Accessibility and Serviceability Assessment to Inform Offshore Wind Energy Development and Operations off the U.S. East Coast Publication type: Research Article Cory Petersen, Feng Ye, Jiaxiang Ji, Josh Kohut, Ahmed Aziz Ezzat ∗, David Saginaw, Avril Montanti, Jack Cammarota Abstract The economic success of offshore wind energy projects relies on accurate projections of the construction, and operations and maintenance (O&M) costs. These projections must consider the logistical complexities introduced by adverse met-ocean conditions that can prohibit access to the offshore assets for sustained periods of time. In response, the goal of this study is two-fold: (1) to provide high-resolution estimates of the accessibility of key offshore wind energy areas in the United States (U.S.) East Coast—a region with significant offshore wind energy potential; and (2) to introduce a new operational metric, called serviceability , as motivated by the need to assess the accessibility of an offshore asset along a vessel travel path, rather than at a specific site, as commonly carried out in the literature. We hypothesize that serviceability is more relevant to offshore operations than accessibility, since it more realistically reflects the success and safety of a vessel operation along its journey from port to site and back. Our analysis reveals high temporal and spatial variations in accessibility and serviceability, even for proximate offshore locations. We also find that solely relying on numerical met-ocean data can introduce considerable bias in estimating accessibility and serviceability, raising the need for a statistical treatment that combines both numerical and observational data sources, such as the one proposed herein. Collectively, our analysis sheds light on the value of high-resolution met-ocean information and models in supporting offshore operations, including but not limited to future offshore wind energy developments. keywords Accessibility, Serviceability, Logistics, Offshore Energy, Operations and Maintenance † † corresponding: ∗ Ahmed Aziz Ezzat, 96 Frelinghuysen Rd, Piscataway, NJ, 08854, USA Petersen et al 1 Introduction Driven by an increasing global demand for energy, coastal nations are turning to offshore energy resources in an effort to unlock access to ocean-based abundant energy resources while advancing the economic development and sustainable growth of their coastal economies. Among these ocean-based resources, offshore wind energy is projected to grow rapidly into a major source of global renewable energy generation, owing to its numerous environmental and economic benefits [ 19 ] . The United States (U.S.) in particular has significant offshore wind potential, distributed across a number of geographical regions off of its coastline [ 17 ] . Of these, the U.S. East Coast is expected to be the first and largest contributor to future offshore wind developments due to its relatively shallow waters, steady winds, and proximity to major coastal population centers [ 30 ] . These characteristics make the East Coast the most feasible and economically promising region in the United States for offshore wind development in the near term [ 11 , 22 ] , and hence, is the geographical focus of this work. To enable the economic success of future offshore wind projects and de-risk their development and operations, there is a need for accurate, region-specific projections of the construction, operations and maintenance (O&M) requirements and costs [ 18 , 32 , 14 ] . For example, O&M activities alone contribute \sim 30 - 40 % of an offshore wind project’s total life cycle costs [ 35 ] . Thus, efforts to precisely estimate O&M expenditures, let-alone to reduce them, can have a significant impact on the future economic prospect of an offshore wind project. However, obtaining accurate offshore wind O&M projections is not trivial, in part due to the logistical complexities introduced by a dynamic met-ocean environment which can significantly hinder the capability of wind farm operators to effectively and safely schedule, dispatch, and undertake critical construction and O&M operations at sea [ 7 , 8 ] . Unlike land-based wind farms, operational activities in an offshore environment are largely restricted by adverse met-ocean conditions. If these conditions exceed their perceived safety limits, the ability to transport personnel, material, and equipment to the offshore assets is prohibited. As a result, time-sensitive maintenance actions may be delayed until milder conditions arise, which can have a significant impact on the availability of offshore assets, especially when considering sensitive or costly repairs [ 10 , 5 ] . Recent studies suggest that properly modeling met-ocean conditions in a wind farm can help reduce the total O&M costs of an offshore wind farm by as much as 7 % [ 26 , 28 ] . This is because accurate information about met-ocean conditions can enable operators to