Background dynamics and observational constraints of flat and non-flat Λ ⁡ ( t ) \Lambda(t) CDM models from H ⁡ ( z ) H(z) and DESI DR2 BAO measurements Olga Avsajanishvili Abstract In this work, we present comprehensive observational constraints on the time-varying vacuum Λ ⁡ ( t ) \Lambda(t) CDM cosmology using the latest baryon acoustic oscillation (BAO) data from Dark Energy Spectroscopic Instrument (DESI) Data Release 2 measurements in combination with cosmic chronometer H ⁡ ( z ) H(z) data. We explicitly quantify the impact of vacuum dynamics on the expansion history, the total effective equation of state parameter of the unified cosmic fluid, the effective dark energy equation of state parameter, and the deceleration parameter in the spatially flat Λ ⁡ ( t ) \Lambda(t) CDM model. We perform a full Markov Chain Monte Carlo (MCMC) analysis and statistical model comparison, providing a consistent assessment of the Λ ⁡ ( t ) \Lambda(t) CDM model relative to the standard Λ \Lambda CDM framework. Our results demonstrate that H ⁡ ( z ) H(z) and BAO observations strongly constrain deviations from the Λ \Lambda CDM model, driving the vacuum dynamics parameter toward α ≃ 0 \alpha\simeq 0 , while significantly reducing parameter degeneracies and alleviating the Hubble tension. I Introduction The standard spatially flat cosmological Lambda Cold Dark Matter ( \Lambda CDM) model ( Peebles 1984 ; Peebles and Ratra 2003 ; Lopez-Corredoira 2023 ) has demonstrated good consistency with a wide range of observational probes accumulated over the last several decades ( Aghanim et al. 2020a ; Aghanim et al. 2020b ; Aiola et al. 2020 ; Alam et al. 2021 ) . Nevertheless, despite its status as the current concordance model, the \Lambda CDM model exhibits a number of statistically significant tensions and anomalies ( Perivolaropoulos and Skara 2022 ; Di Valentino 2022 ; Abdalla et al. 2022 ; Peebles 2022 ; Vagnozzi 2023 ) . Among the various discrepancies reported in the literature, one of the most prominent is the tension in the Hubble constant H_{0} , manifested as a statistically significant disagreement between the value inferred from Planck Cosmic Microwave Background (CMB) observations Aghanim et al. 2020b and that obtained from local distance-ladder measurements by Supernova H_{0} for the Equation of State (SH0ES) collaboration Riess et al. 2022 . In this context, another long-standing open issue in modern cosmology is the so-called coincidence problem, namely, the question of why the energy densities of dark energy (DE) and dark matter (DM) are of the same order of magnitude precisely at the present cosmic epoch Steinhardt et al. 1999 ; Garriga and Vilenkin 2001 ; Dalal et al. 2001 ; Ishak 2007 ; Starkman and Trotta 2006 ; Maor et al. 2008 ; Martin 2012 ; Zheng et al. 2021 . The interacting DE (IDE) models Wetterich 1995 ; Amendola 2000a ; Amendola 2000b ; Zimdahl and Pavon 2001 ; Liu et al. 2024 address this problem by allowing energy exchange between DE and DM, effectively allowing dynamical interplay between these two components Wetterich 1995 ; Amendola 2000a ; Amendola 2000b ; Zimdahl and Pavon 2001 ; Liu et al. 2024 . Such interactions can naturally modify the late-time expansion history of the universe, providing a viable mechanism to alleviate the coincidence problem and, through the resulting changes in the background dynamics, offering a phenomenological avenue to ease the observed H_{0} tension Yang et al. 2018 ; Di Valentino et al. 2020a ; Di Valentino et al. 2020b ; Nunes and Di Valentino 2021 ; Di Valentino et al. 2021 ; Bernui et al. 2023 ; Hoerning et al. 2025 ; Teixeira et al. 2023 ; Zhai et al. 2023 ; Pan and Yang 2023 ; Blanchard 2025 . The time-varying Lambda Cold Dark Matter ( \Lambda(t) CDM) model Benetti et al. 2019 ; Benetti et al. 2021 ; Di Valentino et al. 2021 ; Borges et al. 2023 ; Koussour et al. 2024 ; Benetti et al. 2025 ; Yang et al. 2025 ; di Donato and Pilo 2025 ; Guillen et al. 2025 belongs to a wide class of IDE scenarios. This model represents a phenomenological extension of the standard \Lambda CDM cosmology in which the vacuum energy density is allowed to evolve with cosmic time and interact with the matter sector. The interaction between matter and vacuum energy is parametrized by a single dimensionless vacuum dynamics parameter \alpha 1 1 1 The \Lambda(t) CDM model is closely related to the running vacuum model (RVM) Shapiro et al. 2003 ; Sola et al. 2017 ; Sola Peracaula et al. 2019 ; Sola Peracaula 2022 ; Moreno-Pulido and Sola Peracaula 2022 ; Moreno-Pulido and Peracaula 2022 ; Sola Peracaula et al. 2023 ; Moreno-Pulido et al. 2023 ; Solà Peracaula et al. 2026 , as both scenarios belong to the class of cosmologies with dynamical vacuum energy interacting with matter. While RVM is typically formulated through an explicit dependence of the vacuum energy density on the Hubble rate, \rho_{\Lambda}=\rho_{\Lambda}(H) , motivated by quantum field theory in curved spacetime, the \Lambda(t) CDM framework implements vacuum dynamics phenomenologically via a modified matter dilution law. At the background level and for small values of the model parameter \alpha , the two models exhibit nearly equivalent expansion histories, leading to similar late-time cosmological signatures. , which quantifies departures from the standard \Lambda CDM model and ensures a continuous \Lambda CDM limit for \alpha=0 , fully recovered only asymptotically in the future. At the background level, this model can be interpreted as equivalent to a Generalized Chaplygin Gas (GCG), providing a phenomenological unified description of DM and DE as a single fluid. The concept of unifying DM and DE was first introduced by Chaplygin Chaplygin 1904 , and the original Chaplygin model, along with its various generalizations, has been extensively studied both theoretically and observationally Bilic et al. 2002 ; Caldwell et al. 2006 ; Benaoum 2022 ; Avelino et al. 2003 ; Debnath et al. 2004 ; Guo and Zhang 2007 ; Banerjee and Ghosh 2006 ; del Campo and Herrera 2008 ; Lu et al. 2009 ; Lu et al. 2008 ; Lu et al. 2009 ; Lu et al. 2011 ; Xu and Lu 2010 ; Liang et al. 2011 ; Bouhmadi-Lopez et al. 2011 ; Xu et al. 2012a ; vom Marttens et al. 2017 . The GCG arises from a barotropic fluid with the equation of state (EoS) p=-A/\rho^{\alpha} , where p and \rho are the pressure and the energy density of the barotropic fluid, respectively; A>0 is a constant and \alpha is the model parameter (typically \alpha>-1 to avoid singularities) 2 2 2 For the original Chaplygin gas, \alpha=1 and the EoS has the form p=-A/\rho . . It was originally proposed to account for the observed cosmic acceleration without invoking separate DM and DE components Kamenshchik et al. 2001 ; Bento et al. 2002 ; Gorini et al. 2003 ; Amendola et al. 2003 ; Multamaki et al. 2004 ; Gorini et al. 2005 ; Banerjee et al. 2007 ; Lu et al. 2009 ; Xu et al. 2012b ; Lu et al. 2015 ; Herrera et al. 2016 . In this framework, the unified fluid behaves like DM during the early stages of cosmic evolution and asymptotically approaches a cosmological constant at late times, with vacuum energy interacting with matter. In this work, we reconstruct the total effective EoS parameter of the unified cosmic fluid, the effective DE EoS and deceleration parameters within the framework of the spatially flat \Lambda(t) CDM model. We perform a detailed analysis of the dynamical behavior of the model by examining the expansion history of the universe, along with the temporal evolution of the total effective EoS parameter of the unified cosmic fluid, the effective DE EoS parameter, and the deceleration parameter. Direct measurements of the Hubble expansion rate from cosmic chronometers provide a relatively model-independent probe of the late-time expansion history. When combined with baryon acoustic oscillation (BAO) measurements, these data enable a robust assessment of vacuum dynamics and spatial curvature, significantly reducing the parameter degeneracies present when H(z) data are used alone. We apply Markov Chain Monte Carlo (MCMC) analysis to constrain the parameters of spatially flat and non-flat \Lambda(t) CDM models and compare them with the standard spatially flat and non-flat \Lambda CDM scenarios, using H(z) measurements ( Simon et al. 2005 ; Stern et al. 2010 ; Zhang et al. 2014 ; Ratsimbazafy et al. 2017 ; Borghi et al. 2022 ; Cao and Ratra 2023 ) and combined H(z) +BAO data from the Dark Energy Spectroscopic Instrument (DESI) Data Release 2 (DR2) Abdul Karim et al. 2025 . To our knowledge, this represents the first observational analysis of the spatially flat and non-flat \Lambda(t) CDM model using DESI DR2 BAO data. For model comparison, we employ several Bayesian statistical criteria and goodness-of-fit estimators, including \Delta\chi^{2}_{\rm min} , the Akaike Information Criterion ( AIC ), the corrected Akaike Information Criterion ( AICc ), the Bayesian Information Criterion ( BIC ) and the Akaike weights w_{i} . Rather than claiming full resolution of the Hubble tension, our goal is to assess whether vacuum dynamics within the \Lambda(t) CDM framework can alleviate the discrepancy between early and late-time determinations of H_{0} . This paper is organized as follows: Section II presents a description of the \Lambda(t) CDM model; Section III discusses the derivation of the reconstructive formulas for the total effective EoS parameter of the unified cosmic fluid, the effective DE EoS parameter, and the deceleration parameter in the spatially flat \Lambda(t) CDM model; Section IV considers the features of observational constraints on the parameters of the spatially flat and non-flat \Lambda CDM and \Lambda(t) CDM models; Section V presents the results and analysis of the calculations; and Section VI summarizes the conclusions. We use the natural system of units here c=k_{B}=1 . II Background Dynamics of the \Lambda(t) CDM Model We assumed that the flat, homogeneous and isotropic universe is described by the Friedmann–Lemaître–Robertson–Walker spacetime metric ds^{2}=dt^{2}-a^{2}(t)d{\bf x}^{2} , where t is a cosmic time; {\bf x} are the comoving coordinates; a(t) is a scale factor, normalized to be unity at the present epoch a_{0}\equiv a(t_{0})=1 , so that a=1/(1+z) , here z is the redshift. Within the FLRW framework, which includes a component of pressureless matter with energy density \rho_{m} coupled to a dynamical vacuum-like energy density \Lambda(t) depending on cosmic time, the first Friedmann equation (in units where 8\pi G/3=1 , with G being Newton’s gravitational constant) and the corresponding conservation equations read, respectively \displaystyle 3H^{2}=\rho_{m}+\Lambda(t), (1) \displaystyle\dot{\rho_{m}}+3H\rho_{m}=\Gamma\rho_{m}=-\dot{\Lambda}(t), (2) where