle=1. (72) In terms of this density, the continuum order parameter takes the form \displaystyle r\left(t\right) \displaystyle=\int_{TM}\int_{M}F\left(\sigma^{\prime}\right)\,\rho\left(\sigma^{\prime},V^{\prime},t\right)\,\mathsf{d}\mu\left(\sigma^{\prime}\right)\mathsf{d}V^{\prime}. (73) Using the explicit form of the coupling in Eq. ( 63 ), the interaction contribution in Eq. ( 70 ) can be re-written as \displaystyle\int_{TM}\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\right\rangle_{g}\nu_{t}\left(\mathsf{d}\sigma\mathsf{d}V\right)\,\nu_{t}\left(\mathsf{d}\sigma^{\prime}\mathsf{d}V^{\prime}\right) \displaystyle= \displaystyle\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),\int_{TM}\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\,\nu_{t}\left(\mathsf{d}\sigma^{\prime}\mathsf{d}V^{\prime}\right)\right\rangle_{g} \displaystyle= \displaystyle\int_{TM}\left\langle\nabla_{M}\Phi\left(\sigma,V\right),\int_{TM}\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\,\rho\left(\sigma^{\prime},V^{\prime},t\right)\,\mathsf{d}\mu\left(\sigma^{\prime}\right)\mathsf{d}V^{\prime}\right\rangle_{g}\mathsf{d}\nu_{t}\left(\sigma,V\right), (74) where we have used Eq. ( 71 ) in the last line. By substituting Eq. ( 63 ) into the inner integral in Eq. ( 74 ) and using the linearity of \mathsf{P}_{\sigma}^{\perp} and \left(I-\alpha A\right) with respect to F\left(\sigma^{\prime}\right) , we can obtain \displaystyle\int_{TM}\Gamma\left(\sigma,\sigma^{\prime};\alpha\right)\,\rho\left(\sigma^{\prime},V^{\prime},t\right)\,\mathsf{d}\mu\left(\sigma^{\prime}\right)\mathsf{d}V^{\prime} \displaystyle=\int_{TM}\mathsf{P}_{\sigma}^{\perp}\left[\left(I-\alpha A\right)F\left(\sigma^{\prime}\right)\right]\rho\left(\sigma^{\prime},V^{\prime},t\right)\,\mathsf{d}\mu\left(\sigma^{\prime}\right)\mathsf{d}V^{\prime} \displaystyle=\mathsf{P}_{\sigma}^{\perp}\left[\left(I-\alpha A\right)\int_{TM}F\left(\sigma^{\prime}\right)\,\rho\left(\sigma^{\prime},V^{\prime},t\right)\,\mathsf{d}\mu\left(\sigma^{\prime}\right)\mathsf{d}V^{\prime}\right] \displaystyle=\mathsf{P}_{\sigma}^{\perp}\left(r\left(t\right)-\alpha Ar\left(t\right)\right), (75) where we have used the definition of the order parameter in Eq. ( 73 ) in the last step. This shows explicitly that, in the mean–field limit, the averaged coupling can be expressed in terms of the order parameter as the projected field \mathsf{P}_{\sigma}^{\perp}\left(r\left(t\right)-\alpha Ar\left(t\right)\right) , which is precisely the coupling structure used in Eq. ( 11 ) in our main text. After substituting Eq. ( 71 ) and Eqs. ( 74 - 75 ) into Eq. ( 70 ) and integrating by parts on M with respect to the Riemannian volume \mu\left(\mathsf{d}\sigma\right) (based on that M is compact and without boundary), we can obtain the weak formulation \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}\int_{TM}\Phi\left(\sigma,V\right)\,\rho\left(\sigma,V,t\right)\,\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V \displaystyle= \displaystyle-\int_{TM}\Phi\left(\sigma,V\right)\,\nabla_{M}\cdot\left(\rho\left(\sigma,V,t\right)\,\mathbf{v}\left(\sigma,V,t\right)\right)\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V, (76) where the mean–field velocity field on TM is given by \displaystyle\mathbf{v}\left(\sigma,V,t\right) \displaystyle=V\left(\sigma\right)+K\,\mathsf{P}_{\sigma}^{\perp}\left(r\left(t\right)-\alpha Ar\left(t\right)\right) (77) according to our analysis of the averaged coupling. Because Eq. ( 76 ) holds for all smooth functions \Phi\in C^{\infty}\left(TM\right) , it is equivalent to the continuity equation on TM \displaystyle\frac{\partial}{\partial t}\rho\left(\sigma,V,t\right)+\nabla_{M}\cdot\left(\rho\left(\sigma,V,t\right)\,\mathbf{v}\left(\sigma,V,t\right)\right) \displaystyle=0, (78) where \mathbf{v}\left(\sigma,V,t\right) is given by Eq. ( 77 ). Eq. ( 78 ) serves as the kinetic equation underlying the macroscopic model Eqs. ( 12 - 14 ). The associated normalization \int_{TM}\rho\left(\sigma,V,t\right)\,\mathsf{d}\mu\left(\sigma\right)\mathsf{d}V=1 is preserved for all t . Appendix D Local bifurcation reduction of the order-parameter response equation In this appendix, we provide the technical reduction used in Subsec. III.3 . This appendix has two purposes. The first purpose is to derive the scalar amplitude equation near the incoherent state. The second purpose is to state explicit conditions under which the cubic coefficient becomes a local integral over M . We assume that the steady order-parameter response near the incoherent state is described by the equation \displaystyle