Continuous-Time Analysis of affine frequency division multiplexing (AFDM) : Fundamental Bounds, and Effects of Pulse-Shaping and Hardware Impairments Michele Mirabella, ​ Hyeon Seok Rou, ​ Pasquale Di Viesti, Giuseppe Thadeu Freitas de Abreu, ​, Giorgio M. Vitetta Abstract Affine frequency division multiplexing (AFDM) has recently emerged as a resilient waveform candidate for high-mobility next-generation wireless systems. However, current literature mostly focuses on discrete time (DT) models, often overlooking effects and hardware non-idealities of actual continuous time (CT) signal generation. In this paper, we bridge this gap by developing a CT -analytical framework based on the affine Fourier series (AFS) representation, which allows us to demonstrate that strictly bandlimited pulses and subcarrier suppression strategies are essential to maintain the multicarrier structure of the signal. In addition, we derive the analytical power spectral density of AFDM and evaluate its spectral characteristics in comparison with other multicarrier schemes, considering the impact of realistic truncated pulse-shaping. Furthermore, we analyze the sensitivity of the CT model to phase noise, carrier frequency offset, and sampling jitter, providing a theoretical analysis of communication performance. Finally, we derive closed-form Cramér-Rao bounds for channel parameter estimation, showing that the chirped modulation peculiar of AFDM increases the estimation variance but enables the resolution of Doppler ambiguities. Our findings provide the necessary theoretical and practical foundations for the implementation of AFDM in realistic wireless transceivers. I Introduction The standardization of the sixth generation (6G) of public wireless networks is driven by the need to support extreme mobility scenarios, including high-speed railway systems, connected autonomous vehicles (CAV) , low earth orbit (LEO) satellite constellations, unmanned aerial vehicles (UAVs) , and more. In such environments, severe time-frequency (TF) dispersion, results in a doubly-selective (DS) , or doubly-dispersive, fading profile, characterized by high Doppler shifts and multipath delays [ 1 , 2 ] , which have been recently investigated for a variety of 6G scenarios [ 3 , 4 , 5 ] . Orthogonal frequency division multiplexing (OFDM) , the cornerstone of fourth generation (4G) and fifth generation (5G) systems, is remarkably robust to frequency-selective fading but suffers significant performance degradation in high-mobility scenarios. In particular, DS channels result in loss of orthogonality among subcarriers, leading to inter-carrier interference (ICI) which complicates channel estimation and detection, significantly deteriorating the performance of OFDM [ 6 ] . To address these challenges, novel waveform designs have been proposed, such as the orthogonal time frequency space (OTFS) modulation, operating in the invariant delay-Doppler (DD) domain and demonstrating excellent robustness to the Doppler effects [ 7 , 8 , 9 ] . Recently, however, affine frequency division multiplexing (AFDM) has emerged as a flexible and promising alternative to OTFS [ 10 , 11 , 12 ] , showing lower detection complexity and greater compatibility with OFDM [ 13 , 14 ] . Based on the discrete affine Fourier transform (DAFT) , AFDM employs chirp-periodic basis functions parameterized by a tunable chirp index. By optimally adjusting this chirp parameter, AFDM can align the signal representation with the Doppler profile of the channel, thus achieving full diversity and ensuring that multipath components remain separable in the affine Fourier domain (AFD) [ 15 ] . This property makes AFDM particularly attractive not only for communications but also for integrated sensing and communications (ISAC) , as it efficiently allows