On the Difficulties with Late-Time Solutions for the Hubble Tension Preprint: 000-000-000 Prakhar Bansal, Dragan Huterer Abstract We explore the notion that cosmological models that modify the late-time expansion history cannot simultaneously fit the SH0ES collaboration’s measurements of the Hubble constant, DESI baryon acoustic oscillations data, and Type Ia supernova distances. Adopting a few simple phenomenological models, we quantitatively demonstrate that a satisfactory fit with a model with late-time expansion history can only be achieved if one of the following is true: 1) there is a sharp step in the absolute magnitude of Type Ia supernovae at very low redshift, z ∼ 0.01 z\sim 0.01 , or 2) the distance duality relation, d L ​ ( z ) = ( 1 + z ) 2 ​ d A ​ ( z ) d_{L}(z)=(1+z)^{2}d_{A}(z) , is broken. Both solutions are trivial in that they effectively decouple the calibrated SNIa measurements from other data, and this qualitatively agrees with previous work built on studying specific dark-energy models. We also identify a less effective class of late-time solutions with a transition at z ≃ 0.15 z\simeq 0.15 that lead to a more modest improvement in fit to the data than models with a very low-z transition. Our conclusions are largely unchanged when we include surface brightness fluctuation distance measurements, with their current systematic uncertainties, to our analysis. We finally illustrate our findings by studying a physical model which, when equipped with the ability to smoothly change the absolute magnitude of Type Ia supernovae, partially resolves the Hubble tension. I Introduction Recent evidence for the so-called "Hubble tension" – a discrepancy in the measurements of the Hubble constant between low-redshift direct determinations and higher-redshift inferences – has caused waves in cosmology and emerged as a forefront challenge to the standard cosmological model with dark matter and dark energy ( \Lambda CDM). Direct measurements provided by the SH0ES collaboration Riess et al. 2022 indicate that H_{0}=73.04\pm 1.04\,{\rm km\,s^{-1}Mpc^{-1}} . In contrast, parameter inference from the CMB gives H_{0}=67.14\pm 0.47\,{\rm km\,s^{-1}Mpc^{-1}} Aghanim et al. 2020 , while the combination of baryon acoustic oscillation (BAO) measurements from the Data Release 2 of the Dark Energy Spectroscopic Instrument (DESI) and the big bang nucleosynthesis prior gives H_{0}=68.5\pm 0.51\,{\rm km\,s^{-1}Mpc^{-1}} Abdul Karim et al. 2025 . Consequently, measurements by the SH0ES collaboration are 5.2 \sigma and 3.9 \sigma apart from the CMB and BAO+BBN measurements, respectively 1 1 1 The latest measurement of H_{0} from the H0DN collaboration Casertano et al. 2025 raises the Hubble Tension to a 7.1 \sigma level . While there exist multiple other methods for local (at redshift z\ll 1 ) and global ( z\simeq 1 or higher) determination of the Hubble constant, these methods are currently not as mature as the aforementioned measurements that are in tension; see Verde et al. 2019 ; Tully 2023 for reviews. Exploration of possible systematic errors in these measurements and their inability to account for the Hubble tension has caused major effort on the theory front. It is fair to say that no compelling theoretical solution to the Hubble tension has yet been identified. Roughly, these theoretical solutions come in two flavors: those that change the early-universe physics, typically changing the sound horizon, and those that affect the late-time expansion history (for comprehensive reviews, see Di Valentino et al. 2021 ; Schöneberg et al. 2022 ; Abdalla et al. 2022 ). Both kinds of explanations increase the H_{0} inferred from the CMB and BAO to better agree with the SH0ES value. The difficulty of explaining Hubble tension with theoretical models is well known Di Valentino et al. 2021 . Early-time dark-energy solutions to this problem, reviewed in Poulin et al. 2023 , technically work but are very fine tuned. The situation is even more dire with late -time solutions to Hubble tension; it has been pointed out that they are essentially not feasible Poulin et al. 2018 ; Aylor et al. 2019 ; Di Valentino et al. 2019 ; Knox and Millea 2020 ; Dhawan et al. 2020 ; Cai et al. 2022 ; Efstathiou 2025 ; Poulin et al. 2025a ; Pedrotti et al. 2025 except in extremely fine-tuned scenarios Benevento et al. 2020 . The stakes were raised recently