An Entropy-Stable Oscillation-Eliminating DGSEM for the Euler Equations on Curvilinear Meshes Thanks: This work is supported in part by NSF DMS-2410740. Jieling Yang 1, Guosheng Fu 1 Abstract . We develop an entropy-stable high-order numerical method for the two-dimensional compressible Euler equations on general curvilinear meshes. The proposed approach is based on a nodal discontinuous Galerkin spectral element method (DGSEM) that satisfies the summation-by-parts (SBP) property. At the semidiscrete level, entropy stability is established through the SBP structure and the discrete metric identities associated with curvilinear coordinate mappings. By incorporating entropy-stable numerical fluxes at element interfaces, a global discrete entropy inequality is obtained. To further control nonphysical oscillations near strong discontinuities, the entropy-stable DG formulation is combined with a modified oscillation-eliminating discontinuous Galerkin (OEDG) method, which was originally proposed in 59 . We observe that the zero-order damping coefficient in the original OEDG method naturally serves as an effective shock indicator, which enables localization of the oscillation control mechanism and significantly reduces computational cost. Moreover, while the original OEDG formulation relies on local orthogonal modal bases and is primarily restricted to simplicial meshes, we reformulate the OE procedure using projection operators, allowing for a systematic extension to general curvilinear meshes. The resulting method preserves conservation and entropy stability while effectively suppressing spurious oscillations. A series of challenging numerical experiments is presented to demonstrate the accuracy, robustness, and effectiveness of the proposed entropy-stable OEDG method on both Cartesian and curvilinear meshes. Keywords: Euler equation, discontinuous Galerkin method, curvilinear mesh, entropy stable, oscillation eliminating, shock indicator 1. Introduction The compressible Euler equations play a fundamental role in fluid dynamics and serve as a core mathematical model for a wide range of applications, including aerodynamics, astrophysical flows, gas dynamics, and high-speed compressible flows. As a nonlinear hyperbolic system of conservation laws, the Euler equations admit complex solution structures such as shock waves, contact discontinuities, and rarefaction waves, even when evolving from smooth initial data. Accurately and robustly resolving these multiscale and strongly nonlinear phenomena remains a central challenge in computational fluid dynamics 1 ; 2 . The development of numerical methods for the Euler equations is driven by the simultaneous requirements of accuracy, stability, and robustness. Among the many numerical approaches that have been proposed, discontinuous Galerkin (DG) methods are particularly attractive due to their ability to achieve high-order accuracy on complex geometries while maintaining local conservation. Consequently, DG methods have become an increasingly popular choice for the approximation of hyperbolic conservation laws, including the compressible Euler equations 17 . Beyond accuracy, stability and robustness are essential for reliable simulations. In particular, preserving fundamental physical properties of the Euler equations, such as entropy stability and positivity of density and pressure, is crucial for the success of a numerical scheme. In addition, the control of nonphysical numerical oscillations near discontinuities remains an important and challenging issue for high-order methods. The entropy inequality is a fundamental physical property of the Euler equations and serves as an admissibility criterion for physically relevant solutions. It is well known that shock waves and contact discontinuities may develop during the evolution of the Euler equations, even when the initial and boundary data are smooth. As a consequence, solutions are generally understood in the weak (distributional) sense. However, weak solutions are not unique, and additional admissibility conditions are required to single out the physically meaningful solution. This role is played by entropy conditions, which are consistent with the second law of thermodynamics. From a numerical perspective, it is therefore essential to design schemes that preserve entropy properties at the discrete level. The pioneering work of Tadmor 68 introduced the concept of entropy-conservative and entropy-stable schemes for systems of conservation laws, leading to the construction of first-order entropy-stable finite volume methods based on specially designed entropy-conservative numerical fluxes. Subsequent extensions include second-order schemes 69 and arbitrarily high-order methods 27 , relying on high-order entropy-conservative flux constructions 50 . These developments laid the theoretical foundation for entropy-stable high-order discretizations. In the context of discontinuous Galerkin (DG) methods, early progress on entropy stability was made by Jiang and Shu 45 , who established a discrete entropy inequality for scalar conservation laws using the square entropy. This analysis was later extended to linear symmetric hyperbolic systems by Hou and LeFloch 40 . Despite these foundational contributions, entropy-stable DG formulations remained limited in both scope and applicability for many years. Substantial advances have been achieved more recently through the work of Carpenter et al. 8 ; 24 , who exploited the summation-by-parts (SBP) property of nodal DG discretizations based on Gauss–Legendre–Lobatto (GLL) points. These methods are commonly referred to as the DG spectral element method with Gauss–Legendre–Lobatto points (DGSEM–GLL) 20 ; 76 . Building on this framework, Chen and Shu 14 ; 15 developed a unified approach for constructing high-order entropy-stable DG methods for general systems on unstructured triangular meshes using SBP operators. Further developments and refinements of entropy-stable DGSEM formulations have been reported in 19 ; 12 ; 10 . Entropy-stable DGSEM–GLL methods have since been successfully applied to a broad class of systems, including the Euler and Navier–Stokes equations 19 , shallow water equations 30 ; 73 , magnetohydrodynamics (MHD) 6 ; 55 , and multiphase or multicomponent flows 64 . Finally, it is worth noting that DGSEM–GLL methods are closely related to summation-by-parts finite difference operators coupled with simultaneous approximation terms (SAT) 31 ; 32 . The construction of entropy-stable schemes on curvilinear meshes poses additional challenges. In this setting, entropy stability must be achieved simultaneously with the preservation of discrete geometric conservation laws (GCLs), which is essential for maintaining free-stream preservation and nonlinear stability. Important progress in this direction has been reported in 26 ; 9 ; 19 ; 11 ; 6 , where careful discretization of geometric terms is required to ensure compatibility between entropy stability and the discrete metric identities 46 . Despite these advances, entropy stability alone is generally insufficient to eliminate nonphysical oscillations near strong discontinuities. Such oscillations are closely related to the classical Gibbs phenomenon 34 and are particularly pronounced in high-order numerical schemes, including discontinuous Galerkin methods. If left uncontrolled, Gibbs-type oscillations may severely degrade solution quality, compromise robustness, or even lead to numerical breakdown. Consequently, additional nonlinear stabilization mechanisms are indispensable in practical computations for hyperbolic conservation laws. A wide range of shock-capturing techniques has been developed to suppress nonphysical oscillations. Limiter-based approaches, such as total variation diminishing (TVD) and total variation bounded (TVB) limiters 17 ; 7 , as well as ENO and weighted ENO (WENO) limiters 62 ; 79 ; 80 , modify local solution reconstructions in troubled cells to enforce monotonicity or boundedness. Another widely used strategy is the introduction of artificial viscosity(AV), which adds localized dissipation