G\left(K,r\right)=\mathcal{L}\left(K\right)r+\mathcal{N}\left(K,r\right)=0, (79) on a Banach space X of admissible order-parameter perturbations, with G\in C^{4} in a neighborhood of \left(K_{c},0\right) and G\left(K,0\right)=0 . Let \displaystyle L_{c}=\mathrm{D}_{r}G\left(K_{c},0\right), (80) and assume that L_{c} is Fredholm of index 0 . We assume that \ker L_{c}=\operatorname{span}\left\{r_{c}\right\} is one-dimensional. We assume that the adjoint kernel is generated by r_{c}^{\dagger} . We normalize the dual pairing by \langle r_{c}^{\dagger},r_{c}\rangle=1 . We also assume that the corresponding simple eigenvalue satisfies the transversality condition \displaystyle\lambda\left(K_{c}\right)=0,\qquad\lambda^{\prime}\!\left(K_{c}\right)\neq 0. (81) These assumptions describe a standard codimension-one instability. The critical mode r_{c} is the only neutral collective direction at K_{c} . The remaining directions are determined by this mode near onset. The transversality condition states that the instability is crossed at a nonzero rate when K passes through K_{c} . We introduce the spectral projectors P\left[f\right]=r_{c}\langle r_{c}^{\dagger},f\rangle and Q=I-P , and decompose \displaystyle r=a\,r_{c}+w,\qquad\langle r_{c}^{\dagger},w\rangle=0. (82) Expanding the nonlinear part at K=K_{c} gives \displaystyle\mathcal{N}\left(K_{c},r\right)=\mathcal{N}_{2}\left(r,r\right)+\mathcal{N}_{3}\left(r,r,r\right)+O\left(\|r\|_{X}^{4}\right), (83) where \mathcal{N}_{2} and \mathcal{N}_{3} are the symmetric multilinear Taylor coefficients. To exclude a transcritical-type correction in the scalar normal form, we further impose the condition \displaystyle\Big\langle r_{c}^{\dagger},\mathcal{N}_{2}\left(r_{c},r_{c}\right)\Big\rangle=0. (84) Eq. ( 84 ) is automatic whenever the steady response equation is odd under r\mapsto-r . In more general settings, we impose Eq. ( 84 ) as an additional condition. Eq. ( 84 ) states that the incoherent state has no preferred sign along the critical mode at quadratic order. The range equation then yields \displaystyle w\left(a;K\right)= \displaystyle a^{2}w_{2}+O\left(a^{3}\right)+O\left(\left|K-K_{c}\right|a\right), \displaystyle w_{2}= \displaystyle-\left(QL_{c}Q\right)^{-1}Q\,\mathcal{N}_{2}\left(r_{c},r_{c}\right). (85) The correction w_{2} is the stable component generated by the quadratic self-interaction of the critical mode. Eq. ( 85 ) shows that w_{2} is not an independent degree of freedom. The stable part is determined by the critical amplitude. Eq. ( 85 ) then enters the kernel equation and yields the reduced amplitude equation \displaystyle\Psi\left(a;K\right) \displaystyle=\lambda\left(K\right)a+\Lambda_{3}a^{3} \displaystyle\quad+O\left(a^{4}\right)+O\left(\left|K-K_{c}\right|a^{2}\right)=0, (86) with \displaystyle\Lambda_{3}=\Big\langle r_{c}^{\dagger},\,\mathcal{N}_{3}\left(r_{c},r_{c},r_{c}\right)+2\mathcal{N}_{2}\left(r_{c},w_{2}\right)\Big\rangle. (87) Eq. ( 86 ) is the technical statement used in Subsec. III.3 . Eq. ( 87 ) shows that the cubic coefficient contains a direct cubic term and a mixed term produced by the stable correction. Moreover, Eq. ( 81 ) implies the local expansion \displaystyle\lambda\left(K\right)=\lambda^{\prime}\!\left(K_{c}\right)\left(K-K_{c}\right)+O\left(\left(K-K_{c}\right)^{2}\right), (88) so every nontrivial small-amplitude branch with \Lambda_{3}\neq 0 satisfies \displaystyle\left|a\right|\sim\sqrt{-\frac{\lambda\left(K\right)}{\Lambda_{3}}}=\sqrt{-\frac{\lambda^{\prime}\!\left(K_{c}\right)\left(K-K_{c}\right)}{\Lambda_{3}}}. (89) Eq. ( 89 ) is the usual square-root scaling near a cubic bifurcation. We next connect Eq. ( 87 ) with the topology of M . We introduce the induced critical tangent field \displaystyle u_{c}\left(\sigma\right) \displaystyle=\mathsf{P}_{\sigma}^{\perp}\left(r_{c}-\alpha Ar_{c}\right). (90) This field is the relevant geometric object for the nonlinear transport. The microscopic velocity in Eq. ( 11 ) depends on the order parameter through the projected field \mathsf{P}_{\sigma}^{\perp}\left(r-\alpha Ar\right) . For this reason, the topological content of the critical response is carried by u_{c} . For any stable correction w\in QX , we also define the induced tangent field \displaystyle\widetilde{u}_{w}\left(\sigma\right) \displaystyle=\mathsf{P}_{\sigma}^{\perp}\left(w-\alpha Aw\right). (91) We now give a sufficient set of conditions under which the cubic coefficient becomes pointwise local. Locality and symmetry conditions.