Requirements for Teleportation in an Intercity Quantum Network Soubhadra Maiti, Guus Avis, Sounak Kar, Stephanie Wehner Abstract We investigate the hardware requirements for quantum teleportation in an intercity-scale network topology consisting of two metropolitan-scale networks connected via a long-distance backbone link. Specifically, we identify the minimal improvements required beyond the state-of-the-art to achieve an end-to-end expected teleportation fidelity of 2 / 3 2/3 , which represents the classical limit. To this end, we formulate the hardware requirements computation as optimisation problems, where the hardware parameters representing the underlying device capabilities serve as decision variables. Assuming a simplified noise model, we derive closed-form analytical expressions for the teleportation fidelity and rate when the network is realised using heterogeneous quantum hardware, including a quantum repeater chain with a memory cut-off. Our derivations are based on events defined by the order statistics of link generation durations in both the metropolitan networks and the backbone, and the resulting expressions are validated through simulations on the NetSquid platform. The analytical expressions facilitate efficient exploration of the optimisation parameter space without resorting to computationally intensive simulations. We then apply this framework to a representative realisation in which the metropolitan nodes are based on trapped-ion processors and the backbone is composed of ensemble-based quantum memories. Our results suggest that teleportation across metropolitan distances is already achievable with state-of-the-art hardware when the data qubit is prepared after end-to-end entanglement has already been established, whereas extending teleportation to intercity scales requires additional, though plausibly achievable, improvements in hardware performance. 1 Introduction Quantum networks are anticipated to facilitate tasks beyond the reach of the classical internet [ 92 ] . In such networks, remote entanglement serves as the primary resource for performing a wide range of applications, including quantum key distribution [ 30 , 9 ] , enhanced sensing [ 34 ] , secure remote computation [ 1 , 16 ] , clock synchronisation [ 47 ] , and many other applications. Furthermore, entanglement shared across spatially separated locations enables foundational tests of quantum mechanics, most notably Bell inequality violation [ 7 ] , as well as recent proposals for probing quantum gravity effects [ 13 ] , among others. A remote entangled link consists of a pair of entangled qubits shared between end nodes, i.e., quantum devices directly accessible to users. The quality of service for any such application depends on the quality of these links, typically represented by the entanglement fidelity, and the rate at which they are generated. Furthermore, the required thresholds for these performance metrics vary depending on the underlying application, motivating a careful analysis of these metrics in realistic network architectures. Figure 1 : Schematic of an intercity quantum network architecture comprising four different components. User-controlled end nodes are denoted by circles \text{P}_{1} – \text{P}_{4} and metropolitan hubs by squares \text{H}_{1} – \text{H}_{2} . The border nodes, shown as diamonds \text{B}_{1} – \text{B}_{2} , form the backbone together with the zig-zag line, which can be realised using either a space-based quantum communication channel or a terrestrial linear quantum repeater chain, with individual repeater nodes depicted as triangles. Each end node is connected to its nearest hub 25\, km away and forms a metropolitan network (MN 1 or 2 ). The 450\, km backbone connects the metropolitan regions via the border nodes at both ends. Together, the MNs and the backbone form the full IN, enabling long-distance quantum communication between multiple end nodes. Photon transmission through optical fibre decays exponentially with propagation distance due to attenuation losses, which limits the feasibility of entanglement generation over long distances via direct photon transmission. Moreover, the no-cloning theorem [ 94 ] forbids the creation of identical copies of an unknown quantum state, making classical amplification techniques infeasible for quantum states. To overcome this, quantum repeaters [ 15 ] introduce intermediate nodes that enable entanglement distribution over extended distances. Entanglement generation has been experimentally demonstrated across various physical platforms, including trapped ions [ 61 , 84 , 53 , 54 , 51 , 52 , 80 ] , colour centres in solids [ 12 , 44 ] , rare-earth ions [ 55 , 58 , 75 ] , and atomic ensemble memories [ 21 , 99 , 98 ] , where matter-photon entanglement is used to generate entanglement between distant matter qubits located at remote nodes. These platforms exhibit distinct advantages and limitations, and future large-scale quantum networks are therefore envisioned to adopt a heterogeneous architecture that integrates multiple hardware platforms [ 87 , 88 , 85 ] . One of the central challenges in realising a scalable quantum network lies in identifying the precise hardware requirements to support efficient quantum communication. Experimentally, Pompili et al. [ 67 ] demonstrated a lab-scale three-node quantum network based on nitrogen-vacancy centres in diamond, while Krutyanskiy et al. [ 51 ] presented a quantum repeater node based on trapped ions capable of distributing entanglement over distances up to 50\,\text{km} , marking significant experimental milestones. On the theoretical side, the performance of single-repeater setups and homogeneous repeater chains has been studied extensively, both analytically [ 14 , 50 , 38 , 35 , 26 , 56 , 72 ] and via simulation [ 31 , 3 ] . However, to the best of our knowledge, performance analyses of heterogeneous repeater chains have so far relied predominantly on simulation-based approaches [ 3 ] . In the context of quantum networks, quantum teleportation serves both as a fundamental primitive and as a high-level performance benchmark. Applications such as blind quantum computing impose stringent requirements on teleportation fidelity and rate to ensure correctness and security [ 19 ] . Beyond its direct use for communication, teleportation constitutes a key resource for implementing non-local gates, thereby