Invariant Curves and the Variational Structure in Tubular Origami Dynamical Systems Preprint: AIP/123-QED Ryutaro. Ichikawa, Mitsuru. Shibayama Abstract We present a rigorous dynamical systems analysis of tubular origami tessellations by identifying the inverse module number, N − 1 N^{-1} , as a perturbation parameter within the framework of Kolmogorov–Arnold–Moser (KAM) theory. In the large-module limit ( N → ∞ N\to\infty ), we prove that the conservative dynamics converges to an integrable map with a variational structure, whose generating function corresponds to the total discrete mean curvature. Although the geometric interpretation of the generating function becomes more complex under perturbations, it is straightforward in the integrable limit, where its structure can be clearly understood. This limit also provides a fundamental framework for characterizing the global behavior of the system. The KAM-predicted persistence of invariant curves is supported by numerical results showing a phase space densely populated with such curves. By adjusting mountain–valley fold assignments and fold lengths, the system can be transformed into a nontwist map that exhibits multiple zero frequencies. The resonance associated with these zero frequencies leads to the emergence of new stable foldable regions in phase space, appearing as elliptic islands. These regions enable the design of foldable configurations that are inaccessible within standard twist regimes. Finally, we analyze the expanding and contracting dynamics of the origami structure within the framework of conformally symplectic systems. By introducing a virtual auxiliary fold as a drift control mechanism, we numerically confirm the existence of stable quasi-periodic attractors. Origami tessellations , consisting of periodic crease patterns, exhibit highly nontrivial nonlinear folding behavior when individual modules deform non-uniformly. In such systems, the spatial propagation of fold states can be formulated as an area-preserving discrete dynamical map . Although these maps admit a variational formulation through generating functions, the geometric origin of this structure has remained unclear due to the analytical complexity of the folding map. In this study, we identify an integrable limit obtained in the large-module regime where the number of modules tends to be infinite. This integrable limit serves as an organizing backbone for the full dynamics, enabling an explicit characterization of its variational structure . We show that the associated generating function is identical to a fundamental geometric quantity: the total discrete mean curvature of the folded surface. This result establishes a rigorous geometric law governing origami folding dynamics. Furthermore, it provides a unified framework for the global analysis of origami structures, opening new avenues for the creation of novel folding configurations and the theoretical development of the geometry of folded surfaces. I INTRODUCTION Figure 1: Schematic illustration of the waterbomb tube origami tessellation. Left: The crease pattern where red, blue, and black lines represent mountain folds, valley folds, and boundary lines, respectively. The top and bottom edges are identified. Right: The 3D cylindrical structure obtained by nonuniform-folding. The light green polygon indicates a single module, and the yellow region highlights a ring consisting of N modules. These colored regions correspond to each other in both figures. Origami-inspired mechanical metamaterials have garnered significant interest as adaptable structural systems because of their high deployability and adjustable mechanical stiffness. Notable applications span a wide range of fields 14 , including deployable solar panels for aerospace systems 24 , biomedical stents 11 , architectural structures 22 , and soft robotics 20 . Owing to the geometric complexity inherent in origami folding, prior studies have largely focused on origami tessellations, in which periodic crease patterns undergo repeated folding operations. Much of existing engineering-oriented research has been built on uniformly folded configurations, where all unit cells deform identically. While such uniform-folding provides a convenient foundation for practical applications 21 ; 18 ; 9 ; 23 , the range of achievable mechanical responses and geometric configurations remains inherently limited. To overcome these limitations, recent studies 16 ; 5 ; 25 ; 6 ; 7 ; 8 have proposed novel mathematical frameworks to describe nonuniform-folding processes, formulating the evolution of origami tessellations as dynamical systems 6 ; 7 ; 8 . This approach naturally leads to discrete-time dynamical descriptions, where the folding state propagates throughout the tessellation. In particular, for tubular tessellations, it has been established that this propagation is governed by a symplectic (area-preserving ) map 7 , indicating the existence of conserved quantities analogous to those found in Hamiltonian mechanics 13 . However, the resulting symplectic map has a highly complex analytical structure, making it difficult to explicitly identify the underlying variational structure. To address this challenge, we consider the regime with a sufficiently large number of modules. In this limit, the system approaches an integrable state, where the variational structure becomes analytically accessible. This integrable system reveals the geometric origin of the conservation laws and provides a solid foundation for understanding the global dynamics, as the persistence of invariant curves is supported theoretically KAM theory 12 ; 1 . In this study, we conduct a global dynamical systems analysis of origami tessellations and examine their variational structure by treating the inverse module number, N^{-1} , as a perturbation parameter within the framework of KAM theory. We demonstrate that, when the number of modules is sufficiently large, the system simplifies to an integrable dynamical system and rigorously derive its generating function. Specifically, for symmetric crease patterns, we identify this generating function as the total discrete mean curvature, providing a clear geometric interpretation of the conserved quantity that governs the dynamics of tubular origami. Based on this integrable structure, we establish the existence of invariant curves and confirm their persistence under finite- N perturbations, as predicted by KAM theory. Furthermore, our analysis of the generating function reveals that the system’s frequency depends sensitively on the mountain–valley fold assignments. By appropriately tuning these parameters, we can violate the twist condition , leading to the emergence of nontwist dynamical behavior in tubular origami tessellations. In the nontwist regime, the frequency profile can exhibit multiple zero values, and the resonances associated with these points give rise to new stable foldable regions in phase space, appearing as islands of elliptic periodic orbits. We numerically confirm the emergence of these structures and establish their correspondence with physically realizable folding configurations. Finally, we observe that the two-degree-of-freedom origami system can be formulated as a conformally symplectic (CS) system , characterized by a constant Jacobian determinant. It is known that CS systems can support stable quasi-periodic attractors through the introduction of a drift term that counteracts phase-space expansion or contraction 3 . Motivated by this insight, we introduce a virtual fold designed to generate such a drift term and numerically demonstrate the existence of stable quasi-periodic attractors in the resulting folding dynamics. This paper is organized as follows. Sec. II presents the tubular origami model and describes the discrete dynamical system that governs its folding behavior, emphasizing its CS structure. Sec. III describes the theoretical analysis, demonstrating the reduction to an integrable system, clarifying the geometric interpretation of the underlying variational structure, and examining the existence of invariant curves using generating functions. Sec. IV presents the results of numerical experiments, highlighting phase space structures such as KAM tori and a KAM attractor. Finally, Sec. V summarizes our main conclusions. II THE TUBULAR ORIGAMI MODEL In this section, we introduce the discrete dynamical system for tubular origami tessellations proposed in previous studies 7 , which serves as the fundamental framework throughout this paper. As illustrated in Fig. 1 , we consider an origami tessellation composed of identical modules arranged in a periodic crease pattern (left), which forms a three-dimensional cylindrical structure upon folding (right). A collection of N modules ( N\in\mathbb{Z}_{>2} ), corresponding to the yellow region in the crease pattern, is referred to as a ring . This ring serves as the basic unit of the discrete dynamical system considered in this study. Figure 2: Ring and zigzags as constitutive elements. (Left) The crease pattern of the ring shown in Fig. 1 and its corresponding folded configuration. (Right) Structural decomposition into zigzags. The solid lines in pink, light blue, and yellow-green represent adjacent zigzags (the 0-th, 1-st, and 2-nd zigzags, respectively), illustrating how the global structure is formed by their concatenation along the cylindrical axis. II.1 Modeling and Parameterization As a representative example, we consider the waterbomb tube, which serves as a canonical model for tubular origami