the over-dot represents the derivative with respect to cosmic time, H is a Hubble parameter. The dependence of the dynamical cosmological constant on the Hubble parameter is represented as Benetti et al. 2019 ; Benetti et al. 2021 \Lambda(t)=\varrho H^{-2\alpha},~{\rm with}~\varrho=3(1-\Omega_{m0})H_{0}^{2(1+\alpha)}, (3) here H_{0} is a value of the Hubble parameter at the present epoch, H_{0}=100h~{\rm km~s^{-1}Mpc^{-1}} , h is the dimensionless Hubble parameter; \Omega_{m0} is the matter density parameter at the present epoch. The constant \alpha is the vacuum dynamics parameter (also acting as an interaction parameter), whose absolute value quantifies the strength of energy exchange between DE and matter over cosmic time. It parameterizes deviations from the \Lambda CDM model and characterizes the dynamical nature of the vacuum component. As mentioned above, this parameter is restricted to \alpha>-1 . The function \Gamma specifies the effective rate of matter creation for \Gamma>0 and the annihilation rate for \Gamma<0 , and in this class of models takes the form of Benetti et al. 2019 ; Benetti et al. 2021 \Gamma=-\alpha\varrho H^{-(2\alpha+1)}. (4) In the \Lambda(t) CDM model, the general form of the normalized Hubble parameter, in which the DE and matter components are unified and parameterized by a power-law dependence on the vacuum dynamics parameter \alpha , is given by Benetti et al. 2019 ; Benetti et al. 2021 E(a)=\bigg[\Big((1-\Omega_{m0})+\Omega_{m0}a^{-3(1+\alpha)}\Big)^{\frac{1}{(1+\alpha)}}+\\ +\Omega_{r0}a^{-4}+\Omega_{k0}a^{-2}\bigg]^{1/2}, (5) where E=H(a)/H_{0} is the normalized Hubble parameter; \Omega_{r0} and \Omega_{k0} denote the radiation and spatial curvature density parameters at the present epoch, respectively. In this paper, we consider the values h=0.6891 and \Omega_{m0}=0.3038 of Morawetz et al. 2025 . Positive values of the vacuum dynamics parameter \alpha , corresponding to a quintessence-like regime Caldwell and Linder 2005 ; Peebles and Ratra 2003 , lead to a decreasing vacuum energy density that transfers energy to the matter sector, resulting in effective matter creation and cosmic expansion faster than in the standard \Lambda CDM model. In contrast, negative values of \alpha , corresponding to a phantom-like regime Caldwell 2002 ; Elizalde et al. 2004 , produce an increasing vacuum energy density at the expense of matter, causing effective matter annihilation and slower cosmic expansion compared to the \Lambda CDM model. The limit \alpha=0 recovers the standard \Lambda CDM scenario, in which the matter and vacuum components are conserved separately. By analyzing Eq. ( 5 ), it follows that in the early universe ( a\to 0 ), the term proportional to a^{-3(1+\alpha)} dominates the energy density, leading to \rho(a)\propto a^{-3} . In this regime, the unified matter–DE component behaves as pressureless matter, effectively mimicking cold DM and allowing for the formation of standard cosmic structures. At intermediate epochs, the expansion history encoded in E(a) is governed by the competition between the matter-like term \Omega_{m0}a^{-3(1+\alpha)} , dominant at early times, and the constant contribution (1-\Omega_{m0})\equiv\Omega_{DE0} , which gradually becomes important and drives the departure from matter domination, signaling the onset of late-time accelerated expansion. In the asymptotic future ( a\gg 1 ), the contribution of matter becomes negligible and Eq. ( 5 ) approaches a constant value, implying vacuum domination and an asymptotically de Sitter–like expansion. A three-dimensional evolution of the Hubble parameter H(a) in the spatially flat \Lambda(t) CDM model, as a function of \alpha and the scale factor a , is illustrated in Fig. 1 , assuming \Omega_{m0}=0.3038 and H_{0}=68.91~{\rm km~s^{-1}Mpc^{-1}} Morawetz et al. 2025 . Figure 1: Three-dimensional representation of the Hubble parameter H(a) in the spatially flat \Lambda(t) CDM model, shown in the \alpha-a phase space, for \Omega_{m0}=0.3038 and H_{0}=68.91~{\rm km~s^{-1}Mpc^{-1}} Morawetz et al. 2025 . III Reconstruction of the effective EoS parameter of the unified cosmic fluid, the DE EoS parameter, and the deceleration parameter We derive the explicit form of the total effective EoS parameter of the unified cosmic fluid in the spatially flat \Lambda(t) CDM model, w_{tot}=p_{tot}/\rho_{tot} (see Appendix A for details), which characterizes the combined behavior of matter and DE in the \Lambda(t) CDM framework. The total effective EoS parameter of the unified cosmic fluid is given by (see Eqs. ( 18 )) w_{tot}(a)=-1+\frac{\Omega_{m0}a^{-3(1+\alpha)}}{1-\Omega_{m0}+\Omega_{m0}a^{-3(1+\alpha)}}. The asymptotic behavior of w_{tot} can be summarized as follows: in the early universe, w_{tot}(a\to 0)\to 0 ; at the present epoch, w_{tot}(a=1)=-(1-\Omega_{m0})=-\Omega_{DE0} ; and in the asymptotic future, w_{tot}(a\gg 1)\to-1 . This sequence reflects the standard cosmological evolution from a matter dominated era ( w_{tot}\simeq 0 ) to a vacuum dominated phase, ultimately approaching an asymptotic de Sitter state ( w_{tot}\to-1 ). Consequently, despite the presence of vacuum dynamics, the \Lambda(t) CDM model naturally reproduces the conventional dust \rightarrow vacuum domination \rightarrow de Sitter evolution, preserving the essential features of early