enabling the preparation of multipartite entangled states and distributed quantum information processing [ 36 ] . At the network level, the achievable end-to-end teleportation fidelity provides a quantitative measure of overall network performance [ 63 ] . Moreover, attaining a teleportation fidelity exceeding the classical limit of 2/3 constitutes a clear demonstration of quantum advantage [ 43 ] , analogous to Bell-inequality tests [ 39 ] . In this work, we investigate requirements for quantum teleportation in an intercity-scale network (IN) shown in Fig. 1 , consisting of two metropolitan-scale networks (MNs) and a long-distance backbone realised as a quantum repeater chain. A detailed description of the network model is provided in Sec. 3 . We adopt standard assumptions, including heralded entanglement generation (HEG), depolarising noise in memory, instantaneous local operations, swap-as-soon-as-possible (swap-ASAP) policy [ 49 ] , and a cut-off strategy together with the standard deterministic teleportation protocol in which teleportation succeeds with unit probability [ 8 ] ; see A1 – A9 for details. Specifically, we study the requirement for attaining a teleportation fidelity of 2/3 across metropolitan and intercity-scale distances and carry out our analysis in a hardware-agnostic manner, i.e., we characterise the network using a set of parameters capturing the essential hardware properties. We also evaluate these requirements for a heterogeneous platform comprising trapped-ion processors in MNs and an ensemble-based repeater chain in the backbone, thereby illustrating their relevance to realistic quantum network implementations. For studying the requirements, we focus on two teleportation scenarios that capture different operational regimes: • Entanglement-ready (ER) : in ER teleportation, the data qubit (qubit to be teleported) is prepared only after end-to-end entanglement has been established. This approach allows the system to avoid the decoherence accumulated during the probabilistic entanglement generation process, thereby significantly improving teleportation fidelity [ 66 ] . • Qubit-ready (QR) : here, the data qubit is prepared in advance and stored in quantum memory until end-to-end entanglement is established. This scenario naturally arises when the data qubit preparation rate and entanglement generation rate are mismatched [ 18 ] , a condition anticipated in large-scale network architectures. The resulting memory storage leads to additional decoherence. Although we assume instantaneous location operation and qubit preparation (see A9 ), we include the QR scenario for completeness, as it represents an extreme yet practically relevant operating regime where the entanglement generation begins only after the data qubit is ready. In order to determine the hardware requirements, we formulate the task as an optimisation problem, in which the relevant cost function is designed along the lines of [ 3 ] . To solve the resulting formulation, we first derive closed-form analytical expressions for the expected fidelities and generation rates of both the end-to-end entangled link and teleported qubit. We then validate the accuracy of the expressions by comparing them with empirical estimates from NetSquid-based simulations [ 23 ] . The analytical expressions enable us to efficiently identify the hardware requirements without resorting to computationally expensive simulations [ 31 , 3 , 25 ] . Also, to quantify the requirements, we introduce two reference values for each network parameter: the baseline value corresponds to the state-of-the-art hardware capability, while the optimistic value represents capability anticipated in the near future based on ongoing experimental advances and theoretical predictions. We define the hardware requirements as the minimal improvements over the baseline parameters needed to achieve the target teleportation fidelity threshold of 2/3 . Although our framework itself is hardware-agnostic, we evaluate the requirements using a realistic network architecture comprising trapped-ion processors for the MN and a repeater chain based on ensemble-based memories as the backbone [ 87 , 88 ] , along with corresponding baseline and optimistic parameter sets. Summary of results: We specifically address the following questions with respect to hardware requirements: Q1 Do the baseline parameters enable quantum teleportation in an MN with a fidelity exceeding the classical limit of 2/3 ? If not, what are the minimal parameter improvements required to reach this threshold? - We find that current trapped-ion technology (baseline) already supports ER teleportation at metropolitan scales, whereas QR teleportation requires further improvements and becomes feasible with near-term experimental advances; see Sec. 6.1 for details. Q2 Assuming that the backbone attains optimistic performance levels, what minimal improvements to the MN parameters are required to achieve quantum teleportation with an expected fidelity \geq 2/3 across the IN? This analysis reveals the trade-offs among metropolitan parameters and provides a lower bound on the required improvements for metropolitan hardware. - We find that although ER teleportation across IN is possible, QR teleportation requires significant improvements beyond the baseline, which nonetheless remains within the reach of optimistic estimates. We also identify the feasible regions in parameter space and determine the optimal parameter configurations that minimise the hardware cost; see Sec. 6.2 for details. Q3 Conversely, assuming optimistic MN performance, what are the corresponding backbone requirements to enable teleportation with an expected fidelity \geq 2/3 in the IN? This highlights the trade-offs between backbone parameters and establishes a lower bound on their required improvements. - Similar to Q2 , we find that ER teleportation across IN is possible and QR teleportation requires significant improvements beyond the baseline but is still within the reach of optimistic estimates; see Sec. 6.2 for details. Q4 Given baseline parameters representative of current experimental capabilities for both the MN and backbone, what minimal joint improvements are needed to achieve an expected teleportation fidelity \geq 2/3 in the IN? - In this case, neither ER nor QR teleportation is possible, and we identify the minimal joint improvements required to attain the teleportation fidelity threshold; see Sec. 6.2 for details. Beyond their role in the optimisation procedure, the analytical expressions and the underlying methodology can also be used for evaluating performance metrics for heterogeneous networks and are therefore of independent interest. The rest of this paper is organised as follows. First, we review relevant literature in Sec. 2 , followed by a description of the network setup and assumptions in Sec. 3 . Sec. 4 formally presents the objectives and methodology. In Sec. 5 , we derive analytical expressions for the teleportation rate and expected fidelity for the IN. Evaluations addressing questions Q1 – Q4 are presented in Sec. 6 and the conclusions are drawn in Sec. 7 . 