for the estimation of delay and Doppler parameters [ 16 ] . Despite the growing body of literature on AFDM , the majority of existing studies rely exclusively on discrete time (DT) , matrix-algebraic signal models. While sufficient for designing digital precoders or detectors [ 17 ] , DT models fail to capture physical-layer (PHY) issues which may impact practical deployment, since, in real hardware, signals are generated and received in continuous time (CT) . It is worth remarking that CT signal modeling has already shown its usefulness in the analysis of several digital modulation schemes available in the literature. In particular, exhaustive CT analyses have also been conducted for OFDM systems, where such an approach has led to a rigorous characterization of hardware impairments (HWIs) , including pulse-shaping effects, inter-symbol interference (ISI) and ICI , synchronization errors, and phase noise (PN) [ 18 , 19 ] . Other recent examples include the faster-than-Nyquist (FTN) variant of OFDM known as spectrally efficient frequency division multiplexing (SEFDM) [ 20 ] , the precursor of AFDM , namely, orthogonal chirp division multiplexing (OCDM) [ 21 ] , frequency-modulated OFDM [ 22 ] , and of course the more recent OTFS modulation. Beyond interference and synchronization aspects, CT modeling has also proven to be a useful tool for the analysis of the peak behavior of OFDM signals. In this context [ 23 ] exploited a CT analytical framework to study the peak factor of multicarrier waveforms, highlighting limitations of DT representations. Moreover, [ 24 ] derived analytical bounds on the peak-to-mean envelope power ratio (PMEPR) as a function of the oversampling rate, and proposed some methods for peak power estimation together with associated error bounds. In the context of FTN multicarrier schemes, a SEFDM variant that closely follows the OFDM transmission structure, employing a cyclic prefix (CP) , root-raised cosine (RRC) pulse-shaping at the transmitter and the introduction of virtual carriers was recently proposed in [ 25 , 26 ] . This design allows for a simple CT signal representation and significantly simplifies the receiver architecture, especially in terms of channel estimation and subsequent detection, while preserving the spectral efficiency gains of SEFDM over OFDM . For OTFS , recent works such as [ 8 , 9 ] have proposed CT frameworks that explicitly account for pulse-shaping and its impact on pilot placement and channel estimation performance. While [ 8 ] focuses on Zak- OTFS signaling based on TF localized waveforms (i.e., the so-called "pulsones"), [ 9 ] adopts a multicarrier-based approach inspired by OFDM , employing a double CP (DCP) structure and RRC pulses to guarantee ISI -free reception in both time and frequency domains. Similarly, for OCDM , the CT analysis presented in [ 27 ] has allowed the authors to highlight several non-ideal effects, including time-burst interference (TBI) , narrowband interference (NBI) , as well as to derive analytical expressions for the peak-to-average power ratio (PAPR) . Motivated by the above discussion, this paper develops a CT signal model for AFDM modulation, generated by following the typical implementation blocks used for multicarrier schemes. The framework highlights aspects which are often overlooked by DT formulations, including pulse-shaping aspect, receiver filtering, sampling, local oscillator (LO) impairments, and fractional delay and Doppler shifts, and their impact on AFDM orthogonality, performance bounds for communication, and channel parameter estimation. Furthermore, the CT model allows the analysis of implementation-related aspects, such as spectral occupancy, synchronization sensitivity, and the interplay between PN , carrier frequency offset (CFO) , and channel time variations, thereby filling a relevant modeling gap in the AFDM literature and providing tools for realistic performance assessment and advanced transceiver design. Out main contributions can be summarized as follows: 1) We provide, for the first time, a rigorous derivation of the AFDM waveform using a CT model based on the affine Fourier series (AFS) . This framework is closer to physical reality than DT models from current AFDM literature and provides insights for fundamental limitations and real-world implementation. 