The PLATO field selection process V. Nascimbeni {}^{\hrefhttps://orcid.org/0000-0001-9770-1214}, G. Piotto {}^{\hrefhttps://orcid.org/0000-0002-9937-6387}, V. Granata, S. Marinoni, P. M. Marrese, M. Montalto, J. Cabrera, C. Aerts, G. Altavilla, K. Belkacem, S. Benatti, M. Bergemann, A. Börner, G. Covone, M. Deleuil, S. Desidera, L. Gizon, M. J. Goupil, M. Günther, A. M. Heras, L. Malavolta, J. M. Mas-Hesse, D. Nardiello, H. P. Osborn, I. Pagano, C. Paproth, D. Pollacco, L. Prisinzano, R. Ragazzoni, G. Ramsay, H. Rauer, S. Udry, T. Zingales Abstract The PLanetary Transits and Oscillations of stars (PLATO) mission will begin its four-year nominal mission in early 2027 by monitoring its Long-duration Observation Phase field at South (LOPS2) for at least two years continuously. The primary aim of PLATO is a very ambitious and challenging one: the discovery of Earth-like planets in the habitable zone of nearby and bright solar analogues. To this purpose, the PLATO Mission Consortium, through its Ground-based Observing Program (GOP), will perform the follow-up needed to confirm part of the candidate planets photometrically detected by PLATO and measure their masses through radial velocity curves. For the LOPS2, the GOP is committed (as part of the PLATO mission) to follow-up the candidate exoplanets discovered orbiting the 15 000 15\,000 high-quality target subset of the PLATO Input Catalog (PIC) known as the Prime Sample (PS). The PS will be made public nine months before launch in the context of the first Guest Observer (GO) call for proposals to be issued by the European Space Agency (ESA). Here, we present the quantitative metrics and thresholds defined to select and prioritize the PS. Our method is perfectly general and suitable to rank any list of stars surveyed for transiting planets. We also describe the astrophysical properties of the LOPS2 PS, both in a statistical sense and for some specific targets of interest. III. Selection of the Prime Sample for the LOPS2 field 1 Introduction More than thirty years have passed since the discovery of the first exoplanets ( Wolszczan & Frail 1992 ; Mayor & Queloz 1995 ) and about twenty since the start of space-based, wide-field photometric surveys specifically designed to detect transiting exoplanets, namely CoRoT ( Auvergne et al. 2009 ) , Kepler ( Borucki et al. 2010 ) , its successor K2 ( Howell et al. 2014 ) , and the still operating TESS ( Ricker et al. 2015 ) . Despite the discovery of thousands of planets and the enormous scientific exploration of related science cases, no Earth-sized planet orbiting in the habitable zone (HZ) of a solar analogue has yet been discovered. Throughout this paper, we define as “solar analogues” main-sequence G-type stars (following the approximate T_{\mathrm{eff}} definition given by Cayrel de Strobel 1996 and Soderblom & King 1998 ) and as “Earth-like” planets Earth-sized planets in the HZ of solar-type (FGK) stars. The discovery of such “Goldilocks” planets is the most important scientific goal of the ESA mission PLATO (PLanetary Transits and Oscillation of stars; Rauer et al. 2025 ), a satellite hosting an array of 26 wide-field telescopes to be launched in January 2027 to the L2 Lagrangian point. PLATO will exploit the combination of a very large field of view ( \sim 2149 deg 2 ), an exquisite photometric precision and accuracy (down to a 10 ppm level noise floor), and the continuous monitoring of the so-called LOP (Long-duration Observing Phase; Nascimbeni et al. 2022 ) fields for at least two years each. The mission aim is to increase our discovery space for rocky planets up to the HZ of main-sequence solar-type dwarfs, including solar twins. The confirmation of these candidate planets will be possible thanks to the brightness of their host stars, which enables ground-based follow-up observations for planet candidate confirmation, including ultra-high-precision radial velocities (RV). The latter will also be crucial in measuring the mass of these planets, allowing us to constrain their physical composition and inner structure. The expected yield of newly discovered PLATO planets around bright stars ( V<11 ) is about 1200 ( Rauer et al. 2025 ) , of which 10-50 will be HZ Earth-like planets (depending on different assumptions on the actual noise properties and on their