Instability of G/M/c queues under stochastic resetting in the interval Preprint: APS/123-QED José Giral-Barajas, Paul C. Bressloff Abstract Proper management of resources whose arrival and consumption are subject to environmental randomness is an intrinsic process in both natural and artificial systems. This phenomenon can be modeled as a queuing process whose arrival distribution is determined by a search process with stochastic resetting. When the queuing system has a limited number of servers and the search process occurs within a bounded domain, the dynamics of expediting or delaying the search through stochastic resetting interact with the long-term dynamics of the number of resources in the queue. We combine results from queuing theory with those from search processes with stochastic resetting in a bounded domain to obtain regions of the parameter space of the search process that ensure convergence of the number of resources in the queue to a steady state. Furthermore, we find a threshold resetting rate at which the effects of stochastic resetting shift from reducing convergence regions to expanding them. Finally, we demonstrate that this threshold value grows exponentially with the number of servers, making it harder for stochastic resetting to improve the convergence of the queueing system. I Introduction A topic of major interest is the time it takes a particle diffusing within a bounded domain \Omega to find a specific target \mathcal{U}\subseteq\Omega Grebenkov et al. 2024 . Examples include biochemical reaction kinetics Weiss 1967 ; Bénichou et al. 2010 ; Kumar 2023 ; Barman et al. 2025 , cellular transport Bressloff and Newby 2013 ; Iyer-Biswas and Zilman 2016 ; Bressloff 2020a ; Stotsky et al. 2021 , and animal foraging Fauchald and Tveraa 2003 ; Bénichou et al. 2005 ; Viswanathan et al. 2008 ; Bidari et al. 2022 . This phenomenon is frequently modeled as a Brownian motion in \Omega with a totally absorbing boundary in the inner boundary \partial\mathcal{U} and a reflecting boundary in the outer boundary \partial\Omega . In scenarios like this, in which \Omega is bounded, the mean time to find the target is finite, and the behavior of the first-passage time (FPT) is well understood Redner 2001 . A common assumption made in studies concerning FPTs is that the process terminates once the searcher finds the target \mathcal{U} Metzler et al. 2014 . This can be thought of as a searcher-centric model . However, there are several examples of search processes in which the searcher delivers cargo upon finding the target, then continues, allowing the searcher to return to its initial position, reload cargo, and restart the search. In the long term, repeating these steps leads to the accumulation of resources within the target. Therefore, this scenario can be thought of as a target-centric model . Figure 1: Sequence of search-and-capture events for a diffusing particle in the interval with an absorbing boundary at the origin and a reflecting boundary at the endpoint mapped into a G/M/c queueing process. (a) The particle follows a one-dimensional (1D) Brownian motion starting from x_{0}\in[0,L] and searching for the target at x=0 . Once the particle finds the target, it delivers a resource, returns to its starting position, and restarts the process. In each round, the delivery, return, and reload take a random time \hat{\tau} . Repeating this process produces a sequence of delivery times, known as the sequence of bursts. (b) Under the additional assumption that the random consumption times are exponentially distributed, the sequence of bursts can be fed into a G/M/c queueing process to track the accumulation of resources within the target. The target-centric model has been explored recently by allowing a search process to return to its initial position to reload and restart the search after finding the target Bressloff and Kim 2019 . The total time it takes the particle to unload the cargo, return to the initial position, and reload is described by the refractory period \hat{\tau} . This refractory period can be treated as a random variable with probability density function \varphi(\hat{\tau}) and mean \tau_{\mathrm{cap}} . This is illustrated in Fig. 1 (a). The repetition of these steps is commonly known as a search-and-capture process and has been explored in different scenarios Bressloff and Kim 2019 ; Bressloff 2020b ; Bressloff 2021 . The search-and-capture process produces a sequence of delivery times, which we refer to as burst events; see Fig. 1 (a). As time progresses, the number of bursts increases, and resources begin to accumulate in the target. To counterbalance the buildup in the number of resources, we assume that the target is consuming the available, accumulated resources. With this additional assumption, the number of resources in the target can be tracked using a queuing process Bressloff 2020c ; Giral-Barajas and Bressloff 2025 , see Fig. 1 (b). A queueing process models the number of randomly arriving customers in a system with a fixed number of servers, each providing service at a random time Bhat 2015 . Therefore, the resources in the target are mapped to the customers in the queueing process. A queueing system is determined by its maximum capacity, the queue discipline—referring to the order in which customers receive their service—, the customers’ arrival distribution, the customers’ service distribution, and the number of servers Allen 1978 . Under the additional assumptions that the target has an infinite capacity and a first-come, first-served (FCFS) discipline, a queue process can be described using Kendall’s shorthand notation A/B/c , where A describes the inter-arrival time distribution, B the service time