2) We investigate the effects of pulse-shaping on the AFDM signal, identifying the RRC as the most suitable pulse. We demonstrate analytically and through numerical examples why subcarrier suppression strategies are necessary to maintain the multicarrier signal structure. 2) We investigate the effects of pulse-shaping on the AFDM signal, identifying the RRC as the most suitable pulse. We derive the analytical expression of the power spectral density (PSD) of AFDM , evaluating it under realistic conditions such as pulse truncation. Furthermore, we provide a spectral comparison with other multicarrier schemes, highlighting how pulse-shaping and subcarrier suppression are necessary to maintain the multicarrier signal structure and control out-of-band (OOB) emissions. Despite the use of SCs, AFDM still achieves a higher throughput than OFDM in high-mobility channels, thanks to reduced pilot overhead and improved resilience to ICI , confirming the robustness of AFDM reported in the literature. 3) We extend the CT model to analyze the impact of realistic hardware impairments (HWIs) , PN , CFO , and sampling jitter (SJ) , which are often neglected in matrix-based DT models. 4) We derive the Cramér-Rao Bounds (CRBs) for delay and Doppler estimation in closed form, providing a theoretical benchmark for AFDM sensing performance in DS channels. The rest of the manuscript is organized as follows. Section II introduces the fundamental CT derivation of the AFDM waveform based on the AFS . Section III investigates the analytical PSD , the impact of HWIs on the AFDM received signal, together with the theoretical bit-error-rate (BER) analysis and the derivation of the closed-form CRBs for delay and Doppler estimation in DS channels. Section IV presents numerical results and performance benchmarks to validate our analysis of AFDM , and finally, Section V concludes the paper. Notation : Throughout this paper, superscripts (\cdot)^{\ast} and (\cdot)^{H} denote the complex conjugate and conjugate transpose (Hermitian), respectively. The operator \mathrm{mod}_{B}[\cdot] indicates the modulo B operation, while \ast denotes the linear convolution between two signals or functions. For a complex variable x , we denote its real and imaginary parts as \Re\{x\} and \Im\{x\} , respectively. We define a matrix \mathbf{X}\triangleq[x_{m,n}] , where x_{m,n} represents the element in the m th row and n th column. \mathbf{I}_{N} denotes the identity matrix of order N , and \mathbf{\Xi}_{V} represents the unitary discrete Fourier transform (DFT) matrix of order V , where the (p,q) th entry is given by \exp(-j2\pi pq/V)/\sqrt{V} . Finally, \mathrm{diag}(\mathbf{x}_{N}) denotes an N\times N diagonal matrix with the elements of the N -dimensional vector \mathbf{x}_{N} on its main diagonal. II System and Signal Models In this section, we develop the CT analytical model for AFDM , starting from its DT formulation. The proposed derivation follows the same rules adopted for OFDM in [ 9 , Sec. II-A] , but it extends it to the AFD , thus providing a rigorous framework to investigate the physical interpretation, pulse-shaping effects and spectral properties of AFDM signals. To this end, the section is organized into three parts. The first subsection presents the generation of the AFDM