occurrence rate \eta_{\oplus} ; Heller et al. 2022 ; Matuszewski et al. 2023 ; Rauer et al. 2025 ). HZ rocky planets will require a significant effort not only in terms of detection, verification and validation, but also and above all in the subsequent confirmation phase. In addition, for the brightest targets ( V\lesssim 11 ), the light curves will be used for asteroseismology studies, with the possibilities to measure stellar masses, radii, and ages with uncertainties of 15%, 2%, and 10% respectively ( Goupil et al. 2024 ) . The ground-based follow-up will be part of the PLATO core mission, and will be coordinated by the PLATO Consortium through its Ground-based Observation Program (GOP; Mowlavi et al. 2024 ; a paper describing in detail the GOP workflow is currently in prep.). The GOP will not monitor the full yield of candidate planets found in the PLATO Input Catalog (PIC) main scientific targets (i. e., the 217\,741 stars contained in the tPIC 1 1 1 Throughout this paper, we will refer to “tPIC” as the current version of the catalog, labeled LOPS2PIC2.2_t . sub-catalog, where “t” stands for “targets”; Montalto et al. 2021 ; Montalto et al. subm.). It will focus instead on a bright and carefully chosen subset of the tPIC, called Prime Sample (PS). The scope of this paper is to describe the metrics and the selection thresholds adopted to extract the PS for the first LOP field that will be observed by PLATO for at least two years, i.e., the so-called “LOPS2” field ( Nascimbeni et al. 2025 ) . The duration of this first long pointing could be extended up to four years of the nominal mission, depending on the number of Earth-like planet candidates detected during the first two years. This paper is organized as follows. We define the requirements for the PLATO Prime Sample in Section 2 . We develop two different metrics to select the PS in Section 3 , and discuss how to apply them and how to define the corresponding selection thresholds for the current version of the PLATO Input Catalog in Section 4 . Finally, we describe the astrophysical properties of the PS in Section 5 , summarize the ongoing preparatory observations with 4MOST in Section 6 , and highlight some prospects for the future and opportunities for the general community in Section 7 . A glossary of the most common acronyms used throughout this work is compiled in Table 1 . Table 1: Glossary of acronyms used throughout this article. Acronym Description FCAM PLATO Fast camera FOV Field Of View GO PLATO Guest Observer program GOP PLATO Ground-based Observation Program HZ Habitable Zone LOP Long-duration Observation Phase LOPN LOP field North LOPN1 Current LOPN proposal ( Nascimbeni et al. 2022 ) LOPS LOP field South LOPS2 First LOPS field ( Nascimbeni et al. 2025 ) NCAM PLATO Normal camera NSR Noise-to-Signal ratio, (\textrm{S/N})^{-1} PIC PLATO Input Catalog (Montalto et al. subm.) PLATO PLAnetary Transits and Oscillations of stars ( Rauer et al. 2025 ) PMC PLATO Mission Consortium PPT PLATO Performance Team PropS PLATO Proprietary Sample PS Prime Sample PSWT ESA PLATO Science Working Team RV Radial velocity SMP ESA PLATO Science Management Plan S/N Signal-to-Noise ratio SOP Step and stare Observation Phase SciRD PLATO Scientific Requirements Document SRJD PLATO Scientific Requirements Justification Document tPIC target PIC subset, LOPS2PIC2.2_t (Montalto et al. subm.) TPT Target Programming Tool 2 The PLATO Prime Sample The Prime Sample is formally defined in the ESA PLATO Science Management Plan 2 2 2 https://www.cosmos.esa.int/documents/1635684/1636120/PLATO_Science_Management_Plan_ESA.pdf (SMP) as follows: A “prime sample” will be defined by the Plato Mission Consortium, consisting of PIC targets to be observed with high PLATO accuracy. The “prime sample” with the targets in the first LOP sky field will be defined nine months before launch and updated six months before every satellite sky field pointing. Ground-based observations will be performed for candidates within this sample during the course of the mission. In other words, the PS is strongly follow-up oriented and is supposed to include the best available targets in terms of both detection and confirmation efficiency. In the SMP, it is also specified that “the size of the Prime Sample will not be larger than 20,000 stars”. The PLATO