proactively schedule maintenance tasks at times of higher likelihood of success, thereby reducing unnecessary delays due to asset shutdowns and maintenance interruptions, ultimately lowering the overall O&M costs [ 6 , 27 ] . Recognizing its impact on offshore construction and O&M planning, there have been prior efforts to examine the accessibility of offshore locations, with the overwhelming majority of these efforts focused on offshore wind energy projects in the North Sea [ 15 , 40 , 6 , 34 ] . Unique to our study are the following aspects: • Up to the authors’ knowledge, this study presents the first attempt to provide high-resolution accessibility estimates for the potential offshore wind energy areas off the U.S. East Coast. We envision our findings to provide timely insights to the developers and operators of future and current large-scale offshore wind farms in this region, guiding their construction and O&M projections and supporting their logistical planning decisions. This is especially relevant considering that vessel shortage has been cited as a major bottleneck for offshore wind energy development in the United States and elsewhere [ 25 ] and hence, efficient utilization of vessel resources which considers high-fidelity and precise logistical information about accessibility will be key to enable the economic success of the offshore wind industry [ 33 ] . • The majority of publicly available accessibility assessment studies primarily rely on numerical model data to derive accessibility estimates [ 39 , 34 , 15 , 31 ] . This is because long streaks of spatio-temporal observational data, which are needed for accurate accessibility estimation, are typically unavailable, especially for new offshore wind developments. Observing the inherent biases of numerical models, we propose a statistical regression framework to combine observations that are scarce (temporally) and sparse (spatially), with numerical model data, in order to derive accurate, high-resolution, estimates of accessibility that cannot be derived by solely relying on observational or numerical model data alone. • We propose a new logistical metric, which we call serviceability , aiming to assess the accessibility of an offshore site along a vessel’s travel path, and considering the vessel’s operational profile. This is unlike the commonly adopted definition of accessibility which only considers the met-ocean conditions at an offshore site, and can lead to overly conservative logistical decisions, thereby forfeiting work opportunities due to imprecise met-ocean assessments. We hypothesize that serviceability is more relevant to construction and O&M planning than accessibility, since it more realistically reflects the success of the offshore activities throughout the offshore mission, from port to site. • We carry out season-to-season, and site-to-site comparisons of accessibility and serviceability for key offshore energy regions off the U.S. East Coast. This analysis reveals important spatial and temporal variability in accessibility and serviceability, which can provide crucial insights to developers of future offshore energy projects in de-risking their economic bids (pre-leasing), as well as determining their logistical requirements during construction, operations, and maintenance. The paper is organized as follows. Section 2 describes the data used in this work, and its relevance to the U.S. offshore wind energy sector. Section 3 introduces the proposed accessibility estimation framework combining observational and numerical model data, and introduces serviceability as a new logistical metric to assess accessibility along a vessel route. Section 4 presents the results of our accessibility and serviceability assessment off the U.S. East Coast, and discusses relevant analyses and findings to the offshore wind areas therein. Finally, Section 5 concludes the paper, outlines future research directions, and discusses the applicability of the methods and analyses conducted herein to broader industries and applications of the Blue Economy. 2 Data Description and Exploratory Analysis Several factors can impact the accessibility of an offshore asset. These can be broadly categorized into: • Environmental factors , which refer to the met-ocean conditions (i.e., sea and weather states) that can restrict the safe access of vessels, equipment, material, and crew, to an offshore asset. • Operational factors , which refer to the logistical resources available (e.g., mode of transport, access system), as well as operational parameters related to the offshore missions to be carried out (e.g., mission duration, complexity, vessel’s expected travel path and operational profile). In what follows, we proceed to describe each of these sets of factors. 