- Let \mathcal{S}_{2}\left(u_{c}\right)\subset QX denote the set of stable corrections w with the following property. The induced tangent field \widetilde{u}_{w}\left(\sigma\right) can be written pointwise as S\left(\sigma\right)\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right] for some S\in\Gamma\left(\operatorname{Sym}^{2}T^{\ast}M\otimes TM\right) . This set collects the local quadratic tensor sector generated by the critical field. This set is natural in our model. The microscopic transport acts locally on M . The homogeneous structure organizes tensor fields by symmetry type. We first require the direct cubic contribution to be local in the induced tangent field. This requirement states that the direct cubic response is assembled from a pointwise cubic density on M . Concretely, we assume that there exists a smooth symmetric trilinear tensor field T_{3,0}\left(\sigma\right) such that \displaystyle\Big\langle r_{c}^{\dagger},\mathcal{N}_{3}\left(r_{c},r_{c},r_{c}\right)\Big\rangle \displaystyle= \displaystyle\int_{M}T_{3,0}\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right]\mathsf{d}\mu\left(\sigma\right), (92) We next require the quadratic source to stay inside the local quadratic sector. We also require the stable inverse to preserve that sector: \displaystyle Q\,\mathcal{N}_{2}\left(r_{c},r_{c}\right)\in\mathcal{S}_{2}\left(u_{c}\right). (93) \displaystyle\left(QL_{c}Q\right)^{-1}\mathcal{S}_{2}\left(u_{c}\right)\subseteq\mathcal{S}_{2}\left(u_{c}\right). (94) These conditions imply that the stable correction produced by the quadratic self-interaction remains local and quadratic in u_{c} . Therefore there exists a smooth symmetric bilinear bundle map S_{2}\left(\sigma\right) . This map satisfies \displaystyle\widetilde{u}_{w_{2}}\left(\sigma\right) \displaystyle=S_{2}\left(\sigma\right)\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right]. (95) We finally require the mixed quadratic contribution to be local in the pair \left(u_{c},\widetilde{u}_{w}\right) . This requirement states that the interaction between the critical mode and the stable correction is still evaluated pointwise on M . We therefore assume that there exists a smooth bilinear form B\left(\sigma\right) . This form satisfies the following relation for every w\in\mathcal{S}_{2}\left(u_{c}\right) : \displaystyle\Big\langle r_{c}^{\dagger},\mathcal{N}_{2}\left(r_{c},w\right)\Big\rangle=\int_{M}B\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),\widetilde{u}_{w}\left(\sigma\right)\right]\,\mathsf{d}\mu\left(\sigma\right). (96) Eq. ( 95 ) turns Eq. ( 96 ) into \displaystyle\Big\langle r_{c}^{\dagger},\mathcal{N}_{2}\left(r_{c},w_{2}\right)\Big\rangle \displaystyle=\int_{M}T_{3,1}\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right] \displaystyle\quad\,\mathsf{d}\mu\left(\sigma\right), (97) The tensor field T_{3,1}\left(\sigma\right) is obtained by symmetrizing the contraction of B\left(\sigma\right) with S_{2}\left(\sigma\right) . Eqs. ( 87 ), ( 92 ), and ( 97 ) then give \displaystyle\Lambda_{3} \displaystyle=\int_{M}T\left(\sigma\right)\!\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right]\mathsf{d}\mu\left(\sigma\right), (98) with T=T_{3,0}+2T_{3,1} . This is precisely the local tensor representation used in Subsec. III.3 . The three conditions above state that the direct cubic term, the quadratic correction, and their mixed contribution all preserve the local tensor structure selected by the projected tangent field. A convenient sufficient criterion for Eq. ( 94 ) comes from symmetry. We assume that the quadratic source generated by u_{c}\otimes u_{c} belongs to a finite-dimensional G -invariant harmonic sector for the transitive isometry group G of M . We also assume that QL_{c}Q is G -equivariant on that sector. If that sector is irreducible, Schur’s lemma 32 implies that QL_{c}Q acts there as a scalar multiple of the identity. The inverse then preserves the local tensor structure, and Eq. ( 95 ) follows automatically. This criterion is natural on homogeneous manifolds. The linearized transport operator and the tensor decomposition are both controlled by the same symmetry group. Under these locality and symmetry conditions, Subsec. III.3 reduces the global bifurcation problem to the topology of the induced tangent field, while Appendix E supplies the additional sign condition needed to pass from the forced zeros of u_{c} to the definite sign of \Lambda_{3} . Appendix E Sign condition for the cubic coefficient In this appendix, we state the additional sign condition used in Subsec. III.3 . Appendix D shows that the cubic coefficient can be written as a local integral over M . We now explain how the zeros of u_{c} can force the sign of that