time structure formation while slightly modifying the timing of late time cosmic acceleration. We also derive the deceleration parameter and the effective DE EoS parameter, w_{DE} , treating DE as a distinct component in the spatially flat \Lambda(t) CDM model (see Appendix B for details). This distinction is crucial, since w_{tot} and w_{DE} coincide only in the asymptotic future limit of complete DE domination, whereas at earlier times, including the present epoch, they generally differ due to the non-negligible contribution of matter. In the spatially flat \Lambda(t) CDM model, the deceleration parameter and the effective DE EoS parameter take, respectively, the following forms (see Eqs. ( 22 ) and ( 23 )) q(a)=-1+\frac{3}{2}\frac{\Omega_{m0}a^{-3(1+\alpha)}}{X}, w_{DE}(a)=-\frac{1-\Omega_{m0}a^{-3(1+\alpha)}X^{-1}}{1-\Omega_{m0}a^{-3}X^{-\frac{1}{1+\alpha}}},~{\rm with}~\alpha\neq-1, where X=1-\Omega_{m0}+\Omega_{m0}a^{-3(1+\alpha)} . For \alpha=0 , the expression for the DE EoS parameter in Eq. ( 23 ) reduces to that of the standard \Lambda CDM model, with w_{DE}(a)=-1 . At the present epoch, i.e. , for a=1 , Eqs. ( 22 ) and ( 23 ) yield q(a=1)=\tfrac{3}{2}\Omega_{m0}-1 and w_{DE}(a=1)=-1 , respectively. By contrast, the effective EoS parameter of the unified cosmic fluid is today, according to Eq. ( 18 ), w_{tot}(a=1)=-\Omega_{\rm DE0} due to the residual matter contribution. Therefore, the \Lambda(t) CDM model approaches the standard \Lambda CDM scenario only asymptotically in the future, rather than exactly at the present epoch. IV Observational constraints of the \Lambda(t) CDM and \Lambda CDM models We perform observational constraints on the parameter sets {\bf p}=\{H_{0},\alpha,\Omega_{m0}\} and {\bf p}=\{H_{0},\alpha,\Omega_{m0},\Omega_{k0}\} for the flat and non-flat \Lambda(t) CDM models, respectively, and {\bf p}=\{H_{0},\Omega_{m0}\} and {\bf p}=\{H_{0},\Omega_{m0},\Omega_{k0}\} for the flat and non-flat \Lambda CDM models, respectively. For this purpose, we applied 32 H(z) measurements in the redshift range of z\in[0.07,1.965] ( Simon et al. 2005 ; Stern et al. 2010 ; Zhang et al. 2014 ; Ratsimbazafy et al. 2017 ; Borghi et al. 2022 ; Cao and Ratra 2023 ) , of which 15 measurements are correlated ( Moresco et al. 2012 ; Moresco 2015 ; Moresco et al. 2016 ) . The covariance matrix for the correlated measurements we found at https: //gitlab.com/mmoresco/CCcovariance/. In addition, we used 13 Baryon Acoustic Oscillation (BAO) measurements ( Abdul Karim et al. 2025 ) from DESI DR2 in the redshift range z\in[0.295,2.330] . The priors for the parameters of the \Lambda CDM and \Lambda(t) CDM models adopted in our analysis are presented in Table 1 . Table 1: Priors for the parameters. \rm Parameter \rm Priors H_{0} [\rm None,~None] \alpha [-0.99,1] \Omega_{m0} [0.2,0.6] \Omega_{k0} [-0.6,0.6] We obtain the posterior distributions of the parameters of the \Lambda CDM and \Lambda(t) CDM models using the MCMC method with the Cobaya software package ( Torrado and Lewis 2021 ) . To create plots and analyze the MCMC results, we applied the PYTHON GETDIST package ( Lewis 2025 ) . For model selection based on the H(z) data alone, we employ the corrected AICc, since the number of data points is relatively small compared to the number of free parameters. The AICc is defined as Hurvich and Tsai Sai 1989 AICc=\chi^{2}_{\min}+2k+\frac{2k(k+1)}{n-k-1}, (6) where \chi^{2}_{\min} is the minimum chi-squared value, k denotes the number of free parameters, and n is the total number of data points. For the H(z) data set ( n=32 , corresponding to n/k=6.4 – 16<40 ), the use of AICc is justified, as it corrects for the known tendency of the standard AIC to favor overly complex models in small-sample regimes Hurvich and Tsai Sai 1989 . For the combined H(z) +BAO data set, the AIC is sufficient, as the correction becomes negligible. The AIC can be evaluated as Akaike 1974 AICc=\chi^{2}_{\min}+2k. (7) As an additional consistency check, we compute BIC , defined as Schwarz 1978 BIC=\chi^{2}_{\min}+k\ln n. (8) The comparison of the models is performed using the differences \Delta AICc (or \Delta AIC ) and \Delta BIC , defined relative to the model that minimizes the corresponding information criterion. Furthermore, we evaluated the Akaike weights w_{i} Burnham and Anderson 2002 w_{i}=\frac{\exp(-\Delta_{i}/2)}{\sum_{j=1}^{R}\exp(-\Delta_{j}/2)}, (9) where \Delta_{i}=AICc_{i}-\min(AICc) (or \Delta_{i}=AIC_{i}-\min(AIC) ), and R denotes the total number of models under consideration. These weights can be interpreted as the relative probability that a given model provides the best description of the data, in the sense of minimizing information loss, assuming that one of the candidate models is correct. In addition, the quantities \Delta\chi^{2}_{\min}=\chi^{2}_{\min,i}-\min(\chi^{2}_{\min}) and the reduced chi-squared, \chi^{2}_{\min}/{\rm dof} , are used to assess the goodness of fit of each model, where {\rm dof}=n-k is the number of degrees of freedom. All values of \Delta\chi^{2}_{\min} , \Delta AICc , \Delta AIC , and \Delta BIC are calculated with respect to the best-performing model within each data set separately, and Akaike weights are used to quantify the relative statistical support of competing models. V Results and discussions V.1 Properties of the spatially flat \Lambda(t) CDM model V.1.1 