distribution, and c the number of servers Kendall 1953 . When the accumulated resources are being consumed by a finite number, c<\infty , of service stations with exponential service time distribution—i.e., Markovian service times—, the number of resources within a target being delivered by a search-and-capture process can be modeled with a G/M/c system Giral-Barajas and Bressloff 2025 . Here G denotes a general (non-Markovian) inter-arrival time distribution, \mathcal{F}_{0}(t) , determined by the search-and-capture process, and M denotes Markovian service times. This mapping allows us to study the long-term behavior of the number of resources in the target by leveraging the wide range of results from classical queuing theory, in particular those from the G/M/c system. It is known that there exists a steady-state number of customers in the G/M/c system if and only if the customer arrival rate, \lambda , is lower than the total customer service rate, c\mu , where \mu is the service rate per server Takács 1962 . This condition can be rewritten as \rho<1 where \rho=\lambda/(c\mu) is known as the traffic intensity Cooper 1981 . In a recent work, we utilized this result to determine zones of convergence to a steady-state number of customers in the parameter space of the search process in a one-dimensional (1D) bounded interval Giral-Barajas and Bressloff 2025 . In particular, for fixed interval length, diffusivity, starting position and service rate there exists a crossover initial position, x_{0}^{*} , for which the number of resources in the G/M/c system associated with the target converges to a steady state if and only if x_{0}>x_{0}^{*} . Therefore, starting the process closer than x_{0}^{*} to the target is detrimental for the long-term stability of the number of resources. Another topic of current interest is search processes with stochastic resetting Evans et al. 2020 . A typical motivating example is a diffusing particle searching for a specific target \mathcal{U} in an unbounded domain \Omega . The introduction of stochastic resetting, in which the particle is allowed to reset to a given position x_{r}\in\Omega following a sequence of random times with resetting rate r , renders the mean first passage time (MFPT) finite Evans and Majumdar 2011a . Moreover, the MFPT can be optimized in terms of the resetting rate Evans and Majumdar 2011b ; Evans and Majumdar 2014 . There are several stochastic processes showing this behavior, including Lévy flights Kusmierz et al. 2014 ; Kuśmierz and Gudowska-Nowak 2015 , run-and-tumble particles Evans and Majumdar 2018 , processes with resetting in a potential landscape Pal 2015 ; Ray and Reuveni 2020 ; Roberts et al. 2024 , and processes in bounded domains Durang et al. 2019 ; Pal and Prasad 2019a . It is well understood that resetting can expedite the search process and optimize the MFPT as a function of the resetting rate Evans and Majumdar 2011a . This fact is particularly relevant for search processes in unbounded domains whose behavior is null recurrent, as is the case for diffusion processes in unbounded domains Evans and Majumdar 2011b ; Evans and Majumdar 2014 . However, scenarios in which the process is intrinsically positive recurrent, and the MFPT is finite without the need for resetting, require further analysis to determine when resetting expedites the search process Christou and Schadschneider 2015 ; Pal and Prasad 2019b ; Pal et al. 2022 ; Méndez et al. 2022 . The particular scenario of a diffusing particle in a 1D interval with two absorbing boundaries has been thoroughly explored in Ref. Pal and Prasad 2019a . Said work introduces a threshold subregion of the interval [0,L] defined as \mathcal{D}:=(0,x_{0-})\cup(x_{0+},L) where x_{0\pm}=(5\pm\sqrt{5})/10 , such that if x_{r}\in\mathcal{D} resetting is capable of expediting the search process and if x_{r}\notin\mathcal{D} resetting will always increase the unconditional MFPT. In the searcher-centric approach, this acceleration of the search process is usually interpreted as beneficial. However, in the target-centric approach, expediting the search process and reducing the MFPT can push the number of resources in the target out of equilibrium, break convergence to a steady state, and shift the process dynamics toward unbounded growth. The main goal of this paper is to explore how stochastic resetting affects convergence to the steady-state distribution of the number of resources in a G/M/c queueing system arising from a search-and-capture process driven by a diffusing particle in a 1D bounded interval. To do so, we combine results for the threshold subset of initial positions allowing expediting of the search process by the introduction of stochastic resetting, \mathcal{D} , from Ref. Pal and Prasad 2019a and results for the threshold convergence-inducing starting position, x_{0}^{*} , from Ref. Giral-Barajas and Bressloff 2025 to derive new regions of convergence in the parameter space. This paper is organized as follows. In Section II we introduce the modelling rationale and present previous results of first-passage processes, queuing theory, and stochastic resetting, which will serve as building blocks for the main results of the paper. In Section III , we extend the results for the regions of convergence in the parameter plane (L,x_{0}) and for the critical starting position to consider the effects of stochastic resetting while fixing the resetting rate. We analyze the effects of resetting and find a threshold interval length, L_{\text{eq}} , for which the inclusion of resetting at the predefined fixed resetting rate changes the convergence zone from widening to shrinking. Finally, in Section IV , we analyze the critical regions for a