2 Related Work We begin by surveying prior studies that are closely related to our work. This review is not intended to be an extensive review of performance analyses of quantum repeater chains; instead, we focus on key contributions that are directly relevant to our setting. In this context, commonly considered performance metrics include the end-to-end entanglement generation time, end-to-end entanglement fidelity, and secret key rate [ 81 ] . Regarding the performance of a quantum repeater, Rozpędek et al. [ 72 ] identified realistic parameter regimes where a single sequential repeater outperforms direct transmission. Analytical models for entanglement generation in a homogeneous repeater chain under various swapping and decoherence assumptions have been developed in [ 11 , 14 , 50 , 38 , 49 , 35 , 26 ] , while Li et al. [ 56 ] optimised cutoff strategies to improve the resulting entanglement quality. Goodenough et al. [ 35 ] derived exact formulas and tight approximations for expected fidelity under a global cut-off policy and swap-asap policy, while Andrade et al. [ 26 ] provided closed-form expressions for expected end-to-end fidelity in homogeneous chains with sequential entanglement swapping. As an alternative strategy, Collins et al. [ 22 ] proposed multiplexed quantum repeater architectures that significantly reduce sensitivity to memory coherence times. However, these frameworks do not directly extend to inhomogeneous repeater chains where the distances between nodes are different. In our work, we analyse a four-node repeater chain comprising two memory-equipped repeaters, where the two outer links are identical while the central link differs, thereby enabling heterogeneous hardware implementations. We derive exact analytical expressions for expected end-to-end fidelity and generation rate of both entanglement and teleportation with a cutoff strategy, while fully accounting for communication delays to closely reflect real-world scenarios. Several experimental approaches to quantum repeaters are based on atomic ensemble memories and linear optics following the DLCZ protocol [ 29 ] . Notably, Simon et al. [ 82 ] extended this scheme by combining photon-pair sources with multimode quantum memories in rare-earth–doped solids, enabling faster and robust entanglement generation while retaining the simplicity of linear optics and single-photon detection. Jiang et al. [ 46 ] proposed an improved ensemble-based repeater that allows active purification, suppresses multi-excitation noise, and achieves polynomial scaling with realistic inefficiencies. Sangouard et al. [ 78 ] provided extensive surveys of such theoretical proposals and compared their entanglement generation rates against direct photon transmission. More recently, Wu et al. [ 95 ] incorporated time-dependent memory decay into the analysis and obtained analytical expressions for entanglement rate, showing feasibility with current technology while highlighting the importance of multiplexing. Implementations of quantum repeaters based on other hardware platforms involve trapped ions [ 77 , 51 , 101 ] , trapped neutral atoms [ 59 , 69 ] , rare-earth ions doped crystals [ 2 ] , and colour centres [ 20 , 73 ] . In particular, Sangouard et al. [ 77 ] demonstrated that trapped-ion–based repeaters employing deterministic entanglement swapping and temporal multiplexing can achieve substantially higher entanglement rates than ensemble-based schemes. Experimentally, Krutyanskiy et al. [ 51 ] demonstrated a trapped-ion quantum repeater node that generates and swaps entanglement over two 25\,\text{km} fibres, extending it to 50\,\text{km} ., and outlined near-term improvements to scale such nodes to a repeater chain of 800\,\text{km} . For this chain, however, they assume that the memory coherence time significantly exceeds the elementary link creation time between adjacent nodes, thereby ignoring memory decoherence. In this context, Zwerger et al. [ 101 ] proposed decoherence-free subspace encoding to mitigate collective dephasing. Lloyd et al. [ 59 ] proposed a cavity-based quantum network architecture in which long-distance entanglement is stored in trapped atoms, enabling unconditional teleportation via full Bell-state measurements. Razavi et al. [ 69 ] compared this scheme with the DLCZ protocol, noting that while DLCZ allows faster entanglement distribution, it supports only conditional teleportation, whereas the trapped-atom approach enables unconditional teleportation. Recent developments include hybrid architectures combining ensemble-based repeaters with single-atom or ion-based processors [ 87 , 88 , 85 ] , integration of repeaters with satellite-based links for global-scale entanglement distribution [ 57 ] , and all-photonic repeaters that operate without matter-based memories [ 4 ] . In contrast to these works, we derive the analytics in a platform-agnostic manner while adopting parameter values for evaluations from particular experimental implementations with trapped ions [ 53 , 54 , 51 , 52 ] and predictions from [ 87 , 88 ] for the backbone; see Sec. 4.3 for details. Finally, we review prior studies most relevant to our work that address the hardware specifications for efficient quantum communication. A critical challenge in realising quantum repeaters is that their hardware requirements remain largely unknown. Silva et al. [ 31 ] introduced a systematic approach using genetic algorithms and NetSquid simulations to optimise entanglement generation in repeater chains, identifying minimal hardware requirements under realistic conditions. In a related work, Avis et al. [ 3 ] analysed entanglement generation between two end