Expansion of the universe We numerically solve the first Friedmann equation Eq. ( 5 ), without the spatial curvature term, to study the expansion of the universe for the spatially flat \Lambda(t) CDM model. The evolution of the normalized Hubble expansion rate as a function of the scale factor for different values of the vacuum dynamics parameter \alpha is shown in Fig. 2 . The normalized Hubble expansion rate decreases more rapidly for all values of the scale factor with an increase in the value of the vacuum dynamics parameter \alpha . For \alpha<0 , the normalized Hubble expansion rate in the spatially flat \Lambda(t) CDM model decreases more slowly than in the \Lambda CDM model. This evolution is similar to the evolution of the normalized Hubble expansion rate in phantom scalar field DE models. However, for \alpha>0 , the normalized Hubble expansion rate in the spatially flat \Lambda(t) CDM model decreases faster than in the \Lambda CDM model, which corresponds to the behavior of the normalized Hubble expansion rate in quintessence scalar field DE models. Figure 2: Normalized Hubble expansion rate in the spatially flat \Lambda(t) CDM model as a function of the scale factor for different values of the vacuum dynamics parameter \alpha . V.1.2 Analysis of the reconstructed effective and DE EoS parameters and the deceleration parameter The numerical solution of Eq. ( 23 ) for the effective reconstructed DE EoS parameter in the spatially flat \Lambda(t) CDM model for the positive values of the vacuum dynamics parameter \alpha , which corresponds to quintessence-like DE, in the scale factor range a\in[0.1,1] is presented in Fig. 3 . The evolution of the DE EoS parameter w_{DE}(a) shows that, at early times ( a\ll 1 ), the unified dark component behaves as pressureless matter, with w(a)\simeq 0 , independently of the value of \alpha . As the universe expands, w_{DE}(a) evolves toward negative values and enters the quintessence regime -10 ), the same theoretical framework can be naturally extended to the phantom DE case ( \alpha<0 ). In this regime, the cosmological evolution exhibits qualitatively different behavior. In particular, the transition between the matter-dominated and DE-dominated stages occurs at earlier cosmic times as \alpha decreases. The interaction between the vacuum component and matter can lead to effective matter creation, resulting in a slower dilution of the matter energy density compared to the standard scaling, \rho_{m}\propto a^{-3} . Consequently, dark energy may become dynamically relevant at earlier epochs due to the reduced effective matter content at late times. For sufficiently negative values of \alpha , the accelerated expansion can become increasingly pronounced, potentially giving rise to future cosmological scenarios characterized by very rapid expansion, such as Big Rip–like behavior. A detailed investigation of such late-time singularities, however, lies beyond the scope of the present work. , its effective evolution of the DE EoS parameter for \alpha>0 resembles that of freezing quintessence models, with w(a) gradually approaching -1 at late times. Figure 3: Total effective EoS parameter of the unified cosmic fluid (solid lines) and the effective DE EoS parameter (dashed lines) as functions of the scale factor for different values of the vacuum dynamics parameter \alpha in the spatially flat \Lambda(t) CDM model. The numerical solution of Eq. ( 18 ) for the total effective EoS parameter of the unified cosmic fluid in the spatially flat \Lambda(t) CDM model, for positive values of the vacuum dynamics parameter \alpha , is shown in Fig. 3 . By comparing the evolution of w_{tot} with that of the effective DE EoS parameter w_{DE} , we find that, similarly to w_{DE} , increasing positive values of \alpha shift the transition from the matter-dominated epoch to the DE dominated epoch to later times. However, in contrast to w_{DE} , the transition in the evolution of w_{tot} from matter domination to DE domination occurs later than that of w_{DE} for the same fixed value of \alpha . For \alpha=0 , the total effective EoS parameter evolves as w_{tot}(a)=-1+\frac{\Omega_{m0}a^{-3}}{1-\Omega_{m0}+\Omega_{m0}a^{-3}}. All w_{tot} trajectories, independently of the value of \alpha , converge at the present epoch to w_{tot}(a=1)=\Omega_{m0}-1. In our analysis, assuming \Omega_{m0}=0.3038 Morawetz et al. 2025 , this yields w_{tot}(a=1)=-0.6962 . The numerical solution of Eq. ( 22 ) for the reconstructed deceleration parameter q(a) in the spatially flat \Lambda(t) CDM model, assuming positive values of the vacuum dynamics parameter \alpha , over the scale factor range a\in[0.1,1] is presented in Fig. 4 . At early times, q(a)>0 , indicating a decelerated expansion dominated by matter. As the vacuum component becomes dynamically significant, q(a) decreases and eventually crosses zero, marking the transition from decelerated to accelerated expansion of the universe. Our results indicate that increasing \alpha>0 shifts this transition to later epochs, implying that a stronger vacuum–matter interaction delays the onset of cosmic acceleration. Despite these differences in evolutionary trajectories, all solutions converge to the same current value of the deceleration parameter, q_{0}=-0.5443 , corresponding to \Omega_{m0}=0.3038 Morawetz et al. 2025 . Figure 4: Evolution of