tessellations. As illustrated in Fig. 2 , the entire structure can be decomposed into a periodic sequence of closed polygonal chains, referred to as zigzags . We focus on the discrete evolution of the zigzag geometry along the cylindrical axis. By assuming an N -fold rotational symmetry of the folded configuration, the geometric information of an entire ring is reduced to that of a single module. Accordingly, we introduce a parametrization of the zigzag associated with a single unit cell. First, we define a global Cartesian coordinate system (X,Y,Z) such that the X -axis aligns with the central axis of the folded cylinder. Within this framework, the continuous zigzag path wrapping around the cylinder can be interpreted as a concatenation of discrete zigzag segments derived from individual modules, each obtained by successive rotation about the X -axis by an angle 2\pi/N . Focusing on a single representative module as shown in Fig. 3 , we denote the vertices of the zigzag element by U_{1} , U_{2} , and U_{3} . To establish a local reference frame for this module, the Y -axis is chosen to align with the direction of the vector \overrightarrow{U_{3}U_{1}} . The Z -axis is defined to be vertical such that the endpoints U_{1} and U_{3} lie in the YZ -plane (i.e., the plane X=0 ). Let \mathbf{r}_{U_{j}} (j=1,2,3) denote the position vectors of the vertices U_{j} . The geometry of the zigzag element is characterized by prescribed positive crease lengths l_{L}\in\mathbb{R}_{>0} and l_{R}\in\mathbb{R}_{>0} , which impose geometric distance constraints on the vertex positions. We define \mathbf{r}_{V_{\sigma}} as a point determined by the intersection of three spheres centered at \mathbf{r}_{U_{j}} , each with radius r_{j}>0 (j=1,2,3) , namely, \|\mathbf{r}_{V_{\sigma}}-\mathbf{r}_{U_{j}}\|=r_{j},\qquad j=1,2,3. Since the intersection of three spheres generically yields two distinct solutions, the physically realized configuration is selected according to the mountain–valley assignment \sigma . Using this geometric setup, we introduce a set of state variables (\theta,I)\in(-\pi,\pi]\times\left(|l_{L}-l_{R}|/2,(l_{L}+l_{R})/2\right) to characterize the geometry of a single zigzag module. These variables are defined by \displaystyle I \displaystyle= \displaystyle\frac{1}{2}\left\|\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}}\right\|, (1) \displaystyle\theta \displaystyle= \displaystyle\arctan 2\!\left(\left(\mathbf{e}_{X}\times\frac{\mathbf{v}}{\|\mathbf{v}\|}\right)\cdot\frac{\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}}}{2I},\mathbf{e}_{X}\cdot\frac{\mathbf{v}}{\|\mathbf{v}\|}\right), (2) where \mathbf{e}_{X}=[1,0,0]^{T} and \mathbf{v}=\mathbf{r}_{U_{2}}-\mathbf{r}_{U_{M}} . Here, \mathbf{r}_{U_{M}} denotes the foot of the perpendicular dropped from U_{2} onto the line segment U_{1}U_{3} . Figure 3: Parametrization of the zigzag within a module. The zigzag segment defined by vertices U_{1},U_{2} , and U_{3} (the i -th zigzag) is uniquely determined by the state variables (\theta,I) . Here, I is defined as half the Euclidean distance between U_{1} and U_{3} , and \theta is defined as the angle formed by the vector \overrightarrow{U_{M}U_{2}} relative to the central cylinder axis ( X -axis). The position of the vertex V_{\sigma} in the subsequent ( i+1 )-th zigzag is determined by the intersection of three spheres centered at U_{1},U_{2} , and U_{3} . The explicit expressions for the position vectors \mathbf{r}_{U_{1}} , \mathbf{r}_{U_{2}} , \mathbf{r}_{U_{3}} , and \mathbf{r}_{U_{M}} are given by \displaystyle\mathbf{r}_{U_{1}} \displaystyle= \displaystyle\left[0,I,I\cot\frac{\pi}{N}\right]^{T}, (3) \displaystyle\mathbf{r}_{U_{2}} \displaystyle= \displaystyle\left[0,I-l_{L}\alpha(I),I\cot\frac{\pi}{N}\right]^{T} (4) \displaystyle+l_{L}\beta(I)\left[\cos\theta,0,\sin\theta\right]^{T}, \displaystyle\mathbf{r}_{U_{3}} \displaystyle= \displaystyle\mathbf{R}_{X}\!\left(\frac{2\pi}{N}\right)\mathbf{r}_{U_{1}}=\left[0,-I,I\cot\frac{\pi}{N}\right]^{T}, (5) \displaystyle\mathbf{r}_{U_{M}} \displaystyle= \displaystyle\mathbf{r}_{U_{1}}+l_{L}\alpha(I)\left(\frac{\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}}}{2I}\right), (6) where \mathbf{R}_{X}\!\left(2\pi/N\right) denotes the rotation matrix associated with a rotation of angle 2\pi/N about the X -axis. The functions \alpha(I) and \beta(I) are defined as \alpha(I)=\frac{l_{L}^{2}+(2I)^{2}-l_{R}^{2}}{2l_{L}(2I)},\qquad\beta(I)=\sqrt{1-\alpha^{2}(I)}. (7) Next, we introduce a local coordinate system attached to the vertex U_{1} . Let the origin be located at \mathbf{r}_{U_{1}} , and define an orthonormal basis \{\mathbf{e}_{1},\mathbf{e}_{2},\mathbf{e}_{3}\} by \displaystyle\mathbf{e}_{1} \displaystyle= \displaystyle\frac{\mathbf{r}_{U_{2}}-\mathbf{r}_{U_{1}}}{\|\mathbf{r}_{U_{2}}-\mathbf{r}_{U_{1}}\|}=\left[\beta\cos\theta,-\alpha,\beta\sin\theta\right]^{T}, (8) \displaystyle\mathbf{e}_{2} \displaystyle= \displaystyle\frac{(\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})-\left((\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{1}\right)\mathbf{e}_{1}}{\sqrt{\|\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}}\|^{2}-\left((\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{1}\right)^{2}}} (9) \displaystyle= \displaystyle-\left[\alpha\cos\theta,\beta,\alpha\sin\theta\right]^{T} \displaystyle\mathbf{e}_{3} \displaystyle= \displaystyle\mathbf{e}_{1}\times\mathbf{e}_{2}=\left[\sin\theta,0,-\cos\theta\right]^{T}. (10) In this local coordinate system, the position vector of V_{\sigma} is expressed as \mathbf{r}_{V_{\sigma}}=\mathbf{r}_{U_{1}}+e_{1}\mathbf{e}_{1}+e_{2}\mathbf{e}_{2}+e_{3}\mathbf{e}_{3}, (11) where the scalar components e_{1} , e_{2} , and e_{3} are determined by the intersection of three spheres centered at \mathbf{r}_{U_{1}} , \mathbf{r}_{U_{2}} , and \mathbf{r}_{U_{3}} , with radii r_{1}>0 , r_{2}>0 , and r_{3}>0 , respectively. The components e_{1} , e_{2} , and e_{3} are explicitly given by \displaystyle e_{1} \displaystyle= \displaystyle\frac{r_{1}^{2}+\|\mathbf{r}_{U_{2}}-\mathbf{r}_{U_{1}}\|^{2}-r_{2}^{2}}{2\|\mathbf{r}_{U_{2}}-\mathbf{r}_{U_{1}}\|}=\frac{r_{1}^{2}+l_{L}^{2}-r_{2}^{2}}{2l_{L}}, (12) \displaystyle e_{2} \displaystyle= \displaystyle\frac{1}{2\,(\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{2}}\Bigl(r_{1}^{2}-r_{3}^{2}+\left((\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{1}\right)^{2} (13) \displaystyle+\left((\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{2}\right)^{2}-2e_{1}(\mathbf{r}_{U_{3}}-\mathbf{r}_{U_{1}})\cdot\mathbf{e}_{1}\Bigr) \displaystyle= \displaystyle\frac{r_{1}^{2}-r_{3}^{2}+4I^{2}-4Ie_{1}\alpha}{4I\beta} \displaystyle e_{3} \displaystyle= \displaystyle\sigma\sqrt{\gamma}, (14) where \gamma=r_{1}^{2}-e_{1}^{2}-e_{2}^{2} and the sign \sigma=\pm 1 corresponds to the mountain–valley assignment ( \sigma(M)=1,\sigma(V)=-1 ). Finally, as illustrated in Fig. 2 , the (i+1) -th zigzag is generated from the i -th zigzag with a one-step circumferential offset. Accordingly, when computing the parameters (\theta^{\prime},I^{\prime}) of the next zigzag, we select the vertices of the zigzag element as follows: the position vector of the new U_{1} is taken to be \mathbf{r}_{V_{\sigma}} , that of the new U_{2} is chosen as \mathbf{r}_{U_{3}} , and that of the new U_{3} is given by \mathbf{R}_{X}\!\left(2\pi/N\right)\mathbf{r}_{V_{\sigma}} . Applying the definitions of I and \theta given in Eqs. ( 1 ) and ( 2 ) to this new triplet of vertex position vectors yields the updated state variables (\theta^{\prime},I^{\prime}) . This construction defines a discrete evolution of the zigzag geometry along the axial direction of the tubular origami. II.2 Definition of the Discrete Dynamical System Figure 4: Two distinct patterns of zigzag connectivity. (A) The configuration involving a circumferential shift, which corresponds to the waterbomb tube structure. (B) The configuration where V_{\sigma} is constructed directly from the original zigzag without a shift. In this pattern, a re-parametrization of the state variables (\theta,I) is required. Based on the geometric construction and parametrization introduced in Sec. II.1 , we now define the discrete dynamical system that governs the evolution of the zigzag geometry along the axial direction of the tubular origami. Let the map \mathbf{f} that sends (\theta,I) to (\theta^{\prime},I^{\prime}) through the three-sphere intersection be defined as \displaystyle\left[\theta^{\prime},I^{\prime}\right]^{T}:=\mathbf{f}\left(\left[\theta,I\right]^{T};l_{L},l_{R},N,r_{1},r_{2},r_{3},\sigma\right) (15) \displaystyle\theta^{\prime} \displaystyle= \displaystyle\arctan 2\left(\left(\mathbf{e}_{X}\times\frac{\mathbf{v}}{\|\mathbf{v}\|}\right)\cdot\frac{\mathbf{u}}{\|\mathbf{u}\|},\mathbf{e}_{X}\cdot\frac{\mathbf{v}}{\|\mathbf{v}\|}\right), (16) \displaystyle I^{\prime} \displaystyle= \displaystyle\frac{1}{2}\|\mathbf{u}\|, (17) where \mathbf{E} denotes the 3\times 3 identity matrix and \displaystyle\mathbf{u} \displaystyle= \displaystyle\begin{bmatrix}0\\ -2I\\ 0\end{bmatrix}+\left(\mathbf{R}_{X}\!