with the finding by DESI and other data finding some hints for dynamical dark energy. Adopting the popular parameterization of the equation of state of dark energy w(a)=w_{0}+w_{a}(1-a) Linder 2003 ; Chevallier and Polarski 2001 , where w_{0} and w_{a} are free parameters and a is the scale factor, the analysis of DESI data, combined with cosmic microwave background (CMB) and Type Ia supernovae (SNIa) favor values with w_{0}>-1 and w_{a}<0 , and depart from the standard cosmological model with vacuum energy ( w_{0}=-1,w_{a}=0 ) at the statistical level between 2.8 \sigma and 4.2 \sigma Adame et al. 2025a ; Lodha et al. 2025a ; Calderon et al. 2024 ; Abdul Karim et al. 2025 . This finding, which was followed up widely in the literature (e.g. Cortês and Liddle 2024 ; Berghaus et al. 2024 ; Mukherjee and Sen 2024 ; Park et al. 2024 ; Dinda and Maartens 2025 ; Rebouças et al. 2025 ; Patel et al. 2024 ; Chudaykin and Kunz 2024 ; Jiang et al. 2024 ; Wolf et al. 2024 ; Park et al. 2025 ; Giarè 2025 ; Simon et al. 2025 ; Linder 2024 ; Lewis and Chamberlain 2025 ; Reeves et al. 2025 ; Shajib and Frieman 2025 ; Lodha et al. 2025b ; Giarè et al. 2025 ; Pan and Ye 2025 ; Bansal and Huterer 2025 ; Jedamzik et al. 2025 ; Lee et al. 2025 ; Poulin et al. 2025b ; Cai et al. 2025 ; Herold and Karwal 2025 ; Keeley et al. 2025 ; Li and Wang 2025 ; Ishak et al. 2025 ; Toomey et al. 2025 ) may be related to the Hubble tension, though at present it appears to be separate from it: for example, in the w_{0}w_{a} CDM model, the derived value of the Hubble constant is even farther away from the SH0ES measurement than in \Lambda CDM Abdul Karim et al. 2025 . Our goal in this work is to explain as clearly as possible, and illustrate with simple examples, the difficulty that models that modify late-time expansion history of the universe face to explain the combination of SH0ES measurements of the Hubble constant, data from Type Ia supernovae, and baryon acoustic oscillation measurements from the DESI survey. In order to do so, we do not present a comprehensive scan through classes of dark-energy models, but rather investigate a few parameterized models for the expansion history that, in our view, encompass a range of physical possibilities. We also illustrate results with a physical, albeit fine-tuned, model. Our paper is organized as follows. In Sec. II , we describe the methodology and our models. In Sec. IV , we present our results, while in Sec. VI we give a worked physical example of a model that modifies late-time expansion history in a rather drastic way, yet still does not have a sufficiently good improvement in the fit. We conclude in Sec. VII . Figure 1: Illustration of the inability of low-redshift dark-energy models to simultaneously fit the SH0ES measurements and other cosmological data. In both panels, we show the distance modulus relative to one predicted in the best-fit \Lambda CDM model as a function of redshift, along with the Cepheid measurements by SH0ES collaboration, SNIa data from DESY5, and BAO data from DESI DR2. The top panel shows the scenario in which SNIa are anchored to the SH0ES measurement; then a smooth model is unable to simultaneously fit the SNIa and BAO data in the region where they overlap. The lower panel shows the scenario where the SNIa data are instead anchored to BAO distances (as actually preferred by a global cosmological fit); then the Cepheid measurement is inconsistent with the rest of the Hubble diagram in which it effectively introduces a sharp break. See text for more details. II Methodology, Models and Data We assume a spatially flat cosmology and the validity of general theory of relativity throughout. The transverse and line-of-slight comoving distances are respectively D_{\mathrm{M}}(z)=c\int_{0}^{z}\frac{dz^{\prime}}{H(z^{\prime})};\quad D_{\mathrm{H}}(z)=\frac{c}{H(z)}~, (1) where c is the speed of light. Here the expansion rate can be written in terms of the Hubble constant as H(z)=H_{0}E(z) . We now describe the cosmological models that we consider in this paper. \Lambda CDM  model : In this model the expansion history E(z) takes on the standard expression \displaystyle E(z) \displaystyle=\sqrt{\Omega_{\mathrm{m}}(1+z)^{3}+\Omega_{\mathrm{R}}(1+z)^{4}+(1-\Omega_{\mathrm{m}}-\Omega_{\mathrm{R}})} \displaystyle\Omega_{\mathrm{m}} \displaystyle\equiv\displaystyle\left(\frac{100}{H_{0}}\right)^{2}\left(\Omega_{\mathrm{cdm}}h^{2}+\Omega_{\mathrm{b}}h^{2}\right)\,, (2) where \Omega_{\mathrm{m}},\Omega_{\mathrm{R}},\Omega_{\mathrm{cdm}} , and \Omega_{\mathrm{b}} are respectively energy densities of matter, radiation, cold dark matter and baryons relative to critical, H_{0} is the Hubble constant, and h=H_{0}/(100\,{\rm km\,s^{-1}Mpc^{-1}}) . The SNIa apparent magnitude is given by another standard expression (to be modified in the next two models we introduce further below) m(z)=\mu(z)+M (3) where \mu(z) is the distance modulus defined as \mu(z)=5\log\left(\frac{d_{L}(z)}{1\,{\rm Mpc}}\right)+25 (4) where d_{L}(z)=(1+z)D_{M}(z) is the luminosity distance and z is the redshift. The redshift used in the prefactor here is the helicoentric redshift z_{\text{hel}} from the PantheonPlus catalog. In this model, the parameters are \mathbf{p}^{\Lambda{\rm CDM}}\in\{\Omega_{\mathrm{cdm}}h^{2},\Omega_{\mathrm{b}}h^{2},H_{0}\}. (5) We next consider extended models with more freedom than \Lambda CDM  which aim to better fit the combined cosmological data that include SH0ES. We have assumed a flat cosmological model thus far. As an alternative to flat \Lambda CDM, in our analysis we also briefly consider a curved \Lambda CDM, with one additional parameter, \Omega_{\mathrm{K}} , and with the full parameter set \mathbf{p}^{\Omega_{\mathrm{K}}{\rm CDM}}\in\{\mathbf{p}^{\Lambda\rm CDM},\Omega_{\mathrm{K}}\}. (6) Hstep model : This is the simplest model, in which we allow for a transition in the Hubble parameter at redshift z_{\rm t} . Mathematically, the expansion-rate step transition is defined via H(z)=\begin{cases}H_{0}E(z),&\text{if }z\leq z_{\rm t}\\[2.84544pt] H_{0}^{\rm E}E(z),&\text{if }z>z_{\rm t}\end{cases} (7) where H_{0}^{\rm E} is a new parameter in general different from the late-time Hubble constant H_{0} . In this model, the matter density corresponds to the the early-time physical density in mass, that is \Omega_{\mathrm{m}}\equiv\displaystyle\left(\frac{100}{H_{0}^{\rm E}}\right)^{2}\left(\Omega_{\mathrm{cdm}}h^{2}+\Omega_{\mathrm{b}}h^{2}\right). (8) The parameters in this model are \mathbf{p}^{\rm Hstep}\in\{\mathbf{p}^{\Lambda\rm CDM},H_{0}^{\rm E},z_{\rm t}\}. (9) where \mathbf{p}^{\Lambda\rm CDM} is the parameter set in \Lambda CDM listed in Eq. ( 5 ). There are therefore two additional parameters in this model relative to the standard cosmological constant plus cold-dark-matter scenario. Mstep model : In this model, we allow for a sharp change in the absolute magnitude of SNIa at the transition redshift z_{t} , but keep all other properties as in \Lambda CDM. The new parameters in the model are the magnitude change and the redshift at which it occurs z_{\rm t} ; the apparent magnitude is now given by m(z)=\begin{cases}\mu(z)+M,&\text{if }z\leq z_{\rm t}\\[2.84544pt] \mu(z)+M^{\rm E},&\text{if }z>z_{\rm t}\end{cases} (10) where M^{\rm E} is a new parameter, different in general from the late-time absolute magnitude M , and z_{\rm t} is the transition redshift. The parameter set is then \mathbf{p}^{\rm Mstep}\in\{\mathbf{p}^{\Lambda\rm CDM},M^{\rm E},z_{\rm t}\}, (11) Similar to the Hstep model, the Mstep model also contains two additional parameters relative to \Lambda CDM. Hstep+Mstep model : Here, we allow for both a transition in the absolute magnitude of SNIa at the transition redshift z_{\rm tM} and a transition in the Hubble parameter at redshift z_{\rm tH} . The M transition is described in Eq. ( 10 ), while the H transition is defined as in Eq. ( 7 ). The parameters in this model are \mathbf{p}^{\rm Hstep+Mstep}\in\{\mathbf{p}^{\Lambda\rm CDM},M^{\rm E},H_{0}^{\rm E},z_{\rm tM},z_{\rm tH}\}. (12) There are therefore four additional parameters in this model relative to \Lambda CDM. w_{0}w_{a} +Mstep model : Finally, we use the more flexible ( w_{0},w_{a} ) parametrization Linder 2003 to model the expansion history and similar to previous models, allow for a transition in the absolute magnitude of SNIa at the transition redshift z_{t} . The M transition is same as described in Eq. ( 10 ), while the Hubble parameter in the ( w_{0},w_{a} ) model is given by \displaystyle H(z) \displaystyle=H_{0}\Big[\,\Omega_{m}(1+z)^{3}+\Omega_{R}(1+z)^{4}\;+ (13) \displaystyle(1-\Omega_{m}-\Omega_{R})(1+z)^{3(1+w_{0}+w_{a})}\exp\!