integral. We write the cubic density in Eq. ( 38 ) as \displaystyle q\left(\sigma\right) \displaystyle=T\left(\sigma\right)\left[u_{c}\left(\sigma\right),u_{c}\left(\sigma\right),u_{c}\left(\sigma\right)\right], (99) The density q\left(\sigma\right) measures the local contribution of the critical tangent field to the cubic coefficient. The coefficient \Lambda_{3} is the integral of this density: \displaystyle\Lambda_{3}=\int_{M}q\left(\sigma\right)\mathsf{d}\mu\left(\sigma\right). (100) We assume that the zero set of u_{c} consists of isolated points \left\{p_{1},\dots,p_{m}\right\} . This situation is generic for a smooth vector field after a small perturbation. For each zero p_{\ell} , we choose a geodesic ball B_{\varepsilon}\left(p_{\ell}\right) 43 . This ball contains no other zeros. As \varepsilon\downarrow 0 , we require that the local contribution to the cubic integral around each zero satisfies \displaystyle\int_{B_{\varepsilon}\left(p_{\ell}\right)}q\left(\sigma\right)\mathsf{d}\mu\left(\sigma\right)=-\gamma_{\ell}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)+o\left(1\right). (101) The coefficient \gamma_{\ell}>0 is independent of \varepsilon . Eq. ( 101 ) states that the leading contribution near each zero is proportional to the local index. The coefficient \gamma_{\ell} measures the strength of this contribution. The sign is fixed by the chosen orientation convention. We denote the complement of the zero neighborhoods by M_{\varepsilon}=M\setminus\bigcup_{\ell=1}^{m}B_{\varepsilon}\left(p_{\ell}\right) . We also require that the regular contribution on M_{\varepsilon} is controlled. More precisely, there exists \varepsilon_{0}>0 such that, for every 0<\varepsilon<\varepsilon_{0} , \displaystyle\left|\int_{M_{\varepsilon}}q\left(\sigma\right)\mathsf{d}\mu\left(\sigma\right)\right|<\sum_{\ell=1}^{m}\gamma_{\ell}. (102) Eq. ( 102 ) states that the regular contribution away from the zeros does not overwhelm the indexed contributions created near the zeros. Under these conditions, Eq. ( 100 ) can be decomposed as \displaystyle\Lambda_{3}=-\sum_{\ell=1}^{m}\gamma_{\ell}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)+\mathcal{R}_{\varepsilon}, (103) The remainder \mathcal{R}_{\varepsilon} collects the o\left(1\right) terms from Eq. ( 101 ) and the regular remainder from Eq. ( 102 ). The Poincaré-Hopf theorem 56 gives \sum_{\ell=1}^{m}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)=\chi\left(M\right) . Therefore, if \chi\left(M\right)\neq 0 and the chosen orientation convention makes \displaystyle\sum_{\ell=1}^{m}\gamma_{\ell}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)>0, (104) then Eq. ( 103 ) yields \Lambda_{3}<0 . This is the additional sign condition used in the main text when we pass from the topological obstruction created by the zeros of u_{c} to a definite subcritical sign of the cubic normal-form coefficient. When \chi\left(M\right)=0 , the above sign conclusion is unavailable. In that case the sign of \Lambda_{3} must be determined from the analytic structure of T\left(\sigma\right) and from the detailed nonlinear reduction. Appendix F Dynamical normal form and weak-field scaling In this appendix, we record two direct consequences of the reduction derived in Appendix D . The first consequence is a scalar dynamical normal form near the critical coupling. The second consequence is the standard weak-field scaling law near a continuous branch. These statements do not add a new topological mechanism. They use the same one-dimensional reduction that already underlies Subsec. III.3 . Dynamical normal form.- We assume that the local order-parameter dynamics near the incoherent state is generated by the same response map as in Appendix D . More precisely, we assume that \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}r=-G\left(K,r\right), (105) where G\left(K,r\right) is defined by Eq. ( 79 ). We also assume that Eq. ( 105 ) admits a C^{3} local center manifold 33 at \left(K_{c},0\right) . The center manifold is tangent to \operatorname{span}\left\{r_{c}\right\} and uses the same critical mode as the steady reduction in Appendix D . Therefore the reduced center variable a satisfies \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}a \displaystyle=-\Psi\left(a;K\right) \displaystyle=-\lambda\left(K\right)a-\Lambda_{3}a^{3} \displaystyle\quad+O\left(a^{4}\right)+O\left(\left|K-K_{c}\right|a^{2}\right), (106) where \Psi\left(a;K\right) is the steady reduced equation in Eq. ( 86 ). Hence the equilibria of Eq. ( 106 ) are exactly the small-amplitude steady branches already studied in