\left(\frac{2\pi}{N}\right)-\mathbf{E}\right)\left(\mathbf{e}_{1}\ \mathbf{e}_{2}\ \mathbf{e}_{3}\right)\begin{bmatrix}e_{1}\\ e_{2}\\ e_{3}\end{bmatrix}, (18) \displaystyle\mathbf{v} \displaystyle= \displaystyle\mathbf{r}_{U_{3}}-\left(\mathbf{r}_{V_{\sigma}}+r_{3}\left(\frac{r_{3}^{2}+(2I^{\prime})^{2}-r_{1}^{2}}{2r_{3}(2I^{\prime})}\right)\frac{\mathbf{u}}{2I^{\prime}}\right). (19) When the tube consists of m\in\mathbb{Z}_{>0} zigzags indexed by i=0,\dots,{m-1} , we allow the geometric parameters to vary along the axial direction. For the i -th zigzag, the left, middle, and right crease lengths are denoted by l_{i,L} , l_{i,M} , and l_{i,R} , respectively. To ensure consistency with the periodic arrangement of identical modules along the axial direction, we impose periodic boundary conditions such that l_{m,L}=l_{0,L} , l_{m,M}=l_{0,M} , and l_{m,R}=l_{0,R} . The map \mathbf{f}_{i} describing the transition from the i -th zigzag to the (i+1) -th zigzag is then defined as follows: \mathbf{f}_{i}\left(\left[\theta,I\right]^{T}\right)=\mathbf{f}\left(\left[\theta,I\right]^{T};l_{i,L},l_{i,R},N,l_{i+1,R},l_{i+1,M},l_{i+1,L},\sigma_{i}\right). (20) Figure 5: Crease patterns for two representative module configurations. (A) A configuration featuring six-valent vertices, which corresponds to a generalization of the waterbomb tessellation. (B) A configuration characterized by four- or eight-valent vertices. In both panels, different colors indicate distinct zigzags, and the gray shaded region represents the fundamental domain of a single module. As shown in Fig. 4 , zigzag modules can be connected in two topologically distinct ways. The map \mathbf{f} considers only type (A) connectivity, where consecutive zigzags are joined with a circumferential offset. For modules with type (B) connectivity, however, the parameters (\theta,I) obtained from \mathbf{f} do not directly represent the geometric state of the next zigzag and must be reparametrized. To account for this, we introduce a map \mathbf{g} : \displaystyle\left[\theta^{*},I^{*}\right]^{T} \displaystyle:= \displaystyle\mathbf{g}\left(\left[\theta,I\right]^{T};r_{3},r_{1},N\right), (21) \displaystyle\theta^{*} \displaystyle= \displaystyle\arctan 2\left(Y_{g},X_{g}\right), (22) \displaystyle I^{*} \displaystyle= \displaystyle\frac{\sin\frac{\pi}{N}}{4I}\sqrt{\left(r_{3}^{2}-r_{1}^{2}\right)^{2}+T_{2}^{2}}, (23) where \displaystyle T_{1} \displaystyle= \displaystyle\sqrt{16I^{2}r_{3}^{2}-\left(4I^{2}+r_{3}^{2}-r_{1}^{2}\right)^{2}}, (24) \displaystyle T_{2} \displaystyle= \displaystyle 4I^{2}\cot\frac{\pi}{N}+T_{1}\sin\theta, (25) \displaystyle Y_{g} \displaystyle= \displaystyle-\sin\frac{\pi}{N}\Biggl(T_{2}\left(T_{1}\cot\frac{\pi}{N}\sin\theta-4I^{2}\right) (26) \displaystyle\qquad+\left(r_{1}^{2}-r_{3}^{2}\right)^{2}\cot\frac{\pi}{N}\Biggr), \displaystyle X_{g} \displaystyle= \displaystyle-T_{1}\cos\theta\sqrt{\left(r_{3}^{2}-r_{1}^{2}\right)^{2}+T_{2}^{2}}. (27) Here, we introduce a binary symbol k_{i}\in\{0,1\} to indicate whether the re-parametrization map \mathbf{g} is applied at the i -th zigzag. Accordingly, we define the switching map \mathbf{g}_{i}^{k_{i}} as \mathbf{g}_{i}^{k_{i}}\left(\left[\theta,I\right]^{T}\right):=\begin{cases}\left[\theta,I\right]^{T}&\mathrm{if}\ \ k_{i}=0,\\ \mathbf{g}\left(\left[\theta,I\right]^{T};l_{i+1,L},l_{i+1,R},N\right)&\mathrm{if}\ \ k_{i}=1.\end{cases} (28) In applying the map \mathbf{g} , certain operations such as the interchange of l_{L} and l_{R} are required. The details of these operations are not essential for the present discussion and are therefore deferred to previous work 7 . Finally, for each zigzag indexed by i , we define the corresponding state transition map \mathbf{M}_{i} as the composition of \mathbf{f}_{i} and \mathbf{g}_{i}^{k_{i}} : \mathbf{M}_{i}:=\mathbf{g}_{i}^{\,k_{i}}\circ\mathbf{f}_{i}\qquad(i=0,\ldots,m-1). (29) The evolution of the state variables (\theta,I) across a ring composed of m zigzags is determined by the composition of a sequence of maps \mathbf{M}_{i} . By defining the global transfer map \mathbf{M} as this composition, the discrete dynamical system that governs the geometric evolution from the n -th ring to the (n+1) -th ring is formulated as: \displaystyle\mathbf{M} \displaystyle:= \displaystyle\mathbf{M}_{m-1}\circ\cdots\circ\mathbf{M}_{0}, (30) \displaystyle\left[\theta_{n+1},I_{n+1}\right]^{T} \displaystyle= \displaystyle\mathbf{M}\left(\left[\theta_{n},I_{n}\right]^{T}\right). (31) It is important to note that this discrete dynamical system is area-preserving, meaning that the map \mathbf{M} preserves the symplectic structure. II.3 Examples of Conservative Discrete Dynamical Systems Following the formulation of the conservative discrete dynamical system in the previous section, we now present two representative examples of module configurations. Shown in Fig. 5 , these examples display distinct connectivity patterns and valencies. In Case (A) (see Fig. 5 ), the module consists of three zigzags ( m=3 ) connected only through type-(A) connectivity (see Fig. 4 ), which implies k_{i}=0 for all i . Consequently, the return map \mathbf{M} is defined as the composition \mathbf{f}_{2}\circ\mathbf{f}_{1}\circ\mathbf{f}_{0} , where each map is given explicitly by \displaystyle\mathbf{f}_{0}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{0,L},l_{0,R},N,l_{1,R},l_{1,M},l_{1,L},\sigma_{0}\right), (32) \displaystyle\mathbf{f}_{1}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{1,L},l_{1,R},N,l_{2,R},l_{2,M},l_{2,L},\sigma_{1}\right), (33) \displaystyle\mathbf{f}_{2}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{2,L},l_{2,R},N,l_{0,R},l_{0,M},l_{0L},\sigma_{2}\right), (34) where \mathbf{x}=[\theta,I]^{T} . In this configuration, the absence of re-parametrization ( \mathbf{g}_{i} ) preserves the six-valent vertex structure throughout the module, maintaining the standard topological connectivity. In contrast, Case (B) (see Fig. 5 ) represents a module with four zigzags ( m=4 ) incorporating type-(B) connectivity (refer to Fig. 4 ). As indicated in Fig. 5 (B), the re-parametrization map \mathbf{g} is applied at the 0-th and 2-nd zigzags ( k_{0}=1,k_{2}=1 ), while it is omitted at the 1-st and 3-rd zigzags ( k_{1}=0,k_{3}=0 ). Consequently, the return map is expressed as \mathbf{M}=\mathbf{f}_{3}\circ(\mathbf{g}_{2}\circ\mathbf{f}_{2})\circ\mathbf{f}_{1}\circ(\mathbf{g}_{0}\circ\mathbf{f}_{0}) , where the constituent maps are defined as follows: \displaystyle\mathbf{f}_{0}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{0,L},l_{0,R},N,l_{1,R},l_{1,M},l_{1,L},\sigma_{0}\right), (35) \displaystyle\mathbf{g}_{0}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{g}\left(\mathbf{x};l_{1,L},l_{1,R},N\right), (36) \displaystyle\mathbf{f}_{1}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{1,R},l_{1,L},N,l_{2,R},l_{2,M},l_{2,L},\sigma_{1}\right), (37) \displaystyle\mathbf{f}_{2}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{2,L},l_{2,R},N,l_{3,R},l_{3,M},l_{3,L},\sigma_{2}\right), (38) \displaystyle\mathbf{g}_{2}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{g}\left(\mathbf{x};l_{3,L},l_{3,R},N\right), (39) \displaystyle\mathbf{f}_{3}(\mathbf{x}) \displaystyle= \displaystyle\mathbf{f}\left(\mathbf{x};l_{3,R},l_{3,L},N,l_{0,R},l_{0,M},l_{0,L},\sigma_{3}\right). (40) This repeated application of the re-parametrization map modifies the topological structure, producing a tessellation with vertices of valence four or eight. II.4 CS Structure and Drift In addition to the conservative systems discussed in the preceding section, the previous study 7 also examines tessellations that allow for similarity expansion. Specifically, this is achieved by introducing a scaling factor s\in\mathbb{R}_{>0} , so that if the crease lengths of the initial zigzag are l_{0,L} and l_{0,R} , the lengths of the final zigzag become sl_{0,L} and sl_{0,R} . However, applying the scaling factor s also scales the domain of the state variables. To construct a consistent dynamical system in which the phase space remains invariant across iterations, the output domain must be aligned with the initial domain. This is accomplished by multiplying the output by 1/s at the final stage of the mapping. As a result, the determinant of the Jacobian matrix of the system becomes 1/s , making it a dissipative system rather than a conservative one. In the context of two-dimensional dynamical systems, a dissipative system with a constant determinant of the Jacobian matrix is known as a CS system. Recent developments in dynamical systems theory have expanded KAM theory to include CS systems 3 . These studies show that by adjusting a constant called the drift parameter \mathbf{\mu} , which offsets the expansion or contraction of phase space, quasi-periodic attractors (invariant curves) with specific frequencies can be identified. In this study, to incorporate the drift term into the module formulation of the previous work, we introduce a virtual fold that explicitly produces this drift effect (see Fig. 6 ). Using numerical calculations, we aim to confirm the existence of these quasi-periodic attractors under the modified formulation. Figure 6: Crease pattern of the extended module designed for the CS system. The pattern includes scaling, in which the length of edges in the (n+1) -th ring is that in the n -th one scaled by a factor s . Additionally, a virtual auxiliary fold parameterized by \mu is inserted to introduce the constant drift term, corresponding to the orange shaded region. The gray shaded region represents the domain of the module. Considering the similar expansion and the drift effect, the modified map \widetilde{\mathbf{M}} is defined as follows. \widetilde{\mathbf{M}}=\bm{\Lambda}\circ\widetilde{\mathbf{M}}_{m-1}\circ\dots\circ\widetilde{\mathbf{M}}_{0}. (41) Each step map \widetilde{\mathbf{M}}_{i} is composed of the three-sphere intersection map \widetilde{\mathbf{f}}_{i} and the connectivity transformation \widetilde{\mathbf{g}}_{i} : \widetilde{\mathbf{M}}_{i}=\widetilde{\mathbf{g}}_{i}^{k_{i}}\circ\widetilde{\mathbf{f}}_{i}, (42) The component maps \tilde{\mathbf{f}}_{i} and \tilde{\mathbf{g}}_{i} are defined to incorporate the scaling factor s only at the final step ( i=m-1 ): \displaystyle\widetilde{\mathbf{f}}_{i}([\theta,I]^{T}) \displaystyle:= \displaystyle\begin{cases}\mathbf{f}_{i}([\theta,I]^{T})\quad\mathrm{if}\ \ i0} as: S(\theta_{n},I_{n+1})=\theta_{n}I_{n+1}+S_{0}(I_{n+1})+\varepsilon S_{1}(I_{n+1},\theta_{n}), (60) where S_{0}(I) determines the integrable dynamics and S_{1} represents the perturbation. In the limit \varepsilon\to 0 , the perturbation disappears, and the system becomes an integrable map: I_{n+1}=I_{n},\quad\theta_{n+1}=\theta_{n}+\frac{dS_{0}}{dI_{n+1}}. (61) Here, the derivative \xi(I)=dS_{0}/dI corresponds to the frequency of the unperturbed system. Now we formally justify identifying the inverse module number as the perturbation parameter, i.e., \varepsilon\sim N^{-1} . The rigorous justification follows directly from the analytical structure of the mapping equations. As indicated in Eqs. ( 16 )–( 27 ), the dependence on the module number N appears exclusively through trigonometric arguments of the form \pi/N or through rotation matrices \mathbf{R}_{X}(2\pi/N) about the X -axis. By defining \varepsilon\equiv 1/N , these functions become analytic with respect to \varepsilon around \varepsilon=0 , which allows for a Taylor series expansion. For example, the rotation matrix can be expanded as \mathbf{R}_{X}(2\pi\varepsilon)=\mathbf{E}+2\pi\varepsilon\mathbf{J}_{X}+O(\varepsilon^{2}), (62) where \mathbf{E} denotes the 3\times 3 identity matrix, and \mathbf{J}_{X} is the generator of infinitesimal rotations about the X -axis, given explicitly by \mathbf{J}_{X}=\begin{pmatrix}0&0&0\\ 0&0&-1\\ 0&1&0\end{pmatrix}. (63) Here, the first-order term naturally scales with N^{-1} . Furthermore, while the map contains terms that appear singular, such as \cot(\pi/N) , these are regularized by the normalization involving \sin(\pi/N) . For instance, the identity \sin(\pi\varepsilon)\cot(\pi\varepsilon)=\cos(\pi\varepsilon)=1-\frac{\pi^{2}}{2}\varepsilon^{2}+O(\varepsilon^{4}) (64) demonstrates that such singularities are eliminated, resulting in expressions that are analytic in \varepsilon . Consequently, the total map \mathbf{M} naturally allows a perturbation expansion of the form \mathbf{M}=\mathbf{M}_{0}+\varepsilon\mathbf{M}_{1}+O(\varepsilon^{2}), (65) where the zeroth-order term \mathbf{M}_{0} exactly recovers the integrable limit derived in Sec. III.1 . This analysis confirms that the inverse module number \varepsilon=1/N functions as a valid perturbation parameter for the subsequent KAM analysis. To apply the KAM theorem, we additionally assume that the nondegeneracy condition \frac{d\xi}{dI}\neq 0 (66) is satisfied. It is important to note that the twist condition is a local requirement with respect to the action variable I and does not assume that \xi(I) is monotonic over the entire phase space. In particular, even if \xi(I) possesses extrema at certain values of I , KAM theory is applicable at other values of I where the nondegeneracy condition d\xi/dI\neq 0 is satisfied. We also assume that \xi(I_{0}) satisfies a Diophantine condition . Since the angular variable \theta is defined on the circle \mathbb{T}^{1}=\mathbb{R}/2\pi\mathbb{Z} , the non-resonance condition must be evaluated modulo 2\pi . Specifically, we require that there exist constants C>0 and \tau>1 such that |k\,\xi(I_{0})-2\pi l|\geq\frac{C}{|k|^{\tau}},\quad\forall k\in\mathbb{Z}\setminus\{0\},\ \forall l\in\mathbb{Z}. (67) Under these assumptions, the KAM theorem guarantees that, for sufficiently small perturbations, the invariant curve corresponding to I=I_{0} persists, carrying quasi-periodic dynamics with frequency \xi(I_{0}) . Conversely, systems in which the frequency profile \xi(I) exhibits extrema are known as nontwist systems . In these systems, the monotonicity of the frequency is disrupted, resulting in different action values on either side of the extremum corresponding to the same frequency. This degeneracy leads to dynamical phenomena distinct from those observed in standard twist maps, such as reconnection and bifurcation of invariant curves near the extremum, often referred to as the shearless curve 4 . In the map investigated in this study, the violation of the twist condition can be readily controlled. As indicated in Eq. ( 50 ), the frequency profile \xi(I) depends on the parameter \sigma within the term B(I;\sigma) . By adjusting \sigma , one can superpose terms with competing signs, thereby inducing local maxima or minima in \xi(I) . As a result, this process transforms the system into a nontwist map. In these discrete dynamical systems, stable elliptical islands generally form at resonances, particularly where the frequency approaches zero ( \xi(I)\approx 0 ). Previous studies examined configurations with at most one stability island, constrained by a frequency profile intersecting the resonance condition only once. We show that modifying the origami parameters enables a more intricate frequency topology, with zeros at multiple action values. A critical challenge in these systems is that, even in nontwist scenarios, the resonance condition \xi(I)=0 may be disrupted by perturbations; the frequency curve can shift away from the zero axis or enter regions where no physically feasible solutions exist. In contrast, by leveraging the nontwist characteristics of the current system and precisely adjusting the positions of frequency extrema, we can ensure multiple stable intersections with the zero-frequency axis. This multiplicity of resonances results in the coexistence of several distinct elliptical islands within the phase space, offering a level of design flexibility not previously observed in tubular origami tessellations. The classical KAM theory guarantees the persistence of invariant curves only in conservative (Hamiltonian) systems. The generalized origami map \widetilde{\mathbf{M}} with similarity expansion (Sec. II.4 ) is dissipative, with constant Jacobian 1/s\neq 1 , so that invariant tori generally break down, leaving isolated periodic or chaotic attractors. Recent extensions of KAM theory to CS systems show that quasi-periodic invariant tori can persist if a drift parameter is adjusted to compensate for contraction or expansion. In our tubular origami model, the auxiliary fold parameter \mu in Eq. ( 43 ) serves as this drift. Thus, for sufficiently small perturbations (large N ), stable quasi-periodic attractors are expected for appropriate values of \mu , providing a theoretical basis for the numerical results presented in the next section. III.3 The Generating Function and Variational Structure The dynamic system governed by the map \mathbf{M} (without expansion) is conservative. For symplectic mappings, a generating function exists locally. Although obtaining an explicit expression in the general case is analytically infeasible due to the map’s algebraic complexity, we have identified the generating function in the integrable limit. Importantly, this function can be interpreted as the total discrete mean curvature. In this section, we present the derivation and analysis of this variational structure. Since the total frequency \xi(I) is constructed as a linear sum of the phase shifts contributed by individual zigzags (as shown in Eq. ( 56 )), the total generating function S_{0}(I) naturally decomposes into a sum of local generating functions associated with each folding step. Therefore, it is sufficient to focus our analysis on the generating function S_{f}(I) corresponding to a single folding map \mathbf{f} . Using the definition \xi_{f}=\operatorname{arctan2}(B,A) , the function S_{f}(I) is derived via integration by parts: \displaystyle S_{f}(I) \displaystyle= \displaystyle\int\xi_{f}(I)\,dI=I\xi_{f}-\int I\frac{d\xi_{f}}{dI}\,dI. (68) We define the integrand of the second term as \psi(I):=I(d\xi_{f}/dI) . Using the explicit form of the derivative, \psi(I) can be written in terms of a rational function R(I) as: \psi(I)=\frac{I(B^{\prime}A-A^{\prime}B)}{A^{2}+B^{2}}=\frac{\sigma}{\beta\sqrt{\gamma}}R(I). (69) (See Appendix A for the detailed algebraic derivation). The integrability of the term \psi(I) is strictly governed by the algebraic structure of the denominator, specifically the irrational factor \beta\sqrt{\gamma} . Let P(I) denote the polynomial inside the square root appearing in this factor. According to the classical theory of integration 19 , the nature of the primitive function is determined by the degree of P(I) , denoted by d=\deg(P) . If d\leq 2 , the integral can be evaluated explicitly using elementary functions, typically involving inverse trigonometric or logarithmic. However, if d=3 or d=4 , the integral generally cannot be expressed in terms of elementary functions and is classified elliptic integrals . For d\geq 5 , the problem involves hyperelliptic integrals , which represent a higher-complexity class of transcendental functions. In the present origami system, the degree d is directly dictated by the geometric symmetry of the module. As detailed in Appendix A.2 , an analysis of the explicit form of P(I) reveals that the integrability class bifurcates depending on the relationship between the left and right crease lengths. In the general asymmetric case ( l_{L}\neq l_{R} ), the polynomial is found to be of degree d=4 , implying that the generating function is intrinsically non-elementary and is described by elliptic integrals. In contrast, when the module possesses symmetry ( l_{L}=l_{R} ), the algebraic structure simplifies significantly; the coefficients of the higher-order terms vanish, reducing the polynomial to degree d=2 . Consequently, in this symmetric case, the variational structure can be expressed entirely in terms of elementary functions. In this study, we specifically focus on this symmetric configuration to derive an explicit analytical representation of the generating function. Relegating the detailed integration steps to Appendix A.3 , the integral of \psi(I) for the symmetric case (where l_{L}=l_{R}=l and r_{1}=r_{3} ) yields the following explicit closed-form expression: -\int\psi(I)dI=l\Phi_{l}+r_{1}\Phi_{r_{1}}+r_{2}\frac{\Phi_{r_{2}}}{2}+\mathrm{Const.