the deceleration parameter as a function of the scale factor for different values of the vacuum dynamics parameter \alpha in the spatially flat \Lambda(t) CDM model. V.2 Observational constraints of the \Lambda(t) CDM and \Lambda CDM models Based on the MCMC analysis, we obtain the one-dimensional likelihood distributions and the 1 \sigma , 2 \sigma , and 3 \sigma confidence contours for the model parameters using 32 H(z) measurements for the spatially flat \Lambda(t) CDM model (left panel of Fig. 5 ) and the non-flat \Lambda(t) CDM model (right panel of Fig. 5 ). Using the combined dataset of 32 H(z) and 13 BAO measurements, we further derive the joint 1 \sigma , 2 \sigma , and 3 \sigma confidence contours for the spatially flat and non-flat \Lambda(t) CDM models (Fig. 6 ), as well as for the standard flat \Lambda CDM model and its non-flat extension (Fig. 7 ). Figure 5: One-dimensional likelihoods and 1 \sigma , 2 \sigma and 3 \sigma confidence levels contours constraints on the parameters of the \Lambda(t) CDM model from H(z) measurements: for the flat space (left panel) and the non-flat space (right panel). Figure 6: One-dimensional likelihoods and 1 \sigma , 2 \sigma and 3 \sigma confidence levels contours constraints on the parameters of the \Lambda(t) CDM model from the combination of H(z) + BAO measurements: for the flat space (left panel) and the non-flat space (right panel). Figure 7: One-dimensional likelihoods and 1 \sigma , 2 \sigma and 3 \sigma confidence levels contours constraints on the parameters of the \Lambda CDM model from the combination of H(z) + BAO measurements: for the flat space (left panel) and the non-flat space (right panel). The one-dimensional posterior median values and their 1 \sigma uncertainties for the flat and non-flat \Lambda CDM and \Lambda(t) CDM models, obtained from various combinations of H(z) and H(z) +BAO data, are summarized in Table 2 . Using H(z) data alone leads to relatively large uncertainties in all models, particularly for the spatially non-flat \Lambda(t) CDM scenario. For this model, we find H_{0}=61.08^{+9.60}_{-6.38}~{\rm km~s^{-1}Mpc^{-1}} , \Omega_{m0}=0.214^{+0.237}_{-0.173} , \Omega_{k0}=0.236^{+0.253}_{-0.274} , and \alpha=0.475^{+1.633}_{-0.835} , indicating weak constraints and strong parameter degeneracies. In contrast, the flat \Lambda(t) CDM model and both flat and non-flat \Lambda CDM models provide H_{0}\sim 67 – 68~{\rm km~s^{-1}Mpc^{-1}} with broader uncertainties compared to the combined datasets, while the parameter \alpha remains statistically consistent with zero in the spatially flat and non-flat \Lambda(t) CDM models. The inclusion of BAO data significantly tightens the parameter constraints for all models (see Table 2 ). For the non-flat \Lambda(t) CDM model, we find H_{0}=67.76\pm 1.66~{\rm km~s^{-1}Mpc^{-1}} , \Omega_{m0}=0.328^{+0.049}_{-0.045} , \Omega_{k0}=0.009^{+0.050}_{-0.044} , and \alpha=-0.081\pm 0.133 , favoring a spatially flat universe and a matter density parameter \Omega_{m0} compatible with that of the standard \Lambda CDM model. Similarly, the flat \Lambda(t) CDM model results in H_{0}=67.87\pm 0.91~{\rm km~s^{-1}Mpc^{-1}} , \Omega_{m0}=0.344^{+0.040}_{-0.035} , and \alpha=-0.127\pm 0.097 , with the inclusion of BAO data substantially reducing uncertainties in \alpha while maintaining consistency with zero. In both spatially flat and non-flat \Lambda CDM models, BAO data reduce the uncertainties in the H_{0} and \Omega_{m0} parameters by a factor of 3–6 and constrain the \Omega_{k0} parameter close to zero; in the spatially non-flat \Lambda CDM scenario, \Omega_{k0}=0.024^{+0.043}_{-0.038} , again favoring a nearly flat geometry. Consequently, the inclusion of BAO data reduces the Hubble tension with the Planck CMB result 4 4 4 We emphasize that the quoted Planck CMB constraint on H_{0} is obtained under the assumption of the standard \Lambda CDM cosmological model. A dedicated CMB analysis within the \Lambda(t) CDM framework would, in general, yield different parameter estimates and could alter the level of statistical agreement with the Planck CMB result. Such an analysis is beyond the scope of the present work, and the Planck CMB constraint is therefore used here solely as a reference benchmark. to less than 1\sigma for all models, and reduce the tension with SH0ES to \sim 2.6–3.2\sigma . Thus, the inclusion of BAO data substantially reduces parameter degeneracies and leads to mutually consistent cosmological parameter estimates across all considered models, while the vacuum dynamics parameter \alpha remains statistically consistent with zero in spatially flat and non-flat \Lambda CDM models. We evaluated the performance of the flat and non-flat \Lambda(t) CDM and \Lambda CDM models using goodness-of-fit statistics and information criteria based on the H(z) and combined H(z) +BAO data sets (see Tables 3 - 4 ). All models provide an excellent fit to the H(z) data, with \chi^{2}_{\min}/\mathrm{dof}\simeq 0.5 (see Table 3 ). When using H(z) data alone, both flat and non-flat \Lambda(t) CDM models suffer from large uncertainties in their cosmological parameters, with the non-flat scenario exhibiting weak constraints on H_{0} , \Omega_{m0} , \Omega_{k0} , and \alpha parameters, reflecting strong parameter degeneracies (see Table 2 ). The flat \Lambda(t) CDM model provides comparatively tighter