nodes connected via a single repeater, determining the requirements for verifiable blind quantum computing (VBQC). Their analysis considers the restrictions imposed by real-world fibre grids and employs hardware-specific models of colour centres and trapped ions using NetSquid. Conversely, Silva et al. [ 25 ] extended this to a multi-repeater network spanning 900\,\text{km} , determining the specifications for repeaters enabling VBQC and quantum key distribution (QKD). Similarly, van Dam et al. [ 91 ] identified the requirements for a trapped-ion server and measurement-only client to perform VBQC across 50\,~\text{km} . While these works rely on simulations in NetSquid, we derive exact analytical expressions for teleportation rates and expected fidelities to carry out the analysis. In particular, we identify the minimal requirements in terms of the coherence time, elementary link generation probability, and link fidelity needed to surpass the classical fidelity threshold of 2/3 for teleportation in an MN over 50\,\text{km} and a IN over 500\,\text{km} 1 . 3 Setup and Assumptions In this section, we briefly introduce the quantum network setup from [ 6 ] and outline the assumptions underlying our analysis. We specify the relevant hardware parameters that characterise the network, enabling us to formally define Q1 – Q4 . In Fig. 1 , we provide a schematic of the network, which comprises four fundamental components: end nodes, metropolitan hubs, a backbone, and border nodes, each serving distinct functions to enable scalable quantum communication. Given that we analyse requirements for teleportation over metropolitan (up to 50\,\text{km} ) and intercity-scale (up to 500\,\text{km} ) distances, the network components must be equipped with capabilities beyond the minimal specifications described in [ 6 ] . We now briefly describe the functions of these components. The end nodes , labelled \text{P}_{1} – \text{P}_{4} in Fig. 1 , serve as primary access points for users, supporting quantum applications under user-defined control. These devices can generate photons entangled with matter qubits and possess quantum processing capabilities, such as measurement and gate operations on matter qubits. For deterministic teleportation, we require the end nodes to possess two quantum memories and execute classical operations, including classical protocols for coordination and computation. Recent experiments [ 84 , 53 , 67 , 24 , 89 , 74 ] have demonstrated promising platforms for such end nodes, achieving long coherence times and high quantum gate fidelities using colour centres, trapped ions, and neutral atoms. End nodes are connected to their respective metropolitan hubs , labelled \text{H}_{1} – \text{H}_{2} in Fig. 1 , which serve as central points for facilitating HEG between node pairs within an MN, spanning city-scale distances up to 50\,\text{km} . End nodes \text{P}_{1} and \text{P}_{2} together with hub \text{H}_{1} constitute MN 1 , while end nodes \text{P}_{3} and \text{P}_{4} with hub \text{H}_{2} constitute MN 2 . To generate and route entanglement between different pairs of nodes, these hubs may comprise entanglement generation switches [ 32 ] or entanglement distribution switches [ 40 ] . For our purpose of teleportation, we only require that the hubs contain beam splitters and photon detectors to perform Bell state measurements (BSMs) on incoming photons from two nodes. End nodes are assumed to be connected to their respective hub via standard telecommunication fibres supporting photonic qubit transmission. To overcome the distance limitations imposed by fibre loss in direct photon transmission, the architecture incorporates a long-range backbone , denoted by the zigzag line in Fig. 1 , together with border nodes \text{B}_{1} and \text{B}_{2} . These border nodes (referred to as junction nodes in [ 6 ] ) are located adjacent to the metropolitan hubs and serve as interfaces between the backbone and MNs. Each border node is assumed to contain at least two memories and to possess the same processing and storage capabilities as the end nodes, allowing it to store entanglement both with neighbouring end nodes and across the backbone. A key feature of this architecture is its ability to integrate heterogeneous quantum hardware platforms, thereby leveraging their distinct advantages, such as high-fidelity quantum gates, long memory coherence time, and multiplexing. The backbone itself may be realised using different technological platforms. One approach relies on space-based quantum communication [ 90 , 97 , 96 ] which offers low-loss photon transmission over long distances. Alternatively, a fibre-based implementation using a multiplexed quantum repeater chain [ 87 , 82 , 78 ] can be employed, offering a promising route to preserve quantum coherence while extending the range of entanglement distribution. We further define the IN as the composite architecture in which two distant MNs are connected via a backbone, enabling quantum communication between them. Throughout this paper, we use the terms entanglement and link interchangeably to denote an entangled quantum state shared between two nodes. Furthermore, we model entanglement generation in the IN as a single-shot process: once a border node performs an entanglement swap, it remains idle and does not initiate further generation until the ongoing end-to-end entanglement generation process is completed. We refer to a complete trial to establish an end-to-end link as a round , while individual trials for elementary link generation are termed as attempts . Under this framework, we analyse the performance of this architecture in a platform-agnostic manner, where the network is fully characterised by key hardware parameters. In particular, for an MN, the expected teleportation fidelity and corresponding rate are primarily determined by three parameters: the elementary link generation probability between end nodes p_{\text{m}^{\prime}} , the memory coherence time of the end nodes t_{\text{coh}} , and the fidelity of a freshly generated link f_{\text{m}^{\prime}} . Here, we assume a symmetric architecture where the two MNs are identical, end nodes are equidistant from the metropolitan hub, and border nodes have the same properties as end nodes. Thus, the performance of the IN is governed by five key hardware parameters: the entanglement-generation probability between an Definitions \lfloor x\rfloor \max\{n\in\mathbb{N}:n\leq x\} for x\in\mathbb{R} \lceil x\rceil \min\{n\in\mathbb{N}:n\geq x\} for x\in\mathbb{R} m^{*} t_{\text{b}}/\text{gcd}(t_{\text{m}},t_{\text{b}}) Parameters p_{\text{m}}^{0} base efficiency, i.e., the success probability of an entanglement generation attempt between two end nodes (or an end and border node) at zero separation d_{\text{m}^{\prime}} distance between an end node and a nearby metropolitan hub p_{\text{m}^{\prime}} success probability of an entanglement generation attempt between two end nodes in an MN, i.e., {p_{\text{m}^{\prime}}\!