fixed interval length while varying the resetting rate. We derive conditions that ensure the region of starting positions for the search process allowing resetting to expedite the process intersects the region of starting positions that ensure convergence of the queueing system to a steady state, and explore this scenario. We find a threshold resetting rate, r_{\text{eq}} , for which the effects of resetting change from shrinking the convergence zone to widening it, and a resetting rate, r_{\text{max}} , that maximizes the critical, convergence-inducing starting position and minimizes the length of the convergence zone. We conclude by analyzing the behavior of r_{\text{eq}} and r_{\text{max}} as the number of servers in the G/M/c queueing system increases. II Search-and-capture, queueing theory and resetting in the interval In this section, we present previous results on first-passage processes, queueing theory, and stochastic resetting and establish the modelling rationale. We then build on these results in subsequent sections. II.1 Search-and-capture events in an interval without resetting Consider a searching particle subject to a Brownian motion inside a 1D bounded domain [0,L] with an absorbing target at 0 and a reflecting boundary at L , see Fig. 1 (a). We denote by X_{t} the particle’s position at time t and by p(x,t|x_{0}) the probability density function for the particle to be in x at time t , having started at x_{0} . This probability density function evolves according to the diffusion equation \frac{\partial p(x,t|x_{0})}{\partial t}=D\frac{\partial^{2}p(x,t|x_{0})}{\partial x^{2}}=-\frac{\partial J(x,t|x_{0})}{\partial x}\;, (1) where D is the diffusivity and J(x,t|x_{0}):=-D\partial_{x}p(x,t|x_{0}) is the probability flux . This diffusion equation is supplemented with an absorbing boundary condition at 0, p(0,t|x_{0})=0 , a reflecting boundary condition at L , \partial_{x}p(L,t|x_{0})=0 , and the initial condition p(x,0|x_{0})=\delta(x-x_{0}) . Define the FPT to be absorbed by the target at 0 as \mathcal{T}_{0}(x_{0}):=\inf\{t>0:X_{t}=0,\;X_{0}=x_{0}\}\;, (2) As there is only one absorbing target, the FPT’s probability density function, denoted by f_{0}(x_{0},t) , is equivalent to the probability flux into the target, denoted by J_{0}(x_{0},t) , f_{0}(x_{0},t)=J_{0}(x_{0},t)=D\frac{\partial p(x,t|x_{0})}{\partial x}\Big|_{x=0}\;. (3) Hereafter, we will use the probability flux into the target and the FPT’s probability density function interchangeably. We can now compute the probability that the particle eventually gets absorbed by the target, commonly called the splitting probability , as \pi_{0}(x_{0}):=\mathbb{P}[\mathcal{T}_{0}(x_{0})<\infty]=\int_{0}^{\infty}J_{0}(x_{0},t^{\prime})\mathop{}\!\mathrm{d}t^{\prime}=\widetilde{J}_{0}(x_{0},0)\;, (4) where \widetilde{J}_{0}(x_{0},s) denotes the Laplace transform of the probability flux into the boundary, defined by \widetilde{J}_{0}(x_{0},s)=\int_{0}^{\infty}e^{-st}J_{0}(x_{0},t)\mathop{}\!\mathrm{d}t\;. Additionally, the MFPT can be described in terms of the probability flux in Laplace space. From Eq. ( 3 ) we directly have that \widetilde{f}_{0}(x_{0},s)=\widetilde{J}_{0}(x_{0},s) , from where we obtain that T_{0}(x_{0}):=\mathbb{E}[\mathcal{T}_{0}(x_{0})]=-\frac{\partial}{\partial s}\widetilde{J}_{0}(x_{0},s)\Big|_{s=0}\;. (5) Therefore, all the quantities of interest for the search process can be described via the Laplace transform of the probability flux into the target, \widetilde{J}_{0}(x_{0},s) . An explicit expression for \widetilde{J}_{0}(x_{0},s) can be found using the Green’s function for a diffusing particle inside an interval with an absorbing boundary at the origin and a reflecting boundary at the endpoint Redner 2001 \widetilde{J}_{0}(x_{0},s)=\frac{\cosh\left[\sqrt{\frac{s}{D}}(L-x_{0})\right]}{\cosh{\left[\sqrt{\frac{s}{D}}L\right]}}\;. (6) Combining Eq. ( 6 ) with Eqs. ( 4 - 5 ), we obtain explicit expressions for the splitting probability and the MFPT \displaystyle\pi_{0}(x_{0}) \displaystyle= \displaystyle 1\;, (7a) \displaystyle T_{0}(x_{0}) \displaystyle= \displaystyle\frac{(2L-x_{0})x_{0}}{2D}\;. (7b) As mentioned in the introduction, each time the searcher finds the target, it delivers a resource and, instead of terminating the process, it returns to its starting position to reload cargo and start a new search. This shifts the process’s focus from the searcher to the target, accumulating the resources delivered in each burst event. The behavior of the burst events is completely determined by their inter-arrival times. Given that the search-and-capture cycles are independent, the sequence of inter-arrival times is a sequence of independent, identically distributed random variables (iidrv). We denote the n th inter-arrival time by \Delta_{n} and have that \Delta_{n}=\tau_{n}-\tau_{n-1}\stackrel{{\scriptstyle d}}{{=}}\hat{\tau}+\mathcal{T}(x_{0})\;,\; (8) Figure 2: Critical spatial configurations for the existence of a steady-state distribution with instantaneous refractory periods. (a) The threshold starting position of the search process ensures that the number of resources in the G/M/c system converges to a steady state. Each curve is determined by Eq. ( 12 ) as a function of L , fixing D=1 , \mu=1 , and \tau_{\mathrm{cap}}=0 and varying the number of servers in the system. The green dots represent the threshold interval length, L^{*} , determined by Eq. ( 13 ). (b) Critical initial position and convergence and blow up zones for an interval of length L=2 and different numbers of servers. This representation identifies with the endpoints of the curves in panel (a), when L=2 . Whenever x_{0}>x_{0}^{*} , the number of resources converges to a steady state, and whenever x_{0}\leq x_{0}^{*} , the number of resources blows up. where \tau_{n} denotes the time of the n th burst event and \Delta_{n}\stackrel{{\scriptstyle d}}{{=}}\hat{\tau}+\mathcal{T}(x_{0}) denotes equality in distribution. From Eq. ( 8 ), we have that the mean inter-arrival time is given by T_{0}(x_{0})+\tau_{\mathrm{cap}} and the mean bursting rate is \lambda=(T_{0}(x_{0})+\tau_{\mathrm{cap}})^{-1} . Moreover, the inter-arrival time density, denoted by \mathcal{F}_{0} , can be directly computed as the convolution of the FPT density and the refractory period’s density. Dropping the dependance on x_{0} from the notation, we have that \mathcal{F}_{0}(t)=\int_{0}^{t}f_{0}(t^{\prime})\varphi(t-t^{\prime})\mathop{}\!