transmit signal, highlighting the role of the modulation parameters and the transmit pulse in shaping the chirp-periodic waveform. The second subsection derives the received signal model under ideal, non-distorting channel conditions, illustrating the basic demodulation mechanism and its relationship with the DAFT . Finally, the third section extends the analysis to the case of a DS channel, characterized by both time and frequency dispersion. II-A Generation of AFDM Signals Consider the transmission of an N -dimensional 1 1 1 An even value of N is assumed in this paper. information vector \mathbf{c}_{N}\triangleq[c_{0},c_{1},...,c_{N-1}]^{T} , whose entries are symbols drawn from an M_{\mathrm{c}} ary constellation. This vector represents one AFDM symbol and carries the information in the AFD . According to [ 10 ] , the mapping between the AFD and the time domain (TD) is achieved through the inverse discrete affine Fourier transform (IDAFT) with parameters (\lambda_{1},\lambda_{2}) as \mathbf{x}_{N}=\mathbf{A}_{\lambda_{1},\lambda_{2}}^{\mathrm{H}}\,\mathbf{c}_{N}\text{,} (1) where \mathbf{A}_{\lambda_{1},\lambda_{2}}\triangleq\boldsymbol{\Lambda}_{\lambda_{2}}\,\boldsymbol{\Xi}_{N}\,\boldsymbol{\Lambda}_{\lambda_{1}} (2) is the DAFT matrix, and \boldsymbol{\Lambda}_{\lambda}\triangleq\mathrm{diag}\bigl(\mathbf{a}_{N,\lambda}\bigr)\text{,} (3) where \mathbf{a}_{N,\lambda}\triangleq[a_{\lambda,0},...,a_{\lambda,N-1}]^{T} and a_{\lambda,n}\triangleq\exp(-j2\pi\lambda n^{2}) . It is easy to show that the n th element of \mathbf{x}_{N} , in ( 1 ), can be expressed as x_{n}=\frac{1}{\sqrt{N}}\sum_{m=0}^{N-1}c_{m}\,\exp\bigl(j2\pi(\lambda_{1}n^{2}+\lambda_{2}m^{2}+mn/N)\bigr)\text{,} (4) for which the chirp periodicity property x_{n+lN}=x_{n}\exp\Bigl(j2\pi\lambda_{1}\bigl(l^{2}N^{2}+2nlN\bigr)\Bigr)\text{,} (5) holds for any choice of indices (l,n) . Moreover, the inverse chirp periodicity property c_{m+lN}=c_{m}\exp\Bigl(-j2\pi\lambda_{2}\bigl(l^{2}N^{2}+2mlN\bigr)\Bigr)\text{,} (6) also holds, for any pair of indices (m,l) . In order to obtain a CT waveform, the vector \mathbf{x}_{N} in ( 1 ) is periodically extended, yielding the chirp-periodic sequence {\bar{x}_{k}} , so that \bar{x}_{k}=x_{k} for any k\in\{0,1,...,N-1\} and \bar{x}_{k}=x_{\mathrm{mod}_{N}[k]}\,\exp\bigl(j2\pi\lambda_{1}(N^{2}+2Nk)\bigr), (7) holds for any k\notin\{0,1,...,N-1\} . As shown in Fig. 2 , the phase \angle\{\bar{x}_{k}\} of the AFDM sequence repeats every N samples, illustrating the DT chirp-periodic extension of the original vector \mathbf{x}_{N} . The OFDM phase, obtained from the same quadrature amplitude modulation (QAM) symbols with \lambda_{1}=\lambda_{2}=0 , is also shown as a reference, highlighting the effect of the chirp-periodic modulation on the phase evolution. The sequence \{\bar{x}_{k}\} feeds a pulse amplitude modulator, which produces the baseband signal s(t;\mathbf{c}_{N})\!=\!\!\!\!\sum_{k=-\infty}^{+\infty}\bar{x}_{k}\,p(t-kT_{\mathrm{s}})\exp({-j2\pi\lambda_{1}k^{2}})\exp\Bigl(j2\pi\bar{\lambda}_{1}t^{2}\Bigr)\text{,} (8) where \bar{\lambda}_{1}=\lambda_{1}/T_{\mathrm{s}}^{2} is the chirp parameter in \text{Hz}^{2} . In ( 8 ), it is important to observe that: 1) the resulting signal is chirp-periodic with period T\triangleq NT_{\mathrm{s}} , since s(t+T;\mathbf{c}_{N})=s(t;\mathbf{c}_{N})\exp\bigl(j2\pi\bar{\lambda}_{1}(T^{2}+2Tt)\bigr)\text{,} (9) and 2) the quadratic phase terms in ( 8 ) compensate and induce the time-varying frequency characteristic of AFDM signals. Figure 1: Magnitude (left) and unwrapped phase (right) of the CT AFDM (with \lambda_{1}=\lambda_{2}=0.007 ) and OFDM signals generated from the same 4 - QAM symbols over multiple periods. Vertical dashed lines indicate the signal period T . The following parameters have been employed for generating