=\!p_{\text{m}}^{0}10^{-2\alpha d_{\text{m}^{\prime}}/10}} ; see ( 4 ) p_{\text{m}} success probability of an entanglement generation attempt between an end node and a neighbouring border node, i.e., {p_{\text{m}}\!=\!p_{\text{m}}^{0}10^{-\alpha d_{\text{m}^{\prime}}/10}} ; see ( 7 ) t_{\text{m}^{\prime}} duration of an entanglement generation attempt between two end nodes in an MN t_{\text{m}} duration of an entanglement generation attempt between an end node and a neighbouring border node t_{\text{prep}} (constant) average duration of a photon generation from an end node or border node f_{\text{m}^{\prime}} fidelity of a freshly generated entangled link between two end nodes in an MN, f_{\text{m}^{\prime}}=(1+3w_{\text{m}^{\prime}})/4 , where w_{\text{m}^{\prime}} is the corresponding Werner parameter f_{\text{m}} fidelity of a freshly generated entangled link between an end and a neighbouring border node, f_{\text{m}}=(1+3w_{\text{m}})/4 where w_{\text{m}} is the corresponding Werner parameter p_{\text{b}} success probability of an entanglement generation attempt in the backbone t_{\text{b}} (constant) duration of an entanglement generation attempt in the backbone f_{\text{b}} fidelity of a freshly generated entangled link in the backbone, equals (1+3w_{\text{b}})/4 where w_{\text{b}} is the corresponding Werner parameter t_{\text{coh}} memory coherence time of an end or border node t_{\text{cut}} cut-off time, i.e., the maximum allowable time between the earliest and latest generated entangled links t_{\text{msg}} communication time between an end node and the farthest border node Variables M_{1} number of attempts until successful entanglement generation between an end node in MN 1 and neighbouring border node, M_{1}\sim\text{Geo}(p_{\text{m}}) X_{1} time until successful entanglement generation between an end node in MN 1 and neighbouring border node, i.e., X_{1}=t_{\text{m}}M_{1} M_{2} number of attempts until successful entanglement generation between an end node in MN 2 and neighbouring border node, M_{2}\sim\text{Geo}(p_{\text{m}}) X_{2} time until successful entanglement generation between an end node in MN 2 and neighbouring border node, i.e., X_{2}=t_{\text{m}}M_{2} M_{\text{b}} number of attempts until successful entanglement generation in the backbone, M_{b}\sim\text{Geo}(p_{\text{b}}) X_{\text{b}} time until successful entanglement generation in the backbone, i.e., X_{\text{b}}=t_{\text{b}}M_{\text{b}} Table 1 : List of notations. end node and a border node p_{\text{m}} , the memory coherence time of nodes t_{\text{coh}} , the fidelity of a freshly generated link between an end and a border node f_{\text{m}} , entanglement-generation probability in the backbone p_{\text{b}} , and the fidelity of a freshly generated link in backbone f_{\text{b}} . The definitions of all parameters are summarised in Tab. 1 . Note that while we focus on this symmetric setting for clarity, the framework naturally extends to more general asymmetric networks with heterogeneous nodes and link distances, at the cost of introducing additional parameters. Throughout the analysis, we assume time is slotted and derive all performance metrics accordingly. We now state the assumptions necessary to model the processes that influence teleportation in the intercity network. This helps us derive the performance metrics, i.e., the expected fidelity of teleportation and corresponding rate. A1 Entangled state description : We model all entangled links in the MN and backbone as Werner states [ 93 ] : \rho=w\ket{\Phi^{+}}\bra{\Phi^{+}}+\left(1-w\right)\frac{\mathbb{I}_{4}}{4}~, (1) where {\ket{\Phi^{+}}\!=\!(\ket{00}\!+\!\ket{11})/\sqrt{2}} is a maximally entangled Bell state, w\in[0,1] is the corresponding Werner parameter, and \mathbb{I}_{4} is the 4\times 4 identity matrix. The fidelity of \rho with respect to \ket{\Phi^{+}} can be seen as {{(1+3w)}/{4}} . While physically realised remote entangled states are generally not of the Werner form [ 82 , 101 ] , we model link-level entanglements as Werner states due to the following reasons. First, when two Werner states are swapped, the resulting state is also a Werner state with the corresponding Werner parameter given by the product of those of the initial states [ 62 ] , making analysis easier. Further, any bipartite state can be transformed into a Werner state by twirling, i.e., by applying transformations uniformly at random from a set of operations that involve identical rotations on each qubit [ 10 ] . A2 Noise in memory : During entanglement generation across multiple links or in the presence of classical communication delays, the qubits stored in the memory undergo decoherence. We model this noise as a depolarising channel acting on the stored qubit. Specifically, the evolution of a quantum state {\rho}_{A} undergoing a depolarising channel \mathcal{E}_{t} over a storage time t in memory A is given by \mathcal{E}_{t}({\rho}_{A})=e^{-t/t_{\text{coh}}}{\rho}_{A}+\left(1-e^{-t/t_{\text{coh}}}\right)\frac{\mathbb{I}_{2}}{2}~, (2) where t_{\text{coh}} denotes the memory coherence time. For a Werner state {\rho}_{AB} which has maximally mixed marginals, when both qubits undergo depolarising noise for a duration t , the resulting state is given by \mathcal{E}_{t}\otimes\mathcal{E}_{t}({\rho}_{AB})=e^{-2t/t_{\text{coh}}}{\rho}_{AB}+\left(1-e^{-2t/t_{\text{coh}}}\right)\frac{\mathbb{I}_{4}}{4}~. (3) It is worth noting that in certain platforms, such as trapped-ion systems, memory noise can be described more accurately by a correlated dephasing process with a Gaussian temporal profile characterised by the coherence time [ 51 ] . In contrast, we model the memory noise as an exponential depolarising channel as defined in ( 2 ). The choice is primamily motivated by analytical tractability and platform