Science Working Team (PSWT) decided to reserve 15\,000 PS targets for the first Long-duration Observation Phase (LOP) field (LOPS2), reserving the right to allocate the remaining 5\,000 additional PS targets for other possible LOP fields, even though the choice of the next LOP field(s) to be pointed to will be made after launch. As it will be explained in Section 4 , the actual number of PIC stars flagged as PS targets will be slightly larger than 15\,000 , because the PIC includes a safety margin around LOPS2 to take into account pointing errors and camera misalignment. Two facts about the PS are of particular interest for the astrophysical community at large. Firstly, the PS stars cannot be targeted by any GO proposal, regardless of the proposed science case. For this reason, the PS list will be released to the community at the time of the first public release of the PIC (PIC2.2) and available for the preparation of the GO proposals. Secondly, while in general the L0 and L1 data products (raw and calibrated imagettes, light curves and centroid curve, respectively, as defined in Section 8.2 of Rauer et al. 2025 ) for most tPIC targets will be released almost immediately after technical validation ( Rauer et al. 2025 ) , this is not true for the 15\,000 PS stars. PS data will be released after the scientific validation of the candidate planets, in any case, not later than one year after the validation of L0/L1. An important aspect of the PS is the commitment by the PMC to deliver the Level-3 products for these targets, that is, as the SMP states, the resulting “list of confirmed planetary systems, which will be fully characterised by combining information from the planetary transits, the seismology of the planet-hosting stars, and the results of ground-based observations.” For a subset of the PS consisting of a maximum of 2000 stars, the so-called the Proprietary Sample (PropS), data will be released six months after the completion of the follow-up, and, in any case, at the end of the mission in its final archive. The PropS will be the subject of a future article in this series, following the selection of PropS targets, expected after the first quarter of PLATO observations. A Venn diagram illustrating how the PropS, PS, tPIC, and PIC sets are nested within each other and how many targets they include is shown in Fig. 1 . Figure 1: Venn diagram illustrating the main subsets of the Plato Input Catalog (PIC; version 2.2) relevant for this paper: The target PIC (tPIC), the Prime Sample (PS), the Proprietary Sample (PropS). Details in Section 2 . Table 2: Definitions of the main PLATO target stellar samples. 3 3 3 Notes. The rows give: the name of the PLATO target stellar sample, the spectral type, the luminosity class, the limiting magnitude in the V band, and the noise limit in ppm in one hour. sample SpT lum. class mag. limit noise P1 F5-K7 dwarfs and subgiants V<11 <50 ppm P2 F5-K7 dwarfs and subgiants V<8.5 <50 ppm P4 M dwarfs V<16 … P5 F5-K7 dwarfs and subgiants V<13 … 3 The base metrics Unlike the approach previously adopted to select the main tPIC subsamples named P1-P2-P4-P5 defined by Nascimbeni et al. 2022 and Montalto et al. (2026 subm.) and summarized in Table 2 , we decided to base the whole PS selection process on what we call metrics , i. e., on one-dimensional merit functions of the stellar parameters designed to capture the scientific value of a given target with a single number. Such metrics have important advantages over simpler approaches based on fixed thresholds: • They can be tuned and normalized to match the expected performances of the instrument, for example, by assigning a value of 1 to stars right on the detection threshold for Earth analogs; • They avoid sharp edges in the parameter space as much as possible, in order to be more efficient in optimally selecting only the most suitable targets. Of course, at some point sharp limits due to operational constraints (such as on stellar magnitude) have to be applied to our PS, but their statistical impact is easy to be managed (see also the following point); • They can be easily reproduced in any synthetic sample, to quantify the selection effects at play and therefore to reconstruct the underlying statistical occurrence of planets (a crucial ingredient to properly estimate \eta_{\oplus} ); • They not only select but also rank the targets according to their value as a sorted list in a natural way. Consequently, replacing a target excluded for any reason or changing the sample size at any time is a trivial process. The latter advantage is obvious not only for the PS, but also for the whole sample of tPIC targets at large, since the technical requirements of PLATO will sometimes impose an automated choice between targets that are mutually exclusive. Indeed, as we mention in Section 7 , one of the metrics presented in the next Section is also currently adopted as a basis for the tPIC target priority ranking listed in the tPICScientificRanking column in PIC2.2. For a metric to be effective, it must be possible to define it as a simple analytical function of parameters that are available for all the stars in our sample, and derived as homogeneously as possible. In our case, this forces us to rely on quantities tabulated in the tPIC, such as the stellar radius R_{\star} , mass M_{\star} , effective temperature T_{\mathrm{eff}} and the noise-to-signal ratio (NSR) estimated by the Plato Performance Team (PPT) through the PINE code ( Börner et al. 2024 ) . We can identify two main stages in the process leading to the confirmation of a newly discovered planet: the photometric detection of a candidate transit from the PLATO light curves, and the subsequent ground-based follow-up necessary to exclude any false-positive scenario and measure the planet parameters. In the following Sections ( 3.1 and 3.2 , respectively), we develop two families of signal-to-noise ratio (S/N) based metrics to represent each stage. 3.1 The photometric detection metric \mathcal{M} Figure 2: Metrics \mathcal{M} and \mathcal{R} (as defined in Sections 3.1 and 3.2 ) applied to our stellar sample. Left plot: the whole sample of 217\,741 stars in tPIC2.2 plotted as a function of stellar radius R_{\star} and V magnitude and color-coded according to the value of \mathcal{M} metric (defined in Section 3.1 ). The sharp cuts at V=13 and V=16 are due to the magnitude requirements of samples P5 and P4, respectively (Table 2 ). Right plot: same, but for \mathcal{R} (defined in Section 3.2 ). Note that the color scale does not span the same numerical range. The first metric we introduce ( \mathcal{M} ) is based on the expected S/N of the photometric detection of a HZ Earth-sized planet by PLATO, but it can be trivially generalized to any other instrument by properly adjusting the noise computation. Let us split and calculate separately the signal and the noise part: \textrm{S/N}=\frac{\mathcal{S}_{\mathrm{phot}}}{\mathcal{N}_{\mathrm{phot}}}\textrm{ .} (1) The signal \mathcal{S}_{\mathrm{phot}} has to be expressed per time unit, since each PLATO field will be observed for a finite time range ( \geq 2 years for the LOP phase). Assuming purely Poissonian white noise and approximating the transit shape as a rectangular box of width T_{\mathrm{tot}} , the transit depth \delta has to be scaled by the square root of both the transit duration T_{\mathrm{tot}} and the number of transits gathered N_{\mathrm{tran}} over the observation span: \mathcal{S}_{\mathrm{phot}}=\delta\times\sqrt{T_{\mathrm{tot}}}\times\sqrt{N_{\mathrm{tran}}}\textrm{ .} (2) Neglecting the limb darkening effect, we can approximate the transit depth as \delta\approx(R_{\mathrm{p}}/R_{\star})^{2} , where R_{\mathrm{p}} and R_{\star} are the planetary and stellar radius, respectively. The number of transits N_{\mathrm{tran}} is, of course, proportional to the inverse of the orbital period P . Then, following Winn 2010 , for circular orbits, we get an expression for T_{\mathrm{tot}} as a function of P , radius ratio k=R_{\mathrm{p}}/R_{\star} , impact parameter b , orbital inclination i , semi-major axis a that can be further simplified by assuming small planets ( k\ll 1 ), central transits ( b\simeq 0 ) and neglecting very close-in planets ( a/R_{\star}\gg 1 ): T_{\rm tot}=\frac{P}{\pi}\arcsin\left[\frac{R_{\star}}{a}\frac{\sqrt{(1+k)^{2}-b^{2}}}{\sin i}\right]\approx\frac{P}{\pi}\frac{R_{\star}}{a}\textrm{ .} (3) If we substitute this expression in Eq. ( 2 ), we get \mathcal{S}_{\mathrm{phot}}=\left(\frac{R_{\mathrm{p}}}{R_{\star}}\right)^{2}\sqrt{\frac{PR_{\star}}{\pi a}}\sqrt{\frac{1}{P}}\textrm{ ,} (4) and, by simplifying and collecting all the constants, we get a function of R_{\star} and a only: \mathcal{S}_{\mathrm{phot}}\propto R_{\star}^{-3/2}a^{-1/2}\textrm{ .