Subsec. III.3 . Let a_{\ast}\left(K\right) be a stable equilibrium of Eq. ( 106 ). Linearizing Eq. ( 106 ) around a_{\ast}\left(K\right) gives the local relaxation rate \displaystyle\tau^{-1}\left(K\right)=\left|\partial_{a}\Psi\left(a_{\ast}\left(K\right);K\right)\right|. (107) For the incoherent branch a_{\ast}=0 , Eq. ( 107 ) gives \displaystyle\tau^{-1}\left(K\right)=\left|\lambda\left(K\right)\right|+o\left(\left|K-K_{c}\right|\right), (108) and therefore \displaystyle\tau\left(K\right)\sim\left|\lambda\left(K\right)\right|^{-1}\sim\left|K-K_{c}\right|^{-1}. (109) This is the usual critical slowing-down law. When a continuous branch exists, Eq. ( 89 ) gives a_{\ast}^{2}\left(K\right)=-\lambda\left(K\right)/\Lambda_{3}+o\left(\lambda\right) . Substituting this relation into Eq. ( 107 ) yields \displaystyle\tau^{-1}\left(K\right) \displaystyle=\left|\lambda\left(K\right)+3\Lambda_{3}a_{\ast}^{2}\left(K\right)\right| \displaystyle=2\left|\lambda\left(K\right)\right|+o\left(\left|K-K_{c}\right|\right), (110) so the same scaling \tau\sim\left|K-K_{c}\right|^{-1} holds on the continuous branch. Weak-field scaling.- We next add a weak external bias in the critical direction. We assume that the full response equation takes the form \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}r=-G\left(K,r\right)+h\,\eta, (111) where \eta\in X is a fixed bias direction with \langle r_{c}^{\dagger},\eta\rangle\neq 0 . After rescaling the field amplitude h , the reduced steady equation on the center manifold becomes \displaystyle\Psi_{h}\left(a;K\right) \displaystyle=\lambda\left(K\right)a+\Lambda_{3}a^{3}-h \displaystyle\quad+O\left(a^{4}\right)+O\left(\left|K-K_{c}\right|a^{2}\right)+O\left(\left|h\right|\left|a\right|\right) \displaystyle=0. (112) At the critical coupling K=K_{c} , Eq. ( 112 ) gives \displaystyle\left|a\right|\sim\left|\frac{h}{\Lambda_{3}}\right|^{1/3}, (113) provided \Lambda_{3}\neq 0 . This is the standard mean-field field-response law, so the exponent is \delta=3 . When h=0 and a continuous branch exists, Eq. ( 89 ) already gives \displaystyle\left|a_{\ast}\left(K\right)\right|\sim\left|K-K_{c}\right|^{1/2}, (114) so the order-parameter exponent is \beta=1/2 . To obtain the differential susceptibility, we differentiate Eq. ( 112 ) with respect to h along a steady branch. This gives \displaystyle\frac{\partial}{\partial h}a_{\ast}=\left(\lambda\left(K\right)+3\Lambda_{3}a_{\ast}^{2}\left(K\right)\right)^{-1}+o\left(\left|K-K_{c}\right|^{-1}\right). (115) On the incoherent side, where a_{\ast}=0 , Eq. ( 115 ) gives \displaystyle\frac{\partial}{\partial h}a_{\ast}\sim\lambda\left(K\right)^{-1}. (116) On a continuous branch, Eq. ( 89 ) and Eq. ( 115 ) give \displaystyle\frac{\partial}{\partial h}a_{\ast}\sim\left(-2\lambda\left(K\right)\right)^{-1}. (117) Therefore, on both sides of a continuous transition, \displaystyle\left|\frac{\partial}{\partial h}a_{\ast}\right|\sim\left|K-K_{c}\right|^{-1}, (118) which is the standard mean-field susceptibility law \gamma=1 . The present one-dimensional reduction therefore gives the usual mean-field triplet \beta=\frac{1}{2} , \gamma=1 , and \delta=3 whenever a continuous branch exists. In the present theory, topology does not change these exponents at the generic codimension-one level. Instead, topology acts by constraining the sign of \Lambda_{3} and therefore by constraining whether the continuous branch described by Eqs. ( 113 )-( 118 ) can actually occur. Under the sign condition in Appendix E , a manifold with \chi\left(M\right)\neq 0 does not allow that continuous branch to occur by topology. A manifold with \chi\left(M\right)=0 allows it. Appendix G Quintic normal form and hysteresis scales In this appendix, we extend the local reduction to quintic order. This extension is useful when the cubic coefficient is negative and the continuous branch is therefore not allowed to occur by topology. The cubic normal form then does not determine the stable large-amplitude branch by itself. The hysteresis analysis only needs one additional property beyond Appendix D . The reduced scalar equation must be odd up to quintic order: \displaystyle\Psi\left(-a;K\right)=-\Psi\left(a;K\right)+O\left(a^{7}\right)+O\left(\left|K-K_{c}\right|a^{3}\right). (119) This condition is natural when the reduced order parameter has no preferred sign and no external bias is present. The amplitudes a and -a describe the same critical mode with opposite sign. In the absence of an external field or built-in chirality, the reduced dynamics should not distinguish them. A weaker sufficient condition at the model level is a