independence. Specifically, depolarising noise preserves the Werner form of states ( 1 ), thereby simplifying the analysis [ 35 ] . Moreover, while the depolarising channel does not accurately capture the correlated and non-Markovian nature of Gaussian dephasing, it provides a convenient and broadly comparable benchmark that facilitates general conclusions across architectures. A more detailed investigation of how correlated Gaussian dephasing influences network performance would be valuable but lies beyond the scope of this work. A3 Entanglement generation between end nodes in a metropolitan network : We adopt the double-click HEG protocol [ 5 ] in our model. Specifically, to entangle two end nodes in an MN, e.g., \text{P}_{1} and \text{P}_{2} in MN 1 (Fig. 1 ), both nodes first generate matter-photon entanglement. Photons from both nodes then travel to the midpoint metropolitan hub, where a photonic BSM is performed. The BSM succeeds with a certain probability, and the result travels back to both end nodes, heralding the signal whether entanglement is successfully generated. We further assume that entanglement generation is attempted at fixed intervals defined as the cycle time. The cycle time and success probability depend on the fibre length between the nodes. We denote the distance between an end node and its nearest hub as d_{\text{m}^{\prime}} , such that the fibre length between two end nodes in an MN is given by 2d_{\text{m}^{\prime}} . The entanglement-generation probability is attenuated by fibre loss and is modelled as an exponential factor \eta(\cdot) [ 25 ] . Consequently, the entanglement-generation probability between two nodes is given by: \displaystyle p_{\text{m}^{\prime}}=p_{\text{m}}^{0}~\eta(2d_{\text{m}^{\prime}})=p_{\text{m}}^{0}10^{-2\alpha d_{\text{m}^{\prime}}/10}~, (4) where \alpha\!=\!0.2\,\text{km}^{-1} is the attenuation coefficient [ 77 ] for typical telecommunication optical fibres in the optical wavelength range around 1550\,\text{nm} and p_{\text{m}}^{0} , named base efficiency, captures all distance-independent factors, including photon source brightness, coupling losses, and visibility. To derive the cycle time, i.e., the time for each entanglement generation attempt between the end nodes, we observe that the photon propagation time from an end node to the hub and the heralding signal propagation time from the hub to the end node are each given by t_{\text{m}}^{\text{class}}\!=\!d_{\text{m}^{\prime}}/c , where c is the speed of light in fibre. To account for delays apart from the propagation times, we introduce t_{\text{prep}} as the average duration of all local (i.e., node-level) experimental overheads, including photon generation attempts. This can, for example, represent intrinsic delays between entanglement generation attempts in trapped-ion systems, which arise from necessary procedures such as laser excitation, qubit initialisation, cooling, optical pumping, and system control latencies [ 51 ] . Since the photon generation attempts at the end nodes are synchronised, the cycle time is given by \displaystyle t_{\text{m}^{\prime}}=t_{\text{prep}}+2t_{\text{m}}^{\text{class}}~. (5) Note that we express the terms t_{\text{m}^{\prime}} , t_{\text{prep}} , and t_{\text{m}}^{\text{class}} in units chosen such that their numerical values correspond to integers. Finally, in our discrete-time analysis, the number of cycles M^{\prime} to successfully establish a link is geometrically distributed: \displaystyle M^{\prime}\sim\text{Geo}({p}_{\text{m}^{\prime}})~, (6) whereas a freshly generated link is assumed to be in the Werner form ( 1 ) with fidelity f_{\text{m}^{\prime}} and corresponding Werner parameter w_{\text{m}^{\prime}} such that f_{\text{m'}}\!=\!(1\!+\!3w_{\text{m}^{\prime}})/4 is the fidelity. Note that imperfections such as reduced two-photon interference visibility, detector inefficiencies, or dark counts contribute to noise and consequently lower the fidelity. We do not model these effects explicitly and instead incorporate them into the effective fidelity f_{\text{m'}} . This approach similarly applies to the assumptions outlined in A4 – A5 . A4 Entanglement generation between an end node and a neighbouring border node : Similar to A3 , we adopt a discrete-time model for entanglement generation, now between an end node and a neighbouring border node, e.g., between \text{P}_{1} and \text{B}_{1} . Since \text{B}_{1} is located right next to the hub \text{H}_{1} , only the photon from \text{P}_{1} traverses the distance d_{\text{m}^{\prime}} to \text{H}_{1} , while the photon from \text{B}_{1} has negligible travel time. Since the border nodes are assumed to have the same properties as the end nodes, the entanglement-generation probability between an end node and a border node can be obtained as \displaystyle p_{\text{m}}=p_{\text{m}}^{0}\eta(d_{\text{m}^{\prime}})=p_{\text{m}}^{0}10^{-\alpha d_{\text{m}^{\prime}}/10}~. (7) Furthermore, the photon travel time from an end node to the hub and the heralded signal propagation time from the hub to the end node are each given by t_{\text{m}}^{\text{class}}\!=\!d_{\text{m}^{\prime}}/c . In comparison to this, the duration for both the photon from the border node to the hub and the return heralding signal from the hub to the border node is negligible. For properly synchronised entanglement generation attempts, considering that the average duration of all local experimental overheads is as in A3 , the cycle time is given by \displaystyle t_{\text{m}}=t_{\text{prep}}+2t_{\text{m}}^{\text{class}}~. (8) Note that the quantities t_{\text{m}} , t_{\text{prep}} , and t_{\text{m}}^{\text{class}} are expressed in units chosen such that their numerical values are integers. Finally, in an entanglement generation attempt, the number of trials M_{i} required to establish an entangled link i follows a geometric distribution: \displaystyle M_{i}\sim\text{Geo}({p}_{\text{m}})~,\quad i\in\{1,2\}~. (9) Once an attempt succeeds, we assume that the generated link is of the Werner form ( 1 ) with fidelity f_{\text{m}} and corresponding Werner parameter w_{\text{m}} such that f_{\text{m}}\!=\!(1\!