}, (70) where \Phi_{l},\Phi_{r_{1}}, and \Phi_{r_{2}} represent the exterior dihedral angles associated with the crease lengths l,r_{1}, and r_{2} , respectively. Finally, substituting Eq. ( 70 ) back into the expression derived via integration by parts, we obtain the total generating function S_{f}(I) : S_{f}(I)=\frac{1}{2}\left(2I\xi_{f}+2l\Phi_{l}+2r_{1}\Phi_{r_{1}}+r_{2}\Phi_{r_{2}}\right)+\mathrm{Const.} (71) In this expression, the first term I\xi_{f} represents half the product of the crease length 2I and its associated exterior dihedral angle \xi_{f} (see Appendix A.4 ). Consequently, the generating function S_{f}(I) corresponds to half the sum of the products of the lengths and the exterior dihedral angles of all edges forming the tetrahedron U_{1}U_{2}U_{3}-V_{\sigma} (as shown in Fig. 3 ). From the perspective of discrete differential geometry, this quantity is identified as the total discrete mean curvature H of the discrete surface, defined as follows 2 : H=\frac{1}{2}\sum_{j\in\mathcal{E}}l_{j}\Phi_{j}, (72) where the summation extends over all edges j\in\mathcal{E} of the polyhedron, with l_{j} denoting the edge length and \Phi_{j} representing the corresponding exterior dihedral angle. This formula is the standard definition of total mean curvature for polyhedral surfaces in discrete differential geometry. Notably, this discrete quantity corresponds to the integral of mean curvature over a smooth surface, denoted as \int H\,dA . This relationship establishes a fundamental geometric law: the conserved quantity governing the integrable dynamics of tubular origami is the total discrete mean curvature. Synthesizing the results derived above, we extend this local formulation to the entire module structure. The total generating function S_{0}(I) is obtained by summing the contributions from both the folding maps \mathbf{f}_{i} and the re-parametrization maps \mathbf{g}_{i} . Recalling that the map \mathbf{g} acts as a pure phase shift of \pi in the continuum limit (i.e., \xi_{g}=\pi ), its generating function is given by the linear term S_{g,i}(I)=k_{i}\pi I , where k_{i}\in\{0,1\} is the connectivity index. Consequently, the total generating function takes the form: S_{0}(I)=\sum_{i=0}^{m-1}S_{f,i}(I)+\sum_{i=0}^{m-1}k_{i}\pi I=H_{\mathrm{module}}(I) (73) where H_{\mathrm{module}}(I) is the total discrete mean curvature in one module. Using the generating function S(\theta_{n},I_{n+1}) derived above, we define the discrete action functional \mathcal{A} for a sequence of states \{(\theta_{n},I_{n})\}_{n=0}^{M} as follows: \mathcal{A}=\sum_{n=0}^{M-1}\left(I_{n+1}\theta_{n+1}-S(\theta_{n},I_{n+1})\right) (74) Figure 7: Representative classifications of constant mean curvature (CMC) surfaces. These surfaces are obtained as solutions to the variational problem of maximizing volume subject to a constant surface area. When rotational symmetry is imposed, these CMC surfaces are known as Delaunay surfaces. Examples include: (A) Unduloid, a smooth continuous surface; (B) Nodoid, which exhibits self-intersections, along with its cross-section; (C) Catenoid, the limiting shape where the mean curvature becomes zero. The trajectory of the folding dynamics is uniquely determined by the principle of stationary action, \delta\mathcal{A}=0 , subject to fixed boundary conditions. When we explicitly compute the action \mathcal{A} , the terms involving \theta_{n} and \theta_{n+1} vanish, leaving only a function of I (specifically, all discrete mean curvature terms except those associated with the edge I ): \mathcal{A}=\sum_{n=0}^{M-1}\left(S_{0}(I_{n+1})-I_{n+1}\xi(I_{n+1})\right). (75) This is equivalent to considering the generating function as S(I_{n},I_{n+1}) ; however, since we are now dealing with an integrable system (I_{n}=I_{n+1}) , rewriting it in this form requires a recomputation. If we proceed in this way, the corresponding expression of the variational principle becomes \frac{\partial S(I_{n-1},I_{n})}{\partial I_{n}}=-\frac{\partial S(I_{n},I_{n+1})}{\partial I_{n}}, (76) and represents an equation that relates to the discrete mean curvature between adjacent modules. In the theory of continuous surfaces, constant mean curvature (CMC) surfaces 10 , as illustrated in Fig. 7 , emerge as solutions to variational problems concerning surface area and volume. The result obtained in Eq. ( 76 ) can be interpreted as an equation expressing the local balance of mean curvature on a discrete surface. This result is considered to have a direct correspondence with the condition for locally constant mean curvature in continuous systems. IV NUMERICAL EXPERIMENTS Based on the theoretical analysis in Sec. III , we conduct numerical experiments to verify the dynamical behavior of the system. We aim to confirm the existence of invariant curves (KAM tori) for sufficiently large N in both symplectic and CS regimes. To enhance understanding of the dynamics, we visualize the corresponding 3D origami structures for representative trajectories in phase space. During numerical iterations, there are instances where no solution satisfies the geometric constraint; specifically, when the intersection of three spheres at a crease vertex yields no solution. We refer to these cases as finite solutions . In phase diagrams, any trajectory that reaches a finite solution is terminated and therefore omitted from the plot. In addition, we treat as finite solutions those trajectories that pass through the singular point I=0 , namely, cases in which the vertices U_{1} and U_{3} interchange. IV.1 KAM Tori in Symplectic Dynamical Systems We performed numerical experiments on symplectic dynamical systems governed by the mappings \mathbf{M}=\mathbf{f}_{3}\circ\mathbf{f}_{2}\circ\mathbf{f}_{1} and \mathbf{M}=\mathbf{f}_{3}\circ(\mathbf{g}_{2}\circ\mathbf{f}_{2})\circ\mathbf{f}_{1}\circ(\mathbf{g}_{0}\circ\mathbf{f}_{0}) , which correspond to the origami modules shown in Fig. 5 . As discussed in Sec. III.2 , by appropriately tuning the geometric parameters, these systems can be designed to realize both twist systems, in which the frequency function \xi(I) is monotonic, and nontwist systems, in which \xi(I) exhibits local extrema. Although candidate parameter sets can be identified numerically from the profile of \xi(I) , inappropriate choices of edge lengths may result in self-intersections or geometric collapse. Therefore, throughout this study, we selected parameters that ensure physically admissible, non-self-intersecting origami configurations near elliptic fixed points. Figure 8: Numerical profile of the frequency function \xi(I) for the basic module. The solid curve represents the theoretical value of \xi(I) . The function is strictly monotonic ( d\xi/dI<0 ) over the entire valid domain, indicating that the twist condition is satisfied. The blue dash-dotted line marks the location where \xi(I)=0 , at I\approx 0.2572 . We first present numerical results for the twist system characterized by a monotonic frequency, as shown in Fig. 8 . The corresponding phase diagrams are displayed in Fig. 10 . Our results demonstrate that as the number of modules N increases, the phase space becomes densely filled with invariant curves. For sufficiently large N , these invariant curves remain, although they are slightly deformed from the integrable limit. This behavior supports the global stability properties predicted by the KAM theorem. A closer inspection of Fig. 10 reveals a strong correspondence between the phase-space structure and the theoretical frequency profile. For large module numbers, such as N=300 and 3000 , the center of the primary elliptic island is located at I\approx 0.2572 , in excellent agreement with the zero-frequency condition \xi(I)=0 predicted by the theoretical curve in Fig. 8 . For smaller values of N , where the discrete system experiences stronger perturbative effects, the fixed-point shifts slightly away from this theoretical value; nevertheless, it remains near the predicted location. More fundamentally, in this origami-based system, physically realizable foldable regions correspond predominantly to neighborhoods of vanishing frequency. This observation provides a clear design principle: by tuning the geometric parameters to control the profile of \xi(I) , one can effectively engineer the location of stable, foldable domains in phase space. We further examine origami configurations associated with several representative trajectories. Trajectories lying on elliptic quasi-periodic orbits, shown in Fig. 10 (A) and (C), do not exhibit geometric failures such as self-intersections and are therefore physically foldable in real space. However, we find that even elliptic quasi-periodic orbits that are commonly regarded as belonging to foldable regions