2.1 Environmental Factors For environmental factors, this study focuses on two met-ocean variables: Significant wave height, denoted by H , and wind speed, denoted by v . Significant wave height is typically considered the main determinant of offshore access, since vessels have a prescribed upper safety limit, denoted by H^{*} , above which they cannot safely carry out offshore missions. Wind speed, on the other hand, can compromise the safe navigation of the vessel, complicate berthing, mooring, transfer, and lifting operations, as well as limit areal modes of transport. We denote the wind speed safety limit as v^{*} . In this study, data about H and v are obtained from two main sources: ( i ) A set of observational data collected using thirteen buoys in the Northeastern United States; and ( ii ) A set of met-ocean data extracted from two numerical models. In what follows, we describe these datasets and their relevance to the offshore wind energy areas off the U.S. East Coast. All observational and numerical datasets used in this study are available in the public domain, and the references to access these datasets are cited in the appropriate context. 2.1.1 Observational Data Figure 1: A geographical map showing the locations of the buoys (red stars) on top of the offshore wind regions off the U.S. East Coast (blue polygons), as adapted from the Bureau of Ocean Energy Management (BOEM) as of August, 2025 [ 3 ] . There were originally four proximate ASOW buoys, for which the data have been pooled (for increased data coverage) into a central location, depicted as ASOW-pooled. More details about the observational data are in Table 1 . Five years of observational data, from January 2019 to December 2023, are collected from three main sources: ( i ) The National Data Buoy Center (NDBC) maintained by The National Oceanic and Atmospheric Administration (NOAA) [ 38 ] (a total of 7 buoys), providing wind data at a height of 3 meters ( m ) as well as wave-related data; ( ii ) ASOW (Atlantic Shores Offshore Wind) buoys [ 1 ] (a total of 4 buoys), providing 10 - m wind data, as well as wave data; and ( iii ) New York State Energy Research and Development Authority (NYSERDA)-supported buoys [ 21 ] (a total of 2 buoys), providing 10 - m wind data, as well as wave data. Figure 1 shows the locations of the buoys, on top of the offshore wind energy areas off the U.S. East Coast. Note that an even larger number of buoys in this region was initially considered, but some buoys were eliminated due to severe data missingness or insufficient temporal coverage. Additionally, considering that the ASOW buoys are in close proximity to one another, their data have been pooled for increased data coverage into a central location, which we call ASOW-pooled. Data pooling was implemented by averaging the four ASOW datasets while excluding null entries: if only one buoy reported a value at a given timestamp, that value was used; if more than one buoy reported a value, the average of all non-null values was recorded as the pooled entry. In total, five-year data from 10 different locations were selected after the pooling process was complete, starting from January 2019 to December 2023. The data from all three sources were recorded in either 10-minute or 1-hour intervals. All 10-minute data were processed into hourly averages. Additional data pre-processing was carried out to discard erroneous or physically implausible values to ensure the quality of the input met-ocean datasets. Table 1 details the coordinates and coverage for each buoy. Each dataset has a different time coverage, and several streaks of missing values. The NOAA buoys were the most complete with long coverage windows and contained near-sea-level wind and wave data. The observations from all buoys can be naturally regarded as spatial-temporal data, so we denote by H_{it} and v_{it} the values of the significant wave height and wind speed observed at location i and time t , respectively, with, i\in\{1,\ldots,I\} and t\in\{t_{i}^{o},\ldots,t_{i}^{e}\} , such that I=10 locations, whereas t_{i}^{o} and t_{i}^{e} are the start and end times of the i th buoy’s data. Buoy Latitude Longitude Variable Start End % Missing 44005 43.20 - 69.13 H 2019-01-04 18:00 2023-12-31 23:00 21.0% (21.2%*) v 2019-06-04 07:00 2023-12-31 23:00 24.5% (30.9%*) 44008 40.50 - 69.25 H 2019-05-10 14:00 2023-12-31 23:00 1.5% (8.5%*) v 2019-05-10 14:00 2023-12-31 23:00 0.7% (7.7%*) 44009 38.46 - 74.69 H 2019-01-01 00:00 2023-12-31 23:00 4.4% (4.4%*) v 2019-05-07 18:00 2023-12-31 23:00 25.7% (30.9%*) 44014 36.60 - 74.84 H 2019-01-01 00:00 2023-12-31 23:00 20.7% (20.7%*) v 2019-01-01 00:00 2023-12-31 23:00 18.4% (18.4%*) 44017 40.69 - 72.05 H 2019-01-01 00:00 2023-01-21 13:00 22.4% (37.0%*) v 2019-01-01 00:00 2023-01-21 13:00 20.8% (35.8%*) 44018 42.20 - 70.15 H 2019-01-01 00:00 2023-12-31 23:00 26.7% (26.7%*) v 2019-01-01 00:00 2023-12-31 23:00 26.0% (26.0%*) 44025 40.26 - 73.18 H 2019-01-01 00:00 2023-12-18 12:00 1.4% (2.1%*) v 2019-01-01 00:00 2023-09-04 19:00 2.6% (8.9%*) E05N 39.97 - 72.72 H 2019-08-12 00:00 2021-09-19 23:00 0.2% (57.9%*) v 