local \mathbb{Z}_{2} symmetry of the response map near the incoherent state. Assume that there exists a bounded linear involution \mathcal{R}:X\to X such that \displaystyle\mathcal{R}^{2}=I,\qquad G\left(K,\mathcal{R}r\right)=\mathcal{R}G\left(K,r\right),\qquad\mathcal{R}r_{c}=-r_{c}. Then L_{c} commutes with \mathcal{R} . The local center manifold can be chosen \mathcal{R} -invariant. The amplitude coordinate changes from a to -a . The reduced scalar equation is therefore odd. Eq. ( 119 ) follows. This condition is weaker than G\left(K,-r\right)=-G\left(K,r\right) . This condition is also weaker than assuming a specific involutive isometry of M . A manifold isometry is only one concrete realization of this local \mathbb{Z}_{2} symmetry. If Eq. ( 119 ) fails, the reduced scalar equation contains even terms. The two signs of a are then not equivalent. The local bifurcation becomes imperfect or asymmetric. The symmetric branch formulas derived below do not hold in the same form. Eq. ( 119 ) is enough for the quintic normal form and for the hysteresis scalings derived below. We now keep the general Taylor expansion of \mathcal{N}\left(K_{c},r\right) up to quintic order. We also assume that G\in C^{7} in a neighborhood of \left(K_{c},0\right) , so the reduced equation admits a controlled quintic expansion. The range correction then has the form \displaystyle w\left(a;K\right) \displaystyle=a^{2}w_{2}+a^{3}w_{3}+a^{4}w_{4} \displaystyle\qquad+O\left(a^{5}\right)+O\left(\left|K-K_{c}\right|a\right). (120) Here w_{2} is given by Eq. ( 85 ). The coefficients w_{3},w_{4}\in QX satisfy \displaystyle w_{3}=-\left(QL_{c}Q\right)^{-1}Q\left(2\mathcal{N}_{2}\left(r_{c},w_{2}\right)+\mathcal{N}_{3}\left(r_{c},r_{c},r_{c}\right)\right), (121) and \displaystyle w_{4} \displaystyle=-\left(QL_{c}Q\right)^{-1}Q\Big(\mathcal{N}_{2}\left(w_{2},w_{2}\right)+2\mathcal{N}_{2}\left(r_{c},w_{3}\right) \displaystyle\qquad+3\mathcal{N}_{3}\left(r_{c},r_{c},w_{2}\right) \displaystyle\qquad+\mathcal{N}_{4}\left(r_{c},r_{c},r_{c},r_{c}\right)\Big). (122) Substituting Eqs. ( 120 )-( 122 ) into the kernel equation yields the quintic normal form \displaystyle\Psi_{5}\left(a;K\right) \displaystyle=\lambda\left(K\right)a+\Lambda_{3}a^{3}+\Lambda_{5}a^{5} \displaystyle\quad+O\left(a^{7}\right)+O\left(\left|K-K_{c}\right|a^{3}\right)=0, (123) where \Lambda_{3} is still given by Eq. ( 87 ), and \displaystyle\Lambda_{5} \displaystyle=\Big\langle r_{c}^{\dagger},\mathcal{N}_{5}\left(r_{c},r_{c},r_{c},r_{c},r_{c}\right) \displaystyle\qquad+4\mathcal{N}_{4}\left(r_{c},r_{c},r_{c},w_{2}\right)+3\mathcal{N}_{3}\left(r_{c},r_{c},w_{3}\right) \displaystyle\qquad+3\mathcal{N}_{3}\left(r_{c},w_{2},w_{2}\right)+2\mathcal{N}_{2}\left(r_{c},w_{4}\right) \displaystyle\qquad+2\mathcal{N}_{2}\left(w_{2},w_{3}\right)\Big\rangle. (124) Eq. ( 119 ) removes the quadratic and quartic terms from the reduced scalar equation. Eq. ( 119 ) does not require w_{2} or w_{4} to vanish. Therefore the hysteresis analysis only needs Eq. ( 123 ) together with the sign condition \Lambda_{5}>0 . The explicit form of \Lambda_{5} changes, but the later formulas do not. Eq. ( 124 ) also shows why a universal topological sign rule for \Lambda_{5} is unavailable in the present framework. Unlike \Lambda_{3} , the quintic coefficient depends on the slaved corrections w_{2},w_{3},w_{4} and on the higher multilinear forms \mathcal{N}_{2} - \mathcal{N}_{5} . These objects are fixed by the analytic structure of the transport law. They are not fixed by the zero set of u_{c} alone. One may, for example, add a local quintic perturbation proportional to \langle r_{c}^{\dagger},r\rangle^{5}r_{c} . Such a perturbation changes \Lambda_{5} . It does not change L_{c} , the topology of M , or the cubic sign statement in Appendix E . Therefore topology alone does not determine the sign of the general coefficient \Lambda_{5} . To obtain a shorter coefficient formula, we now add one more simplification. We assume that the nonlinear Taylor expansion along the critical branch contains no even terms up to quintic order: \displaystyle\mathcal{N}\left(K_{c},r\right)=\mathcal{N}_{3}\left(r,r,r\right)+\mathcal{N}_{5}\left(r,r,r,r,r\right)+O\left(\|r\|_{X}^{7}\right). (125) Under Eq. ( 125 ), Eq. ( 87 ) simplifies because w_{2}=0 . Eqs. ( 120 )-( 122 ) then reduce to \displaystyle w\left(a;K\right)=a^{3}w_{3}+O\left(a^{5}\right)+O\left(\left|K-K_{c}\right|a\right), \displaystyle w_{3}=-\left(QL_{c}Q\right)^{-1}Q\,\mathcal{N}_{3}\left(r_{c},r_{c},r_{c}\right). In that case, Eq. ( 124 ) becomes \displaystyle\Lambda_{5}=\Big\langle r_{c}^{\dagger},\mathcal{N}_{5}\left(r_{c},r_{c},r_{c},r_{c},r_{c}\right)+3\mathcal{N}_{3}\left(r_{c},r_{c},w_{3}\right)\Big\rangle. (126) Eq. ( 123 ) is the quintic extension of Eq. ( 86 ). Eq. ( 126 ) is only a compact special case of the general coefficient formula in Eq. ( 124 ). Eq. ( 123 ) is the appropriate local normal form when the cubic term is not sufficient to describe the stable large-amplitude branch. We now assume \lambda^{\prime}\!