constraints; however, the vacuum dynamics parameter \alpha remains consistent with zero within the 1\sigma , indicating that there are no statistically significant deviations from the standard \Lambda CDM model. A comparison based on information criteria ( AICc and BIC ) reveals a clear preference for the flat \Lambda CDM model. Although the non-flat \Lambda(t) CDM model achieves the lowest \chi^{2}_{\min} value when using H(z) data alone, this improvement is insufficient to compensate for the penalty associated with the additional parameter \alpha . When BAO data are included, the discriminating power of the information criteria increases significantly, with all models continuing to provide comparably good fits ( \chi^{2}_{\min}/\mathrm{dof}\simeq 0.6 ). Nevertheless, both AIC and BIC strongly favor the flat \Lambda CDM model. Although the flat \Lambda(t) CDM model attains the minimum \chi^{2}_{\min} value in this case, the additional parameter \alpha is penalized by the information criteria, leading to a clear preference for the simpler \Lambda CDM scenario. The Akaike weights indicate that the flat \Lambda CDM model carries approximately 44 – 58\% of the total statistical support, while extended models with vacuum dynamics or spatial curvature receive substantially less weight. As a result, the inclusion of BAO data significantly reduces parameter degeneracies and reinforces the preference for standard flat \Lambda CDM cosmology. Table 2: One-dimensional posterior median values of the model parameters with their 1\sigma uncertainties for the flat and non-flat \Lambda(t) CDM and \Lambda CDM models from the H(z) and H(z) +BAO datasets. Model Data H_{0} a \Omega_{m0} \Omega_{k0} \alpha Flat \Lambda(t) CDM H(z) 67.91\pm 1.62 0.312^{+0.024}_{-0.031} - -0.035^{+0.093}_{-0.071} H(z) +BAO 67.87\pm 0.91 0.344^{+0.040}_{-0.035} - -0.127\pm 0.097 Non-flat \Lambda(t) CDM H(z) 61.08^{+9.60}_{-6.38} 0.214^{+0.237}_{-0.173} 0.236^{+0.253}_{-0.274} 0.475^{+1.633}_{-0.835} H(z) +BAO 67.76\pm 1.66 0.328^{+0.049}_{-0.045} 0.009^{+0.050}_{-0.044} -0.081\pm 0.133 Flat \Lambda CDM H(z) 67.66\pm 3.05 0.326^{+0.067}_{-0.054} - - H(z) +BAO 68.90\pm 0.49 0.298\pm 0.009 - - Non-flat \Lambda CDM H(z) 67.99\pm 3.83 0.350^{+0.124}_{-0.133} -0.062^{+0.404}_{-0.354} - H(z) +BAO 68.68\pm 0.60 0.294\pm 0.011 0.024^{+0.043}_{-0.038} - a km s -1 Mpc -1 Table 3: Goodness-of-fit and model comparison criteria for the flat and non-flat \Lambda(t) CDM and \Lambda CDM models, based on the H(z) data. \rm Model \rm\chi^{2}_{min} \rm\Delta\chi^{2}_{min} \rm dof \rm\chi^{2}_{min}/dof \rm AICc \rm BIC \Delta\rm AICc \Delta\rm BIC w_{i} Flat \Lambda(t) CDM 14.68 0.57 29 0.506 21.54 25.08 2.39 3.42 0.177 Non-flat \Lambda(t) CDM 14.11 0.00 28 0.504 23.59 27.97 4.45 6.31 0.063 Flat \Lambda CDM 14.73 0.62 30 0.491 19.14 21.66 0.00 0.00 0.584 Non-flat \Lambda CDM 14.69 0.58 29 0.507 21.55 25.09 2.40 3.43 0.176 Table 4: Goodness-of-fit and model comparison criteria for the flat and non-flat \Lambda(t) CDM and \Lambda CDM models, based on the H(z) + BAO data. \rm Model \rm\chi^{2}_{min} \rm\Delta\chi^{2}_{min} \rm dof \rm\chi^{2}_{min}/dof \rm AIC \rm BIC \Delta\rm AIC \Delta\rm BIC w_{i} Flat \Lambda(t) CDM 24.44 0.00 42 0.582 30.44 35.86 0.99 2.80 0.269 Non-flat \Lambda(t) CDM 24.47 0.03 41 0.597 32.47 39.70 3.02 6.63 0.097 Flat \Lambda CDM 25.45 1.01 43 0.592 29.45 33.06 0.00 0.00 0.441 Non-flat \Lambda CDM 25.10 0.66 42 0.598 31.10 36.52 1.65 3.46 0.193 VI Conclusions We analyze the dynamical behavior of the spatially flat \Lambda(t) CDM model by studying the expansion history of the universe through the normalized Hubble rate E(a) , including the effective EoS parameter of the unified cosmic fluid w_{tot}(a) , the effective DE EoS parameter w_{DE}(a) , and the deceleration parameter q(a) . In the spatially flat \Lambda(t) CDM framework, the vacuum dynamics parameter \alpha plays a key role in shaping cosmic expansion. For \alpha<0 , the expansion rate E(a) decreases more slowly than in the standard \Lambda CDM model, resembling a phantom-like DE behavior, while for \alpha>0 , E(a) decreases faster, similar to quintessence-like DE models (see Fig. 2 ). The explicit expressions for w_{tot}(a) , w_{DE}(a) (Eqs. 18 and 23 , respectively), and q(a) (Eq. 22 ) show that positive values of \alpha , corresponding to a freezing quintessence-like vacuum, systematically delay the onset of cosmic acceleration. This behavior is consistently reflected in the evolution of w_{tot}(a) and w_{DE}(a) , which remain close to zero for a longer period before entering the negative-pressure regime (Fig. 3 ), as well as in the evolution of q(a) , for which the transition from deceleration to acceleration occurs at later epochs (Fig. 4 ). In contrast to w_{DE}(a) , the transition in the evolution of w_{tot}(a) from matter domination to DE domination occurs later for the same fixed value of \alpha , reflecting the contribution of residual matter to the total cosmic fluid. The contribution of residual matter to w_{tot}(a) is evident both in the limit \alpha=0 , where the spatially flat \Lambda(t) CDM model reduces to the standard \Lambda CDM scenario with w_{DE}(a)=-1 , while w_{tot}(a)=-1+\frac{\Omega_{m0}a^{-3}}{(1-\Omega_{m0}+\Omega_{m0}a^{-3})} , and at the present epoch, where all trajectories of w_{DE}(a) converge to w_{DE}(a=1)=-1 , while