in regions with strong gradients 43 ; 44 ; 60 ; 5 . More recently, the oscillation-free DG (OFDG) framework has been systematically developed by Lu, Liu, and Shu 57 ; 53 . In OFDG, damping terms are incorporated directly into the DG formulation to suppress spurious oscillations. This approach has demonstrated strong robustness and has been extended to a variety of systems, including chemically reacting flows 23 ; 81 , shallow water equations 56 , and magnetohydrodynamics 54 . However, the additional damping terms render the resulting semidiscrete system highly stiff, leading to severe time-step restrictions in explicit time integration. To alleviate this limitation, Peng et al. proposed the oscillation-eliminating DG (OEDG) method in 59 . The OEDG method follows a similar damping-based philosophy as OFDG, but formulates the oscillation control mechanism as a local pseudo-time evolution problem that can be solved exactly. As a result, the stiffness associated with the damping terms is removed, and the stringent time-step constraints of OFDG are largely mitigated. Since its introduction, OEDG has been successfully applied to a variety of problems, including systems with complex wave interactions 52 ; 22 ; 75 . Despite its advantages, the original OEDG formulation still faces several practical challenges. In particular, the computation of damping coefficients involves the evaluation of high-order spatial derivatives in multiple directions, which can be computationally expensive. Moreover, the direct extension of OEDG to curvilinear meshes is not straightforward due to the lack of tensor-product structure and the presence of geometric complexities. In this work, we address these limitations and further develop the OEDG framework. First, we observe that the damping coefficients appearing in the OE procedure naturally serve as effective shock indicators, closely related to the classical KXRCF indicator 47 . By exploiting this connection, the OE procedure can be selectively applied only in troubled cells, significantly reducing computational cost. Second, we extend the OEDG methodology to curvilinear meshes in a systematic and efficient manner. The primary contribution of this work is the further development of the entropy stable oscillation-eliminating discontinuous Galerkin (OEDG) framework for the compressible Euler equations. Specifically, the OEDG methodology is generalized to curvilinear meshes, where geometric complexity poses additional challenges. A new shock indicator, derived directly from the OE damping coefficients, is introduced to localize the oscillation control mechanism and significantly reduce computational cost. The modified OEDG procedure is then combined with an entropy-stable DG formulation, resulting in a robust high-order nodal DG method that simultaneously enforces entropy stability and effectively suppresses nonphysical oscillations on general curvilinear meshes. The performance of the proposed method is demonstrated through a series of challenging numerical experiments. The remainder of the paper is organized as follows. In Section 2 , we review the entropy properties of the Euler equations, their formulation in curvilinear coordinates, and the nodal DG polynomial framework. Section 3 presents the entropy-stable DGSEM formulation on curvilinear meshes. The oscillation-eliminating procedure is introduced and analyzed in Section 4 . Numerical examples demonstrating the accuracy, robustness, and effectiveness of the proposed method are provided in Section 5 . Finally, concluding remarks are given in Section 6 . 2. Preliminary This section summarizes the theoretical background required for the construction and analysis of entropy-stable nodal discontinuous Galerkin methods for the two-dimensional Euler equations on curvilinear meshes. In particular, we review the entropy properties of the Euler equations, introduce their formulation in curvilinear coordinates, and describe the nodal discontinuous Galerkin polynomial spaces used throughout this work. 2.1. Entropy properties of the Euler equations We consider the compressible Euler equations written in conservative form (1) \partial_{t}\bm{U}+\nabla\cdot\bm{F}(\bm{U})=0, where the vector of conservative variables is (2) \bm{U}=\begin{pmatrix}\rho\\ \rho\bm{u}\\ E\end{pmatrix}, with density \rho , velocity \bm{u}=(u,v)^{T} , and total energy E=\rho e+\tfrac{1}{2}\rho|\bm{u}|^{2}. The flux tensor is given by (3) \bm{F}(\bm{U})=\begin{pmatrix}\rho\bm{u}\\ \rho\bm{u}\otimes\bm{u}+p\bm{I}\\ (E+p)\bm{u}\end{pmatrix}, where the pressure p is related to (\rho,e) through an equation of state. Throughout this work, we assume an ideal gas equation of state, p=(\gamma-1)\rho e,\qquad\gamma=1.4. In two spatial dimensions, the flux tensor can be written as (4) \displaystyle\bm{F}(\bm{U})=(\bm{f}(\bm{U}),\bm{g}(\bm{U}))^{T},\qquad\bm{U}=(U_{1},U_{2},U_{3},U_{4})^{T}, \displaystyle\bm{f}(\bm{U})=(\rho u,\ \rho u^{2}+p,\ \rho uv,\ (E+p)u)^{T}, \displaystyle\bm{g}(\bm{U})=(\rho v,\ \rho uv,\ \rho v^{2}+p,\ (E+p)v)^{T}, so that the Euler equations take the componentwise form (5) \partial_{t}U_{k}+\partial_{x}f_{k}(\bm{U})+\partial_{y}g_{k}(\bm{U})=0,\qquad k=1,\dots,4. The Euler system is nonlinear and hyperbolic, and solutions may develop discontinuities such as shocks and contact discontinuities in finite time, even for smooth initial data. As a consequence, weak solutions are generally not unique, and additional admissibility criteria are required to select physically relevant solutions. These criteria are provided by entropy conditions. An entropy function–entropy flux pair (\eta(\bm{U}),\bm{q}(\bm{U})) consists of a strictly convex scalar entropy \eta and an associated entropy flux \bm{q} satisfying (6) \eta^{\prime}(\bm{U})\bm{F}^{\prime}(\bm{U})=\bm{q}^{\prime}(\bm{U}). For smooth solutions, multiplication of the Euler equations by \eta^{\prime}(\bm{U}) yields the entropy conservation law (7) \partial_{t}\eta(\bm{U})+\nabla\cdot\bm{q}(\bm{U})=0. Across discontinuities, entropy is no longer conserved. A weak solution \bm{U} is called an entropy solution if it satisfies the entropy inequality (8) \partial_{t}\eta(\bm{U})+\nabla\cdot\bm{q}(\bm{U})\leq 0\quad\text{in the sense of distributions}, which is consistent with the second law of thermodynamics. Associated with a convex entropy \eta(\bm{U}) are the entropy variables (9) \bm{V}:=\frac{\partial\eta}{\partial\bm{U}}. Strict convexity of \eta implies that the mapping \bm{U}\leftrightarrow\bm{V} is one-to-one on the admissible state space. Introducing the flux functions expressed in entropy variables, \bm{G}(\bm{V})=\bm{F}\Big(\bm{U}(\bm{V})\Big) , the compatibility condition above is equivalent to the symmetry of the Jacobians \bm{G}_{j}^{\prime}(\bm{V}) for each spatial direction j . This symmetrization property is fundamental for entropy analysis and motivates the introduction of the potential function and potential fluxes, (10) \displaystyle\phi(\bm{V})=\bm{U}(\bm{V})^{T}\bm{V}-\eta\Big(\bm{U}(\bm{V})\Big), \displaystyle\bm{\psi}_{j}(\bm{V})=\bm{G}_{j}(\bm{V})^{T}\bm{V}-\bm{q}_{j}\Big(\bm{U}(\bm{V})\Big),\qquad j=1,2, which play a central role in the design of entropy-conserving and entropy-stable numerical schemes. For the ideal-gas Euler equations, the physical specific entropy is s=\log(p\rho^{-\gamma}) . While the Euler system admits a family of entropy pairs 39 , the physically relevant entropy for the Navier–Stokes equations with viscosity and heat conduction is uniquely given by 41 (11) \eta=-\frac{\rho s}{\gamma-1},\qquad\bm{q}=-\frac{\rho s\,\bm{u}}{\gamma-1}. The corresponding entropy variables and potential fluxes are (12) \bm{V}=\begin{pmatrix}\dfrac{\gamma-s}{\gamma-1}-\dfrac{|\bm{u}|^{2}}{2c^{2}}\\[3.44444pt] u/c^{2}\\[1.72218pt] v/c^{2}\\[1.72218pt] -1/c^{2}\end{pmatrix},\qquad\bm{\psi}=(\psi^{f},\psi^{g})=\rho\bm{u}, where c=\sqrt{\gamma p/\rho} denotes the speed of sound. Throughout this paper, we adopt the entropy function ( 11 ). The entropy variables provide a symmetrizing change of variables under which the Euler equations can be written in symmetric form. This structure underpins the continuous entropy analysis and serves as the foundation for the construction of entropy-conserving numerical fluxes and entropy-stable DG discretizations developed in the subsequent sections. 