\left(K_{c}\right)>0 and \Lambda_{3}<0<\Lambda_{5} . This is the subcritical situation selected by Appendix E when \chi\left(M\right)\neq 0 and the quintic term stabilizes the large-amplitude branch. For nontrivial equilibria, Eq. ( 123 ) reduces to \displaystyle\lambda\left(K\right)+\Lambda_{3}x+\Lambda_{5}x^{2}=0,\qquad x:=a^{2}>0. (127) Therefore the two nonzero branches are \displaystyle x_{\pm}\left(K\right)=\frac{-\Lambda_{3}\pm\sqrt{\Lambda_{3}^{2}-4\Lambda_{5}\lambda\left(K\right)}}{2\Lambda_{5}}. (128) The reduced dynamics in Appendix F gives \displaystyle\frac{\mathsf{d}}{\mathsf{d}t}a=-\Psi_{5}\left(a;K\right)+O\left(a^{7}\right)+O\left(\left|K-K_{c}\right|a^{3}\right). (129) Linearizing Eq. ( 129 ) along a nonzero branch gives \displaystyle\partial_{a}\Psi_{5}\left(a;K\right)=2a^{2}\left(\Lambda_{3}+2\Lambda_{5}a^{2}\right)+O\left(a^{6}\right). (130) Hence the branch x_{+}\left(K\right) is locally stable and the branch x_{-}\left(K\right) is locally unstable at leading order. The saddle-node point is determined by \Lambda_{3}+2\Lambda_{5}a^{2}=0 . Therefore \displaystyle x_{\mathrm{sn}}=-\frac{\Lambda_{3}}{2\Lambda_{5}},\qquad\lambda_{\mathrm{sn}}=\frac{\Lambda_{3}^{2}}{4\Lambda_{5}}. (131) Using Eq. ( 88 ), we obtain the leading-order spinodal location \displaystyle K_{\mathrm{sn}}-K_{c}\sim\frac{\Lambda_{3}^{2}}{4\lambda^{\prime}\!\left(K_{c}\right)\Lambda_{5}}. (132) This quantity is the local hysteresis width: \displaystyle\Delta K_{\mathrm{hys}}:=K_{\mathrm{sn}}-K_{c}\sim\frac{\Lambda_{3}^{2}}{4\lambda^{\prime}\!\left(K_{c}\right)\Lambda_{5}}. (133) At K=K_{c} , the stable large-amplitude branch satisfies \displaystyle\left|a_{\mathrm{jump}}\right|=\sqrt{-\frac{\Lambda_{3}}{\Lambda_{5}}}. (134) This is the jump amplitude when the incoherent branch loses stability at K=K_{c} . At the saddle-node point, the synchronized branch disappears with the smaller amplitude \displaystyle\left|a_{\mathrm{sn}}\right|=\sqrt{-\frac{\Lambda_{3}}{2\Lambda_{5}}}. (135) Therefore, under the additional condition \Lambda_{5}>0 , the topological sign statement for \Lambda_{3} obtained in Appendix E extends to a local description of the discontinuous regime: a non-zero Euler characteristic selects \Lambda_{3}<0 , while the positive quintic coefficient fixes the width of the hysteresis window and the size of the order-parameter jump. The same quintic normal form also refines the continuous regime. If \Lambda_{3}>0 and \lambda\left(K\right)<0 , the small supercritical branch of Eq. ( 127 ) satisfies \displaystyle x_{\mathrm{cont}}\left(K\right)=-\frac{\lambda\left(K\right)}{\Lambda_{3}}-\frac{\Lambda_{5}}{\Lambda_{3}^{3}}\lambda\left(K\right)^{2}+O\left(\lambda\left(K\right)^{3}\right). (136) Therefore \Lambda_{5} gives the first higher-order correction to the continuous branch. It does not change the generic mean-field exponents derived in Appendix F . Those exponents are still controlled by the cubic term. The role of \Lambda_{5} becomes leading only when \Lambda_{3}=0 . If that codimension-two situation occurs and \Lambda_{5}>0 , the transition is still continuous, but the scaling changes to \displaystyle\left|a_{\ast}\right|\sim\left(-\frac{\lambda\left(K\right)}{\Lambda_{5}}\right)^{1/4},\qquad\left|a\right|\sim\left|\frac{h}{\Lambda_{5}}\right|^{1/5}. (137) This is the usual tricritical scaling. In the present theory, topology does not force this tricritical point. Such a point can only arise when the cubic coefficient is not already fixed to a definite nonzero sign. Appendix H Critical defect count and charge balance In this appendix, we record the counting argument used in Subsec. III.4 . In the main text, the field u_{c} is read as the onset texture, its isolated zeros are the defect cores, and the local index is the corresponding defect charge. Let p_{1},\ldots,p_{N_{\mathrm{def}}} be the isolated zeros of the critical tangent field u_{c} . The Poincaré-Hopf theorem 56 gives \displaystyle\sum_{\ell=1}^{N_{\mathrm{def}}}\operatorname{ind}_{p_{\ell}}\left(u_{c}\right)=\chi\left(M\right). (138) Assume that each defect core is nondegenerate. Then each local charge is equal to +1 or -1 . Let N_{+} and N_{-} denote