High-brightness fiber-based Sagnac source of entangled photon pairs for multiplexed quantum networks Tess Troisi, Yoann Pelet, Romain Dalidet, Gregory Sauder, Olivier Alibart, Sébastien Tanzilli, Anthony Martin Abstract A fully fibered source of entangled photon pairs based on a nonlinear Sagnac interferometer is reported. Operating at telecom wavelengths, the source relies exclusively on standard fiber-optic components and periodically poled lithium niobate (PPLN) waveguides, resulting in a compact, robust, and field-deployable architecture. The generation stage supports both polarization and energy-time entanglement without modification, enabling versatile operation depending on the targeted application. Broadband spontaneous parametric down-conversion allows dense wavelength-division multiplexing over the telecom C and L bands. High normalized brightness (10.3 kpairs/s/nm/mW 2 ) is achieved on a standard 100 GHz ITU channel pair, together with high entanglement quality. Polarization and energy-time encodings are characterized through state tomography and two-photon interference measurements, yielding fidelities, purities, and visibilities exceeding 96% over multiple wavelength channels. The stability and reproducibility of the source are further evaluated through long-duration operation in a network environment. These results demonstrate that the proposed Sagnac source constitutes a practical and scalable building block for future plug-and-play quantum communication and quantum networking platforms. I Introduction Photonic entanglement is a key resource for quantum communication, distributed quantum information processing, and emerging quantum network architectures. In particular, quantum key distribution (QKD) has reached a level of maturity that enables deployment beyond laboratory environments toward real-field implementations Sena:25 ; Wengerowsky_2018 ; wehner2018 . Practical quantum communication systems, therefore, require sources that combine high entanglement quality with robustness, ease of use, and compatibility with existing fiber-optic infrastructure. Among the various photonic encodings, energy-time entanglement is well suited for long-distance fiber transmission and high-dimensional encoding Xavier2025 , while polarization encoding offers advantages in terms of state manipulation and measurement, and remains the preferred choice for free-space links, with efficient fiber-based implementations also demonstrated Qotham . The development of versatile entangled photon sources capable of supporting multiple encodings is therefore an important step toward flexible quantum communication architectures. From an engineering perspective, relevant performance metrics include high source brightness with high entanglement quality, low power consumption, robustness to environmental perturbations, ease of use, and straightforward integration with standard telecom components. While integrated photonic platforms provide compactness and excellent interferometric stability Zhu_25 , coupling losses at the chip–fiber interface can limit their overall efficiency. Guided-wave and fiber-based approaches, therefore, remain attractive alternatives, offering bright, compact, and versatile entangled photon sources supporting multiple encoding schemes Achatz2023 ; Gianini2026 ; Vergyris_2019 . Taken together, these requirements are closely aligned with the long-term vision of large-scale quantum networks, in which stable, interoperable, and deployable entanglement sources play a central role wehner2018 . In this work, a fiber-based Sagnac entangled photon-pair source operating at telecom wavelengths is presented. The source is designed as a versatile and transportable device supporting both polarization and energy-time entanglement, without modification of the generation stage. Energy-time entanglement is provided by spontaneous parametric down-conversion, while polarization entanglement is generated using a polarization-dependent interferometric configuration. The broadband emission of the source enables dense wavelength-division multiplexing Arahira:11 ; Li_2023 ; Cabrejo_Ponce_2022 , and its intrinsic stability allows long-term operation without realignment. The performance of the source is assessed through detailed polarization-entanglement characterization across multiple wavelength channel pairs. In contrast, energy-time encoding is evaluated through a quantum key distribution (QKD) experiment performed on a single channel pair, providing a system-level validation of the source stability under extended operation yoyo . II Nonlinear Sagnac source Sagnac interferometers have long been employed in precision sensing and metrology, most notably in fiber-optic gyroscopes, where their passive phase stability and robustness have been extensively exploited Arditty1981 . These characteristics further motivate the use of Sagnac-based architectures for quantum technologies requiring long-term stability and resilience to environmental perturbations. Sagnac interferometers based on spontaneous parametric down-conversion (SPDC) have proven to be a particularly attractive platform for entangled photon-pair generation shi2004generation ; kim2006phase ; Kuzucu_2008 . Their intrinsic phase stability, arising from the counter-propagation of optical fields along identical paths, enables the generation of high-quality entangled states without active stabilization kim2001 . The entangled photon-pair source is based on a nonlinear Sagnac interferometer shi2004generation ; kim2006phase , conceptually depicted in Figure 1 . A continuous-wave telecom pump laser is injected into the interferometer through a circulator and split into two counter-propagating paths by a polarizing beam splitter (PBS). The clockwise (CW) and counterclockwise (CCW) components propagate along identical optical paths with