\left(-\frac{3w_{a}z}{1+z}\right)\,\Big]^{1/2}. The parameters of this model are \mathbf{p}^{w_{0}w_{a}\rm+Mstep}\in\{\mathbf{p}^{\Lambda\rm CDM},w_{0},w_{a},M^{\rm E},z_{\rm t}\}. (14) Similar to Hstep+Mstep model, there are four additional parameters in this model relative to \Lambda CDM. To carry out our analysis, we modify the cosmological code CAMB Lewis et al. 2000 to compute the background quantities like Hubble rate, distances and supernova magnitudes in our modified-H model. To obtain the constraints on the cosmological parameters of our model we use Monte Carlo Markov Chain (MCMC) sampler in Cobaya Torrado and Lewis 2021 . For our MCMC chains, we use the default convergence criteria of Gelman and Rubin R statistic < 0.01. To calculate the means, confidence intervals and likelihood distributions for our model parameters, we use GetDist Lewis 2019 code with our converged MCMC chains. We make use the following data sets: DESI DR2 BAO. We use the measurements from the DESI BAO analysis from its second data release (henceforth DESI DR2 BAO, or just DESI), and adopt the 12 distance measurements, and their covariance, as quoted in Table I of Adame et al. 2025a and validated in supporting DESI DR2 publications Adame et al. 2025b ; Adame et al. 2025c . To make our analysis simple and as model-independent as possible, we do not use the additional information from the full-shape clustering of DESI sources Adame et al. 2025d . Compressed CMB data. As explained in Bansal and Huterer 2025 , for the class of models explored in this paper, it is not possible to use the full CMB power-spectrum-based likelihood. Hence, we rely on the compressed CMB likelihood Bansal and Huterer 2025 which involves the “shift" parameter R , the angular location \ell_{a} as well as the physical baryon density \Omega_{\mathrm{b}}h^{2} Calibrated SNIa: We make use of the full PantheonPlus+SH0ES catalog, including the calibrator sample, following the procedure adopted in the official analysis ( Brout et al. 2022 ; Scolnic et al. 2022 ; Riess et al. 2022 ) . The PantheonPlus compilation consists of distance modulus measurements from 1701 light curves of 1550 spectroscopically confirmed Type Ia supernovae spanning the redshift range 0.0011 ). We implemented this model by modifying hi_class Zumalacárregui et al. 2017 and used cobaya Torrado and Lewis 2021 to run the minimiser iminuit James and Roos 1975 using the combined DESI DR2 BAO + CMB + PantheonPlus + SH0ES data. We find that the best-fit to this model with a non-minimally coupled scalar field and a time-varying G gives a \Delta\chi^{2}=-27 over the best-fit \Lambda CDM. This is further illustrated in Fig. 4 which shows the Hubble diagram corresponding to the best-fit non minimal coupling model along with the data used. The success of the model comes from its ability to accommodate the change in the absolute magnitude M , which has been implemented via a time-varying gravitational constant. [It is useful to again refer to Fig. 1 to understand what is needed for a successful model.] Specifically, we find that the best-fit model favors a transition relative to \Lambda CDM of \Delta M\simeq-0.1 that smoothly takes place over a range of redshifts around z_{\rm t}\simeq 0.1 – 0.2 . Note that the non-minimally coupled scalar field model without the M transition would only achieve \Delta\chi^{2}\simeq-10 relative to \Lambda CDM, again illustrating the importance of the absolute-magnitude transition. Conversely, the fact that the goodness of fit of the model with a smooth M transition is \Delta\chi^{2}=-27 rather than \simeq-40 as with the Mstep (or Hstep+Mstep) models discussed in Sec. IV is that the scalar-field model’s transition is gradual and at an intermediate redshift ( z_{\rm t}\sim 0.15 ), rather than sharp and at a much lower redshift ( z_{\rm t}\simeq 0.01 ), the latter of which would better fit data that includes SH0ES. This is further discussed in Appendix C . We have identified one more interesting feature of the scalar-field model studied in this section: its best-fit value of the Hubble constant is \simeq 72\,{\rm km\,s^{-1}Mpc^{-1}} , even higher than that in models with a sharp step in M with transition specified at z_{\rm t}\simeq 0.15 (which give H_{0}\simeq 70\,{\rm km\,s^{-1}Mpc^{-1}} ; see Table 3 ). The reason for this high H_{0} is the fact that the gradual transition in the expansion history enabled by the scalar-field model fits data