Directed homological and cohomological operations Eric Goubault Abstract In this short note, we present a persistence module approach to directed cohomology, dual to the directed homology introduced in [ 9 ] . We lay out the first properties of directed cohomology and in particular of cohomological operations, partially linked to some homological operations. We treat here both the case of a specific class of precubical sets and of general directed spaces. 1 Introduction Directed homology has been long studied [ 10 , 9 , 12 , 5 , 14 , 3 ] but very few has been developed concerning homological operations and cohomological operations. In a classical setup, cap and cup products play an important role, giving finer control on these topological invariants. We build on the directed homology introduced in [ 9 ] , to derive two main operations. One is induced by the concatenation of directed paths and higher paths, and leads both to a homological and cohomological operation. The other one is induced by the classical cup product on the “local cohomology ring” of the traces spaces, and lives only in directed cohomology. In this short note, we pave the way towards the full study of these operations. More has to be studied, in particular the interaction between the two directed cohomological operations and on practical calculations. Contents We first recap in Section 2 and in Section 3 the basic concepts and definitions we will need concerning directed spaces and their combinatorial counterparts, a certain class of precubical sets. We then define coboundary maps in Section 4 , by dualizing the construction of [ 9 ] , which allows us to defined directed cohomology bimodules, over the path algebra in Section 5 . On a particular class of precubical sets, we are able to construct in Section 7 two cohomological operations: \curvearrowright and \smile , \curvearrowright being the dual of a homology operation \circledast generated by the concatenation operation of cube chains. We describe more briefly the corresponding construction in the more general situation of directed spaces, see Section 8 . Finally we give some calculations of these operations on directed cohomological bimodules in Section 9 , building from the results of [ 2 ] . 2 Background on directed spaces We first recap the notion of d -space [ 6 , 13 ] : Definition 2.1 . A directed space is a pair \vec{X}=(X,dX) where X is a topological space and dX is a set of continuous paths in X , called the directed paths of the space, such that; (i) Every constant path is a directed path (ii) Every increasing reparametrization of a directed path is a directed path i.e. for every directed path \gamma\in dX and for any function \varphi:[0,1]\to[0,1] which is continuous and increasing, \gamma\circ\varphi\in dX (iii) For any directed paths \gamma and \delta so that \gamma(1)=\delta(0) , the concatenation \gamma\cdot\delta of \gamma and \delta is a directed path One simple example of a directed space is the closed interval [0,1] with increasing function [0,1]\to[0,1] as directed paths. This space is the directed unit interval. Morphisms of directed spaces are defined as follows. Definition 2.2 . Let \vec{X}=(X,dX) and \vec{Y}=(Y,dY) be two directed spaces. A continuous function f:X\to Y is called a directed map, or dimap, when: \forall\gamma\in dX,\quad f\circ\gamma\in dY A dimap from the directed unit interval to a directed space \vec{X} is called a dipath. The dipaths of \vec{X} are exactly its directed paths. Directed spaces together with dimaps (and composition of functions) form the category of directed spaces. In a given directed space, the set of paths from one point to another is endowed with the compact-open topology. Definition 2.3 . Let \vec{X}=(X,dX) be a directed space and x,y\in X . The set of all directed paths \gamma\in dX so that \gamma(0)=x\textit{ and }\gamma(1)=y together with the compact-open topology is called the path space from x to y and is denoted by {P(\vec{X})_{x}^{y}} We consider the relation \sim “being the same up to bijective increasing reparametrization” defined by \gamma\sim\delta iff there exists a continuous increasing bijective function f:[0,1]\to[0,1] such that \delta=\gamma\circ f is indeed an equivalence relation. Definition 2.4 . Given a directed space \vec{X}=(X,dX) , a trace from x\in X to y\in X is an equivalence class of paths from x to y for the equivalence relation here denoted by \sim . If \gamma is a dipath, we will denote by {[\gamma]} the corresponding trace. This allows us to define concatenation * on traces, and this gives rise to a category of traces. We denote by Tr(\vec{X}) the trace space of \vec{X} , and Tr(\vec{X})_{\alpha}^{\beta} the subspace of Tr(\vec{X}) consisting of traces from points \alpha to \beta in X . 3 Background on precubical sets and cube chains Our results will apply to a particular class of precubical sets, that has been introduced in [ 17 ] : Definition 3.1 . Let X be a finite precubical set. We say that X is proper if the map: \bigcup\limits_{n\geq 0}X_{n}:\ c\rightarrow\{d^{0}(c),d^{1}(c)\}\in 2^{X_{0}} is an injection, i.e., the cubes of X can be distinguished by its start and end vertices. The non-looping length covering of X is the precubical set \tilde{X} with \tilde{X}_{n}=X_{n}\times\mbox{$\mathbb{Z}$} and d^{\epsilon}_{i}(c,k)=(d^{\epsilon}_{i}(c),k+\epsilon) . We write {Cub} for the full sub-category of Precub , of finite precubical sets with proper non-looping length covering. The following definition is essential in the calculations on trace spaces done by Krzysztof Ziemianski [ 17 ] . We twist a little the original definition so that 1-cube chains can be empty, and can consist in that case of constant paths on vertices, this convention will prove easier for the rest of the paper. Definition 3.2 . Let X be a pre-cubical set and let v , w\in X_{0} be two of its vertices. A cube chain in X from v to w is a sequence of cubes indexed by v and w , c=(c_{1},\ldots,c_{l})_{v,w} , where c_{k}\in X_{n_{k}} and n_{k}>0 , l\geq 0 , such that either l=0 and v=w or: • d^{0}(c_{1})=v , • d^{1}(c_{l})=w , • d^{1}(c_{i})=d^{0}(c_{i+1}) for i=1,\ldots,l-1 . We will often leave out the index v,w to cube chains when the context makes it clear what they are. The sequence (n_{1},\ldots,n_{l}) will be called the type of a cube chain c , dim(c)=n_{1}+\ldots+n_{l}-l the dimension of c , and n_{1}+\ldots+n_{l} , the length of c . By convention, we set dim(()_{v,v})=0 : the dimension of constant paths on a vertex is zero. These cube chains in X from v to w will be denoted by Ch(X)^{w}_{v} , and the set of cube chains of dimension equal to m (resp. less than m , less or equal to m ) by Ch^{=m}(X)^{w}_{v} (resp. Ch^{