} (5) If we assume a constant period for the planet (and therefore a constant a ), we could derive a metric which is essentially identical to that adopted to prioritize the TESS targets ( Stassun et al. 2018 ) or, with only minor modifications, to select the PLATO LOP fields ( Nascimbeni et al. 2022 ) . However, in this context, we focus specifically on the detection of HZ planets. So, instead of fixing a in Eq. ( 5 ), we assume a semi-major axis corresponding to the irradiation level of the Earth-Sun system as defined by Kasting et al. 1993 : a_{\mathrm{HZ}}\textrm{ [au]}=1.0\times\sqrt{L_{\star}/L_{\odot}}=\left(\frac{T_{\mathrm{eff}}}{T_{\mathrm{teff,\odot}}}\right)^{2}\frac{R_{\star}}{R_{\odot}}\textrm{ ,} (6) where we assumed T_{\mathrm{teff,\odot}}=5778 K as the effective temperature T_{\mathrm{eff}} of the Sun. We are aware that this is a strong assumption, as the position and width of the HZ is expected to depend in a very complex way as a function of both stellar parameters and of the atmospheric composition and structure of the planet ( Kasting et al. 1993 ; Kopparapu et al. 2013 ) . Still, the metric we aim to design has to be kept as simple as possible in order to be effective (as explained in Section 3 ). In solar units, the signal from Eq. 5 can then be expressed as: \mathcal{S}_{\mathrm{phot}}\propto R_{\star}^{-2}\,T_{\mathrm{eff}}^{-1}\textrm{ .} (7) On the other hand, again in the white noise regime, the \mathcal{N}_{\mathrm{phot}} term can be estimated as the inverse of the square root of the flux density F_{\star} in the photometric band of interest; in terms of magnitude m , this implies \mathcal{N}_{\mathrm{phot}}\propto\frac{1}{\sqrt{F_{\star}}}=\frac{1}{\sqrt{10^{-0.4\,m_{\star}}}}\textrm{ .} (8) The metric \mathcal{M} we are searching for can finally be computed by putting together Eq. ( 7 ) and ( 8 ): \mathcal{M}\propto\frac{\mathcal{S}_{\mathrm{phot}}}{\mathcal{N}_{\mathrm{phot}}}=R_{\star}^{-2}\,T_{\mathrm{eff}}^{-1}\,10^{-0.2\,m_{\star}}\textrm{ ,} (9) which is perfectly general. The same metric can be normalized by expressing the last term as 10^{-0.2\,(m_{\star}-m_{0})} , where m_{0} is the magnitude at which the instrument of interest is able to yield a detection for an Earth analogue transit on a solar twin: \mathcal{M}=R_{\star}^{-2}\,T_{\mathrm{eff}}^{-1}\,10^{-0.2\,(m_{\star}-m_{0})}\textrm{ .} (10) By setting \mathcal{M}=1 and expressing the formula above as a function of m_{\star} , we get the limiting magnitude m_{\mathrm{lim}} corresponding to the detection threshold: m_{\lim,(\mathcal{M}=1)}=-5\log\left(T_{\mathrm{eff}}\,R_{\star}^{2}\right)+m_{0}\textrm{ .} (11) In the specific case of PLATO, \mathcal{N}_{\mathrm{phot}} is already estimated for each PIC target by taking into account a wide set of random and systematic noise sources ( Börner et al. 2024 ) as noise-to-signal ratio (NSR) expressed in ppm in one hour ( \textrm{ppm}/\!\sqrt{[h]} ) and provided in the BOLrandomSysNSRNCAM_T column. Since, on a LOP field, PLATO will be able to robustly detect an 84-ppm deep Earth-twin transit around a Sun-like star with an NSR equal to or smaller than 80 ppm in one hour ( Smith et al. 2025 ; Csizmadia et al. 2013 ; Csizmadia et al. 2023 ) , we can assume that value as a reference to normalize our metric: \mathcal{M}=\frac{\textrm{80 ppm}}{\textrm{NSR}}\left(\frac{R_{\star}}{R_{\odot}}\right)^{-2}\left(\frac{T_{\mathrm{eff}}}{T_{\mathrm{teff,\odot}}}\right)^{-1}\textrm{.} (12) In other words, the \mathcal{M}>1 condition selects stars for which PLATO will be able to detect transits of HZ Earth-like planets. The value of \mathcal{M} for every target in the tPIC catalog is plotted with a color scale in the left panel of Fig. 2 . As expected, the highest values of the metric, and therefore the highest priority, are given to small, bright and cool main-sequence stars, while faint subgiants are at the opposite end. The strong dependence on the stellar radius is essentially dominating the metric. Indeed, a linear fit to the whole tPIC data set of stellar parameters (i. e., over the typical range of late-type solar-type dwarfs) yields approximately (R_{\star}^{-2}T_{\mathrm{eff}}^{-1})\approx