\mathrm{d}t^{\prime}\;. (9) Laplace transforming Eq. ( 9 ) yields \widetilde{\mathcal{F}}_{0}(s)=\widetilde{f}_{0}(s)\widetilde{\varphi}(s)\;. (10) II.2 Convergence zones for the G/M/c without resetting As highlighted in the introduction, the accumulation of resources after several rounds of the search-and-capture process can be mapped onto a queueing process. To do so, we need to determine the departure process to counterbalance the continual arrival coming from the search-and-capture process. Heuristically, two scenarios counteract accumulation: degradation and consumption. In the case of degradation, each resource begins service independently of the others upon its arrival. In the case of consumption, where the system has a finite number of servers to consume resources, the start of service for each resource is subject to server availability—determined by the number of resources present in the system upon arrival. Assuming service times follow an exponential distribution, these two scenarios correspond to distinct types of queuing processes. When resources are subject to degradation, the accumulation can be modeled with a G/M/\infty queue. When the target consumes resources, the accumulation can be modeled with a G/M/c queue. In both cases, G represents a general (non-Markov) inter-arrival time distribution, and M represents a Markovian service time distribution. In the first case, \infty denotes an infinite number of servers, while in the second case, there is a finite number of servers, c . These models behave differently over long periods. While the number of resources in the G/M/\infty system always converges to a steady state, the convergence of the G/M/c system depends on traffic intensity. Thus, the number of resources in the G/M/c system converges to a steady state if and only if \rho:=\frac{\lambda}{c\mu}<1\;, (11) where \lambda^{-1} is the mean inter-arrival time and \mu^{-1} is the mean service time Cooper 1981 . Note that the mean inter-arrival time for the burst events generated by the search and capture process is given by T_{0}(x_{0})+\tau_{\mathrm{cap}} , where T_{0}(x_{0}) is the MFPT of the search process, given by Eq. ( 7b ) for our setting of a 1D Brownian motion within an interval with a single absorbing target at the origin. In a recent work, we studied the convergence of a G/M/c queue emerging from a search-and-capture process in a bounded interval. In particular, we combined the condition for convergence in Eq. ( 11 ) with the explicit expression of the MFPT in Eq. ( 7b ) to derive the following condition for convergence to a steady-state number of resources Giral-Barajas and Bressloff 2025 : x_{0}>x_{0}^{*} where x_{0}^{*}=L-\sqrt{L^{2}-\frac{2D}{c\mu}+2D\tau_{\mathrm{cap}}}\;. (12) We also obtained a minimal interval length that ensures the existence of regions in the search process’s parameter space that allow the G/M/c system to converge to a steady state: L^{*}=\sqrt{\frac{2D}{c\mu}-2D\tau_{\mathrm{cap}}}\;. (13) To do so, we equated x_{0}^{*} , given by Eq. ( 12 ), to L and solved the resulting equation for L . This crossover interval length can be interpreted as follows. If the search process occurs in an interval of length L\leq L^{*} , with L^{*} determined by fixed values of D , \mu , \tau_{\mathrm{cap}} , and c , the number of resources accumulated in the target at 0 will blow up regardless of the initial position, see Fig. 2 (a). On the contrary, if L>L^{*} , there exists a subregion of the interval, given by (x_{0}^{*},L] , such that if the search process starts in said region, the number of resources in the target converges to a steady state, see Fig. 2 (b) II.3 Stochastic resetting in the interval Now suppose that in each round of the search-and-capture process, the particle is allowed to instantaneously reset with rate r to its starting position before delivering its current cargo to the target, according to a sequence of independent random times, each following the same distribution \psi(t) , see Fig. 3 . Stochastic resetting has been explored using renewal theory for non-instantaneous protocols and general resetting distributions Rotbart et al. 2015 ; Belan 2018 ; Chechkin and Sokolov 2018 ; Bressloff 2020d ; Bodrova and Sokolov 2020 . However, for the sake of concreteness, we limit this work to the scenario of instantaneous, exponential resetting, i.e. \psi(t)=re^{-rt} . Figure 3: Sample path of a search-and-capture process with instantaneous resetting and instantaneous refractory periods. The resetting position is assumed to be the same as the initial position, i.e., x_{0}=x_{r} . The dynamics introduced by stochastic resetting are shown in orange, straight arrows, and the restart dynamics of the search-and-capture process are shown in dotted lines. The Laplace transform of the FPT density and the MFPT have been derived for the instantaneous exponential resetting scenario Bressloff 2020c ; Reuveni 2016 . Denoting by f_{r}(x_{0},t) de FPT density with resetting and by T_{r}(x_{0}) the