the CT signals: 1) N=64 ; 2) RRC pulse p(t) with roll-off factor \alpha=0.15 ; 3) oversampling factor N_{\mathrm{c}}=10 ; 4) T_{\mathrm{s}}=1.04 µs. Fig. 1 illustrates the magnitude and phase of the CT AFDM signal generated from the chirp-periodic sequence \{\bar{x}_{k}\} . The OFDM signal, obtained from the same QAM symbols (with \lambda_{1}=\lambda_{2}=0 ) is shown as a reference. Vertical dashed lines correspond to multiples of the period T , highlighting the chirp-periodicity of the AFDM signal. As expected from ( 8 ), the AFDM phase evolves quadratically within each period, showing the time-varying frequency characteristic induced by the quadratic phase terms, whereas the OFDM phase remains piecewise constant over each symbol period. Because of its chirp-periodicity, which is obtained, in practive, through the insertion of a chirp-periodic prefix (CPP) of length N_{\mathrm{cpp}} [ 10 ] , the signal in ( 8 ) admits the AFS representation (see App. A-A ) s(t;\mathbf{c}_{N})=\sum_{m=-\infty}^{+\infty}S_{m}(\mathbf{c}_{N})\,\exp\left(j2\pi\left(\bar{\lambda}_{1}t^{2}+\frac{m}{T}t\right)\right)\text{,} (10) holding in the interval [0,T] ; here S_{m}(\mathbf{c}_{N})=\frac{1}{T}\int_{0}^{T}\!\!\!s(t,\mathbf{c}_{N})\,\exp\left(-j2\pi\left(\bar{\lambda}_{1}t^{2}+\frac{m}{T}t\right)\right)\,{\rm d}t\text{,} (11) is the m th coefficient of such series, which embeds the information vector \mathbf{c}_{N} and the effect of pulse-shaping. Substituting the right-hand side (RHS) of ( 8 ) into that of ( 11 ), reorganizing the summations, and using the property in ( 5 ), one obtains, after simple manipulations, S_{m}(\mathbf{c}_{N})=\frac{1}{\sqrt{N}T_{\mathrm{s}}}\,c_{m}\,P_{m}\,\exp\bigl(j2\pi\lambda_{2}m^{2}\bigr)\text{,} (12) where P_{m}\triangleq P(m\Delta_{f}) , \Delta_{f}\triangleq 1/(NT_{\mathrm{s}}) is the subcarrier spacing and P(f) denotes the continuous Fourier transform (CFT) of the pulse p(t) . Figure 2: Unwrapped phase of the DT sequences \{\bar{x}_{k}\} for both AFDM and OFDM , generated from the same 4 - QAM symbols. Vertical dashed lines indicate multiples of the symbol period N=64 . AFDM parameters \lambda_{1}=\lambda_{2}=0.007 are used for the chirp-periodic sequence. The OFDM curve ( \lambda_{1}=\lambda_{2}=0 ) is included for comparison. Replacing ( 12 ) in ( 10 ) yields the CT AFDM signal model \displaystyle s(t;\mathbf{c}_{N})=\frac{1}{\sqrt{N}T_{\mathrm{s}}}\sum_{m=-\infty}^{+\infty}c_{m}\,P_{m}\,\exp(j2\pi\lambda_{2}m^{2}) (13) \displaystyle\hskip-86.11084pt\cdot\exp\left(j2\pi\left(\bar{\lambda}_{1}t^{2}+\frac{m}{T}t\right)\right)\text{.} By expressing m=q+kN with q\in[-N/2,\,N/2-1] , for any k and using ( 6 ), ( 13 ) becomes \displaystyle s(t;\mathbf{c}_{N})=\frac{1}{\sqrt{N}\,T_{\mathrm{s}}}\sum_{q=-N/2}^{N/2}c_{\mathrm{mod}_{N}[q]}\exp\Bigl(j2\pi\lambda_{2}q^{2}\Bigr) (14) \displaystyle\hskip-193.74939pt\cdot\exp\Bigl(j2\pi\Bigl(\bar{\lambda}_{1}t^{2}+\frac{q}{T}t\Bigr)\Bigr)\sum_{k=-\infty}^{+\infty}P_{q+kN}\,\exp\Bigl(j2\pi\frac{k}{T_{\mathrm{s}}}t\Bigr)\text{.} As in conventional OFDM [ 18 , Sec. 3.7.2] , waveform deployments rely on strictly bandlimited transmit (TX) pulses to generate a structured multicarrier signal, which force the sum over k in ( 14 ) to vanish. As a result, the residual spectral replicas do not overlap with the useful band, thereby preventing self-interference (SI) . In practice, a RRC pulse is often employed. Owing to its excess bandwidth , only a subset N_{\mathrm{u}}{B_{\mathrm{rx}}}/{2},\\ \end{cases} (19) with f_{\tilde{n},m}\triangleq(A\tilde{n}+m)\Delta_{f} and B_{\mathrm{rx}} being the RX pulse bandwidth. It is easy to prove that by selecting 1) A=1 and 2) B_{\mathrm{rx}}=\lceil 2N(1+\alpha)\rceil\Delta_{f} , then U^{\ast}\bigl(f_{\tilde{n},m}\bigr)=\sqrt{T_{\mathrm{s}}} for any \tilde{n}\in\{0,1,...,N-1\} and