R_{\star}^{-2.2} . In other words, leaving the noise level equal, a K2V star gives a \sim 4.5 times higher metric (and therefore 4.5\times more priority) than an F5V. 3.2 The follow-up metric: \mathcal{R} The second metric we need to define, called \mathcal{R} , is related to the ease of follow-up from the ground, again quantified as an S/N ratio. Since the radial velocity (RV) follow-up will be the most time- and resource-consuming part of the GOP activities, \mathcal{R} must be based on the S/N achievable with the RV technique. In analogy with the approach of the previous Section, let us consider separately the two factors: \textrm{S/N}=\frac{\mathcal{S}_{\mathrm{rv}}}{\mathcal{N}_{\mathrm{rv}}}\textrm{ .} (13) The signal to be measured with the RV technique when following up a planet on a circular orbit with period P around a star of mass M_{\star} is the Keplerian RV semi-amplitude K : K=28.4\textrm{ m s}^{-1}\left(\frac{P}{\textrm{1 yr}}\right)^{-1/3}\left(\frac{M_{\mathrm{p}}\sin i}{M_{\mathrm{jup}}}\right)\left(\frac{M_{\star}}{M_{\odot}}\right)^{-2/3}\textrm{ ,} (14) hence: \mathrm{S}_{\textrm{rv}}\propto M_{\star}^{-2/3}P^{-1/3}\textrm{ ,} (15) where, again, we can replace P with the orbital period P_{\mathrm{HZ}} corresponding to the reference HZ position according to Kasting et al. 1993 . From Eq. 6 , and knowing from Kepler’s law that for M_{\mathrm{p}}\ll M_{\star} we have P\propto a^{3/2}M_{\star}^{-1/2} and therefore P_{\mathrm{HZ}}\textrm{ [yr]}=\left(\frac{T_{\mathrm{eff}}}{T_{\mathrm{teff,\odot}}}\right)^{3}\left(\frac{R_{\star}}{R_{\odot}}\right)^{3/2}\left(\frac{M_{\star}}{M_{\odot}}\right)^{-1/2}\textrm{ .} (16) The RV signal then becomes, substituting Eq. ( 16 ) into ( 15 ): \mathcal{S}_{\textrm{rv}}\propto M_{\star}^{-1/2}\,T_{\mathrm{eff}}^{-1}\,R_{\star}^{-1/2}\textrm{ .} (17) The noise term \mathcal{N}_{\mathrm{rv}} , in analogy with \mathcal{N}_{\mathrm{phot}} , can be modeled as Poissonian noise in the photometric band of interest: \mathcal{N}_{\textrm{RV}}\propto 1/\sqrt{F_{\star}}\propto 10^{0.2\cdot m}\textrm{ .} (18) The metric \mathcal{R} can be finally defined as: \mathcal{R}\propto M_{\star}^{-1/2}\,T_{\mathrm{eff}}^{-1}\,R_{\star}^{-1/2}\,10^{-0.2\,m_{\star}}\textrm{ ,} (19) which, just like Eq. ( 9 ), is perfectly general and can be normalized by defining m_{0} as the magnitude at which the instrument of interest is able to yield a detection for an Earth analogue transit on a solar twin: \mathcal{R}=\mathcal{S}_{\mathrm{rv}}/\mathcal{N}_{\mathrm{rv}}\approx M_{\star}^{-1/2}\,T_{\mathrm{eff}}^{-1}\,R_{\star}^{-1/2}\,10^{-0.2\,(m_{\star}-m_{0})}\textrm{ .} (20) Just as done for \mathcal{M} , we can set \mathcal{R}=1 and express the formula above as a function of m_{\star} , to get the limiting magnitude m_{\mathrm{lim}} corresponding to the detection threshold: m_{\lim,(\mathcal{R}=1)}=-5\log\left(M_{\star}^{1/2}T_{\mathrm{eff}}\,R_{\star}^{1/2}\right)+m_{0}\textrm{ .} (21) In the specific case of the PLATO follow-up, the vast majority of spectrographs available to GOP will be optical ones, for which the V -band magnitude is reasonably representative of the S/N achievable for high-precision RV measurements. Besides that, we can consider the scenario of a HZ Earth-mass planet around a Solar analogue at V=11 (corresponding to the P1 sample faint limit) as a reference case, and normalize our metric as follows: \mathcal{R}=158.5\cdot\left(\frac{M_{\star}}{M_{\odot}}\right)^{-1/2}\left(\frac{T_{\mathrm{eff}}}{T_{\mathrm{teff,\odot}}}\right)^{-1}\left(\frac{R_{\star}}{R_{\odot}}\right)^{-1/2}10^{-0.2\cdot V}\textrm{ ,} (22) After this normalization, and under our previous assumptions, stars with \mathcal{R}=1 should, in principle, be accessible with the same S/N by the RV follow-up, as far as HZ Earth-sized planets are concerned. We emphasize that, while \mathcal{M} is an absolute metric (where \mathcal{M}>1 implies photometric detectability by PLATO), \mathcal{R} is merely a relative metric, depending on the amount of resources available to the GOP, on the actual performance of the spectrographs and, finally, on the amount of observing time to be allocated to each target. For these reasons, the actual threshold value to be applied to \mathcal{R} is not 1, but will be instead fine-tuned in Section 4 in order to set