better than the sharp transition at z_{\rm t}\simeq 0.15 in our Hstep+Mstep model; this can be seen by comparing Fig. 4 with the lower panel of Fig. 6 . The scalar-field model’s gradual H transition also fits data better than the z_{\rm t}\simeq 0.15 Mstep model even when the latter is embedded in a w_{0}w_{a} CDM background. This is further discussed in Appendix C , while Table 3 has more details about the derived parameters of the scalar-field model compared to two phenomenological step-models, as well as \Lambda CDM. Overall, the scalar-field model with a non-minimal coupling and an M transition serves a useful purpose of illustrating what precisely is required in order to fit the combination of SH0ES and other cosmological data. It could be that a model like this, perhaps better motivated by compelling theory or else favored by other data in cosmology, will prove to be useful in explaining the Hubble tension. VII Conclusions We have investigated the notion that low-redshift modifications to expansion history face very steep challenges to resolve the Hubble tension. To better understand this thesis, we studied several simple phenomenological models that modify expansion history and/or introduce a jump in the absolute magnitude of Type Ia supernovae. In order to gain more understanding about what the data are indicating, we also studied a physical model of dark energy that is fine-tuned for the purposes of explaining the Hubble tension. We studied how these models fit the combined SH0ES+SNIa+BAO+CMB data. Instead of adopting the M -prior or H_{0} -prior commonly found in the literature, we instead employed the full SH0ES data in order to properly quantify the corresponding \Delta\chi^{2} values. We also clarified some subtleties associated with using an M prior, and emphasized that care must be taken to avoid double-counting information when such a prior is applied. We found that a sharp transition in the expansion rate does not appreciably improve the fit to data relative to the standard \Lambda CDM model; this remains true even when allowing a more flexible expansion history accommodated by the ( w_{0},w_{a} ) model. This occurs because, when the model is fit to the BAO data calibrated by Planck \Lambda CDM  sound horizon, the resulting expansion anchors the normalization of the SNIa in order to agree with the BAO and the theoretical model, and this normalization anchors the absolute magnitude M to a value that is approximately 5\sigma away from that preferred by the Cepheid calibrators. In contrast, a sharp step in the absolute magnitude of Type Ia supernovae at redshift z_{\rm t}\simeq 0.01 works much better; it improves the overall fit to the data by \Delta\chi^{2}\simeq-40 . It is easy to derive a back-of-envelope value of the magnitude step preferred by these models: if we write the SNIa apparent magnitude as m=5\log_{\rm 10}(H_{0}d_{L}(z))+\mathcal{M} , where d_{L} is the luminosity distance at a given redshift, then the nuisance parameter that combines the absolute magnitude M and the Hubble constant H_{0} is defined by ( Huterer 2023 , e.g.) \mathcal{M}\equiv M-5\log_{\rm 10}(H_{0}\times 1\,{\rm Mpc})+25. (21) Then the desire to keep \mathcal{M} to whatever SNIa measurements favor it to be, but to somehow lower H_{0} from \sim 67\,{\rm km\,s^{-1}Mpc^{-1}} that is favored at higher redshifts to \sim 73\,{\rm km\,s^{-1}Mpc^{-1}} favored at z\rightarrow 0 , immediately implies that M should increase by about 0.15 – 0.18 magnitudes. This is indeed the jump that the various Mstep models favor (see the typical differences between M and M^{\rm E} in Table 1 ). However these "Mstep" solutions are trivial, as they effectively decouple the SH0ES measurements and allows an arbitrary normalization of SNIa Hubble diagram. This is similar to another known possibility for explaining the Hubble tension, the decoupling of the Etherington distance duality relation d_{L}=(1+z)^{2}d_{A}(z) ; it too is trivial as it allows for a separate anchoring of SNIa measurements relative to those from the CMB and BAO. We also found that models with a transition in the absolute magnitude M at an intermediate redshift, z_{\rm t}\simeq 0.15 , while not as successful as models with the transition at very low redshift, nevertheless lead to a somewhat acceptable fit to the data ( \Delta\chi^{2}\simeq-16 relative to \Lambda CDM). The reason