any m\in\{-N_{\alpha},-N_{\alpha}+1,...,-1,0,1,...N_{\alpha}\} . This allows us to express ( 18 ) as \displaystyle\breve{r}_{\tilde{n}}\triangleq r(t_{\tilde{n}};\mathbf{c}_{N})=\frac{1}{\sqrt{N}}\sum_{m=-N_{\alpha}}^{N_{\alpha}}c_{\mathrm{mod}_{N}[m]} (20) \displaystyle\hskip-86.11084pt\cdot\exp\left(j2\pi\left(\lambda_{1}\tilde{n}^{2}+\frac{m}{N}\tilde{n}+\lambda_{2}m^{2}\right)\right), provided that P_{\mathrm{mod}_{N}[m]}=\sqrt{T_{\mathrm{s}}} for each considered m . Storing the sequence \{\breve{r}_{\tilde{n}};\tilde{n}=0,1,...,N-1\} into the N -dimensional vector \mathbf{r}_{N}\triangleq[\breve{r}_{0},\breve{r}_{1},...,\breve{r}_{N-1}]^{T}=\mathbf{A}_{\lambda_{1},\lambda_{2}}^{H}\,\mathbf{c}_{N}\text{,} (21) immediately shows that \mathbf{c}_{N} can be obtained from \mathbf{r}_{N} by applying an order N DAFT , with parameters (\lambda_{1},\lambda_{2}) , to the vector \mathbf{r}_{N} , so that \mathbf{y}_{N}\triangleq[y_{0},y_{1},...,y_{N-1}]^{T}=\mathbf{A}_{\lambda_{1},\lambda_{2}}\,\mathbf{r}_{N}=\mathbf{c}_{N}\text{.} (22) II-C Receive Signal Model of AFDM in DS Channels Let us focus now on the reception on a linear time-variant (LTV) multipath fading channel characterized by channel impulse response (CIR) h(t,\tau)=\sum_{l=0}^{L-1}h_{l}(t,\tau), (23) where h_{l}(t,\tau)\triangleq a_{l}\,\exp(j2\pi\nu_{l}t)\,\delta(\tau-\tau_{l})\text{,} (24) denotes the l th path contribution, while a_{l} , \tau_{l} and \nu_{l} represent the gain, the delay 2 2 2 We assume the CIR components are arranged in ascending order of delays, so that \tau_{0} and \tau_{L-1} are the minimum and maximum delays, respectively. and the Doppler shift associated with the l th channel path, respectively, and L is the overall number of paths. We first consider the contribution of the l th channel path h_{l}(t,\tau) (see ( 24 )) to the RX signal after RX filtering as r_{l}(t;\mathbf{c}_{N})=s(t;\mathbf{c}_{N})\ast h_{l}(t,\tau)\ast g(t)\text{,} (25) where the additive noise term was neglected for simplicity. It is not difficult to prove that the last signal can be alternatively expressed as \displaystyle\hskip-12.91663ptr_{l}(t;\mathbf{c}_{N})=\frac{\tilde{a}_{l}}{\sqrt{N}T_{\mathrm{s}}}\!\sum_{m=-N_{\alpha}}^{N_{\alpha}}\!\!\!\!c_{\mathrm{mod}_{N}[m]}\,P_{\mathrm{mod}_{N}[m]}\exp\bigl(j2\pi\lambda_{2}m^{2}\bigr)\hskip-34.44434pt (26) \displaystyle\hskip-206.66602pt\cdot\exp\Bigl(-j2\pi\frac{m}{T}\tau_{l}\Bigr)U^{\ast}\Bigl(2\bar{\lambda}_{1}(t-\tau_{l})+\frac{m}{T}+\nu_{l}\Bigr) \displaystyle\hskip-206.66602pt\cdot\exp\left(j2\pi\left(\bar{\lambda}_{1}t^{2}+\frac{m}{T}t\right)\right)\,\exp\bigl(j2\pi(\nu_{l}-2\bar{\lambda}_{1}\tau_{l})\,t\bigr)\text{,} where \tilde{a}_{l}\triangleq a_{l}\exp(j2\pi\bar{\lambda}_{1}\tau_{l}^{2})\exp(-j2\pi\nu_{l}\tau_{l}) . After 1) sampling the last signal at the instants t_{\tilde{n}}\triangleq\tau_{L-1}+\tilde{n}T_{\mathrm{s}} and 2) following the same rules employed to evaluate ( 20 ), one obtains \bar{r}_{l,\tilde{n}}=\frac{\breve{a}_{l}}{\sqrt{N}T_{\mathrm{s}}}\sum_{m=-N_{\alpha}}^{N_{\alpha}}c_{\mathrm{mod}_{N}[m]}\,P_{\mathrm{mod}_{N}[m]}\,\bar{U}_{m}^{\ast}\\ \cdot\exp\left(j2\pi\left(\lambda_{1}\tilde{n}^{2}+\frac{m}{N}\tilde{n}+\lambda_{2}m^{2}\right)\right)\\ \cdot\exp\bigl(j2\pi mF_{\tau_{l}}\bigr)\,\exp\Bigl(j2\pi(F_{\nu_{l}}/N+2\lambda_{1}NF_{\tau_{l}})\tilde{n}\Bigr)\text{,} (27) where, \breve{a}_{l}\triangleq\tilde{a}_{l}\exp(j2\pi\bar{\lambda}_{1}\tau_{L-1}^{2})\,\exp\bigl(j2\pi(\nu_{l}-2\bar{\lambda}_{1}\tau_{l})\,\tau_{L-1}\bigr)\text{,} (28) F_{\tau_{l}}\triangleq\frac{\tau_{L-1}-\tau_{l}}{NT_{\mathrm{s}}}\text{,} (29) F_{\nu_{l}}\triangleq\nu_{l}/\Delta_{f}\text{,} (30) respectively denote the complex gain, the normalized delay and the normalized Doppler frequency associated 3 3 3 In obtaining ( 27 ), |NF_{\tau_{l}}|