the size of the PS to exactly 15\,000 targets, as in the PLATO science requirements. The value of \mathcal{R} for each target in the tPIC catalog is plotted as a color scale in the right panel of Fig. 2 . As for \mathcal{M} , the highest values of the metric \mathcal{R} are associated with small, bright and cool main-sequence stars, while faint subgiants are at the opposite end. However, the dependence of \mathcal{R} on the stellar radius is weaker with respect to \mathcal{M} ; a linear fit to the whole tPIC data set of stellar parameters yields approximately (M_{\star}^{-1/2}T_{\mathrm{eff}}^{-1}R_{\star}^{-1/2})\approx R_{\star}^{-1.4} . By applying the same comparison discussed for \mathcal{M} , and the noise level being equal, a K2V star gives a \sim 2.2 times higher metric (and therefore 2.2\times more priority) than an F5V. It is worth mentioning that, while the normalization of Eq. ( 22 ) has been devised with optical RV spectrographs in mind, nowadays near-infrared (NIR) spectrographs are becoming increasingly effective in delivering high-precision RVs on late-type stars. We take this into account in Section 4 , at the Prime Sample selection stage. As a closing note, we emphasize that \mathcal{R} , just like \mathcal{M} , does not take into account any source of uncertainty other than pure white photon noise, i. e., we are neglecting astrophysical effects such as stellar variability, stellar rotation, dependence of the RV precision on stellar parameters, etc. In the brightest tail of our input catalog, in particular, we will be dominated almost certainly by a systematic noise floor due to a combination of instrumental and astrophysical effects (this will have no impact on the PS selection, however, as the bright tail of the tPIC, i. e., the P2 sample will be forced in the PS anyway; see Section 4 ). All these factors will be taken into account at the vetting stage, on a star-by-star basis. This also implies that we are not explicitly biasing our input sample towards low-activity and therefore older stars; there is also no explicit bias for binary stars or Galactic stellar populations, as a consequence of our general approach of keeping the sample as unbiased as possible in order to carry out appropriate statistical studies on the PLATO planetary yield. Indirect selection effects (such as those driven by the cuts in spectral type or R_{\star} ) can still be at play, but the dedicated modeling of these effects is beyond the scope of this paper. Figure 3: Metrics \mathcal{M} (left panel) and \mathcal{R} (right panel), as defined in Sections 3.1 , 3.2 and calculated for the Prime Sample stars (Section 2 ). The sharp selection cuts at V=14 and R_{\star}=1.5 R_{\odot} are explicitly set by the inclusion criteria (Eq. 23 ), while the cut at V=8.5 comes from the definition of the P2 subsample (Table 2 ). 4 The selection criteria At this point, we are ready to combine the metrics we defined in the previous Section to extract the Prime Sample from the tPIC. The PIC2.2 contains a total of 217\,741 tPIC entries (Montalto et al., subm.), of which only 182\,581 fall within the LOPS2 nominal footprint. The latter subset can be extracted by selecting stars having \texttt{BOLnCameraObsNCAM\_T}>0 and we will refer to it as the “nominal” subset from here on. Stars flagged with \texttt{BOLnCameraObsNCAM\_T}=0 belong to a safety margin of a few degrees around the nominal field to take into account pointing and repointing errors, rotation offsets and mutual telescope misalignments. The \mathcal{M} and \mathcal{R} metrics are essential ingredients of our selection recipe for the Prime Sample, but we still need a few amendments to force the inclusion or exclusion of specific classes of targets. The PSWT agreed to: • limit the sample at R_{\star}<1.5\,R_{\odot} to exclude large and evolved stars, for which the follow-up could be hindered by fast rotation and/or pulsations; • limit the sample at V<14 to exclude faint stars, for which the follow-up could be prohibitively time expensive, regardless of the theoretically predicted NSR. Two classes of targets are then forced into the PS as an exception to the two selection cuts above: • the whole P2 sample (868 stars, 712 of them falling in the nominal field), regardless of the NSR or stellar parameters of the targets. This