2.2. Formulation in curvilinear coordinates To construct high-order discretizations on curvilinear meshes, we transform the Euler equations ( 5 ) to a reference coordinate system. The spatial domain \Omega\subset\mathbb{R}^{2} is decomposed into non-overlapping curved quadrilateral elements \{\Omega_{e}\} , each of which is mapped to the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} . Let (\xi,\eta)\in\Omega_{\mathrm{ref}} denote the reference coordinates and (x^{e},y^{e})\in\Omega_{e} the corresponding physical coordinates. The element mapping is given by \vec{x}^{\,e}(\xi,\eta)=\big(x^{e}(\xi,\eta),\,y^{e}(\xi,\eta)\big), where the superscript (\cdot)^{e} indicates quantities associated with the element \Omega_{e} . Under this mapping, the conservative variables are pulled back to the reference element via \bm{U}^{e}(\xi,\eta):=\bm{U}\big(x^{e}(\xi,\eta),y^{e}(\xi,\eta)\big). Applying the chain rule to ( 5 ), the Euler equations on the reference element take the form (13) \mathcal{J}^{e}\,\partial_{t}U_{k}^{e}+\partial_{\xi}\tilde{f}_{k}^{e}+\partial_{\eta}\tilde{g}_{k}^{e}=0,\qquad k=1,2,3,4, where \mathcal{J}^{e} denotes the Jacobian of the coordinate transformation and \tilde{f}_{k}^{e} , \tilde{g}_{k}^{e} are the contravariant flux components. The Jacobian and contravariant fluxes are defined by (14) \displaystyle\mathcal{J}^{e} \displaystyle=x^{e}_{\xi}y^{e}_{\eta}-x^{e}_{\eta}y^{e}_{\xi}, \displaystyle\tilde{f}_{k}^{e}(\bm{U}^{e}) \displaystyle=y^{e}_{\eta}f_{k}(\bm{U}^{e})-x^{e}_{\eta}g_{k}(\bm{U}^{e}),\qquad k=1,2,3,4, \displaystyle\tilde{g}_{k}^{e}(\bm{U}^{e}) \displaystyle=-\,y^{e}_{\xi}f_{k}(\bm{U}^{e})+x^{e}_{\xi}g_{k}(\bm{U}^{e}),\qquad k=1,2,3,4, where f_{k} and g_{k} denote the Cartesian flux components defined in ( 4 ). Since the Jacobian \mathcal{J}^{e} is generally non-constant, the transformed system ( 13 ) constitutes a variable-coefficient hyperbolic system on the reference element. A fundamental property of smooth coordinate mappings is the satisfaction of the metric identities (15) \partial_{\xi}x^{e}_{\eta}=\partial_{\eta}x^{e}_{\xi},\qquad\partial_{\xi}y^{e}_{\eta}=\partial_{\eta}y^{e}_{\xi}, which follow from the commutation of mixed partial derivatives. At the discrete level, however, these identities are not automatically satisfied and must be preserved through a compatible discretization of the geometric terms. 2.3. DG polynomials on the reference element On the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} , we approximate all scalar- and vector-valued quantities by polynomials of degree at most N in each coordinate direction. To this end, we introduce N+1 Legendre–Gauss–Lobatto (LGL) points \{\xi_{i}\}_{i=0}^{N} and \{\eta_{j}\}_{j=0}^{N} on the interval [-1,1] in each coordinate direction. Associated with these nodes are the one-dimensional Lagrange interpolation polynomials (16) \phi_{j}(\xi)=\prod_{\begin{subarray}{c}i=0\\ i\neq j\end{subarray}}^{N}\frac{\xi-\xi_{i}}{\xi_{j}-\xi_{i}},\qquad j=0,\ldots,N, which satisfy the nodal interpolation property \phi_{j}(\xi_{i})=\delta_{ij} . Using tensor products of the one-dimensional basis functions, we define the nodal polynomial space (17) \mathbb{Q}_{N}(\Omega_{\mathrm{ref}}):=\mathrm{span}\Big\{\phi_{i}(\xi)\phi_{j}(\eta)\;:\;0\leq i,j\leq N\Big\}, that is, the space of polynomials of degree at most N in each coordinate direction. Any scalar function U on \Omega_{\mathrm{ref}} can be approximated by U_{N}\in\mathbb{Q}_{N}(\Omega_{\mathrm{ref}}) as (18) {U}(\xi,\eta)\approx U_{N}(\xi,\eta)=\sum_{i=0}^{N}\sum_{j=0}^{N}U_{i,j}\phi_{i}(\xi)\phi_{j}(\eta), where \{U_{i,j}\} are the nodal degrees of freedom (DOFs). In particular, for a component of the conservative variable U_{k} on physical element \Omega_{e} , we approximate it via the pull back: (19) \displaystyle U_{k}(x^{e}(\xi,\eta),y^{e}(\xi,\eta))={U}_{k}^{e}(\xi,\eta)\approx{U}_{k,N}^{e}(\xi,\eta)=\sum_{i=0}^{N}\sum_{j=0}^{N}(U^{e}_{k})_{i,j}\phi_{i}(\xi)\phi_{j}(\eta),\quad k=1,2,3,4. Moreover, we also use \mathbb{Q}_{N}(\Omega_{\mathrm{ref}}) to approximate flux functions \bm{F}(\bm{U}) via interpolation: (20) \displaystyle\bm{F}(\bm{U}(x^{e}(\xi,\eta),y^{e}(\xi,\eta)))\approx\bm{F}_{N}(\bm{U}_{N}^{e})(\xi,\eta)=\sum_{i=0}^{N}\sum_{j=0}^{N}\bm{F}(\bm{U}_{i,j}^{e})\phi_{i}(\xi)\phi_{j}(\eta). This collocation-based formulation allows all unknowns and fluxes to be represented solely by their values at the LGL nodes. To approximate derivatives, we introduce the differentiation matrix (21) D_{i,j}=\phi_{j}^{\prime}(\xi_{i}),\qquad i,j=0,\ldots,N, so that nodal derivatives in reference space are given by (22) \displaystyle\dfrac{\partial U}{\partial\xi}(\xi_{i},\eta_{j}) \displaystyle=\sum_{p=0}^{N}D_{i,p}\,U_{p,j}, \displaystyle\dfrac{\partial U}{\partial\eta}(\xi_{i},\eta_{j}) \displaystyle=\sum_{p=0}^{N}D_{j,p}\,U_{i,p}. The differentiation matrix satisfies the following standard properties. Lemma 2.1 (Properties of D_{i,j} ) . • Summation-by-parts (SBP) property: (23) w_{i}D_{i,j}+w_{j}D_{j,i}=\delta_{N,i}\delta_{N,j}-\delta_{0,i}\delta_{0,j}. • Summation identity: (24) \sum_{j=0}^{N}D_{i,j}=0. The SBP property is the discrete analogue of integration by parts and is central in proving entropy stability. Remark 2.1 (Discrete metric identities) . At the continuous level, metric identities ( 15 ) hold whenever the mapping is sufficiently smooth. At the discrete level, metric identities are not automatically satisfied and must be enforced through a compatible discretization of the geometric terms. One convenient form is (25) \displaystyle\sum_{p_{2}=0}^{N}D_{q_{2},p_{2}}(y_{\xi})_{q_{1},p_{2}} \displaystyle=\sum_{p_{1}=0}^{N}D_{q_{1},p_{1}}(y_{\eta})_{p_{1},q_{2}},\qquad\forall\,q_{1},q_{2}, \displaystyle\sum_{p_{2}=0}^{N}D_{q_{2},p_{2}}(x_{\xi})_{q_{1},p_{2}} \displaystyle=\sum_{p_{1}=0}^{N}D_{q_{1},p_{1}}(x_{\eta})_{p_{1},q_{2}},\qquad\forall\,q_{1},q_{2}, where (\cdot)_{i,j} denotes nodal DOFs of the corresponding geometric derivatives. If the coordinate mapping (x(\xi,\eta),y(\xi,\eta)) belongs to \mathbb{Q}_{N}(\Omega_{\mathrm{ref}}) , then the discrete metric identities ( 25 ) are satisfied automatically when the geometric terms are evaluated using the same LGL interpolation and differentiation operators; see Kopriva 46 for details. 2.4. LGL collocation-based quadrature on the reference element Let \{w_{i}\}_{i=0}^{N} denotes the LGL quadrature weights on the interval [-1,1] . On the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} , tensor-product LGL quadrature yields the following approximation of volume integrals: (26) \int_{\Omega_{\mathrm{ref}}}u\,v\,d\xi\,d\eta\;\approx\;(u,v)_{\Omega_{\mathrm{ref}},w}:=\sum_{q_{1}=0}^{N}\sum_{q_{2}=0}^{N}w_{q_{1}}w_{q_{2}}\,u_{q_{1},q_{2}}\,v_{q_{1},q_{2}}. Boundary integrals on \partial\Omega_{\mathrm{ref}} are approximated using one-dimensional LGL quadrature applied independently on each face. We define the discrete boundary inner product (27) \langle u,v\rangle_{\partial\Omega_{\mathrm{ref}},w}:=\sum_{\gamma\subset\partial\Omega_{\mathrm{ref}}}\sum_{q=0}^{N}w_{q}\,u|_{\gamma,q}\,v|_{\gamma,q}, where \gamma denotes one of the four faces of \Omega_{\mathrm{ref}} , and u|_{\gamma,q} , v|_{\gamma,q} denote the evaluation of u and v at the q th LGL node on face \gamma . Equivalently, writing the contributions from the four faces explicitly, \displaystyle\langle u,v\rangle_{\partial\Omega_{\mathrm{ref}},w} \displaystyle=\sum_{q=0}^{N}w_{q}\Big(u(-1,\eta_{q})v(-1,\eta_{q})+u(1,\eta_{q})v(1,\eta_{q}) (28) \displaystyle\qquad\qquad\quad+u(\xi_{q},-1)v(\xi_{q},-1)+u(\xi_{q},1)v(\xi_{q},1)\Big). The discrete inner products (\cdot,\cdot)_{\Omega_{\mathrm{ref}},w} and \langle\cdot,\cdot\rangle_{\partial\Omega_{\mathrm{ref}},w} are used throughout to approximate volume and surface integrals on the reference element. 