2019-09-01 00:00 2021-09-14 02:00 11.6% (65.0%*) E06 39.55 - 73.43 H 2019-09-04 00:00 2022-03-27 23:00 6.0% (51.8%*) v 2019-09-04 00:00 2022-03-27 23:00 15.0% (55.3%*) ASOW-1 39.31 - 74.11 H 2021-05-17 01:00 2023-12-31 23:00 41.8% (69.4%*) v 2021-10-07 15:00 2023-12-31 23:00 42.9% (74.5%*) ASOW-2 39.57 - 73.97 H 2022-08-14 01:00 2023-10-23 20:00 13.2% (79.3%*) v 2022-08-14 01:00 2023-10-23 20:00 13.2% (79.3%*) ASOW-4 39.20 - 74.08 H 2021-05-14 17:00 2022-06-14 05:00 68.1% (93.1%*) v 2021-05-14 17:00 2022-06-14 05:00 68.1% (93.1%*) ASOW-6 39.27 - 73.94 H 2020-02-26 14:00 2021-05-14 13:00 47.2% (87.2%*) v 2020-02-26 14:00 2021-05-14 13:00 46.9% (87.1%*) ASOW-pooled 39.34 - 74.03 H 2020-02-26 14:00 2023-12-31 23:00 32.3% (47.9%*) v 2020-02-26 14:00 2023-12-31 23:00 32.8% (48.3%*) Table 1: Description of the observational data used in this study from thirteen different buoys, including the location, time coverage, and percentage of missing values for wave height ( H ) and wind speed ( v ). In the last column, the values preceding the parentheses denote the percentage of missing values over the available data window (between the start and end dates), whereas values in the parentheses denote the percentage of missing values over the full five-year range, from January 2019 to December 2023. In the bottom row, the yellow cells indicate the data missingness values after pooling the four ASOW buoys, which are significantly lower when compared to the four ASOW locations exclusively over the five-year range. 2.1.2 Numerical Model Data Numerical model data are sourced from NOAA’s Global Forecast System (GFS) [ 36 ] and the GFS-driven WaveWatch III wave model [ 23 ] for wind and wave data, respectively. Hereinafter, these will be collectively referred to as the numerical model data or numerical model outputs . These models operate on a 0.5° x 0.5° and 0.25° x 0.25° grid resolution, respectively, and provide hourly data for both wind speed and significant wave height. Numerical model outputs are all publicly available [ 36 , 24 ] . Grid points used in this study are selected to spatially match each buoy location as closely as possible. At each buoy location, four surrounding numerical model grid points (north, south, east, and west) were extracted. After which, Delaunay Triangulation was used to interpolate the model value at the precise buoy location. This approach helps reduce spatial bias inherent in assigning the nearest grid point alone. We denote by \tilde{H}_{it} and \tilde{v}_{it} as the numerical model output of the significant wave height and wind speed at location i and time t , respectively. Figure 2: Five-year time series of wind speed (left) and significant wave height (right) from the GFS and the GFS-driven Wavewatch III, respectively (cyan lines), and buoy observations (navy cross markers) at three NOAA buoys, 44005, 44014, and 44025, from January 2019 to December 2023. While there are instances where the numerical model is unavailable, coverage is far more complete and consistent relative to observational data. Figure 2 shows the time series of numerical and observational data for wind speed (left) and significant wave height (right) at three buoy locations: 44005, 44014, and 44025. It clearly highlights the completeness of numerical model outputs compared to the substantial gaps in the observational data over the five-year period. While the numerical model outputs provide consistent temporal coverage across all sites, the observational data records show large stretches of missing data. We also observe that numerical model outputs, while generally aligning with observational data, tend to exhibit noticeable biases. This is even more obvious in Figure 3 which offers a zoomed-in view of the numerical model outputs over a select short time frame (about two weeks). Despite the overall alignment in both trend and magnitude, considerable under- and over-estimation biases in estimating met-ocean conditions are observable [ 12 , 41 ] . These biases appear to be especially pronounced during severe met-ocean conditions, which are most relevant for offshore accessibility considerations as they are at or near the critical safety thresholds of offshore operations. This trade-off between data abundance and fidelity motivates the need for a statistical treatment, as the one proposed in Section 3, which integrates both data sources (namely, the observational and numerical model data) to produce reliable, high-resolution estimates of accessibility that would be practically unattainable using observational or numerical model data alone. Figure 3: Zoomed-in view of numerical model outputs (cyan lines) versus observational data (blue cross markers) for approximately two weeks in March 2022. Despite the overall alignment, noticeable under- and over-estimation biases can be observed especially for severe met-ocean conditions which are the most relevant for the accessibility assessment in offshore operations. 