w_{tot}(a=1)=-1+\Omega_{m0}=-\Omega_{DE0} . Consequently, the \Lambda(t) CDM model approaches the standard \Lambda CDM scenario only asymptotically in the future, rather than reproducing it exactly at the present epoch. Despite these late-time modifications, the \Lambda(t) CDM model preserves standard matter-like behavior at early times, ensuring consistency with large-scale structure formation. Overall, the \Lambda(t) CDM model represents a physically viable extension of the standard \Lambda CDM framework, in which vacuum dynamics shifts the epoch of cosmic acceleration without altering the early evolution of the universe. Based on MCMC analysis, we constrain the parameters of both spatially flat and non-flat \Lambda(t) CDM models using 32 H(z) measurements from cosmic chronometers ( z\in[0.07,1.965] ) and 13 BAO measurements from DESI DR2 ( z\in[0.295,2.330] ). The one-dimensional likelihoods and 1\sigma , 2\sigma , and 3\sigma confidence contours from H(z) alone and in combination H(z) +BAO data are shown in Figs. 5 – 7 . Using H(z) data alone leads to large uncertainties, particularly in the non-flat \Lambda(t) CDM model, where strong parameter degeneracies are present. The vacuum dynamics parameter \alpha remains statistically consistent with zero in all \Lambda(t) CDM scenarios. The inclusion of BAO data substantially tightens parameter constraints for all models. For the non-flat \Lambda(t) CDM model, we find H_{0}=67.76\pm 1.66~{\rm km~s^{-1}Mpc^{-1}} , \Omega_{m0}=0.328^{+0.049}{-0.045} , \Omega_{k0}=0.009^{+0.050}{-0.044} , and \alpha=-0.081\pm 0.133 , favoring a nearly flat universe with matter density parameter \Omega_{m0} compatible with the standard \Lambda CDM model. The flat \Lambda(t) CDM model yields similar values with slightly tighter constraints. In both flat and non-flat \Lambda CDM models, the BAO data reduce the uncertainties in the H_{0} and \Omega_{m0} parameters by a factor of 3–6 and constrain the curvature density parameter \Omega_{k0} close to zero. Consequently, the Hubble tension with Planck CMB measurements is reduced to below 1\sigma , and the tension with SH0ES decreases to \sim 2.6–3.2\sigma . The fit and information criteria ( AICc and BIC ) indicate a clear preference for the flat \Lambda CDM model. Although the \Lambda(t) CDM models, particularly the non-flat case, can achieve slightly lower \chi^{2}_{\min} values, the additional parameter \alpha is penalized, resulting in less statistical support. The Akaike weights show that the flat \Lambda CDM model accounts for 44-58\% of the total support, with extended models receiving substantially less. As a result, the inclusion of BAO data reduces parameter degeneracies and drives all models toward a spatially flat universe with parameters consistent with the standard \Lambda CDM model. Appendix A Derivation of the total effective EoS parameter of the unified cosmic fluid in the spatially flat \Lambda(t) CDM model For the unified cosmic fluid, the effective EoS parameter is defined as w_{tot}(a)=-1-\frac{1}{3}\frac{d\ln\rho_{tot}}{d\ln a}. (10) Since the total energy density scales as \rho_{tot}\propto E^{2}(a) , where the dimensionless Hubble parameter E(a) is defined in Eq. ( 5 ) under the assumptions \Omega_{r0}=0 and \Omega_{k0}=0 , this expression can be rewritten as w_{tot}(a)=-1-\frac{1}{3}\frac{d\ln E^{2}}{d\ln a}. (11) Using \ln E^{2}=\frac{1}{1+\alpha}\ln X, (12) one finds \frac{d\ln E^{2}}{d\ln a}=\frac{1}{1+\alpha}\frac{1}{X}\frac{dX}{d\ln a}, (13) where X=(1-\Omega_{m0})+\Omega_{m0}a^{-3(1+\alpha)}. (14) The derivative of X with respect to \ln a is given by \frac{dX}{d\ln a}=-3(1+\alpha)\Omega_{m0}a^{-3(1+\alpha)}. (15) Substituting this result into Eq. ( 13 ), we obtain \frac{d\ln E^{2}}{d\ln a}=-\frac{3\Omega_{m0}a^{-3(1+\alpha)}}{X}, (16) which, when inserted into Eq. ( 11 ), yields the expression for the unified total EoS parameter w_{tot}(a)=-1+\frac{\Omega_{m0}a^{-3(1+\alpha)}}{X}. (17) Equivalently, Eq. ( 17 ) can be written as w_{tot}(a)=-1+\frac{\Omega_{m0}a^{-3(1+\alpha)}}{1-\Omega_{m0}+\Omega_{m0}a^{-3(1+\alpha)}}. (18) Appendix B Derivation of the effective DE EoS and deceleration parameters in the spatially flat \Lambda(t) CDM model In a spatially flat, radiation-free universe ( \Omega_{k0}=\Omega_{r0}=0 ), the effective dark DE EoS parameter can be reconstructed from the deceleration parameter q(a) as Saini et al. 2000 w_{DE}(a)=\frac{2q(a)-1}{3\big(1-\Omega_{m}(a)\big)},\quad\text{with}\quad\Omega_{m}(a)=\frac{\Omega_{m0}a^{-3}}{E^{2}(a)}. (19) The deceleration parameter is defined as q(a)=-1-a\frac{d\ln H}{da}. (20) Using Eq. ( 5 ) and Eq. ( 14 ), the derivative with respect to the scale factor is determined as \frac{d\ln H}{da}=\frac{1}{E}\frac{dE}{da}=\frac{1}{2(1+\alpha)}X^{-1}\frac{dX}{da}=\\ \frac{1}{2(1+\alpha)}X^{-1}\Big[-3(1+\alpha)\Omega_{m0}a^{-3(1+\alpha)-1}\Big]=\\ -\frac{3}{2}\frac{\Omega_{m0}a^{-3(1+\alpha)-1}}{X}. (21) This gives the deceleration parameter q(a)=-1-a\frac{d\ln H}{da}=-1+\frac{3}{2}\frac{\Omega_{m0}a^{-3(1+\alpha)}}{X}. (22) Substituting Eq. ( 22 ) into Eq. ( 19 ), we obtain the explicit form of the DE EoS parameter in the \Lambda(t) CDM model w_{DE}(a)=-\frac{1-\Omega_{m0}a^{-3(1+\alpha)}X^{-1}}{1-\Omega_{m0}a^{-3}X^{-\frac{1}{1+\alpha}}},~{\rm with}~\alpha\neq-1. (23) This expression naturally reduces to the standard \Lambda CDM limit w_{DE}=-1 when \alpha=0 .