MFPT density with resetting, we have that \widetilde{f}_{r}(x_{0},s)=\frac{(r+s)\widetilde{f}_{0}(x_{0},r+s)}{s+r\widetilde{f}_{0}(x_{0},r+s)}\;, (14) and T_{r}(x_{0})=\frac{1-\widetilde{f}_{0}(x_{0},r)}{r\widetilde{f}_{0}(x_{0},r)}\;. (15) Substituting the explicit expression for \widetilde{f}_{0} in Eq. ( 6 ) into the expression for the MFPT time we obtain T_{r}(x_{0})=\frac{1}{r}\left[\frac{\cosh\left[\sqrt{\frac{r}{D}}L\right]}{\cosh{\left[\sqrt{\frac{r}{D}}(L-x_{0})\right]}}-1\right]\;. (16) As mentioned in the introduction, when the search process is intrinsically positive recurrent and the MFPT is finite, the inclusion of stochastic resetting can delay the process and increase the MFPT. This is the case for a diffusing particle in a 1D interval with an absorbing boundary at the origin. To determine whether or not the MFPT with resetting can be improved and has at least one critical point, one needs to analyze the sign of the derivative \mathop{}\!\mathrm{d}T_{r}/\mathop{}\!\mathrm{d}r at r=0 Pal and Prasad 2019a ; Reuveni 2016 ; Pal et al. 2020 . When the derivative is negative, stochastic resetting can expedite the search process in the small- r regime. This condition is equivalent to \frac{\sigma_{0}(x_{0})}{T_{0}(x_{0})}>1\;, (17) where \sigma_{0}^{2}(x_{0})=\text{Var}(\mathcal{T}_{0}(x_{0})) Pal and Reuveni 2017 . It can be shown that for 1D Brownian motion in the interval [0,L] with an absorbing boundary at the origin, the inequality in Eq. ( 17 ) is fulfilled if and only if x_{0}\in\mathcal{X}_{0}:=\left(0,\left[1-\frac{1}{\sqrt{5}}\right]L\right)\;. (18) For the complete computations, see Appendix A . Therefore, as long as x_{0}\in\mathcal{X}_{0} , the MFPT as a function of the resetting rate is non-monotonic and initially decreasing. This ensures that there exists a subset of resetting rates r>0 for which resetting expedites the search process. Moreover, there exists a unique minimizer r_{\rm opt} for the MFPT. Figure 4: Critical, convergence-inducing initial conditions without stochastic resetting and with fixed resetting rates of (a) r=1 , (b) r=10 , and (c) r=100 . The light curve corresponds to the scenario without stochastic resetting, determined by Eq. ( 12 ), and the dark curve corresponds to the scenario with stochastic resetting, determined by Eq. ( 20 ). The green-shaded area represents the resetting-induced spatial configurations that ensure convergence, compared to the case without resetting, while the red-shaded area represents the lost spatial configurations that ensure convergence when stochastic resetting is introduced. The dotted line corresponds to the critical starting position in the half-line, x_{r}^{\text{hl}} , shown in Eq. ( 22 ). Panels (d-f) show the threshold quantities L_{r}^{*} , L^{*} , and L_{\text{eq}} corresponding to the panel directly above. In every case, we fix D=1 , \tau_{\mathrm{cap}}=0 , \mu=1 , and c=1 . III Critical regions for a fixed resetting rate We begin our analysis by fixing a resetting rate r>0 and deriving convergence conditions for the G/M/c queue associated with the target at the origin. Hereafter, we fix the units of time and length by setting the consumption rate \mu=1 and diffusivity D=1 . As we have an explicit expression for the MFPT with stochastic resetting given by Eq. ( 16 ), the analysis can be done following the procedure in Ref. Giral-Barajas and Bressloff 2025 regardless of whether the stochastic resetting speeds up the search process or slows it down. The inter-arrival times have the same distribution as the sum of the FPT, denoted \mathcal{T}_{r} for the process with stochastic resetting, and the refractory period. This implies that the inter-arrival time density of the burst events, denoted as \mathcal{F}_{r} for the process with stochastic resetting, satisfies \widetilde{\mathcal{F}}_{r}(s)=\widetilde{f}_{r}(s)\widetilde{\varphi}(s) and the mean inter-arrival time is given by T_{r}(x_{0})+\tau_{\mathrm{cap}} . We now use the explicit expression for the MFPT in Eq. ( 16 ) to compute the arrival rate as \lambda_{r}=\frac{r\cosh{\left[\sqrt{\frac{r}{D}}(L-x_{0})\right]}}{\cosh\left[\sqrt{\frac{r}{D}}L\right]+(r\tau_{\mathrm{cap}}-1)\cosh{\left[\sqrt{\frac{r}{D}}(L-x_{0})\right]}}\;. (19) Substituting this expression into the convergence condition in Eq. ( 11 ) and solving the inequality for the initial position, x_{0} , we obtain the following critical starting position x_{r}^{*}=L-\sqrt{\frac{D}{r}}\arccosh\left[{\frac{c\mu\cosh{\left[\sqrt{\frac{r}{D}}L\right]}}{r+c\mu-rc\mu\tau_{\mathrm{cap}}}}\right]\;. (20) Therefore, for a fixed resetting rate r>0 , whenever the search process starts further than x_{r}^{*} , i.e. x_{0}>x_{r}^{*} , the traffic intensity at the G/M/c queue is lower than one, and the number of resources in the system converges to a steady state. However, not all interval lengths allow for convergence. For each fixed number of servers, c>0 , there are values of L for which x_{r}^{*}>L and the number of resources in the system blows up regardless of the rest of the parameters of the search process. To find the minimal convergence-allowing interval length, denoted by L_{r}^{*} , we equate x_{r}^{*} to L in Eq. ( 20 ) and solve the resulting equation for L . We obtain that L_{r}^{*}=\sqrt{\frac{D}{r}}\arccosh\left[\frac{r+c\mu-rc\mu\tau_{\mathrm{cap}}}{c\mu}\right]\;. (21) Consequently, for each fixed number of servers and resetting rate, L>L_{r}^{*} and x_{0}>x_{r}^{*} ensure that the number of resources in the system converges to a steady state. This condition splits the parameter space for the spatial configurations of the search process into two regions, see Fig. 4 (a)-(c). It can be shown that \lim_{r\to 0^{+}}L_{r}^{*}=L^{*} and that