3. Entropy stable DGSEM on Curvilinear Meshes In this section we describe the discontinuous Galerkin spectral element method (DGSEM) on curvilinear quadrilateral meshes. We first present the standard strong-form DGSEM discretization with LGL quadrature rules, which will serve as the baseline scheme. Next, this formulation will be modified using entropy conserving volume flux to obtain an entropy-stable DG method. Throughout this section, the spatial domain \Omega is decomposed into conforming non-overlapping curved quadrilateral elements \Omega_{h}=\{\Omega_{e}\}_{e=1}^{N_{e}} , each mapped to the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} . All discretizations are defined elementwise; coupling between elements is achieved through numerical fluxes at shared interfaces. 3.1. Strong-form DGSEM on curvilinear meshes We discretize the mapped Euler equations ( 13 ) on each reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} , using the contravariant flux formulation introduced in ( 14 ). Throughout this section, quantities superscripted by (\cdot)^{e} are understood to be local to the physical element \Omega_{e} . The standard nodal DG weak formulation on each element reads as follows: find \bm{U}_{N}^{e}=(U_{1}^{e},U_{2}^{e},U_{3}^{e},U_{4}^{e})^{T}\in[\mathbb{Q}_{N}(\Omega_{\mathrm{ref}})]^{4} such that, for k=1,2,3,4 , (29) \int_{\Omega_{\mathrm{ref}}}\mathcal{J}^{e}\,\partial_{t}U_{k}^{e}\,\hat{\Phi}\,d\xi d\eta-\int_{\Omega_{\mathrm{ref}}}\tilde{f}_{k}^{e}\,\partial_{\xi}\hat{\Phi}\,d\xi d\eta-\int_{\Omega_{\mathrm{ref}}}\tilde{g}_{k}^{e}\,\partial_{\eta}\hat{\Phi}\,d\xi d\eta+\int_{\partial\Omega_{\mathrm{ref}}}(\tilde{f}_{k}^{e,*},\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}}\,\hat{\Phi}\,d\hat{s}=0, for all test functions \hat{\Phi}(\xi,\eta)\in\mathbb{Q}_{N}(\Omega_{\mathrm{ref}}) . Here \hat{\bm{n}} denotes the outward unit normal vector on the reference boundary \partial\Omega_{\mathrm{ref}} , and \tilde{f}_{k}^{e,*} , \tilde{g}_{k}^{e,*} are the contravariant numerical fluxes of the form (30) \tilde{f}_{k}^{e,*}=y_{\eta}^{e}f_{k}^{*}-x_{\eta}^{e}g_{k}^{*},\qquad\tilde{g}_{k}^{e,*}=-y_{\xi}^{e}f_{k}^{*}+x_{\xi}^{e}g_{k}^{*}, with the numerical flux \bm{F}_{k}^{*}=(f_{k}^{*},g_{k}^{*})^{T} on the physical element \Omega_{e} , to be specified below. The physical conservative variables U_{k}(x^{e},y^{e}) are recovered from U_{k}^{e}(\xi,\eta) via the pull-back mapping ( 19 ). Applying integration by parts to ( 29 ) yields the equivalent strong form (31) \int_{\Omega_{\mathrm{ref}}}\mathcal{J}^{e}\,\partial_{t}U_{k}^{e}\,\hat{\Phi}\,d\xi d\eta+\int_{\Omega_{\mathrm{ref}}}\big(\partial_{\xi}\tilde{f}_{k}^{e}+\partial_{\eta}\tilde{g}_{k}^{e}\big)\,\hat{\Phi}\,d\xi d\eta-\int_{\partial\Omega_{\mathrm{ref}}}(\tilde{f}_{k}^{e}-\tilde{f}_{k}^{e,*},\tilde{g}_{k}^{e}-\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}}\,\hat{\Phi}\,d\hat{s}=0. Next, we approximate the flux functions by polynomial interpolants (32) \displaystyle\tilde{f}_{k}^{e}\approx\tilde{f}_{k,N}^{e}=\sum_{i=0}^{N}\sum_{j=0}^{N}(\tilde{f}_{k}^{e})_{i,j}\phi_{i}(\xi)\phi_{j}(\eta),\quad\tilde{g}_{k}^{e}\approx\tilde{g}_{k,N}^{e}=\sum_{i=0}^{N}\sum_{j=0}^{N}(\tilde{g}_{k}^{e})_{i,j}\phi_{i}(\xi)\phi_{j}(\eta), where the nodal contravariant flux values are computed via ( 14 ). For example, (\tilde{f}_{k}^{e})_{i,j}=(y^{e}_{\eta})_{i,j}f_{k}\big((\bm{U}_{N}^{e})_{i,j}\big)-(x^{e}_{\eta})_{i,j}g_{k}\big((\bm{U}_{N}^{e})_{i,j}\big). Next, evaluating the integrals in ( 31 ) using the tensor-product LGL quadrature rules ( 26 ) and ( 27 ) yields the semidiscrete DGSEM scheme (33) \left(\mathcal{J}^{e}\,\partial_{t}U_{k}^{e},\hat{\Phi}\right)_{\Omega_{\mathrm{ref}},w}+\left(\big(\partial_{\xi}\tilde{f}_{k,N}^{e}+\partial_{\eta}\tilde{g}_{k,N}^{e}\big),\hat{\Phi}\right)_{\Omega_{\mathrm{ref}},w}-\left\langle(\tilde{f}_{k,N}^{e}-\tilde{f}_{k}^{e,*},\tilde{g}_{k,N}^{e}-\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}},\hat{\Phi}\right\rangle_{\partial\Omega_{\mathrm{ref}},w}=0. To motivate the definition of the numerical flux \bm{F}_{k}^{*} , it is convenient to push forward the reference boundary integral \left\langle(\tilde{f}_{k}^{e,*},\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}},\hat{\Phi}\right\rangle_{\partial\Omega_{\mathrm{ref}},w} to the physical element boundary \partial\Omega_{e} . By definition ( 30 ), we obtain (34) \displaystyle\left\langle(\tilde{f}_{k}^{e,*},\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}},\hat{\Phi}\right\rangle_{\partial\Omega_{\mathrm{ref}}} \displaystyle=\int_{\partial\Omega_{\mathrm{ref}}}\bm{F}_{k}^{*}\cdot\bigl(\mathcal{J}^{e}(\mathcal{G}^{e})^{-T}\hat{\bm{n}}\bigr)\,\hat{\Phi}\,d\hat{s}=\int_{\partial\Omega_{e}}\bm{F}_{k}^{*}\cdot\bm{n}\,\Phi\,ds, which is the corresponding physical-edge integral. Here \hat{\Phi}(\xi,\eta)=\Phi(x(\xi,\eta),y(\xi,\eta)) denotes the standard pull-back of the physical test function to the reference element, and \mathcal{G}^{e}:=\begin{pmatrix}\partial_{\xi}x&\partial_{\xi}y\\ \partial_{\eta}x&\partial_{\eta}y\end{pmatrix} is the Jacobian matrix of the mapping from reference element \Omega_{\mathrm{ref}} to physical element \Omega_{e} . The vector \mathcal{J}^{e}(\mathcal{G}^{e})^{-T}\hat{\bm{n}} represents the scaled outward normal on the physical edge and satisfies the normal-measure identity \bigl(\mathcal{J}^{e}(\mathcal{G}^{e})^{-T}\hat{\bm{n}}\bigr)\,d\hat{s}=\bm{n}\,ds. Using the discrete boundary inner product defined in ( 27 ), the numerical flux term is approximated by (35) \displaystyle\left\langle(\tilde{f}_{k}^{e,*},\tilde{g}_{k}^{e,*})\cdot\hat{\bm{n}},\hat{\Phi}\right\rangle_{\partial\Omega_{\mathrm{ref}}}=\sum_{\gamma\subset\partial\Omega_{\mathrm{ref}}}\sum_{q=0}^{N}w_{q}\,\left.\Bigl(\bm{F}_{k}^{*}\cdot\bigl(\mathcal{J}^{e}(\mathcal{G}^{e})^{-T}\hat{\bm{n}}\bigr)\,\hat{\Phi}\Bigr)\right|_{\gamma,q}, which approximates the physical boundary integral \int_{\partial\Omega_{e}}\bm{F}_{k}^{*}\cdot\bm{n}\,\Phi\,ds . Hence, to evaluate the integral ( 35 ), it remains to define the numerical flux in the normal direction on each physical edge. Let E=\partial\Omega_{L}\cap\partial\Omega_{R} be an interior edge shared by two elements \Omega_{L} and \Omega_{R} . Denote by \bm{U}_{L} and \bm{U}_{R} the traces of the conservative state on the two sides of E , and let \bm{n}=(n_{x},n_{y}) be the unit normal vector on E , oriented from \Omega_{L} to \Omega_{R} . The normal numerical flux is chosen as the local Lax–Friedrichs (Rusanov) flux, defined componentwise by (36) \bm{F}_{k}^{*}\cdot\bm{n}=\frac{1}{2}\Big(\bm{n}\cdot\bm{F}_{k}(\bm{U}_{L})+\bm{n}\cdot\bm{F}_{k}(\bm{U}_{R})\Big)-\frac{\alpha}{2}\Big((U_{k})_{R}-(U_{k})_{L}\Big), where the dissipation parameter \alpha is taken as (37) \displaystyle\alpha=\max\bigl\{|\bm{u}_{L}\cdot\bm{n}|+c_{L},\;|\bm{u}_{R}\cdot\bm{n}|+c_{R}\bigr\}, where \bm{u}_{L/R} and c_{L/R} denote the velocity vector and sound speed evaluated at the left and right states, respectively. Choosing the test function in ( 33 ) as \hat{\Phi}=\phi_{p_{1}}(\xi)\phi_{p_{2}}(\eta) and evaluating the resulting terms yields the nodal (collocation) form of the scheme: (38) \displaystyle w_{p_{1}}w_{p_{2}}\mathcal{J}_{p_{1},p_{2}}^{e}\,(\partial_{t}U_{k}^{e})_{p_{1},p_{2}}+w_{p_{1}}w_{p_{2}}\sum_{i=0}^{N}D_{p_{1},i}\,(\tilde{f}_{k}^{e})_{i,p_{2}}+w_{p_{1}}w_{p_{2}}\sum_{j=0}^{N}D_{p_{2},j}\,(\tilde{g}_{k}^{e})_{p_{1},j} \displaystyle+w_{p_{1}}\Bigl((\Delta\tilde{g}_{k}^{e})_{p_{1},0}\,\delta_{p_{2},0}-(\Delta\tilde{g}_{k}^{e})_{p_{1},N}\,\delta_{p_{2},N}\Bigr)+w_{p_{2}}\Bigl((\Delta\tilde{f}_{k}^{e})_{0,p_{2}}\,\delta_{p_{1},0}-(\Delta\tilde{f}_{k}^{e})_{N,p_{2}}\,\delta_{p_{1},N}\Bigr)=0, for all 0\leq p_{1},p_{2}\leq N and k=1,2,3,4 , where \Delta\tilde{f}_{k}^{e}=\tilde{f}_{k}^{e}-\tilde{f}_{k}^{e,*} and \Delta\tilde{g}_{k}^{e}=\tilde{g}_{k}^{e}-\tilde{g}_{k}^{e,*} . The strong-form DGSEM on curvilinear meshes is defined by the semidiscrete scheme ( 33 ) together with the local Lax–Friedrichs numerical flux ( 36 ). This formulation serves as the baseline DGSEM and provides the foundation for the entropy-stable modifications introduced in the following subsection. 