+\!3w_{\text{m}})/4 . A5 Entanglement generation in the backbone : We model entanglement generation in the backbone as a monolithic process, where each attempt takes a fixed duration t_{\text{b}} and succeeds with probability p_{\text{b}} . This abstraction captures the behaviour of quantum systems that can store spin qubits in memory, such as trapped ions, colour centres, as well as systems capable of storing photonic qubits in memory for a finite time window, such as atomic ensemble-based memories. Thus, the number of attempts M_{b} required for successful entanglement generation in the backbone and the corresponding generation time X_{b} are given by \displaystyle M_{\text{b}}\sim\text{Geo}(p_{\text{b}})~,\quad X_{\text{b}}:=t_{\text{b}}M_{\text{b}}~, (10) and the resulting entanglement generation rate is \displaystyle R_{\text{b}}=1/\mathbb{E}(X_{\text{b}})=p_{\text{b}}/t_{\text{b}}~. (11) Since we consider that the border nodes share the same properties as the end nodes, we again assign t_{\text{prep}} as the average duration of a single photon generation attempt at a border node, including local experimental delays (see A3 ). Thus, we define the cycle time t_{\text{b}} as the sum of the time it takes to create a single photon from the border node, i.e., t_{\text{prep}} , added with the one-way classical communication time between the two border nodes across the backbone t_{\text{b}}^{\text{class}} , i.e., t_{\text{b}}=t_{\text{prep}}+t_{\text{b}}^{\text{class}}~. (12) For evaluation, we use an estimate of the entanglement generation rate in the backbone from a model of trapped-ion nodes connected via repeaters composed of ensemble-based memory [ 87 ] . Thus, we can obtain the estimate for p_{\text{b}} by using ( 11 ) and ( 12 ). Note that the quantities t_{\text{b}} , t_{\text{prep}} , and t_{\text{b}}^{\text{class}} are expressed in units chosen such that their numerical values are integers. We also assume that the entangled link produced in the backbone can be transferred to the border node memories without loss. Consequently, the resulting link between the border nodes can also be described by a Werner state ( 1 ) with a Werner parameter w_{\text{b}} and corresponding fidelity f_{\text{b}} such that f_{\text{b}}\!=\!(1\!+\!3w_{\text{b}})/4 . A6 Entanglement swapping : End-to-end entanglement across the IN is created in the following steps: first, entangled links between end and border nodes and in the backbone are created in parallel, which we refer to as elementary links. We adopt the swap-ASAP policy [ 49 ] , i.e., as soon as a border node holds entangled links on both sides, it performs an entanglement swap [ 8 ] . Two such swaps on two border nodes complete the creation of an end-to-end entanglement in the IN. We assume this swap is realised deterministically, since we assume that the border nodes can implement swap using quantum gates and measurements on the qubits in memory. Furthermore, we assume that the swap process is noiseless. This is justified in the context of long-range quantum teleportation, where qubit decoherence due to waiting times during remote entanglement generation is the dominant source of noise. A7 Classical communication time between nodes : At the beginning of each end-to-end entanglement generation round, all participating nodes in the network are synchronised and prepared to initiate entanglement generation with their immediate neighbours. In an elementary link generation attempt, whether between adjacent end nodes or between an end node and a border node, a BSM is performed on the incoming photons at the hub. Based on the outcome, a classical heralding signal is issued to both nodes to indicate the success or failure of the attempt. Similarly, upon completion of the final swap, a classical message is sent to both end nodes, confirming successful end-to-end entanglement generation. Since the border node is located right next to the metropolitan hub, the time to send a message from a border node to a neighbouring end node is t_{\text{m}}^{\text{class}} . Denoting by t_{\text{b}}^{\text{class}} the time for propagation of a message across the backbone A5 , the total communication delay associated with the final notification is given by \displaystyle t_{\text{msg}}=t_{\text{m}}^{\text{class}}+t_{\text{b}}^{\text{class}}~. (13) This communication time is shown in Fig. 2 . Consequently, the communication time across the IN between two end nodes belonging to different metropolitan networks, e.g., \text{P}_{1} and \text{P}_{3} (see Fig. 2 ), is given by \displaystyle t_{\text{int}}^{\text{class}}=2t_{\text{m}}^{\text{class}}+t_{\text{b}}^{\text{class}}~. (14) Figure 2 : Classical communication time between nodes in an intercity quantum network. A8 Cut-off time : Due to the probabilistic nature of elementary link generation, links that are generated earlier must wait until a neighbouring link is formed to start entanglement swapping. During this period, links decay in the memory, which degrades the overall fidelity of the final link. To mitigate the effects of decoherence, a common strategy is to employ a cut-off mechanism [ 22 ] where old degraded links are discarded and replaced with freshly prepared links. In our model for single-shot entanglement generation across the intercity network, we implement this strategy as follows: initiate entanglement generation trials by simultaneously starting generation attempts across all elementary links. A timer activates upon the successful establishment of the first link. If the remaining links are established within a predetermined cut-off time t_{\text{cut}} , we perform entanglement swaps between adjacent links as they become available, ultimately yielding an end-to-end link after the final swap. Conversely, if all required links are not created within t_{\text{cut}} , all active links are discarded, and the entanglement generation process restarts across the network. This entire approach is commonly referred to as a global cut-off strategy in literature, e.g. [ 35 ] . As mentioned earlier, we define a round as a whole trial to establish an end-to-end link, composed of multiple attempts for elementary link generation. A round is considered successful if the time interval between the earliest and latest generated elementary links remains below a specified cut-off time. While a lower cut-off time t_{\text{cut}} improves the fidelity of the end-to-end link by reducing the storage time of qubits, it leads to a reduction in the corresponding entanglement generation rate, as more links are discarded. Following [ 3 ] , we vary t_{\text{cut}} within the range \displaystyle