may give rise to self-intersections, as illustrated in Fig. 10 (D). In contrast, the origami configuration corresponding to an invariant curve (Fig. 10 (B)) clearly exhibits self-intersection. Although this trajectory appears chaotic due to perturbative effects, it in fact retains quasi-periodic motion. For stronger perturbations, such as in the case N=10 , the invariant curve disappears altogether, indicating that the perturbed trajectory is driven into a region where physically admissible geometric solutions no longer exist. Figure 9: Theoretical profile of the frequency function \xi(I) for the nontwist case. In contrast to the twist system, \xi(I) is non-monotonic and exhibits local extrema (shearless points) at I_{1}^{*}\approx 0.5257 and I_{2}^{*}\approx 0.8087 , indicating a violation of the global twist condition. The profile clearly intersects the zero-frequency axis at two actions, I_{1}\approx 0.2958 and I_{2}\approx 0.7430 . The curve terminates at the geometric limit I_{\text{limit}}\approx 0.8091 just after the second shearless point. Although a third intersection is absent in this theoretical limit, the proximity of the curve to \xi=0 near the boundary allows for the emergence of a third island structure under finite- N perturbations. Next, we consider the nontwist case in which \xi(I) exhibits local extrema, as shown in Fig. 9 . The corresponding numerical results are presented in Fig. 11 . As in the twist case, the phase space becomes increasingly populated with invariant curves as N increases.In this specific configuration, the theoretical frequency profile \xi(I) admits two roots, I_{1}\approx 0.2958 and I_{2}\approx 0.7430 , where \xi(I)=0 , corresponding to the two primary elliptic islands observed in the phase space. Notably, the profile terminates at the geometric limit I_{\text{limit}}\approx 0.8091 immediately after the second shearless point. While the theoretical curve does not strictly intersect the zero-axis a third time, it remains in extreme proximity to \xi=0 at this boundary.As a result, the topological instability associated with the reconnection phenomenon near the shearless region, coupled with finite- N perturbations, allows for the emergence of a third, albeit marginal, stable region at the edge of the phase space. Furthermore, in Numerical Experiment 2, where the map is constructed from a longer sequence of compositions, the impact of non-linearity is significantly amplified. With the increased complexity of the mapping, the cumulative perturbative effects become much stronger than in the simpler cases. As a result, at specific I values of the zero profile the center of the stable region deviates significantly from the theoretical prediction. Indeed, numerical results confirm that the minute elliptic island observed in Fig. 11 (C) corresponds to this value I_{3} ; it is barely discernible in the phase diagram as a result of these combined effects. Figure 10: Phase diagrams of the mapping \mathbf{M}=\mathbf{f}_{2}\circ\mathbf{f}_{1}\circ\mathbf{f}_{0} , computed for module numbers N=10,33,100,300,3000 , and 500000 . Orbits corresponding to different initial conditions are plotted in different colors. For selected trajectories, the initial point (\theta_{0},I_{0}) is indicated by a circle marker ( \circ ), while points belonging to the first and second periods are marked by triangles ( \triangle ) and squares ( \square ), respectively. The lower panels show the corresponding three-dimensional reconstructed origami configurations. The geometric parameters are set to (\sigma_{0},\sigma_{1},\sigma_{2})=(M,M,M) , and the edge lengths (l_{i,L},l_{i,M},l_{i,R}) for steps i=0,1,2 are fixed at (0.75,0.69,0.75) , (1.11,0.58,1.11) , and (0.90,1.49,0.90) , respectively. Figure 11: Phase diagrams of the mapping \mathbf{M}=\mathbf{f}_{3}\circ(\mathbf{g}_{2}\circ\mathbf{f}_{2})\circ\mathbf{f}_{1}\circ(\mathbf{g}_{0}\circ\mathbf{f}_{0}) , computed for module numbers N=20,150,287,500,5000 , and 500000 . Orbits corresponding to different initial conditions are plotted in different colors. The initial point (\theta_{0},I_{0}) is indicated by a circle marker ( \circ ), while points belonging to the first and second periods are denoted by triangles ( \triangle ) and squares ( \square ), respectively. The lower panels show the corresponding three-dimensional reconstructed origami configurations. The geometric parameters are set to (\sigma_{0},\sigma_{1},\sigma_{2},\sigma_{3})=(V,V,M,M) , and the edge lengths (l_{i,L},l_{i,M},l_{i,R}) for steps i=0,1,2,3 are fixed at (0.8552,0.9913,0.9748) , (1.1342,1.1798,1.0774) , (1.1932,0.9922,0.8522) , and (0.9105,0.9236,1.0664) , respectively. Figure 12: Phase diagrams of the conformally symplectic mapping \widetilde{\mathbf{M}}=\bm{\Lambda}\circ\mathbf{f}_{2}\circ\mathbf{f}_{1}\circ\mathbf{f}_{0} , computed for various module numbers N . Different orbits are plotted in distinct colors. For each trajectory, the initial point (\theta_{0},I_{0}) is marked by a green circle ( \circ ), and subsequent iterations are denoted by diamonds ( \diamond ). The system exhibits two distinct types of attractors: a point attractor, indicated by a star marker ( \star ) with its basin of attraction shaded in light blue, and a quasi-periodic attractor, represented by a solid red line with its basin shaded in orange. Background streamlines visualize the flow direction of the dynamics. The gray regions correspond to domains where trajectories eventually terminate (finite solutions) due to geometric constraints, while the white regions represent areas where the map is immediately undefined. The geometric parameters are set to (\sigma_{0},\sigma_{1},\sigma_{2})=(M,M,M) , and the edge lengths (l_{i,L},l_{i,M},l_{i,R}) for steps i=0,1,2 are fixed at (1.0,0.91,1.0) , (\sqrt{2},0.91,\sqrt{2}) , and (\sqrt{2},1.91,\sqrt{2}) , respectively. We also examine the origami configurations associated with the invariant curves shown in Figs. 11 (D) and (E). As in the twist regime, such trajectories generally correspond to configurations exhibiting self-intersections. However, the case shown in Fig. 11 (D) constitutes a notable exception. Although the global trajectory involves self-intersection, we find that over a single period this solution yields a physically constructible toroidal shape without self-intersection. From a dynamic perspective, this orbit can be identified as a meandering invariant curve , a structure unique to nontwist systems 4 . Its undulated geometry indicates that the trajectory is strongly influenced by the topological constraints imposed by the pair of elliptic islands located on either side. Furthermore, Figs. 11 (A) and (B) show origami configurations corresponding to orbits within this pair of elliptic islands. These two islands create contrasting geometric configurations that exhibit a striking geometric duality. The structure in Fig. 11 (A) features a deeply indented, concave neck, resulting in a smooth, bulbous form. In contrast, the structure in Fig. 11 (B) is characterized by sharp, outward-pointing cusps. The smooth indentation of the former is thus geometrically inverted into the singular protrusion of the latter. This correspondence suggests that the nontwist bifurcation effectively separates the dynamics into two distinct folding modes, which may be described as “concave” and “convex.” IV.2 A KAM Attractor in the CS Dynamical Systems Finally, we analyze the existence of quasi-periodic attractors predicted by KAM theory for CS systems. Numerical simulations confirm the presence of such attractors, and the results for the mapping \widetilde{\mathbf{M}}=\bm{\Lambda}\circ\mathbf{f}_{2}\circ\mathbf{f}_{1}\circ\mathbf{f}_{0} are summarized in Fig. 12 . Figure 12 (A) presents the results for the case with zero drift ( \mu=0 ). Under this condition, we observe that the physically valid phase space is progressively annihilated as the module number N increases. Eventually, for sufficiently large N , the system becomes dominated by the region of finite solutions (gray area), indicating that no physically realizable folded configurations persist. This collapse can be understood by considering the integrable limit: as N\to\infty , the dynamics approaches a continuous integrable system where dissipation drives all trajectories toward the trivial attractor located at I=0 . However, since the state I=0 corresponds to a geometric singularity (finite solution) in this origami model, trajectories inevitably hit the boundary of the admissible domain and terminate. In contrast, introducing a small drift term ( \mu=0.05 , Fig. 12 (B)) leads to a qualitative change in the phase-space structure. The drift term shifts the attractor away from the singular origin ( I=0 ) to a location with a finite, non-zero action value. Consequently, a stable quasi-periodic attractor, which we refer to as a KAM attractor , emerges within the physically valid domain. This result demonstrates that appropriate tuning of the drift parameter is essential for realizing robust origami structures in the presence of dissipation. Furthermore, by examining the evolution of the basins of attraction with increasing N , we identify a significant dynamical transition. As N increases, the location of the point attractor gradually approaches the basin of the quasi-periodic attractor and eventually disappears. This behavior suggests that, in the continuum limit, the static equilibrium loses its distinct basin of attraction, leaving the quasi-periodic mode as the dominant stable state. Finally, we must address