3.2. Entropy stable DGSEM The strong-form DGSEM discretization introduced in the previous subsection is conservative and high-order accurate, but it does not satisfy a discrete entropy conservation or entropy stability property. In particular, the pointwise evaluation of nonlinear fluxes in the volume terms of ( 33 ) prevents the scheme from mimicking the continuous entropy balance, even when entropy-stable numerical fluxes are used at element interfaces. To obtain an entropy-stable formulation, we follow the entropy framework of Tadmor 68 ; 69 and exploit the flexibility of nodal DG methods to modify the volume discretization . The key idea is to replace the pointwise fluxes in the volume integrals of ( 33 ) by symmetric two-point numerical fluxes that are entropy conservative at the discrete level; see, e.g. 8 ; 9 . We first recall the definition of an entropy-conservative two-point flux. Definition 3.1 . A two-point numerical volume flux \bm{F}^{\#}(\bm{U}_{L},\bm{U}_{R})=\big(\bm{f}^{\#}(\bm{U}_{L},\bm{U}_{R}),\bm{g}^{\#}(\bm{U}_{L},\bm{U}_{R})\big) is said to be entropy conservative for the physical flux \bm{F}(\bm{U})=(\bm{f}(\bm{U}),\bm{g}(\bm{U})) if it satisfies: • Consistency: \bm{F}^{\#}(\bm{U},\bm{U})=\bm{F}(\bm{U}) ; • Symmetry: \bm{F}^{\#}(\bm{U}_{L},\bm{U}_{R})=\bm{F}^{\#}(\bm{U}_{R},\bm{U}_{L}) ; • Entropy conservation: (39) (\bm{V}_{R}-\bm{V}_{L})\cdot\bm{F}^{\#}(\bm{U}_{L},\bm{U}_{R})=\bm{\psi}_{R}-\bm{\psi}_{L}, where \bm{V} and \bm{\psi}=(\psi^{f},\psi^{g}) denote the entropy variables and entropy potential fluxes ( 12 ) associated with the entropy function ( 11 ). For the Euler equations, several entropy-conservative two-point fluxes have been proposed in the literature, including the fluxes of Ismail and Roe 42 and Chandrashekar 13 . In this work, we adopt the entropy-conservative flux introduced by Chandrashekar 13 , which is also kinetic-energy preserving. Its components are given by (40) \displaystyle f_{1}^{\#}=\rho^{\log}\{\!\{u\}\!\}, \displaystyle g_{1}^{\#}=\rho^{\log}\{\!\{v\}\!\}, \displaystyle f_{2}^{\#}=\rho^{\log}\{\!\{u\}\!\}^{2}+\hat{p}, \displaystyle g_{2}^{\#}=\rho^{\log}\{\!\{u\}\!\}\{\!\{v\}\!\}, \displaystyle f_{3}^{\#}=\rho^{\log}\{\!\{u\}\!\}\{\!\{v\}\!\}, \displaystyle g_{3}^{\#}=\rho^{\log}\{\!\{v\}\!\}^{2}+\hat{p}, \displaystyle f_{4}^{\#}=\rho^{\log}\{\!\{u\}\!\}\hat{h}, \displaystyle g_{4}^{\#}=\rho^{\log}\{\!\{v\}\!\}\hat{h}, where f_{k}^{\#} and g_{k}^{\#} denote the components of the numerical fluxes \bm{f}^{\#} and \bm{g}^{\#} , respectively. The arithmetic and logarithmic averages appearing above are defined by (41) \{\!\{u\}\!\}=\frac{u_{L}+u_{R}}{2},\qquad u^{\log}=\frac{u_{L}-u_{R}}{\log(u_{L})-\log(u_{R})}, and the averaged pressure and enthalpy are given by (42) \displaystyle\hat{p}=\frac{\{\!\{\rho\}\!\}}{2\{\!\{\beta\}\!\}},\quad\hat{h} \displaystyle=\frac{1}{2\beta^{\log}(\gamma-1)}-\frac{1}{2}\big(\{\!\{u\}\!\}^{2}+\{\!\{v\}\!\}^{2}\big)+\frac{\hat{p}}{\rho^{\log}}+\{\!\{u\}\!\}^{2}+\{\!\{v\}\!\}^{2}, where \beta=\frac{\rho}{2p}. Since the entropy-conservative volume fluxes are defined in a two-point fashion, the geometric terms in the contravariant fluxes must be discretized consistently. Following 73 , all metric coefficients are replaced by symmetric arithmetic averages, e.g., (43) \{\!\{x_{\xi}\}\!\}_{L,R}=\frac{1}{2}\big((x_{\xi})_{L}+(x_{\xi})_{R}\big). Using these averaged metric terms, the entropy-conservative contravariant volume fluxes are defined as (44) \displaystyle(\tilde{f}_{k}^{e,\#})_{(i,p_{1}),p_{2}} \displaystyle=\{\!\{y_{\eta}^{e}\}\!\}_{(i,p_{1}),p_{2}}(f_{k}^{\#})_{(i,p_{1}),p_{2}}-\{\!\{x_{\eta}^{e}\}\!\}_{(i,p_{1}),p_{2}}(g_{k}^{\#})_{(i,p_{1}),p_{2}}, (45) \displaystyle(\tilde{g}_{k}^{e,\#})_{p_{1},(j,p_{2})} \displaystyle=-\{\!\{y_{\xi}^{e}\}\!\}_{p_{1},(j,p_{2})}(f_{k}^{\#})_{p_{1},(j,p_{2})}+\{\!\{x_{\xi}^{e}\}\!\}_{p_{1},(j,p_{2})}(g_{k}^{\#})_{p_{1},(j,p_{2})}. The entropy-stable DGSEM is obtained by replacing the volume fluxes in ( 33 ) with the entropy-conservative fluxes ( 44 ). Specifically, for each element \Omega_{e} , we seek an approximatate solution \bm{U}_{N}^{e}=(U_{1}^{e},U_{2}^{e},U_{3}^{e},U_{4}^{e})^{T}\in[\mathbb{Q}_{N}(\Omega_{\mathrm{ref}})]^{4} such that for all 0\leq p_{1},p_{2}\leq N and k=1,\dots,4 , the following semi-discrete formulation holds: (46) \displaystyle w_{p_{1}}w_{p_{2}}\left(\mathcal{J}_{p_{1},p_{2}}^{e}\,(\partial_{t}U_{k}^{e})_{p_{1},p_{2}}+2\sum_{i=0}^{N}D_{p_{1},i}\,(\tilde{f}_{k}^{e,\#})_{(i,p_{1}),p_{2}}+2\sum_{j=0}^{N}D_{p_{2},j}\,(\tilde{g}_{k}^{e,\#})_{p_{1},(j,p_{2})}\right) \displaystyle+w_{p_{1}}\Bigl((\Delta\tilde{g}_{k}^{e})_{p_{1},0}\,\delta_{p_{2},0}-(\Delta\tilde{g}_{k}^{e})_{p_{1},N}\,\delta_{p_{2},N}\Bigr)+w_{p_{2}}\Bigl((\Delta\tilde{f}_{k}^{e})_{0,p_{2}}\,\delta_{p_{1},0}-(\Delta\tilde{f}_{k}^{e})_{N,p_{2}}\,\delta_{p_{1},N}\Bigr)=0. The factor of 2 arises from the symmetric split-form discretization and, together with the SBP property of the differentiation matrices, ensures that the discrete entropy balance mirrors the continuous entropy identity. The fundamental properties of the resulting entropy-stable DGSEM are summarized below. Lemma 3.1 (Single-element analysis) . Let \{\bm{U}_{N}^{e}\}_{e} denote the numerical solution of the entropy-stable DGSEM ( 46 ). On a single element \Omega_{e} , the discrete evolution of the conserved variables satisfies the following relations: for k=1,2,3,4 , (47) \displaystyle\sum_{p_{1},p_{2}=0}^{N}w_{p_{1}}w_{p_{2}}\,\mathcal{J}_{p_{1},p_{2}}^{e}\,(\partial_{t}U_{k}^{e})_{p_{1},p_{2}}={} \displaystyle\sum_{p_{1}=0}^{N}w_{p_{1}}\Bigl((\tilde{g}_{k}^{e,*})_{p_{1},0}-(\tilde{g}_{k}^{e,*})_{p_{1},N}\Bigr) \displaystyle+\sum_{p_{2}=0}^{N}w_{p_{2}}\Bigl((\tilde{f}_{k}^{e,*})_{0,p_{2}}-(\tilde{f}_{k}^{e,*})_{N,p_{2}}\Bigr). Moreover, the discrete entropy evolves according to (48) \displaystyle\sum_{p_{1},p_{2}=0}^{N}w_{p_{1}}w_{p_{2}}\,\mathcal{J}_{p_{1},p_{2}}^{e}\,\bigl(\partial_{t}\eta(\bm{U}_{N}^{e})\bigr)_{p_{1},p_{2}}={} \displaystyle\sum_{p_{1}=0}^{N}\sum_{k=1}^{4}w_{p_{1}}\Bigl((\tilde{g}_{k}^{e,*})_{p_{1},0}(V_{k}^{e})_{p_{1},0}-\tilde{\psi}^{e,g}_{p_{1},0}\Bigr) \displaystyle-\sum_{p_{1}=0}^{N}\sum_{k=1}^{4}w_{p_{1}}\Bigl((\tilde{g}_{k}^{e,*})_{p_{1},N}(V_{k}^{e})_{p_{1},N}-\tilde{\psi}^{e,g}_{p_{1},N}\Bigr) \displaystyle+\sum_{p_{2}=0}^{N}\sum_{k=1}^{4}w_{p_{2}}\Bigl((\tilde{f}_{k}^{e,*})_{0,p_{2}}(V_{k}^{e})_{0,p_{2}}-\tilde{\psi}^{e,f}_{0,p_{2}}\Bigr) \displaystyle-\sum_{p_{2}=0}^{N}\sum_{k=1}^{4}w_{p_{2}}\Bigl((\tilde{f}_{k}^{e,*})_{N,p_{2}}(V_{k}^{e})_{N,p_{2}}-\tilde{\psi}^{e,f}_{N,p_{2}}\Bigr). Here, the entropy variables are defined by (V_{k}^{e})_{p_{1},p_{2}}=\left(\frac{\partial\eta}{\partial U_{k}}(\bm{U}_{N}^{e})\right)_{p_{1},p_{2}},\qquad k=1,\dots,4, and the contravariant mapped entropy potentials are given by \tilde{\psi}^{e,f}_{p_{1},p_{2}}:=(y_{\eta}^{e})_{p_{1},p_{2}}\,\psi^{f}_{p_{1},p_{2}}-(x_{\eta}^{e})_{p_{1},p_{2}}\,\psi^{g}_{p_{1},p_{2}},\qquad\tilde{\psi}^{e,g}_{p_{1},p_{2}}:=-(y_{\xi}^{e})_{p_{1},p_{2}}\,\psi^{f}_{p_{1},p_{2}}+(x_{\xi}^{e})_{p_{1},p_{2}}\,\psi^{g}_{p_{1},p_{2}}. Proof. The proof closely follows the arguments presented in 26 ; 25 ; 73 ; 28 . For completeness, the proof adapted to the present notation is provided in the Appendix( ). ∎ Theorem 3.2 (Multi-element entropy analysis) . Consider the Euler system ( 5 ) equipped with periodic boundary conditions, and let \{\bm{U}_{N}^{e}\}_{e} denote the solution of the entropy-stable DGSEM ( 46 ). Assume that the numerical interface flux ( 36 ) is entropy stable in the sense that (49) (\bm{V}_{R}-\bm{V}_{L})\cdot\bigl(\bm{F}^{*}(\bm{U}_{L},\bm{U}_{R})\cdot\bm{n}\bigr)-(\bm{\psi}_{R}-\bm{\psi}_{L})\cdot\bm{n}\leq 0, where the unit normal vector \bm{n} points from the left state to the right state. Then the DGSEM is entropy stable on the whole computational domain, i.e., (50) \sum_{e=1}^{N_{e}}\sum_{p_{1},p_{2}=0}^{N}w_{p_{1}}w_{p_{2}}\,\mathcal{J}_{p_{1},p_{2}}^{e}\,\bigl(\partial_{t}\eta(\bm{U}_{N}^{e})\bigr)_{p_{1},p_{2}}\leq 0. Proof. Using the mapping relation ( 34 ), the single-element entropy balance ( 48 ) can be expressed in