orthogonal polarizations. In each propagation direction, the pump field undergoes second-harmonic generation (SHG) in a PPLN waveguide crystal. The generated visible field then pumps a second PPLN waveguide, where broadband degenerate photon pairs are produced via type-0 SPDC. The photon pairs generated in the CW and CCW contributions are coherently recombined at the polarizing beam splitter, resulting in a polarization-entangled state of the form \ket{\Psi}=\alpha\ket{HH}+e^{i\phi}\beta\ket{VV}, (1) where |\alpha|^{2}+|\beta|^{2}=1 . The relative amplitudes \alpha , \beta and phase \phi are controlled via the pump’s input polarization. The fully fibered implementation of the Sagnac interferometer, combined with the use of standard telecom components, results in a compact and mechanically stable source. The broadband phase-matching of the PPLN waveguides enables photon-pair generation over a spectral width of approximately 90 nm (FWHM), allowing efficient wavelength multiplexing across multiple standard ITU channels. III Experimental setup Figure 1 : Experimental setup of the fiber-based Sagnac source. EDFA: erbium-doped fiber amplifier; VOA: variable optical attenuator; PC: polarization controller; CIR: circulator; PBS: polarizing beam splitter; NF: notch filter; DWDM: dense wavelength-division multiplexer. As depicted in Figure 1 , a continuous-wave laser centered at 1560.6 nm with a 1 kHz linewidth is used as the pump. It is further amplified using an erbium-doped fiber amplifier (EDFA), and its power is finely controlled by a variable optical attenuator (VOA) before injection into the Sagnac interferometer. A fiber circulator, including a notch filter, suppresses the laser amplified spontaneous emission and forward Raman scattering, ensuring that only backward Raman scattering noise contributes to the detected spectrum, as shown in Figure 2 . Figure 2 : Comparison of the photon pair spectrum (red) with the spontaneous Raman scattering spectrum (blue). Exploited photon pair spectrum for entanglement distribution over 100 GHz DWDM management plan is represented here (not to scale). The polarization state of the pump mode is achieved using a thermal polarization controller before the PBS, to define the power splitting ratio and the phase relation between the CW and CCW propagations. The output ports of the PBS are aligned to the slow axes of polarization-maintaining fibers to ensure proper coupling into the nonlinear waveguides. When the pump polarization is set to a \frac{\ket{H}+\ket{V}}{\sqrt{2}} , after the double conversion processes, the desired state \ket{HH}+\ket{VV}/\sqrt{2} is obtained. The conversion processes are ensured by type-0 PPLN:MgO fiber-pigtailed waveguide crystals with a length of 22 mm. Careful selection of the PPLN nonlinear crystals has been applied in order to obtain performances as similar as possible. The SHG conversion efficiencies and SPDC characteristics of the PPLN waveguides 1 and 2 are summarized in TABLE 1 . PPLN 1 PPLN 2 SPDC spectra FWHM 91 nm 92 nm SHG conversion efficiency 34 %/W 39.2 %/W Brightness (pairs.s -1 .nm -1 .mW -1 ) 152\cdot 10^{6} 175\cdot 10^{6} Efficiency 6.2 \cdot 10^{-8} 7.16e-8 Coupling to SMF28 65.5 % 62 % Table 1 : The main figures of merits have been characterized and reported here. It encompasses, the efficiency of up- and down-conversion, the spectral bandwidth of the emitted pairs but also the coupling efficiency of the photon pairs into single mode fiber. From the measured SHG and SPDC efficiencies summarized above, the overall source brightness can be estimated as the number of photon pairs generated per unit of input telecom pump power in the bidirectionally pumped Sagnac configuration, yielding a total pair generation rate of 10.3 kpairs/s/nm/mW 2 . A short length single mode fiber at 780 nm between PPLN 1 and 2 ensures more than 86 dB of pump light attenuation but the circulator-filter only provides 47 dB isolation from the input port. Therefore, when the entangled photons exit the Sagnac interferometer through the third port of the circulator-filter, additional pump rejection filtering is required. A cascaded set of two telecom add-drop DWDM at 1560.6 nm (ITU21), 1562.23 nm (ITU 19) and 1558.98 nm (ITU 23), provides the required isolation and deterministically separates the photon pairs via spectral demultiplexing. In practice, the isolation of channels 20 and 22 from channel 21, using standard components, isn’t high enough and have to be excluded from our multiplexing scheme. 100 GHz-DWDMs are therefore used to select 20 symmetric ITU channel pairs around the pump wavelength, starting from ITU 19 and ITU 23 for most of the characterizations. The general setup for the characterization is described as follow: the photon pairs are detected using superconducting nanowire single-photon detectors (IDQuantique) showing an efficiency of 80\% and a dark count rate of 50 Hz. The individual detection rates and the analysis of the coincidence rate are computed using a time-to-digital converter (Swabian). IV Entanglement analysis IV.1 Energy-time encoding Figure 3 : TOP : Fiber-based energy-time analyzer (Franson interferometer) used for two-photon interference measurements. BOTTOM : Two-photon interference fringes used to extract the raw energy-time visibility for the selected ITU channel pair. Energy-time entanglement is characterized using a passively stabilized fiber-based Franson interferometer in a Michelson configuration, as shown in Figure 3 . The interferometer consists of a 50:50 fiber beam splitter and two Faraday mirrors, ensuring polarization-insensitive operation and perfect spatial mode overlap. Interference fringes are recorded by varying the relative phase between the interferometer arms using a piezoelectric fiber stretcher. The interferometer FSR is chosen to satisfy the condition \Delta\nu_{p}