L_{r}^{*} is a monotonically decreasing function of r . Therefore, for each r>0 we have that L_{r}^{*}0 , there exists an interval length such that the critical starting position with resetting is the same as the one without resetting. Denoting this interval length by L_{\text{eq}} , and seeing x_{r}^{*} and x_{0}^{*} as functions of L , this is x_{r}^{*}(L_{\text{eq}})=x_{0}^{*}(L_{\text{eq}}) . In principle, this interval length can be found by equating Eq. ( 12 ) to Eq. ( 20 ) and solving for L . However, the resulting expression has no analytical solution, and L_{\text{eq}} is determined by the following implicit expression (r+c\mu+rc\mu\tau_{\mathrm{cap}})\cosh\left[\sqrt{\frac{rL_{\text{eq}}^{2}}{D}-\frac{2r}{c\mu}+2r\tau_{\mathrm{cap}}}\right]=c\mu\cosh\left[\sqrt{\frac{r}{D}}L_{\text{eq}}\right]\;. (24) This value marks a transition in the effects of stochastic resetting within the regions of convergence for the G/M/c queue. For L\in[L_{r}^{*},L_{\text{eq}}) , the presence of stochastic resetting widens the convergence zone. It introduces new possible spatial configurations for the search process that allow the number of resources in the queueing system to converge, see green-shaded areas in Fig. 4 (a)-(c). In contrast, for L\in(L_{\text{eq}},\infty) the presence of stochastic resetting shrinks the convergence zone and reduces the spatial configurations for the search process that allow convergence of the number of resources in the queueing system, see red-shaded areas in Fig. 4 (a)-(c). Observing Fig. 4 (a)-(c), we also realize that as the resetting rate increases the convergence stated in Eq. ( 22 ) seems to happen faster; with x_{r}^{*} being almost indistinguishable from x_{r}^{\text{hl}} for small values of L . If we assume that x_{r}^{*}=x_{r}^{\text{hl}} , we can find an explicit expression for L_{\text{eq}} by equating Eq. ( 12 ) to Eq. ( 22 ) and solving for L , obtaining L_{\text{eq}}=\sqrt{\frac{D}{r}}\frac{2r+2rc\mu\tau_{\mathrm{cap}}+c\mu\log\left(\frac{r+c\mu-rc\mu\tau_{\mathrm{cap}}}{c\mu}\right)^{2}}{2c\mu\log\left(\frac{r+c\mu-rc\mu\tau_{\mathrm{cap}}}{c\mu}\right)}\;. (25) To determine the validity of this explicit expression, we explore the rate of convergence of x_{r}^{*} to x_{r}^{\text{hl}} , as L\to\infty , for different values of the resetting rate. Let r>0 , and define d_{r}(L):=x_{r}^{*}(L)-x_{r}^{\text{hl}} . Numerical computations of the limit of d_{r}(L)e^{2\sqrt{\frac{r}{D}}L} as L\to\infty show that, as long as \tau_{\mathrm{cap}}<(c\mu)^{-1}+r^{-1} , d_{r}(L)\stackrel{{\scriptstyle L}}{{\sim}}\sqrt{\frac{D}{r}}\frac{r(c\mu\tau_{\mathrm{cap}}-1)[r(c\mu\tau_{\mathrm{cap}}-1)-2c\mu]}{(c\mu)^{2}}e^{-2\sqrt{\frac{r}{D}}L}\;, (26) where f\stackrel{{\scriptstyle L}}{{\sim}}g denotes that f(L)/g(L)\to 1 as L\to\infty . In particular, in the scenario of instantaneous refractory periods, i.e., \tau_{\mathrm{cap}}=0 , for all r>0 we have that d_{r}(L)\stackrel{{\scriptstyle L}}{{\sim}}\sqrt{\frac{D}{r}}\frac{r(r+2c\mu)}{(c\mu)^{2}}e^{-2\sqrt{\frac{r}{D}}L}\;. (27) These results are yet to be analytically shown; however, they show a fast decay in the error, coinciding with the behavior observed in Fig. 4 (a)-(c). Moreover, they establish the accuracy of the explicit expression for L_{\text{eq}} in Eq. ( 25 ) for finite, small values of r and L , and describe its error. IV Critical subregions for a fixed interval length We now shift the focus to the effects of varying the resetting rate while holding the interval length fixed. In this setting, we have two crossover quantities for the initial position of the search process. First, we have the threshold initial condition x_{0}^{*} in the absence of resetting, for which if x_{0}>x_{0}^{*} then the traffic intensity in the G/M/c queue is lower than one—allowing the number of resources in the system to converge to a steady state. We also have the subregion \mathcal{X}_{0}=(0,(1-1/\sqrt{5})L) , derived in Subsection II.3 following Ref. Pal and Prasad 2019a , such that if x_{0}\in\mathcal{X}_{0} then stochastic resetting can expedite the search process, thus reducing the MFPT and increasing the traffic intensity in the G/M/c queue. There are two possible scenarios involving these two crossover initial positions. In the first scenario, when x_{0}^{*}>(1-1/\sqrt{5})L , the subregion \mathcal{X}_{0} is a subset of the initial positions of the search process that make the number of resources in the G/M/c queue blow up. Hence, if the initial position of the search process is such that (1-1/\sqrt{5})L(1-1/\sqrt{5})L , the zone of interest for the initial position of the search process is ((1-1/\sqrt{5})L,x_{0}^{*}) . (b) When x_{0}^{*}<(1-1/\sqrt{5})L , the zone of interest for the initial position of the search process is (x_{0}^{*},(1-1/\sqrt{5})L) . The first scenario is less interesting, since it is always true that, with a sufficiently high resetting rate, one can shift the long-term dynamics of the queue from blow up to convergence. This is given by the fact that \lim_{r\to\infty}T_{r}(x_{0})=\infty , and one can make the traffic intensity as small as required by incrementing the resetting rate. However, in the second scenario, it is not immediately clear when stochastic resetting can cause the number of resources in the queue to blow up. This issue is the focus of the remainder of Section IV . We begin by determining the conditions ensuring that x_{0}^{*}<(1-1/\sqrt{5})L . To do so, we substitute the expression for x_{0}^{*} given in Eq. ( 12 ) into the inequality and solve for L . We obtain that x_{0}^{*}<(1-1/\sqrt{5})L if and only if L>L_{\text{res}}:=\sqrt{\frac{5D}{2}\left(\frac{1}{c\mu}-\tau_{\mathrm{cap}}\right)}\;. (28) Note that this condition is only well-defined