the geometric validity of the resulting structures. As in the symplectic case, the origami configurations corresponding to the KAM attractor are likely to exhibit self-intersections. Therefore, for physical fabrication, we recommend using fewer modules N . In this regime, although the system experiences stronger discrete perturbations, the lack of dense invariant curves facilitates the construction of tangible origami models. V CONCLUSION In this study, we identified the inverse number of modules, N^{-1} , as a perturbation parameter and analyzed the dynamics resulting from tubular origami tessellations within the framework of KAM theory, providing a unified analytical description of the system. Numerical experiments confirmed that the phase space is densely foliated by invariant curves, indicating that the system maintains the structure of an integrable system when the perturbation is sufficiently small. Specifically, analysis of the frequency \xi in the integrable limit proved effective for determining qualitative properties of the system, such as whether it exhibits twist or nontwist behavior, as well as for controlling the locations of stable folding configurations corresponding to elliptic fixed points. A central theoretical contribution of this work is the clarification of the geometric origin of the symplectic structure. We demonstrated that, in the integrable limit, the generating function of the system is determined by the total discrete mean curvature of the origami modules. This indicates that the symplectic (area-preserving) property of the map results directly from a variational principle governed by this fundamental geometric quantity. Moreover, we propose that this relationship is not limited to the integrable limit but also applies to more general systems with perturbations, where the generating function can still be described by quantities related to the total discrete mean curvature. Notably, there is a strong resemblance between the surfaces formed by the origami tessellations studied here and CMC surfaces such as Delaunay surfaces 10 . Numerical results demonstrate that even under finite- N perturbations, the resulting origami configurations retain the distinct geometric characteristics of CMC surfaces. This persistence suggests that the curvature-based structure of the generating function remains robust even in the presence of perturbations. An important direction for future research is to extend the present analysis of the generating function, which was derived explicitly for symmetric crease configurations, to more general asymmetric geometries. In asymmetric systems, the variational structure is described using elliptic integrals, making its geometric interpretation analytically challenging. It remains an open question whether the correspondence between the generating function and curvature-based geometric quantities persists under perturbations, and how the integrable structure deforms in such generalized settings. Furthermore, applying the insights from KAM theory obtained in this study to explore the design of infinite chaotic solutions is an important direction for future research. In the present system, there exist regions where solutions break down due to geometric constraints, resulting in finite solutions. Because typical chaotic orbits eventually enter these regions, the continuity of the folding dynamics is lost. However, by utilizing invariant curves as effective transport barriers in phase space, chaotic orbits can be confined within geometrically valid regions. This approach enables the design of infinitely continuous, non-periodic folded states while avoiding geometric failure. Exploiting the global structure of phase space to create origami tessellations corresponding to these chaotic solutions will provide deeper insights into the dynamical behavior of these systems. Furthermore, the appearance of twist and nontwist behavior, along with CS structures resulting from the geometric degrees of freedom in origami, is expected to be a universal characteristic common to a wide range of origami-based dynamical systems, not limited to tubular origami. The integrable systems approach developed in this study offers new insights into the mathematical structures underlying complex origami dynamics and provides a promising theoretical foundation for future developments in origami engineering and metamaterial design. Acknowledgements. M. S. was partially supported by JSPS KAKENHI Grant Number 23K25778. We would like to thank Rinki Imada and Tomohiro Tachi, whose prior work on tubular origami tessellations informed this research, for providing the opportunity to discuss this study and for their valuable insights. Data Availability Statement The data that support the findings of this study are available from the corresponding authors upon reasonable request. Appendix A Appendix A: Analytical Derivation of the Generating Function In this appendix, we provide a detailed algebraic derivation of the generating function S_{f}(I) introduced in Sec. III.3 . The central task is the explicit evaluation of the integral term arising from the integration by parts. Substituting the geometric expressions for A(I) and B(I) , the integrand \psi(I) defined in Eq. ( 69 ) takes the form \psi(I)=\frac{I(B^{\prime}A-A^{\prime}B)}{A^{2}+B^{2}}=\frac{\sigma}{\beta\sqrt{\gamma}}\,R(I), where R(I) is a rational function of the action variable I . A.1 Decomposition into Rational and Irrational Components First, we express the integrand \psi(I) explicitly in terms of the geometric parameters to separate its rational and irrational components. Observing the factor I/(A^{2}+B^{2}) , it is evident that this term is a rational function of I . Consequently, the algebraic nature of the integrand is determined by the term B^{\prime}A-A^{\prime}B . Recalling the definitions of A(I) and B(I) given in Eq. ( 48 ), these functions and their derivatives can be written as \displaystyle A \displaystyle=\frac{R_{A}(I)}{\beta},\qquad A^{\prime}=\frac{R_{A^{\prime}}(I)}{\beta}, (77) \displaystyle B \displaystyle=\sigma\sqrt{\gamma},\qquad B^{\prime}=\frac{\sigma\gamma^{\prime}}{2\sqrt{\gamma}}, (78) where R_{A}(I) and R_{A^{\prime}}(I) are rational functions given by \displaystyle R_{A}(I) \displaystyle= \displaystyle-e_{1}\beta^{2}+\alpha\frac{r_{1}^{2}-r_{3}^{2}+4I^{2}-4Ie_{1}\alpha}{4I}, (79) \displaystyle R_{A^{\prime}}(I) \displaystyle= \displaystyle\frac{1}{\beta^{2}}\left(R_{A}^{\prime}(I)+R_{A}(I)\frac{\alpha\alpha^{\prime}}{\beta^{2}}\right). (80) Substituting these expressions into the preceding term yields B^{\prime}A-A^{\prime}B=\frac{\sigma}{\beta\sqrt{\gamma}}\left(\frac{\gamma^{\prime}}{2}R_{A}-\gamma R_{A^{\prime}}\right). (81) Finally, by introducing the collective rational function R(I)=\frac{I}{A^{2}+B^{2}}\left(\frac{\gamma^{\prime}}{2}R_{A}(I)-\gamma R_{A^{\prime}}(I)\right), (82) we recover the factorized form given in Eq. ( 69 ), in which the irrational dependence is entirely captured by the factor 1/(\beta\sqrt{\gamma}) . A.2 Bifurcation of Integrability via the Degree of the Polynomial Having isolated the rational component of the integrand, the analytic nature of the primitive function is entirely determined by the irrational denominator \beta\sqrt{\gamma} . By substituting the explicit geometric expressions for \beta and \gamma and simplifying the resulting algebraic structure, we find that this term reduces to the square root of a polynomial P(I) , normalized by a factor proportional to the action variable I : \beta\sqrt{\gamma}=\sqrt{\beta^{2}\gamma}=\frac{\sqrt{P(I)}}{8Il_{L}^{2}}. (83) Here, P(I)=p_{0}+p_{1}+p_{2} is a polynomial in I , whose coefficients are fully determined by the geometric parameters of the module. The individual terms p_{j}\ (j=0,1,2) are given explicitly as follows: \displaystyle p_{0} \displaystyle= \displaystyle 4l_{L}^{2}r_{1}^{2}\left(16I^{2}l_{L}^{2}-\left(4I^{2}+l_{L}^{2}-l_{R}^{2}\right)^{2}\right), (84) \displaystyle p_{1} \displaystyle= \displaystyle\left(-16I^{2}l_{L}^{2}+\left(4I^{2}+l_{L}^{2}-l_{R}^{2}\right)^{2}\right)\left(l_{L}^{2}+r_{1}^{2}-r_{2}^{2}\right)^{2}, (85) \displaystyle p_{2} \displaystyle= \displaystyle-\bigg(2l_{L}^{2}\left(4I^{2}+r_{1}^{2}-r_{3}^{2}\right) (86) \displaystyle\quad-\left(4I^{2}+l_{L}^{2}-l_{R}^{2}\right)\left(l_{L}^{2}+r_{1}^{2}-r_{2}^{2}\right)\bigg)^{2}. From the explicit form of P(I) , it follows that in the general asymmetric configuration ( l_{L}\neq l_{R} and r_{1}\neq r_{3} ), the highest-order terms in I do not cancel. Consequently, the polynomial P(I) is of degree four (quartic), implying that the primitive function associated with \psi(I) belongs to the class of elliptic integrals. In contrast, for the symmetric configuration ( l_{L}=l_{R}=l and r_{1}=r_{3} ), the algebraic structure simplifies drastically. In this case, the polynomial P(I) factorizes, allowing the cancellation of the term I in the denominator. Consequently, the irrational factor reduces to the following form: \beta\sqrt{\gamma}=\frac{\sqrt{K_{1}-K_{2}I^{2}}}{2l}, (87) where the constants K_{1} and K_{2} depend solely on the geometric parameters and are given by: \displaystyle K_{1} \displaystyle= \displaystyle-l^{4}+2l^{2}(r_{1}^{2}+r_{2}^{2})-(r_{1}^{2}-r_{2}^{2})^{2}, (88) \displaystyle K_{2} \displaystyle= \displaystyle 4r_{2}^{2}. (89) As a result, the term inside the square root becomes a quadratic function of I . This reduction in degree ensures that the integral of \psi(I) can be evaluated explicitly in terms of elementary functions. A.3 Explicit Form of the Integration Result As shown in the previous subsection, imposing the symmetry conditions ( l_{L}=l_{R}=l and r_{1}=r_{3} ) reduces the integrand \psi(I) to a form whose primitive can be expressed in terms of elementary functions. We briefly summarize the evaluation of this integral. Introducing the substitution I=K\sin\rho,\qquad K=\sqrt{\frac{K_{1}}{K_{2}}}, (90) followed by the Weierstrass substitution t=\tan\left(\frac{\rho}{2}\right), (91) the integral simplifies to a rational function of t . Specifically, one obtains \int\psi(I)\,dI=\frac{\sigma l}{r_{2}}\int R\!