2.2 Operational Factors Two sets of operational parameters are considered in this study. The first operational parameter is the duration of the offshore mission to be carried out. This is defined via a minimum weather window length, denoted hereinafter as \zeta , which is required to safely complete this offshore mission. For example, if \zeta=12 hours, then the operator needs to schedule this mission at a time when at least twelve hours of sustained access to the offshore asset is expected. The second parameter is the safety limit(s) of the met-ocean environment, which is represented by a vector of upper bounds on the met-ocean variable(s) considered, denoted in this study as H^{*} for significant wave height, and v^{*} for wind speed. The ability to access an offshore asset is dependent on the combination of \zeta , H^{*} , and v^{*} , which are in turn informed by the type of offshore mission and transport system employed. In this study, we use H^{*}\in[1.5m,4.5m] in 0.25 - m increments. The lower and upper bounds of this interval are chosen to reflect standard safety limits from common crew transfer vessels (CTVs) to large service operation vessels (SOVs) with advanced access systems [ 31 ] . The safety limit for wind speed is set at 12 ms^{-1} , that is, v^{*}=12 ms^{-1} , which has been reported in various sources as an upper bound for aerial transport [ 26 , 27 , 37 ] . We also select various values for \zeta , reflecting different types of maintenance actions. Particularly, we choose \zeta\in\{2,6,12,18,24\} hours, reflecting different levels of mission severity, from minor to more complex repairs [ 9 , 31 ] . Additionally, information about the vessel’s planned travel route and operational profile is typically available to logistical planners for standard offshore operations. An operational profile is a breakdown of the list of activities to be carried out by a vessel over the duration of its voyage (e.g., transiting, idling, loading/unloading), the percentage of time spent on each of these activities, as well as the travel speed and fuel consumption during each of these activities. This information, as we present later in Section 3.3., will be key inputs in defining serviceability as an operational, logistics-aware metric. 3 Methods We propose a two-phase methodological framework. First , we propose a time-series regression model which leverages both observational and numerical model data. This modeling approach accounts for seasonal and temporal trends, while correcting the biases of numerical model outputs, thereby producing high-resolution time series of met-ocean conditions for use in subsequent logistical analysis and planning. This is presented in Section 3.1. Second , we use the statistical model outputs, namely the high-resolution time series of met-ocean conditions, to evaluate operational metrics such as approachability, accessibility, and serviceability. These metrics will be defined explicitly in Sections 3.2 and 3.3. 3.1 Statistical Modeling of Met-ocean Conditions: Combining Numerical and Observational Data Observational data provides high-fidelity information about met-ocean conditions, but solely using them to estimate accessibility restricts the evaluation to time periods where measurements are available. Since these time periods only span for limited periods of time and contain fairly long streaks of missing data, this would result in misleading estimates due to missing important temporal features, such as season-to-season and year-to-year variations. A viable alternative is to use numerical model data, which are fairly abundant and do not significantly suffer from data missingness issues relative to observational data. However, as presented in Section 1, numerical models exhibit considerable biases that can largely inflate the accessibility estimation errors. To address these limitations, we propose a statistical framework to combine the high-fidelity (but scarce) observations with the fairly abundant (but lower-fidelity) numerical model data, for improved accessibility estimates. The first step is to extract site-specific time series comprising observational and numerical model data at periods where both sets of data are available. We then regress the observations on the numerical model data at each site using a time series regression (TSR) model. Let \mathbf{x}_{it}=[x_{it,1},...,x_{it,M}]^{T} denote the vector of M met-ocean variables of interest at location i and time t . For example, if we only use wave height as the sole determinant of accessibility, then, \mathbf{x}_{it}=\{H_{it}\} . If we use both wave height and wind speed as determinants of accessibility, then we have \mathbf{x}_{it}=[H_{it},v_{it}]^{T} . Consequently, \mathbf{x}^{*}\in\mathbb{R}^{M} is the vector of safety limits acting, element-wise, on \mathbf{x}_{it} . The proposed TSR model is defined as in ( 1 ). x_{it,m}=\theta_{0}+\theta_{1}\tilde{x}_{i,t,m}+\theta_{2}\tilde{x}_{i,t-1,m}+\theta_{3}\tilde{x}_{i,t-24,m}+\sum_{k=1}^{K}\alpha_{k}s_{k,t}+\sum_{k=1}^{K}\beta_{k}c_{k,t}+\sum_{k=1}^{K}\psi_{k}s^{\prime}_{k,t}+\sum_{k=1}^{K}\omega_{k}c^{\prime}_{k,t}+\epsilon_{it},\quad\forall i\in\{1,...,I\},\quad\forall m\in\{1,...,M\} (1) where \theta_{0} , \theta_{1} , \theta_{2} , and \theta_{3} are regression coefficients for the intercept, current numerical model value \tilde{x}_{it,m} , and its lagged values at t-1 and t-24 hours, respectively. The coefficients \{\alpha_{k}\}_{k=1}^{K} and \{\beta_{k}\}_{k=1}^{K} are associated with the sine and cosine terms of the first trigonometric basis (monthly cycle), while \{\psi_{k}\}_{k=1}^{K} and \{\omega_{k}\}_{k=1}^{K} are the coefficients for the sine and cosine terms of the second trigonometric basis (yearly cycle). The basis functions s_{k,t} , c_{k,t} , s^{\prime}_{k,t} , and c^{\prime}_{k,t} are defined in Equation ( 2 ), each capturing periodic effects over different time scales. The term \epsilon_{i,t} is a zero-mean error term with its variance denoted as \eta . s_{k,t}=\sin\left(\frac{2\pi kt}{720}\right),\quad c_{k,t}=\cos\left(\frac{2\pi kt}{720}\right),\quad s^{\prime}_{k,t}=\sin\left(\frac{2\pi kt}{8760}\right),\quad c^{\prime}_{k,t}=\cos\left(\frac{2\pi kt}{8760}\right), (2) such that K is the number of Fourier pairs. We found that K=8 is a reasonable choice to balance over- and under-fitting, as assessed using the mean absolute error on an independent year-long validation set. The justification for the parametric form in ( 1 ) is as follows. In our exploratory data analysis, two main features were noticed: seasonal variability and significant auto-correlations. This motivated the inclusion of Fourier terms, of which the trigonometric functions can capture monthly and yearly seasonalities. Additionally, the one-hour lagged term captures short-term autocorrelations, whereas the one-day lagged term captures diurnal seasonality. Thus, the goal of the formulation in ( 1 ) is to calibrate the numerical model output, whereas the trigonometric series terms account for the remaining temporal variability that is not fully explained by the numerical model. We fit 20 different TSR models ( 10 sites \times 2 met-ocean variables = 20 models). Let \mathbf{H}_{i,m} denote the regression matrix of the TSR model at the i th site and m th met-ocean variable, as expressed in ( 3 ). \mathbf{H}_{i,m}=\begin{bmatrix}1&\tilde{x}_{i,1}&s_{1,1}&c_{1,1}&....&s_{K,1}&c_{K,1}\\ \vdots&\vdots&\vdots&\vdots&\vdots&\vdots&\vdots\\ 1&\tilde{x}_{i,T}&s_{1,T}&c_{1,T}&...&s_{K,T}&c_{K,T}\\ \end{bmatrix}. (3) Then, the output of the TSR model at any time t (including where no observations are available) is denoted as \hat{x}_{it,m} , and is determined as in ( 4 ). \hat{x}_{it,m}=\mathbf{h}_{i,m}^{new}(\mathbf{H}^{T}_{i,m}\mathbf{H})^{-1}\mathbf{H}^{T}\mathbf{x}_{i,m}, (4) where \mathbf{h}_{i,m}^{new}=[1,\tilde{x}^{new}_{i,t},s_{1,t},c_{1,t},...,s_{K,t},c_{K,t}]^{T} , such that \tilde{x}^{new}_{i,t} is the numerical model output at time t , whereas \mathbf{x}_{i,m}=\{x_{it,m}\}_{t=1}^{T} . 3.2 Approachability and Accessibility Having established the TSR models, we use them to make predictions for the multi-year met-ocean conditions at each location. Those are then used to compute important operational metrics for each site. Approachability is defined as the fraction of time that the met-ocean conditions are below their prescribed safety limits. We denote the approachability at the i th site as R_{i}(\mathbf{x}^{*}) and express it mathematically as in ( 5 ). R_{i}(\mathbf{x}^{*})=\frac{1}{T}\sum_{t=1}^{T}\bigg[\prod_{m=1}^{M}\mathbbm{1}(x_{i,t,m}2m ), where the numerical model, on average, yields lower accessibility and serviceability scores than those derived using the TSR. We believe that the values derived using the TSR model are more reflective of the underlying true values, considering the improved explanatory power of the model, especially in reducing model error during severe met-ocean conditions, as demonstrated earlier in Section 4.1. As a result, while the numerical model may under-estimate the accessibility and serviceability values around 1.5 to 2 meters, it may, conversely, over-estimate them at thresholds greater than 2 meters. Lower thresholds are more relevant to day-to-day operations conducted by CTVs, whereas higher thresholds are typically invoked for larger vessels that are typically reserved for longer and more complex missions. The differences in serviceability scores observed in Figure 13 raise an interesting question about the impact of such percentage point differences on the economics of offshore energy operations. Definitively answering this question requires a rigorous integration of the serviceability framework into O&M cost models, which is the focus of subsequent work. Yet, we hypothesize that embedding high-resolution, route-specific serviceability information into vessel dispatch and O&M