implies forcing all the tPIC stars with V<8.5 , recognized as high-priority targets due to their brightness 4 4 4 for instance, all the targets within the LOPS2 footprint and listed in Table D.2 of Lund et al. 2025 as high-priority targets for the detection of solar-like oscillations are included in the PS, and all of them except four would have been rejected by the R_{\star}<1.5\,R_{\odot} requirement. . The sole exception is HD 42581 = GJ 229, the only P4 star in the tPIC brighter than V=8.5 . This target is indeed included in the PS, but due to its high metric values (it does not fall within the nominal LOPS2, however); • all the P4 stars (i.e., M dwarfs; Prisinzano et al. 2026 ) brighter than H=9 in the 2MASS system, that is, bright enough to be conveniently observed by NIR spectrographs, recognizing the growing effectiveness of new generation instruments such as NIRPS ( Bouchy et al. 2025 ; Vaulato et al. 2025 ) . This metric term selects 275 targets, of which only seven would not have been selected by the previous criteria. Since the selection threshold on \mathcal{M} is set to \mathcal{M}>1 by construction (Section 3.1 ), and since \mathcal{R} is a relative metric as explained in Section 3.2 , the threshold on \mathcal{R} is acting here as a free parameter and can be fine-tuned in order to get a total number of 15\,000 PS stars in the nominal field (as required; see Section 2 ). With a compact notation, our selection criteria can be summarized with the following logical expression: \displaystyle(\mathcal{M}>1\texttt{ AND }\mathcal{R}>0.73861\texttt{ AND }R_{\star}/R_{\odot}<1.5\texttt{ AND }V<14) \displaystyle\texttt{ OR }(\mathrm{P2})\texttt{ OR }(\mathrm{P4}\texttt{ AND }H<9)\textrm{ ,} (23) where the threshold value of \mathcal{R}=0.73861 corresponds to a Solar twin (1 M_{\odot} , 1 R_{\odot} , 5778 K) at magnitude V\simeq 11.66 . “P2” and “P4” are boolean flags marking the membership of a target to the P2 or P4 sample, AND / OR are the usual boolean operators. The \mathcal{M} and \mathcal{R} metrics are calculated as in Eq. ( 12 ) and ( 22 ), respectively. For those 547 stars for which one or more ingredients of the metric are missing ( R_{\star} , M_{\star} and/or T_{\mathrm{eff}} ) the value of \mathcal{M} and \mathcal{R} is assigned as the average value of \mathcal{M} and/or \mathcal{R} of their subset of belonging (P1, P2, P4 or P5). We anticipate that only three of them make it in the final PS selection (i. e., the 0.17% of the total PS size). In Eq. ( 23 ), we approximate the 2MASS H magnitude via the empirical relation: H=0.74439+K_{s}-1.4318\cdot 10^{-4}\,T_{\mathrm{eff}}\textrm{ ,} (24) calibrated on the tPIC vs. 2MASS cross-match; the coefficients were obtained through an ordinary least-squares fit. The output of the selection process is visualized in the radius-magnitude plane in Fig. 3 , where the PS stars are color-coded according to their \mathcal{M} and \mathcal{R} values. It is worth noting that the total number of PS stars in the tPIC selected by Eq. ( 23 ) is 17\,101 , but only 15\,000 of them fall within the nominal LOPS2 footprint, for the reasons explained above. This is illustrated in the sky chart plotted in Fig. 5 . Figure 4: Statistical properties of the Prime Sample (Section 2 ). Left plot: number of PS stars in each cell of the V , R_{\star} plane. The number is color-coded on a logarithmic scale and labeled on each cell. Right plot: Inclusion rate, i. e., the fraction of tPIC targets selected in the Prime Sample, for each cell of the V , R_{\star} plane. Bright, late-type dwarfs are included with an inclusion rate of 100% or very close to it, corresponding to the cyan shade of the color scale. Only cells containing at least five tPIC targets are plotted. Figure 5: Sky map of the LOPS2 field in Galactic coordinates. The 15\,000 points plotted in blue shades are PS targets falling within the nominal footprint of LOPS2 ( Nascimbeni et al. 2025 ) and color-coded according to the nominal number of NCAMs. The 2\,101 red points are PS stars selected in a safety margin around LOPS2, to take into account alignment and pointing errors (as explained in Sec. 4 ). A quick look at the two-dimensional distribution in the same parameter space (Fig. 4 , left panel) reveals that the vast majority of the PS stars are G dwarfs in the 11