for \tau_{\mathrm{cap}}\leq(c\mu)^{-1} , and whenever \tau_{\mathrm{cap}}>(c\mu)^{-1} we have that x_{0}^{*}=0 for all L>0 . This is since the condition for convergence to steady state in terms of the traffic intensity in Eq. ( 11 ) can be rewritten as \frac{1}{c\mu}(c\mu)^{-1} the condition for convergence is automatically fulfilled regardless of the spatial configuration of the search process. Hereafter, we will assume that \tau_{\mathrm{cap}}\leq(c\mu)^{-1} and L>L_{\text{res}}\geq 0 . If the initial position of the search process lies in the range x_{0}^{*}0 , as long as x_{0}>x_{r}^{*} , the number of resources in the system will still converge to a steady-state distribution. However, non-monotonicity of the MFPT with respect to r implies that varying r can shift x_{r}^{*} to the right of x_{0}^{*} (and thus possibly x_{0} ), resulting in blow up. This is illustrated in Fig. 7 for different numbers of servers c . It can be seen that in each case there exists a unique resetting rate r=r_{\max}(c) that maximizes the critical, convergence-inducing starting position x_{r}^{*} and thus minimizes the convergence zone. Note that r_{\max}(c) can be found by setting \frac{\partial}{\partial r}x_{r}^{*}=0 and numerically solving the resulting equation for r . The latter is given in Appendix B . In Fig. 7 , we indicate the numerical solution for different numbers of servers as red dots overlayed in the critical curves x_{r}^{*} . Figure 7: Critical, convergence-inducing starting position with and without resetting for different numbers of servers in the G/M/c queueing system. Plots of x_{0}^{*} and x_{r}^{*} for 1 server in (a), 5 servers in (b), and 25 servers in (c). The red-shaded area represents the resetting-induced shrinkage of the convergence zone in the (r,x_{0}) plane, and the green-shaded area represents the resetting-induced expansion of the convergence zone in the (r,x_{0}) plane. The red dots represent the maximum x_{r}^{*} at r_{\max} and the green triangles represent the resetting rate, r_{\text{eq}} , for which x_{r}^{*}=x_{0}^{*} . The rest of the parameters are D=1 , L=2 , \tau_{\mathrm{cap}}=0 , and \mu=1 . Fig. 7 also establishes that, for each fixed number of servers, there is a crossover point r_{\text{eq}}(c) at which x_{0}^{*}=x_{r}^{*} . As with L_{\text{eq}} , the resetting rate r_{\text{eq}} is obtained by numerically solving the implicit Eq. ( 24 ). Example values are indicated in Fig. 7 as green triangles overlaid on the critical curves x_{r}^{*} . The critical resetting rate r_{\text{eq}} marks a transition in the effects of stochastic resetting within the regions of convergence for the G/M/c queue. For r\in(0,r_{\text{eq}}) , the presence of stochastic resetting shrinks the convergence zone and reduces the spatial configurations for the search process that allow convergence of the number of resources in the queueing system. This shrinkage is maximized at r_{\text{max}}\in(0,r_{\text{eq}}) , producing the smallest convergence zone for the queueing system. In contrast, for r\in(r_{\text{eq}},\infty) , the presence of stochastic resetting widens the convergence zone. It introduces new possible spatial configurations for the search process that allow the number of resources in the queueing system to converge. Ultimately, as \lim_{r\to\infty}x_{r}^{*}=0 , the blow-up zone can be reduced as much as needed for a big enough r>r_{\text{eq}} . Figure 8: Maximizing and equalizing resetting rates for x_{r}^{*} as a function of the number of servers. (a) corresponds to the values of r_{\text{eq}}(c) , displayed as green triangles, and (b) corresponds to the values of r_{\text{max}}(c) , displayed as red dots. The rest of the parameters are D=1 , \mu=1 , L=2 , and \tau_{\mathrm{cap}}=0 . To conclude this section, we explore the behavior of r_{\max} and r_{\text{eq}} for different numbers of servers. In Fig. 8 , we show the values of r_{\max} and r_{\text{eq}} as the number of servers increases. It can be seen that the minimum resetting rate needed to improve the region of convergence, r_{\text{eq}} , scales as a power law; that is, r_{\text{eq}}\sim\alpha c^{\beta} , where \alpha>0 and \beta>2 . On the other hand, the resetting rate minimizing the zone of convergence scales linearly; that is, r_{\max}\sim\gamma c with \gamma\approx 3.9293 . Therefore, as the number of servers increases, the resetting rate needed for stochastic resetting to improve the long-term behavior of the number of resources in the G/M/c queue grows exponentially. In contrast, the resetting rate grows linearly, worsening convergence the most. This implies that, most of the time, the inclusion of stochastic resetting will be detrimental for the convergence zones of the G/M/c queue. V Discussion In this paper, we have developed a theoretical framework that combines results from multiple search-and-capture events with resetting in the interval, along with those from queueing theory, to study the convergence of the number of resources consumed by a target. One of our main findings is an explicit expression for a critical, convergence-inducing starting position, x_{r}^{*} , in terms of the remaining model parameters. We used this expression to explore the effects of stochastic resetting on the convergence of a G/M/c queueing system in two settings: in the first, we fix the resetting rate and vary the interval length, and in the second, we fix the interval length and vary the resetting rate. In both cases, we found a transition in the effects of resetting, between widening and shrinking the convergence regions, marked by the threshold parameters L_{\text{eq}} and r_{\text{eq}} . Moreover, we derived an implicit expression that enables us to numerically determine these