models would likely lead to noticeable economic gains in offshore wind energy operations. This is because such information would enhance the ability of operators to precisely identify opportunistic weather windows of vessel scheduling, thereby lowering logistical requirements and O&M costs. This hypothesis is supported by the mounting evidence in the literature and practice that higher-resolution met-ocean and logistical information can yield significant gains in offshore operations and overall project availability [ 26 , 29 , 13 ] . Figure 13: Accessibility and serviceability scores derived using the numerical versus the TSR model. Using the numerical model appears to over-estimate accessibility and serviceability at lower thresholds, but under-estimate it at higher thresholds. 5 Conclusions and Future Directions In this paper, we introduced a methodological framework for accessibility and serviceability assessment, with a regional focus on the U.S. East Coast, to inform logistical planning, development, and O&M in the offshore wind energy areas therein. The study is motivated by a lack of detailed logistical information that is tailored to the met-ocean behavior in this region, which is a critical input to de-risk any large-scale offshore energy developments. Our work presented a number of unique contributions, including the first publicly available and extensive assessment of logistical accessibility for the U.S. East Coast, as well as the introduction of a new logistical metric, serviceability , which, unlike common metrics in the literature and practice, accounts for not only the temporal persistence of weather patterns, but also the met-ocean conditions experienced by a vessel along its travel path. We believe that this metric provides a more realistic and operationally relevant depiction of the true likelihood of mission success compared to traditional assessments of approachability and accessibility. Together, these contributions offer a rigorous way to link high-resolution met-ocean information with realistic offshore wind farm construction and O&M vessel dispatch and scheduling. The methods enable planners to go beyond static, point-based accessibility analysis and instead evaluate entire route feasibility, encompassing important information on both spatial and temporal variability in met-ocean conditions. While the serviceability case study presented in Section 4.2.2. focused on a specific 12-hour operational profile in the Mid-Atlantic region, we note that this is merely illustrative and does not limit the general applicability of the proposed serviceability metric. In fact, the serviceability metric proposed in Section 3.3. is applicable to routes of any duration and complexity, provided that the vessel’s operational profile information is available. This is a reasonable requirement, as these profiles are typically available to mariners and logistical planners for standard offshore operations. This generalizability of the serviceability framework can be leveraged to conduct a comparative assessment of serviceability scores across distinct regional routes with diverse environmental and operational conditions. Such assessment would provide highly valuable information to support detailed project siting decisions, techno-economic analyses, vessel dispatch and O&M planning, thereby replacing the commonly used spatially-independent metrics which can mis-estimate the true logistical requirements and costs involved in offshore operations. Looking ahead, there are multiple possible extensions of this work. For example, future analysis can include more operationally relevant met-ocean variables (e.g., wave period, direction) in assessing accessibility and serviceability. Furthermore, while this paper focused on the Mid-Atlantic region, the framework can be directly generalizable to other areas with significant offshore wind potential, including in the United States (e.g., the Pacific coast and Gulf), as well as elsewhere in the world. Additionally, enabled by the probabilistic nature of the met-ocean model, a possible direction is to develop a data-driven simulation framework which can be directly used to inform logistical planning for offshore wind energy development and O&M considering environmental and operational uncertainty. This framework would help establish validated conclusions on how region-to-region and seasonal differences in serviceability scores can impact vessel dispatch decisions, O&M schedules, and overall project availability. Another potentially important aspect is to leverage more information in the vessel’s operational route to derive important probabilistic insights about route-specific fuel consumption, emissions, and costs. This point is particularly relevant as the interest in vessel electrification continues to ramp up, including for offshore wind applications, but also for other ocean-based industries in the broader Blue Economy. 6 Bibliography