the numbers of positive and negative defect cores. Eq. ( 138 ) then becomes \displaystyle N_{+}-N_{-}=\chi\left(M\right). (139) Therefore the total number of simple critical defects satisfies \displaystyle N_{\mathrm{def}}=N_{+}+N_{-}\geq\left|\chi\left(M\right)\right|. (140) This is the generic counting statement used in the main text. When \chi\left(M\right)=0 , Eq. ( 139 ) gives N_{+}=N_{-} . Simple critical defects must therefore be charge neutral as a set. Under smooth parameter variation, the total index remains fixed, so simple defects can only be created or annihilated through events with zero net topological charge. When \chi\left(M\right)\neq 0 , Eq. ( 139 ) shows that a nonzero background charge remains in the onset texture. That net charge cannot be removed by local charge-neutral defect events. Appendix I Topology-conditioned accessibility of local onset scenarios In this appendix, we collect the logical consequences of Appendices E - G . The statements below concern only the local onset scenarios captured by the one-mode cubic and quintic reductions stated there. They do not claim a classification of the full global dynamics away from threshold. When symmetry produces a multidimensional critical space, these statements apply after selecting an individual symmetry-broken critical branch. The generic continuous branch in Appendix F requires \displaystyle\Lambda_{3}>0. (141) The tricritical continuous branch in Appendix G requires \displaystyle\Lambda_{3}=0,\qquad\Lambda_{5}>0. (142) The discontinuous branch with local hysteresis requires \displaystyle\Lambda_{3}<0,\qquad\Lambda_{5}>0. (143) Suppose that the sign condition of Appendix E holds. If \chi\left(M\right)\neq 0 , then Appendix E gives \displaystyle\Lambda_{3}<0. (144) Eq. ( 144 ) does not allow Eq. ( 141 ) or Eq. ( 142 ) to occur by topology. Therefore a non-zero Euler characteristic does not allow either the generic continuous or the tricritical continuous onset scenario in the present framework. Under the additional analytic condition \Lambda_{5}>0 , Eq. ( 143 ) remains as the local scenario selected near onset. If \chi\left(M\right)=0 , the sign of \Lambda_{3} is not fixed by topology. In that case topology allows Eq. ( 141 ), so a continuous onset is no longer forbidden by topology. The same zero-Euler condition also allows Eq. ( 142 ) and Eq. ( 143 ), so topology does not by itself select which local branch is realized. Their actual realization is then decided by the analytic coefficients of the reduced equation. This is the sense in which the topology of M acts as an accessibility constraint on local onset scenarios. Appendix J Geometric averages for the case studies In this appendix, we compute the averaged tangent projector used in Sec. IV . These calculations verify the explicit values of \kappa\left(M\right) quoted there. Hypersphere. Let M=S^{D-1}\subset\mathbb{R}^{D} with the standard embedding. The tangent projector at \sigma\in S^{D-1} is \displaystyle\mathsf{P}_{\sigma}^{\perp}=I_{D}-\sigma\sigma^{\top}. (145) Its average over the sphere is \displaystyle\overline{\mathsf{P}}_{S^{D-1}}:=\frac{1}{\textsf{Vol}\left(S^{D-1}\right)}\int_{S^{D-1}}\mathsf{P}_{\sigma}^{\perp}\,\mathsf{d}\mu\left(\sigma\right). (146) Rotational invariance implies \overline{\mathsf{P}}_{S^{D-1}}=c\,I_{D} for some scalar c . Taking the trace of Eq. ( 146 ) gives \displaystyle cD=\operatorname{tr}\left(\overline{\mathsf{P}}_{S^{D-1}}\right)=D-1, (147) so \displaystyle\overline{\mathsf{P}}_{S^{D-1}}=\frac{D-1}{D}I_{D},\qquad\kappa\left(S^{D-1}\right)=\frac{D-1}{D}. (148) Flat torus. Let M=\mathbb{T}^{d}=\left(S^{1}\right)^{d} with the standard product embedding \displaystyle F\left(\theta_{1},\ldots,\theta_{d}\right)=\left(\cos\theta_{1},\sin\theta_{1},\ldots,\cos\theta_{d},\sin\theta_{d}\right). (149) The tangent projector is block diagonal, \displaystyle\mathsf{P}_{\left(\theta_{1},\ldots,\theta_{d}\right)}^{\perp}=\operatorname{diag}\left(\mathsf{P}\left(\theta_{1}\right),\ldots,\mathsf{P}\left(\theta_{d}\right)\right). (150) where \displaystyle\mathsf{P}\left(\theta\right)=\begin{pmatrix}\sin^{2}\theta&-\sin\theta\cos\theta\\ -\sin\theta\cos\theta&\cos^{2}\theta\end{pmatrix}. (151) Averaging Eq. ( 151 ) over one circle gives \displaystyle\frac{1}{2\pi}\int_{0}^{2\pi}\mathsf{P}\left(\theta\right)\,\mathsf{d}\theta=\frac{1}{2}I_{2}. (152) Therefore \displaystyle\overline{\mathsf{P}}_{\mathbb{T}^{d}}=\frac{1}{2}I_{2d},\qquad\kappa\left(\mathbb{T}^{d}\right)=\frac{1}{2}. (153) Real Stiefel manifold. Let M=\mathrm{St}\left(p,n\right)\subset\mathbb{R}^{n\times p} with 2\leq p