the physical domain as (\eta(\bm{U}^{e}),1)_{\Omega_{e},h}=-\left\langle\sum_{k=1}^{4}\bigl(\bm{F}_{k}^{*}\cdot\bm{n}\bigr)V_{k}-\bm{\psi}\cdot\bm{n},\,1\right\rangle_{\partial\Omega_{e},h}, where (\cdot,\cdot)_{\Omega_{e},h} denotes the mapped LGL quadrature on the physical element \Omega_{e} , and \langle\cdot,\cdot\rangle_{\partial\Omega_{e},h} denotes the corresponding mapped LGL quadrature on the element boundary \partial\Omega_{e} . Summing over all elements \{\Omega_{e}\}_{e=1}^{N_{e}} and invoking periodic boundary conditions yields \sum_{e=1}^{N_{e}}(\eta(\bm{U}^{e}),1)_{\Omega_{e},h}=\sum_{E\in\mathcal{E}_{h}^{o}}\left\langle(\bm{V}_{R}-\bm{V}_{L})\cdot\bigl(\bm{F}^{*}(\bm{U}_{L},\bm{U}_{R})\cdot\bm{n}\bigr)-(\bm{\psi}_{R}-\bm{\psi}_{L})\cdot\bm{n},\,1\right\rangle_{E,h}, where \mathcal{E}_{h}^{o} denotes the set of interior interfaces of the mesh \Omega_{h} . Here, \bm{U}_{L/R} , \bm{V}_{L/R} , and \bm{\psi}_{L/R} denote the left and right traces of the conservative variables, entropy variables, and entropy potentials, respectively, on an interface E . By the entropy stability assumption ( 49 ) on the numerical flux, each interface contribution on the right-hand side is non-positive. Consequently, the global discrete entropy inequality ( 50 ) holds, which completes the proof. ∎ Remark 3.1 (Entropy stability of Lax–Friedrichs flux) . The local Lax–Friedrichs flux ( 36 ) is entropy stable provided that the dissipation parameter \alpha is no smaller than the maximum wave speed of the exact Riemann problem at the interface; see 14 for a detailed discussion. Since computing the exact wave speed is nontrivial 38 , we instead adopt the practical wave-speed estimate given in ( 37 ). While this choice cannot be theoretically proven to be entropy stable in the sense of ( 49 ), it has been observed to behave in an entropy-stable manner in practice. We write the semidiscrete entropy-stable DGSEM formulation ( 46 ) in the abstract form (51) \frac{d\bm{U}_{h}}{dt}=\bm{L}_{h}(\bm{U}_{h}), where the solution \bm{U}_{h}\in[V_{h}]^{4} , and V_{h} is the global discontinuous finite element space defined by V_{h}:=\left\{v\in L^{2}(\Omega)\;:\;\left.v\right|_{\Omega^{e}}\circ\bm{\Phi}^{e}\in\mathbb{Q}_{N}(\Omega_{\mathrm{ref}}),\quad\forall\Omega^{e}\in\Omega_{h}\right\}. Here, \bm{\Phi}^{e}:\Omega_{\mathrm{ref}}\to\Omega^{e} denotes the element mapping. The operator \bm{L}_{h}(\cdot) represents the spatial discretization defined by the entropy-stable DGSEM formulation. To advance the semidiscrete system ( 51 ) in time, we employ the third-order strong stability preserving Runge–Kutta (SSP-RK3) method 35 . Given the numerical solution \bm{U}_{h}^{n} at time level t^{n} , the solution at the next time level t^{n+1}=t^{n}+\Delta t is obtained through the following stages: (52) \displaystyle\bm{U}_{h}^{(1)}=\bm{U}_{h}^{n}+\Delta t\,\bm{L}_{h}(\bm{U}_{h}^{n}), \displaystyle\bm{U}_{h}^{(2)}=\dfrac{3}{4}\bm{U}_{h}^{n}+\dfrac{1}{4}\bm{U}_{h}^{(1)}+\dfrac{\Delta t}{4}\bm{L}_{h}(\bm{U}_{h}^{(1)}), \displaystyle\bm{U}_{h}^{(3)}=\dfrac{1}{3}\bm{U}_{h}^{n}+\dfrac{2}{3}\bm{U}_{h}^{(2)}+\dfrac{2\Delta t}{3}\bm{L}_{h}(\bm{U}_{h}^{(2)}), \displaystyle\bm{U}_{h}^{n+1}=\bm{U}_{h}^{(3)}. Remark 3.2 (Positivity preservation) . Due to the use of the Lax–Friedrichs numerical flux ( 36 ) in the scheme ( 46 ), it can be shown that each stage of the above Runge–Kutta method preserves the positivity of the cell averages of density and pressure under a standard CFL-type time step restriction, following the work of Zhang and Shu 77 ; see also 14 . Consequently, a positivity-preserving scaling limiter 77 can be applied to enforce the positivity of density and pressure at all nodal degrees of freedom. 4. Oscillation-Eliminating DG (OEDG) As discussed in the introduction, high-order discontinuous Galerkin approximations may exhibit spurious oscillations in the vicinity of discontinuities. To mitigate these nonphysical oscillations while preserving high-order accuracy in smooth regions, we use the oscillation-eliminating (OE) procedure applied in a post-processing fashion 59 . Let \mathbb{Q}_{N}(\Omega_{e}):=\{v\in L^{2}(\Omega_{e}):v\circ\bm{\Phi}^{e}\in\mathbb{Q}_{N}(\Omega_{ref})\} denote the mapped tensor-product polynomial space of degree N on the physical element \Omega_{e} . We define an element-wise linear operator \mathcal{F}_{\tau}^{e}:\mathbb{Q}_{N}(\Omega_{e})\longrightarrow\mathbb{Q}_{N}(\Omega_{e}), which acts on each component of the DG solution independently. For a solution vector \bm{U}_{h}^{e} restricted to an element \Omega_{e} , we denote by U_{\sigma}^{e,k}(\hat{t})=\mathcal{F}_{\hat{t}}^{e}(U_{h}^{e,k}) the OE-processed solution associated with the k -th component, k=1,\dots,4 , where \hat{t} is a pseudo time. The operator \mathcal{F}_{\hat{t}}^{e} is defined as the solution of the following initial value problem: for any element \Omega_{e} and each component k=1,\dots,4 , (53) \left\{\begin{aligned} &\frac{d}{d\hat{t}}\int_{\Omega_{e}}U_{\sigma}^{e,k}\,v\,d\bm{x}+\sum_{m=0}^{N}\delta_{m}^{(e)}(\bm{U}_{h}^{e})\int_{\Omega_{e}}\bigl(U_{\sigma}^{e,k}-P^{m-1}U_{\sigma}^{e,k}\bigr)v\,d\bm{x}=0,\quad\forall v\in\mathbb{Q}_{N}(\Omega_{e}),\\ &U_{\sigma}^{e,k}(\hat{t}=0)=U_{h}^{e,k}.\end{aligned}\right. Here \{\delta_{m}^{(e)}(\bm{U}_{h}^{e})\}_{m=0}^{N} are nonnegative strength factors that control the amount of modal damping at different polynomial levels; their precise definition will be given later. P^{m}w\in\mathbb{Q}_{m}(\Omega_{e}) denotes the L^{2} projection onto the polynomial space \mathbb{Q}_{m}(\Omega_{e}) for 0\leq m\leq N-1 , defined by (54) \displaystyle\int_{\Omega_{e}}(P^{m}w-w)\,v\,d\bm{x}=0,\quad\forall v\in\mathbb{Q}_{m}(\Omega_{e}), and we set P^{-1}:=P^{0} for notational convenience. The evolution problem ( 53 ) is linear and can be solved exactly, making the OE procedure computationally efficient. The specific implementation of the OE operator differs between Cartesian meshes and general curvilinear meshes due to the presence of metric terms. These two cases will be discussed separately in the following subsections. 4.1. OEDG on Cartesian Grids We first consider the implementation of the OE procedure on Cartesian meshes, where orthogonal modal bases can be exploited to obtain a closed-form expression of the operator \mathcal{F}_{\hat{t}} . The presentation follows the general framework of 59 , with several modifications tailored to the Cartesian setting. Let \{\psi_{i}(\xi)\}_{i=0}^{N} denote a set of normalized orthogonal polynomials on [-1,1] , such as normalized Legendre polynomials. A tensor-product orthogonal basis on the reference element \Omega_{\mathrm{ref}}=[-1,1]^{2} is then given by \Psi_{i,j}(\xi,\eta):=\psi_{i}(\xi)\psi_{j}(\eta),\qquad 0\leq i,j\leq N. Using this modal basis, the OE-processed solution U_{\sigma}^{e,k} defined by ( 53 ) can be expanded as (55) U_{\sigma}^{e,k}(\hat{t},\xi,\eta)=\sum_{i,j=0}^{N}(\hat{U}_{\sigma}^{e,k})_{i,j}(\hat{t})\,\Psi_{i,j}\bigl(\xi,\eta\bigr), where the expansion is performed on the reference element, and the coordinate mapping (x^{e}(\xi),y^{e}(\eta)) is omitted for brevity. Due to the hierarchical structure of orthogonal polynomial spaces, the difference between U_{\sigma}^{e,k} and its L^{2} projection onto \mathbb{Q}_{m-1} admits the representation (56) U_{\sigma}^{e,k}-P^{m-1}U_{\sigma}^{e,k}=\sum_{\max(i,j)\geq\max\{m,1\}}(\hat{U}_{\sigma}^{e,k})_{i,j}(\hat{t})\,\Psi_{i,j},\qquad m\geq 1. Substituting ( 56 ) into ( 53 ) and choosing the test function v=\Psi_{i,j} yields a decoupled system of ordinary differential equations for the modal coefficients: (57) \displaystyle\frac{d}{d\hat{t}}(\hat{U}_{\sigma}^{e,k})_{i,j}+\Bigl(\sum_{m=0}^{\max(i,j)}\delta_{m}^{(e)}\Bigr)(\hat{U}_{\sigma}^{e,k})_{i,j}=0,\qquad\forall\,\max(i,j)\geq 1, \displaystyle\frac{d}{d\hat{t}}(\hat{U}_{\sigma}^{e,k})_{0,0}=0. Evaluating the solution at pseudo time \hat{t}=\Delta t , the above system can be solved exactly as (58) \displaystyle(\hat{U}_{\sigma}^{e,k})_{i,j}(\Delta t) \displaystyle=\exp\!