that the physical scalar-field model, which also accommodates the M transition at intermediate redshift, does better ( \Delta\chi^{2}\simeq-27 ) is because its M and Hubble transitions are more gradual and the data mildly prefer that. Interestingly, scalar-field models with an M transition also result in the Hubble constant of H_{0}\simeq 72\,{\rm km\,s^{-1}Mpc^{-1}} , which is among the highest among the models that we studied. We repeated the above analysis by including the surface brightness fluctuations (SBF) dataset, which is calibrated independently from the SH0ES Cepheid distance scale. Given the current level of uncertainty in these measurements, the inclusion of SBF distances does not lead to a significant change in our principal conclusions. In an idealized scenario where systematic uncertainties are neglected, we find that improved SBF precision can have a noticeable impact on the results and may help further test magnitude-transition–type solutions to the Hubble tension. Finally, we have also studied a previously proposed physical model of dark energy with the non-minimal coupling to gravity. This model by itself could not resolve the Hubble tension and fit the combined data because, as discussed above, even an arbitrary change to the low-z expansion history is insufficient to succeed in this. However, when “fortified" by the late-time temporal change in Newton’s constant that is conjectured to lead to a jump in the Chandrasekhar mass and hence the absolute magnitude of SNIa, the model succeeds in providing a reasonably good fit to the data (the aforementioned \Delta\chi^{2}\simeq-27 relative to \Lambda CDM). Despite such partial successes, our general conclusion is that the only models that fit data much better than \Lambda CDM are the ones with an M transition at very low redshift, z_{\rm t}\simeq 0.01 . Those models are trivial in that they explicitly decouple of the SH0ES measurements of the anchors of the distance ladder from the higher-redshift SNIa and BAO measurements. A similar conclusion applies to models that induce breaking of the Etherington relation which links the angular-diameter distance and luminosity distance; this relation is considered extremely robust and holds even in beyond-FLRW models, and its breaking would also resolve the Hubble tension trivially as it would decouple the SNIa Hubble diagram from that of the BAO. An even more far-fetched low-redshift solution to the Hubble tension would be to postulate a "just-so" expansion history where the theoretical prediction for the distance-redshift relation rapidly wiggles to pass through the SNIa and BAO data in the overlapping redshift range where they have different overall normalizations (see the shaded region in Fig. 1 ). These conclusions are unlikely to be changed in models that allow an even more flexible smooth late-universe expansion history, as those models have fits that are comparable to, and not much better than, ( w_{0},w_{a} ) (e.g. Bansal and Huterer 2025 ). Acknowledgments. This work has been supported by the Department of Energy under contract DE-SC0019193. PB thanks William Wolf for several useful discussions related to the non-minimal coupling model and its implementation in hi_class . We also thank John Blakeslee, Pedro Ferreira, Vivian Poulin, Adam Riess, and Dan Scolnic for useful discussions and comments on earlier versions of the manuscript. Appendix A On the subtleties of using M prior In the analysis above, we have used the full PantheonPlus+SH0ES dataset, which consistently accounts for the Cepheid-calibrated supernovae. In the literature, however, it is common to adopt a Gaussian prior on the absolute magnitude of SNe Ia, M . Care must be taken when employing this prior in order to avoid double-counting. The widely used prior, M=-19.253\pm 0.027 , comes from the SH0ES collaboration. It is important to recall how this value is derived. In their analysis to constrain H_{0} , the SH0ES team does not use the full high-redshift PantheonPlus sample, but instead restricts to SNe Ia at z<0.15 , where the statistical weight is sufficient. From this low-redshift sample, they obtain H_{0}=73.04\pm 1.04 and M=-19.253\pm 0.027 Riess et al. 2022 . When this M prior is applied together with the full PantheonPlus sample (often with a low-redshift cut of z>0.01 ), it effectively double-counts the SNe in the range 0.01