threshold parameters. We were also able to determine the convergence rate of the critical, convergence-inducing starting position in the interval, x_{r}^{*} , to the one in the half line, x_{r}^{\text{hl}} , and exploit the fast convergence to derive an explicit expression for L_{\text{eq}} . Finally, we characterize the behavior of r_{\text{eq}} as the number of servers increases and conclude that, as the number of servers increases, it becomes harder for stochastic resetting to expand the convergence regions in the parameter space. There are several future directions for the exploration of queueing systems emerging from search processes with stochastic resetting. First, we could extend the model to a broader range of examples, including general non-Markovian service times (i.e., G/G/c queueing systems), general resetting distributions, and non-Markovian search processes. It would also be of interest to establish analytical results for the asymptotic behavior of x_{r}^{*} as L\to\infty and extend the analysis to when r\to\infty . Another future direction is to consider the effects of stochastic resetting in the regions of convergence of several targets receiving resources from the same search process. Several authors have studied the impact of stochastic resetting for search processes with various targets Pal and Reuveni 2017 ; Belan 2018 ; Bressloff 2020b , and the convergence regions for a pair of targets receiving resources from the same search process were studied in Ref. Giral-Barajas and Bressloff 2025 ; however, the combination of these two effects remains unexplored. Considering more than two targets underscores the need to understand the impact of resetting on the convergence of the number of resources in a 2D or 3D domain with a higher-dimensional search process. It would also be interesting to study the steady-state distribution of the number of resources under heavy traffic, when the starting position approximates the critical value x_{r}^{*} from the inside of the convergence zone and \rho\uparrow 1 . Finally, note that within the context of queueing theory, we explore the effects of stochastic resetting on the inter-arrival time distribution by identifying the latter with the FPT statistics of a search process with resetting. An alternative perspective is to incorporate resetting into the queue length Roy et al. 2024 and service times Bonomo et al. 2022 ; Bonomo et al. 2025 . These modifications allow for new nontrivial dynamics in the queue length. Acknowledgements. José Giral-Barajas was supported by a Roth PhD scholarship funded by the Department of Mathematics at Imperial College London. Appendix A Starting position for the expediting of the search process with resetting Figure 9: Roots for the polynomial \Phi(x_{0}) and subregion of [0,L] for the initial positions of the search process ensuring a non-monotonic MFPT as a function of the resetting rate, r , and the possible expediting of the process. From Eqs. ( 3 ) and ( 6 ) we have that \widetilde{f}_{0}(x_{0},t)=\frac{\cosh\left[\sqrt{\frac{s}{D}}(L-x_{0})\right]}{\cosh{\left[\sqrt{\frac{s}{D}}L\right]}}\;, (30) and we can obtain the n th FPT moment directly from the Laplace transform of the FPT density T_{0}^{(n)}(x_{0}):=\mathbb{E}[\mathcal{T}_{0}(x_{0})^{n}]=-\frac{\partial^{n}}{\partial s^{n}}\widetilde{f}_{0}(x_{0},s)\Big|_{s=0}\;. (31) Differentiating and taking the limit s\to 0 , we obtain \displaystyle T_{0}(x_{0}) \displaystyle= \displaystyle\frac{(2L-x_{0})x_{0}}{2D}\;, (32a) \displaystyle T_{0}^{(2)}(x_{0}) \displaystyle= \displaystyle\frac{x_{0}^{4}-4x_{0}^{3}L+8x_{0}L^{3}}{12D^{2}}\;. (32b) Now, given that \sigma_{0}^{2}(x_{0})=T_{0}^{(2)}(x_{0})-T_{0}(x_{0})^{2} , we can rewrite Eq. ( 17 ) as \Phi(x_{0}):=T_{0}^{(2)}(x_{0})-2T_{0}(x_{0})^{2}>0\;. (33) Substituting Eqs. ( 32a ) and ( 32b ) into this condition and simplifying the resulting expression, we obtain that \Phi(x_{0})>0 if and only if \frac{-5x_{0}^{4}+20Lx_{0}^{3}-24L^{2}x_{0}^{2}+8L^{3}x_{0}}{12D^{2}}>0\;. (34) Solving the left-hand side of this inequality for x_{0} we obtain four roots \displaystyle x_{1}^{*} \displaystyle= \displaystyle 0\;, (35a) \displaystyle x_{2}^{*} \displaystyle= \displaystyle\left(1-\frac{1}{\sqrt{5}}\right)L\;, (35b) \displaystyle x_{3}^{*} \displaystyle= \displaystyle\left(1+\frac{1}{\sqrt{5}}\right)L\;, (35c) \displaystyle x_{4}^{*} \displaystyle= \displaystyle 2L\;. (35d) With these roots, we are able to determine that \Phi(x_{0})>0 if and only if x_{0}\in(0,[1-1/\sqrt{5}]L) or x_{0}\in((1+1/\sqrt{5})L,2L) , see Fig. 9 (a). However, the only physically realistic domain for the initial position of the search process is ((1+1/\sqrt{5})L,2L) , as shown in Fig. 9 (b). Therefore, we finally obtain that the subregion of [0,L] for which an initial position allows stochastic resetting to expedite the search process is \mathcal{X}_{0}=\left(0,\left[1-\frac{1}{\sqrt{5}}\right]\cdot L\right)\;. (36) Appendix B Partial derivative of the critical starting position with resetting For the sake of completeness, we include the resulting expression for the partial derivative with respect to the resetting rate of the critical, convergence-inducing starting position with resetting: \frac{\partial}{\partial r}x_{r}^{*}=\sqrt{\frac{D}{4r^{3}}}\left(\arccosh\left[\frac{c\mu\cosh\left(L\sqrt{\frac{r}{D}}\right)}{c\mu-c\mu r\tau+r}\right]-\frac{c\mu r\left(\frac{L(c\mu-c\mu r\tau+r)\sinh\left(\frac{L\sqrt{r}}{\sqrt{D}}\right)}{\sqrt{D}\sqrt{r}}+2(c\mu\tau-1)\cosh\left[L\sqrt{\frac{r}{D}}\right)\right]}{(c\mu-c\mu r\tau+r)^{2}\sqrt{\frac{c\mu\cosh\left[L\sqrt{\frac{r}{D}}\right]}{c\mu-c\mu r\tau+r}-1}\sqrt{\frac{c\mu\cosh\left[L\sqrt{\frac{r}{D}}\right]}{c\mu-c\mu r\tau+r}+1}}\right)\;. (37)