\left(\frac{2Kt}{1+t^{2}}\right)\frac{2}{1+t^{2}}\,dt, (92) where R(I) is the rational function defined in Eq. ( 82 ). The resulting integral can be evaluated by standard partial fraction decomposition. Conducting the decomposition explicitly, the integrand can be organized into three characteristic contributions associated with the geometric parameters l , r_{1} , and r_{2} , respectively: \displaystyle\int\psi(I)\,dI= (93) \displaystyle= \displaystyle\frac{\sigma l}{r_{2}}\int\frac{4K^{2}t^{2}\left(8K^{2}r_{2}^{2}t^{2}+(t^{2}+1)^{2}\left(l^{4}-2l^{2}r_{1}^{2}-l^{2}r_{2}^{2}+r_{1}^{4}-r_{1}^{2}r_{2}^{2}\right)\right)}{l(t^{2}+1)\left(16K^{4}t^{4}-4K^{2}t^{2}(l^{2}+r_{1}^{2})(t^{2}+1)^{2}+l^{2}r_{1}^{2}(t^{2}+1)^{4}\right)}\ dt, \displaystyle= \displaystyle\frac{\sigma l}{r_{2}}\int\Biggl(\frac{\left(-l^{2}+r_{1}^{2}-r_{2}^{2}\right)}{2\left(2Kt+lt^{2}+l\right)}+\frac{\left(-l^{2}+r_{1}^{2}-r_{2}^{2}\right)}{2\left(-2Kt+lt^{2}+l\right)}-\frac{r_{1}\left(-l^{2}+r_{1}^{2}+r_{2}^{2}\right)}{2l\left(2Kt+r_{1}t^{2}+r_{1}\right)}-\frac{r_{1}\left(-l^{2}+r_{1}^{2}+r_{2}^{2}\right)}{2l\left(-2Kt+r_{1}t^{2}+r_{1}\right)}+\frac{2r_{2}^{2}}{l\left(t^{2}+1\right)}\Biggr)\ dt, \displaystyle= \displaystyle\frac{\sigma l}{r_{2}}\Bigg(\frac{-l^{2}+r_{1}^{2}-r_{2}^{2}}{2\sqrt{l^{2}-K^{2}}}\left(\tan^{-1}\left(\frac{lt+K}{\sqrt{l^{2}-K^{2}}}\right)+\tan^{-1}\left(\frac{lt-K}{\sqrt{l^{2}-K^{2}}}\right)\right) \displaystyle\qquad\qquad-\frac{r_{1}}{l}\frac{-l^{2}+r_{1}^{2}+r_{2}^{2}}{2\sqrt{r_{1}^{2}-K^{2}}}\left(\tan^{-1}\left(\frac{r_{1}t+K}{\sqrt{r_{1}^{2}-K^{2}}}\right)+\tan^{-1}\left(\frac{r_{1}t-K}{\sqrt{r_{1}^{2}-K^{2}}}\right)\right)+\frac{2r_{2}^{2}}{l}\tan^{-1}t\Bigg)+\mathrm{Const}. Although the integrated expression in Eq. ( 93 ) appears algebraically complex, it can be significantly simplified by considering the geometric interpretation of each term. Figure 13: Geometric interpretation of the auxiliary parameter K and the partial angles on the polyhedral faces. The constant K represents the altitude of the triangle with base r_{2} , while \phi_{l} and \phi_{r_{1}} denote the angles obtained from the transformation of the inverse tangent terms. By invoking the Law of Cosines and Heron’s formula , the coefficient K introduced in the variable transformation is identified as the altitude of the triangle U_{3}U_{2}V_{\sigma} with respect to the base r_{2} (see Fig. 13 ). Furthermore, by defining the auxiliary angles \phi_{l} and \phi_{r_{1}} as depicted in the figure, the integrated expression allows for a significant simplification. Specifically, the coefficients reduce to: \displaystyle\frac{-l^{2}+r_{1}^{2}-r_{2}^{2}}{2\sqrt{l^{2}-K^{2}}} \displaystyle= \displaystyle-r_{2}, (94) \displaystyle-\frac{r_{1}}{l}\frac{-l^{2}+r_{1}^{2}+r_{2}^{2}}{2\sqrt{r_{1}^{2}-K^{2}}} \displaystyle= \displaystyle-\frac{r_{1}r_{2}}{l}, (95) and the inverse trigonometric terms are rewritten using the addition formulas as: \displaystyle\Theta_{l} \displaystyle:= \displaystyle\tan^{-1}\left(\frac{lt+K}{\sqrt{l^{2}-K^{2}}}\right)+\tan^{-1}\left(\frac{lt-K}{\sqrt{l^{2}-K^{2}}}\right) (96) \displaystyle= \displaystyle\tan^{-1}\left(\frac{2t}{1-t^{2}}\cos\phi_{l}\right), \displaystyle\Theta_{r_{1}} \displaystyle:= \displaystyle\tan^{-1}\left(\frac{r_{1}t+K}{\sqrt{r_{1}^{2}-K^{2}}}\right)+\tan^{-1}\left(\frac{r_{1}t-K}{\sqrt{r_{1}^{2}-K^{2}}}\right) (97) \displaystyle= \displaystyle\tan^{-1}\left(\frac{2t}{1-t^{2}}\cos\phi_{r_{1}}\right). Recalling the definition of the Weierstrass substitution t=\tan(\phi/2) , we identify the rational term involving t as the tangent of the angle \rho : \frac{2t}{1-t^{2}}=\tan\rho. (98) Consequently, all algebraic complexity reduces to a notably simple geometric form: -\int\psi(I)\,dI=\sigma\left(l\Theta_{l}+r_{1}\Theta_{r_{1}}-r_{2}\rho\right)+\mathrm{Const.} (99) A.4 Geometric Interpretation of the Generating Function Combining the explicit integration result of \psi(I) derived in the previous section, we now give a geometric interpretation of the generating function S_{f} (Eq. ( 68 )). We first clarify the meaning of \xi(I) , which is defined through the auxiliary functions A(I) and B(I) (see Eqs. ( 48 )). Following the model setup in Sec. II , we introduce a local coordinate system (\mathbf{e}_{1},\mathbf{e}_{2},\mathbf{e}_{3}) centered at the vertex U_{1} (Fig. 14 ). Figure 14: Projection geometry defining A(I) and B(I) . V_{\mathrm{proj}} denotes the orthogonal projection of V_{\sigma} onto the plane U_{1}U_{2}U_{3} . In this frame, B(I) is the \mathbf{e}_{3} component and represents the signed perpendicular distance from V_{\sigma} to the plane U_{1}U_{2}U_{3} . Let V_{\mathrm{proj}} have coordinates [e_{1},e_{2}]^{T} in the (\mathbf{e}_{1},\mathbf{e}_{2}) basis. With \alpha=\cos\angle U_{2}U_{1}U_{3} and \beta=\sin\angle U_{2}U_{1}U_{3} , we obtain \begin{bmatrix}\alpha&\beta\\ -\beta&\alpha\end{bmatrix}\begin{bmatrix}e_{1}\\ e_{2}\end{bmatrix}=\begin{bmatrix}\cdots\\ A(I)\end{bmatrix}. (100) This rotation aligns \mathbf{e}_{1} with the edge U_{1}U_{3} . Hence, A(I) corresponds (up to sign) to the transverse component in the rotated frame. Together, A(I) and B(I) define the exterior dihedral angle \xi(I) associated with the edge U_{1}U_{3} . We now interpret the angular variables \Theta_{l} , \Theta_{r_{1}} , and \rho associated with the edges l , r_{1} , and r_{2} , respectively. The substitution I=K\sin\rho identifies \rho as half of the interior dihedral angle along r_{2} (Fig. 15 , left). The integrated term -r_{2}\rho is therefore equivalent, up to an additive constant, to the contribution of the exterior dihedral angle associated with the edge r_{2} , which we denote by \Phi_{r_{2}} . It can be written as r_{2}\Phi_{r_{2}}/2 , and such constant shifts are irrelevant in variational calculations. For the edge l , let H_{l} be the foot of the perpendicular from H onto U_{2}U_{3} (Fig. 15 , right), and let \Pi_{1} and \Pi_{2} be the planes U_{2}U_{3}V_{\sigma} and U_{2}U_{M}V_{\sigma} , respectively. The dihedral angle between \Pi_{1} and \Pi_{2} is \rho . If the direction H_{l}H is rotated by \phi_{l} from the direction of maximal slope, its effective inclination satisfies \tan\Theta_{l}=\tan\rho\,\cos\phi_{l}. (101) From the planar geometry of the triangle H_{l}HU_{M} , the exterior dihedral angle \Phi_{l} obeys \Theta_{l}+\frac{\pi}{2}+(\pi-\Phi_{l})=\pi. (102) Since the difference is a constant, \Theta_{l} is variationally equivalent to \Phi_{l} . An analogous construction shows that \Theta_{r_{1}} is variationally equivalent to the exterior dihedral angle \Phi_{r_{1}} . Figure 15: (Left) Definition of \rho via I=K\sin\rho . (Right) Construction of the angle \Theta_{l} associated with the edge l . Appendix B Derivation of the Mapping Equations from the Explicit Generating Function In this appendix, we verify that the explicit geometric form of the generating function S_{f} derived above correctly reproduces the original mapping equations. Specifically, this verification is performed by applying the canonical relations established in Eq. ( 59 ) and the frequency definition in Eq. ( 61 ). Recall that S_{f} represents the total discrete mean curvature of the tetrahedron U_{1}U_{2}U_{3}\text{-}V_{\sigma} , expressed as the sum of the products of edge lengths and their corresponding exterior dihedral angles. For simplicity, let us denote the lengths of the six edges of the tetrahedron by L_{k} and their corresponding exterior dihedral angles by \Phi_{k} ( k=1,\dots,6 ). In particular, we assign the index k=1 to the diagonal edge U_{1}U_{3} , whose length is given by L_{1}=2I , while the remaining indices correspond to the fixed edges of the crease pattern. The generating function S_{f} is thus written as: S_{f}=\frac{1}{2}\sum_{k=1}^{6}L_{k}\Phi_{k}. (103) Differentiating this expression with respect to the action variable I yields two distinct terms: \frac{dS_{f}}{dI}=\frac{1}{2}\sum_{k=1}^{6}\Phi_{k}\frac{dL_{k}}{dI}+\frac{1}{2}\sum_{k=1}^{6}L_{k}\frac{d\Phi_{k}}{dI}. (104) The second term on the right-hand side represents the variation of the dihedral angles, weighted by the edge lengths. According to the Schläfli formula 15 ; 17 for a closed polyhedron (specifically, a tetrahedron), this sum is identically zero: \sum_{k=1}^{6}L_{k}\,d\Phi_{k}=0\quad\Longrightarrow\quad\sum_{k=1}^{6}L_{k}\frac{d\Phi_{k}}{dI}=0. (105) Consequently, only the first term remains. In the present model, the edge lengths associated with the fixed crease pattern, namely l , r_{1} , and r_{2} , are constant. The only edge whose length depends on I is the diagonal edge U_{1}U_{3} , whose length is given by L_{1}=2I . Let \Phi_{1}=\xi_{f}(I) denote the exterior dihedral angle associated with this edge. The derivative of the generating function therefore simplifies to \frac{dS_{f}}{dI}=\xi_{f}(I). (106) Thus, differentiating the geometric generating function S_{f} with respect to the action variable yields the corresponding conjugate angular variable. *