\Bigl(-\Delta t\sum_{m=0}^{\max(i,j)}\delta_{m}^{(e)}\Bigr)(\hat{U}_{h}^{e,k})_{i,j},\qquad\max(i,j)\geq 1, \displaystyle(\hat{U}_{\sigma}^{e,k})_{0,0}(\Delta t) \displaystyle=(\hat{U}_{h}^{e,k})_{0,0}. Consequently, the OE operator on Cartesian grids admits the explicit representation (59) \mathcal{F}_{\Delta t}(U_{h}^{e,k})=(\hat{U}_{h}^{e,k})_{0,0}\,\Psi_{0,0}+\sum_{\max(i,j)\geq 1}\exp\!\Bigl(-\Delta t\sum_{m=0}^{\max(i,j)}\delta_{m}^{(e)}\Bigr)(\hat{U}_{h}^{e,k})_{i,j}\,\Psi_{i,j}. We define the damping coefficients \delta_{m}^{(e)} by (60) \delta_{m}^{(e)}=\frac{\beta_{e}}{h_{e}}\sum_{f\in\partial\Omega_{e}}\sigma_{m}^{(f)}(\bm{U}_{h}^{e}), where \beta_{e} is an estimate of the local maximum wave speed on \Omega_{e} , and h_{e} denotes a characteristic element length scale, chosen as the radius of the inscribed circle. For the compressible Euler equations, we take \beta_{e}=\|\bar{\bm{u}}\|+\bar{c} , where \bar{\bm{u}} and \bar{c} are the cell-averaged velocity and speed of sound, respectively. The face-based indicator is defined as (61) \sigma_{m}^{(f)}(\bm{U}_{h}^{e})=\max_{1\leq k\leq d}\sigma_{m}^{(f)}(U_{h}^{e,k}),\qquad f\in\partial\Omega_{e}, with (62) \sigma_{m}^{(f)}(U_{h}^{e,k})=\begin{cases}0,&U_{h}^{e,k}=\bar{U}_{h}^{e,k},\\[5.16663pt] \dfrac{(2m+1)h_{e}^{m}}{2(2N-1)m!}\Biggl[\displaystyle\sum_{n\leq m}\dfrac{\frac{1}{|f|}\int_{f}\bigl|\llbracket\partial_{x}^{n}U_{h}^{e,k}\rrbracket_{f}\bigr|\,dS}{\|U_{h}^{e,k}-\bar{U}_{h}^{e,k}\|_{L^{\infty}(\Omega_{e})}}+\sum_{n\leq m}\dfrac{\frac{1}{|f|}\int_{f}\bigl|\llbracket\partial_{y}^{n}U_{h}^{e,k}\rrbracket_{f}\bigr|\,dS}{\|U_{h}^{e,k}-\bar{U}_{h}^{e,k}\|_{L^{\infty}(\Omega_{e})}}\Biggr],&\text{otherwise}.\end{cases} Remark 4.1 (OE scale factor s ) . In practice, the damping induced by ( 58 ) may be overly strong for certain problems. To improve accuracy, we introduce a scaling factor s\in(0,1) and replace the exponential factor in ( 58 ) by (63) \exp\!\Bigl(-s\,\Delta t\sum_{m=0}^{\max(i,j)}\delta_{m}^{(e)}\Bigr). and we will call it OE scale factor s in the following. Remark 4.2 (Conservation of OE procedure) . Since the modal coefficient (\hat{U}_{h}^{e,k})_{0,0} is left unchanged, the OE procedure preserves the cell average of each conserved variable, which is a crucial property for stability and conservation. Remark 4.3 (Modifications tailored to the Cartesian setting) . Unlike 59 , where directional derivatives in all orientations are employed, the Cartesian grid structure allows us to restrict ( 62 ) to derivatives aligned with the coordinate directions. 4.2. OEDG on Curvilinear Grids 4.2.1. Exact solution of ( 53 ) On general curvilinear meshes, constructing a local orthogonal modal basis on each element \Omega_{e} is impractical due to the metric terms. Nevertheless, the projection operators P^{m} defined in ( 54 ) remain well-defined on \Omega_{e} . We approximate the integrals in ( 54 ) using the LGL rule of degree N ( 26 ). We therefore derive an explicit expression for the OE operator \mathcal{F}_{\Delta t}^{e} using only the nested structure of polynomial spaces. Recall the hierarchy \mathbb{Q}_{0}(\Omega_{e})\subset\mathbb{Q}_{1}(\Omega_{e})\subset\cdots\subset\mathbb{Q}_{N}(\Omega_{e}). For any u\in\mathbb{Q}_{N}(\Omega_{e}) , define the incremental (projection-difference) components (64) u_{0}:=P^{0}u,\qquad\Delta_{k}:=P^{k}u-P^{k-1}u,\quad k=1,\dots,N, so that the telescoping decomposition holds: (65) u=u_{0}+\sum_{k=1}^{N}\Delta_{k}. Note that \Delta_{k}\in\mathbb{Q}_{k}(\Omega_{e}) and P^{k-1}\Delta_{k}=0 , hence \Delta_{k} lies in the complement \mathbb{W}_{k}:=\mathbb{Q}_{k}\ominus\mathbb{Q}_{k-1} in the L^{2} sense. The following lemmas summary some useful properties of \Delta_{k} . Lemma 4.1 . For each k=1,\dots,N , the increment \Delta_{k} is L^{2} -orthogonal to \mathbb{Q}_{k-1}(\Omega_{e}) , i.e., \int_{\Omega_{e}}\Delta_{k}\,v\,d\bm{x}=0,\qquad\forall v\in\mathbb{Q}_{k-1}(\Omega_{e}). Lemma 4.2 . For k=1,\dots,N and any m\geq 0 , (I-P^{m-1})\Delta_{k}=\begin{cases}0,&m-1\geq k,\\ \Delta_{k},&m\leq k,\end{cases}\qquad\text{and}\qquad(I-P^{m-1})u_{0}=0. Proof. Since \Delta_{k}=P^{k}u-P^{k-1}u and P^{m-1} is a projection, if m-1\geq k then P^{m-1}P^{k}u=P^{k}u and P^{m-1}P^{k-1}u=P^{k-1}u , hence P^{m-1}\Delta_{k}=\Delta_{k} and (I-P^{m-1})\Delta_{k}=0 . If m\leq k , then P^{m-1}P^{k}u=P^{m-1}u=P^{m-1}P^{k-1}u , so P^{m-1}\Delta_{k}=0 and (I-P^{m-1})\Delta_{k}=\Delta_{k} . Finally, u_{0}\in\mathbb{Q}_{0} implies P^{m-1}u_{0}=u_{0} for all m , hence (I-P^{m-1})u_{0}=0 . ∎ We now derive the explicit solution of the OE evolution ( 53 ). Consider a scalar component on \Omega_{e} and write u_{\sigma}(\hat{t})=\mathcal{F}_{\hat{t}}(u) . Substituting ( 65 ) into ( 53 ) and using Lemma 4.2 gives, for all v\in\mathbb{Q}_{N}(\Omega_{e}) , (66) \frac{d}{d\hat{t}}\int_{\Omega_{e}}\Bigl(u_{0}+\sum_{k=1}^{N}\Delta_{k}(\hat{t})\Bigr)v\,d\bm{x}+\sum_{k=1}^{N}\Bigl(\sum_{m=0}^{k}\delta_{m}^{(e)}(u)\Bigr)\int_{\Omega_{e}}\Delta_{k}(\hat{t})\,v\,d\bm{x}=0. The key observation is that ( 66 ) decouples across the nested subspaces. Fix \ell\in\{0,1,\dots,N\} and choose v\in\mathbb{Q}_{\ell}(\Omega_{e}) . By Lemma 4.1 , we have \int_{\Omega_{e}}\Delta_{k}v\,d\bm{x}=0 for all k\geq\ell+1 , hence ( 66 ) reduces to (67) \frac{d}{d\hat{t}}\int_{\Omega_{e}}\Bigl(u_{0}+\sum_{k=1}^{\ell}\Delta_{k}(\hat{t})\Bigr)v\,d\bm{x}+\sum_{k=1}^{\ell}\Bigl(\sum_{m=0}^{k}\delta_{m}^{(e)}(u)\Bigr)\int_{\Omega_{e}}\Delta_{k}(\hat{t})\,v\,d\bm{x}=0,\quad\forall v\in\mathbb{Q}_{\ell}(\Omega_{e}). Subtracting the same identity written for \ell-1 from that for \ell and using the fact that \mathbb{Q}_{\ell-1}\subset\mathbb{Q}_{\ell} yields an evolution equation on the increment subspace \mathbb{W}_{\ell} . Equivalently, ( 53 ) induces the following strong ODE for each increment \Delta_{\ell} : (68) \frac{d}{d\hat{t}}\Delta_{\ell}(\hat{t})+\Bigl(\sum_{m=0}^{\ell}\delta_{m}^{(e)}(u)\Bigr)\Delta_{\ell}(\hat{t})=0,\qquad\ell=1,\dots,N, together with \frac{d}{d\hat{t}}u_{0}=0 . Therefore, (69) u_{\sigma}(\Delta t)=u_{0}+\sum_{k=1}^{N}\exp\!\Bigl(-\Delta t\sum_{m=0}^{k}\delta_{m}^{(e)}(u)\Bigr)\,\Delta_{k}. In particular, the constant component u_{0}=P^{0}u (hence the cell average) is preserved exactly. Finally, for the Euler system on \Omega_{e} , the operator is applied component-wise. Denoting \bm{U}_{\sigma}^{e}=\mathcal{F}_{\Delta t}(\bm{U}_{h}^{e}) , we have for each component r=1,\dots,4 , (70) U_{\sigma}^{e,r}=P^{0}(U_{h}^{e,r})+\sum_{k=1}^{N}\exp\!\Bigl(-\Delta t\sum_{m=0}^{k}\delta_{m}^{(e)}(\bm{U}_{h}^{e})\Bigr)\,\bigl(P^{k}(U_{h}^{e,r})-P^{k-1}(U_{h}^{e,r})\bigr). 4.2.2. Damping coefficients The damping coefficients \delta_{m}^{(e)} appearing in ( 70 ) are constructed from face-based jump indicators. As in the Cartesian case, we first define for each face f\subset\partial\Omega_{e} , (71) \sigma_{m}^{(f)}(\bm{U}_{h}^{e})=\max_{1\leq r\leq 4}\sigma_{m}^{(f)}(U_{h}^{e,r}),\qquad f\in\partial\Omega_{e}, where U_{h}^{e,r} denotes the r -th component of the Euler state. For each scalar component U_{h}^{e,r} , we set (72) \sigma_{m}^{(f)}(U_{h}^{e,r})=\begin{cases}0,&U_{h}^{e,r}=\bar{U}_{h}^{e,r},\\[5.16663pt] \dfrac{(2m+1)\,h_{e}^{m}}{2(2N-1)\,m!}\displaystyle\sum_{|\bm{\alpha}|\leq m}\dfrac{\frac{1}{|f|}\int_{f}\Bigl|\llbracket\partial^{\bm{\alpha}}U_{h}^{e,r}\rrbracket_{f}\Bigr|\,dS}{\|U_{h}^{e,r}-\bar{U}_{h}^{e,r}\|_{L^{\infty}(\Omega_{e})}},&\text{otherwise},\end{cases} where \bm{\alpha}=(\alpha_{1},\alpha_{2}) is a multi-index with |\bm{\alpha}|=\alpha_{1}+\alpha_{2} , and \partial^{\bm{\alpha}}U:=\frac{\partial^{|\bm{\alpha}|}U}{\partial x^{\alpha_{1}}\,\partial y^{\alpha_{2}}}. All remaining quantities (jump operator \llbracket\cdot\rrbracket_{f} , face measure |f| , and element length scale h_{e} ) follow the definitions in ( 62 ). 4.2.3. Shock indicator and selective application of OE On curvilinear meshes, evaluating ( 72 ) can be computationally expensive because it requires mixed derivatives up to order m on every face and for every state component. In our experiments, the OE stage may account for a substantial fraction of the overall runtime. To reduce the cost, we apply OE only on troubled elements detected by a shock indicator. Among many available indicators 47 ; 29 ; 61 , we adopt a low-cost choice derived from the zero-order jump measure in ( 72 ). Specifically, for each element \Omega_{e} we define (73) \mathcal{I}^{(e)}(\bm{U}_{h}^{e})=\sum_{f\in\partial\Omega_{e}}\sigma_{0}^{(f)}(\bm{U}_{h}^{e}), with \sigma_{0}^{(f)}(\bm{U}_{h}^{e}) given by ( 71 ) at m=0 , i.e., (74) \sigma_{0}^{(f)}(U_{h}^{e,r})=\begin{cases}0,&U_{h}^{e,r}=\bar{U}_{h}^{e,r},\\[5.16663pt] \dfrac{1}{2(2N-1)}\dfrac{\frac{1}{|f|}\int_{f}\bigl|\llbracket U_{h}^{e,r}\rrbracket_{f}\bigr|\,dS}{\|U_{h}^{e,r}-\bar{U}_{h}^{e,r}\|_{L^{\infty}(\Omega_{e})}},&\text{otherwise}.\end{cases} Elements satisfying the following conditions are marked as troubled and subjected to the full OE operator: (75) \mathcal{I}^{(e)}(\bm{U}_{h}^{e})>C where constant C is named as shock indicator threshold in the following. Otherwise we set \bm{U}_{\sigma}^{e}=\bm{U}_{h}^{e} . 1 Input : DG solution \{\bm{U}_{h}^{e}\}_{e} ; threshold constant C>0 . Output : OE-processed solution \{\bm{U}_{\sigma}^{e}\}_{e} . 2 foreach element \Omega_{e} do 3 Compute \mathcal{I}^{(e)}(\bm{U}_{h}^{e}) from ( 73 )–( 74 ) 4 if \mathcal{I}^{(e)}(\bm{U}_{h}^{e})>C then 5 Compute \sigma_{m}^{(f)}(\bm{U}_{h}^{e}) for m=1,\dots,N via ( 72 ) 6 Form \delta_{m}^{(e)} and apply ( 70 ) to obtain \bm{U}_{\sigma}^{e} 7 else 8 Set \bm{U}_{\sigma}^{e}\leftarrow\bm{U}_{h}^{e} 9 end if 10 end foreach 11 Algorithm 1 Selective OE procedure on curvilinear meshes using a shock indicator. Remark 4.4 (Comparision with KXRCF indicator) . The indicator ( 73 ) is closely related in structure to jump-based sensors such as the KXRCF indicator 47 and several recent variants 72 . This motivates the use of \sigma_{0}^{(f)} as a cost-effective troubled-cell detector. 5. Numerical Examples In this section, we use multiple numerical examples to assess the performance of the proposed entropy-stable DG scheme equipped with the oscillation-eliminating (OE) procedure on both Cartesian and curvilinear meshes. Unless otherwise specified, a positivity-preserving limiter 77 ; 78 is applied in all numerical experiments to guarantee non-negativity of the density and pressure. The code implementation is based on MFEM library 3 ; 4 for all the simulations. Time integration is performed using the third-order strong-stability-preserving Runge–Kutta method ( 52 ). The time step size \Delta t is determined according to the CFL condition (76) \Delta t=K\,\min_{\Omega_{e}}\frac{h_{e}}{\bigl(\|\bm{u}_{e}\|+c_{e}\bigr)}, where K is the CFL constant, h_{e} denotes a characteristic element length scale (taken as the radius of the inscribed circle of \Omega_{e} ), and \bm{u}_{e} and c_{e} are the local velocity vector and speed of sound on element \Omega_{e} , respectively. In practice, \bm{u}_{e} and c_{e} are evaluated by taking the maximum over the quadrature points within each element. In all the following simulations and tests, we use CFL constant K=\frac{0.5}{2N+1} . Unless otherwise specified, the OE scale factor s defined in ( 63 ) and shock indicator threshold C defined in ( 75 ) are set as: (77) s=0.2,\quad C=0.02. 5.1. Isentropic Euler vortex problem The isentropic Euler vortex problem describes the advection of a smooth vortex by a constant background velocity field. Owing to its known analytic solution, this problem serves as a standard benchmark for assessing the accuracy and robustness of high-order numerical methods for the compressible Euler equations 71 ; 67 . The computational domain is the periodic square \Omega=[-10,10]^{2} . The exact solution is given by (78) \displaystyle u(x,y,t) \displaystyle=u_{b}-\frac{\beta}{2\pi}\bigl(y-v_{b}t\bigr)\exp\!\left(\frac{1}{2}\Bigl[1-(x-u_{b}t)^{2}-(y-v_{b}t)^{2}\Bigr]\right), \displaystyle v(x,y,t) \displaystyle=v_{b}+\frac{\beta}{2\pi}\bigl(x-u_{b}t\bigr)\exp\!\left(\frac{1}{2}\Bigl[1-(x-u_{b}t)^{2}-(y-v_{b}t)^{2}\Bigr]\right), \displaystyle T(x,y,t) \displaystyle=1-\frac{(\gamma-1)\beta^{2}}{8\gamma\pi^{2}}\exp\!\left(1-(x-u_{b}t)^{2}-(y-v_{b}t)^{2}\right), \displaystyle\rho(x,y,t) \displaystyle=T(x,y,t)^{\frac{1}{\gamma-1}},\qquad p(x,y,t)=T(x,y,t)^{\frac{\gamma}{\gamma-1}}. Here \gamma=1.4 is the ratio of specific heats, \beta=5 controls the vortex strength, and (u_{b},v_{b})=(1,1) denotes the constant background velocity. To assess the performance of the proposed method on curved geometries, we employ a curvilinear mesh in this test. The mesh is generated by first constructing a uniform Cartesian grid with N_{x}=N_{y}=M elements, and then applying the smooth coordinate transformation (79) \displaystyle x^{\prime} \displaystyle=x+0.05\,\sin(\alpha\pi x)\cos(\alpha\pi y), \displaystyle y^{\prime} \displaystyle=y+0.10\,\cos(\alpha\pi x)\sin(\alpha\pi y), with \alpha=1.5 . Figure 1 illustrates the initial density field together with the resulting curvilinear mesh. (a) Initial Density Profile (b) Curvilinear Grids Figure 1 . Isentropic Euler vortex problem : initial condition of density and Curvilinear grids for Isentropic Euler Vortex problem. Mesh size: N_{x}=N_{y}=M=40 To assess the convergence behavior, the simulation is advanced to t=20 , corresponding to one full advection period of the vortex across the domain. The L^{2} errors of all conservative variables are then computed for polynomial orders N=3 and N=4 in \mathbb{Q}_{N} . Note that due to smoothness of this test case, the OE procedure is not activated. Figure 2 demonstrates that the proposed method achieves the expected (N+1) -th order convergence rate, i.e., \mathcal{O}(h^{N+1}) , where the mesh size is defined as h=20/M . This behavior is consistent with the theoretical convergence results for smooth solutions of the discontinuous Galerkin method 18 . (a) N=3 (b) N=4 Figure 2 . Isentropic Euler vortex problem : convergency Rate of Isentropic Euler vortex problem in curvilinear mesh. Left figure has polynomial order of N=3 , and the polynomial order of right figure is N=4 We further examine the entropy stability of the proposed scheme for this test case. Specifically, we compute the numerical approximation of the total entropy (80) I_{\eta}(t)=\int_{\Omega}\eta\,d\bm{x}=\sum_{e}\int_{\Omega_{e}}\eta\,d\bm{x}, and track its evolution in time. Figure 3 shows the time history of I_{\eta}(t) . In both cases, the total entropy is observed to be non-increasing throughout the simulation, indicating that the proposed DG scheme satisfies a discrete entropy inequality and is therefore entropy stable. (a) N=3 (b) N=4 Figure 3 . Isentropic Euler vortex problem : how entropy integration changes with time. Left figure has polynomial order of N=3 , and the polynomial order of right figure is N=4 5.2. Two-dimensional Riemann problems We next consider two-dimensional Riemann problems for the compressible Euler equations. The computational domain \Omega=[0,1]^{2} is divided into four quadrants, each of which is assigned a constant initial state. Depending on the choice of these initial states, a wide variety of wave interactions and flow structures can be generated 49 ; 65 . In this work, we focus on Riemann problems 12 and 13 reported in 49 . In several existing studies, outflow boundary conditions are employed for these problems 59 . However, in our numerical experiments, such boundary conditions may induce spurious oscillations near the domain boundaries. To avoid these effects and to better isolate the interior wave interactions, we instead impose periodic boundary conditions as discribed in 37 . To accommodate periodic boundaries, the computational domain is extended to \Omega=[0,2]^{2} , and the initial data are defined through a periodic extension of the standard Riemann configuration on [0,1]^{2} . Specifically, the initial condition is given by (81) \displaystyle\bm{U} \displaystyle=\bm{U}_{1}, \displaystyle 0\dfrac{1}{6}+\dfrac{y}{\sqrt{3}}.\end{cases} The boundary conditions are prescribed as follows. An inflow condition is imposed on the left boundary, while an outflow condition is used on the right boundary. On the top boundary, a moving shock condition is applied: the post-shock state is prescribed on the segment 0