t_{\text{cut}}/t_{\text{coh}}\in[0.01,1]~, (15) where t_{\text{coh}} denotes the memory coherence time. Moreover, the cut-off time must be sufficiently large to accommodate both the time required for entanglement generation attempts on individual links ( t_{\text{m}},t_{\text{b}} ) and the classical communication delays ( t_{\text{msg}} ). In this work, time is treated as a discrete variable, taking values in the set of natural numbers. Thus, we obtain the following range for the cut-off time: \displaystyle t_{\text{cut}}\in\left(\max\left\{t_{\text{m}},t_{\text{b}},t_{\text{msg}},0.01\,t_{\text{coh}}\right\},\ t_{\text{coh}}\right]\cap\mathbb{N}=:T_{\text{cut}}~. (16) Note that our analysis in Sec. 5.1 only requires the lower bound of t_{\text{cut}} , but not the upper bound. Also, cut-off times exclusively apply to HEG between end nodes involving multiple links and the data qubits are never discarded. Note that, as per our cut-off strategy for single-shot entanglement generation in the intercity network, the decision to restart is determined independently at each link based on its generation attempt. However, it is possible to enhance the end-to-end entanglement generation rate by adopting more flexible cut-off strategies, for instance, one may discard and restart only those links whose generation time exceeds t_{\text{cut}} , while retaining other successfully generated links. This process continues until all three links are generated within a t_{\text{cut}} time window. Analysing this cut-off policy is more involved and is left as future work. A9 Data qubit preparation, local gate operation, and qubit measurement : Although the time scales associated with qubit initialisation, gate operations, and measurements vary across different physical platforms, it is orders of magnitude shorter than the entanglement generation times and classical message propagation times in networks where nodes are separated by hundreds of kilometres. For example, durations for local operations such as qubit preparation, gate operation, and measurement in trapped-ion systems typically lie in the range of hundreds of nanoseconds to a few microseconds [ 3 , 17 ] . For colour centres, these operations can range from a few nanoseconds to a few microseconds [ 44 , 66 , 86 , 70 , 48 ] . In contrast, classical communication between spatially separated nodes over hundreds of kilometres incurs delays on the order of milliseconds, constrained by the speed of light in optical fibre (approx. 5\,\mu\text{s/km} ). Furthermore, entanglement generation between distant nodes typically requires multiple attempts due to the probabilistic photon generation process, photon loss through fibre, detector inefficiencies, and the probabilistic nature of heralding, which significantly increases the overall time required for entanglement generation. Due to this pronounced separation of time scales, we assume that the local operations are instantaneous relative to the long-distance entanglement generation time. Note that in the HEG process, we account for the local experimental overheads separately in A3 and A4 via ( 5 ) and ( 8 ), which can range from several hundred microseconds to milliseconds per attempt [ 51 ] . Equipped with these assumptions, we now formally describe Q1 – Q4 . 4 Objectives and Methods In this section, we present the methodology for determining the necessary requirements to achieve teleportation with a desired level of quality in the network shown in Fig. 1 . Specifically, we address Q1 - Q4 . We observe that the teleportation rate and the expected fidelities of ER and QR teleportation in the MNs and IN depend on the hardware parameters as shown in Tab. 2 . In addition, we include the non-hardware parameter cut-off time t_{\text{cut}} (in parentheses) to show its influence on the performance-relevant metrics. Table 2 : Description of quantities of interest and the influencing parameters. Quantities of interest Influencing parameters Metropolitan network (MN) : Teleportation rate R_{\text{m}} p_{\text{m}}^{0} Expected ER teleportation fidelity \mathbb{E}(F_{\text{m}}^{\text{ER}}) p_{\text{m}}^{0} , t_{\text{coh}} , f_{\text{m}^{\prime}} Expected QR teleportation fidelity \mathbb{E}(F_{\text{m}}^{\text{QR}}) p_{\text{m}}^{0} , t_{\text{coh}} , f_{\text{m}^{\prime}} Intercity network (IN) : Teleportation rate R_{\text{int}} p_{\text{m}}^{0} , p_{\text{b}} , ( t_{\text{cut}} ) Expected ER teleportation fidelity \mathbb{E}(F_{\text{int}}^{\text{ER}}) p_{\text{m}}^{0} , t_{\text{coh}} , f_{\text{m}} , p_{\text{b}} , f_{\text{b}} , ( t_{\text{cut}} ) Expected QR teleportation fidelity \mathbb{E}(F_{\text{int}}^{\text{QR}}) p_{\text{m}}^{0} , t_{\text{coh}} , f_{\text{m}} , p_{\text{b}} , f_{\text{b}} , ( t_{\text{cut}} ) Note that under our assumption of instantaneous local operations, the teleportation rates are identical for both teleportation types in the MN and IN. Our primary objective is to identify the combination of hardware parameters required to achieve the target teleportation fidelity 2/3 in the MN and IN. Within the feasible parameter space, we seek to determine the minimal hardware improvement required over the state-of-the-art parameters, with respect to the cost function introduced in the next section. 4.1 Optimisation Framework and Hardware Cost We recall from Q1 – Q4 that our first objective is to investigate whether the state-of-the-art hardware can achieve the target teleportation fidelity f_{\text{target}}\!:=\!2/3 . To that end, we characterise the feasible parameter range that helps attain this threshold. Let \vec{\lambda} denote the generic hardware parameter vector determining the expected fidelity of teleportation \mathbb{E}(F) , where {F\in\{F_{\text{m}}^{\text{ER}},F_{\text{m}}^{\text{QR}},F_{\text{int}}^{\text{ER}},F_{\text{int}}^{\text{QR}}\}} ; see Tab. 2 for the explicit forms of \vec{\lambda} and F . In addition, Tab. 2 shows the dependence of F on the optional non-hardware parameter t_{\text{cut}} . Denoting the feasible hardware parameter space as {\Lambda} and the range of t_{\text{cut}} as T_{\text{cut}} , the desired range of hardware parameters can be written as \displaystyle\Lambda_{+} \displaystyle:=\{\vec{\lambda}\in{\Lambda}\!:\max_{t_{\text{cut}}\in T_{\text{cut}}}\mathbb{E}\big(F(\vec{\lambda}\mid t_{\text{cut}})\big)\geq f_{\text{target}}\}\,,~\text{where}~{\Lambda}:=\times_{i=1}^{m}[\underaccent{=}{\lambda}^{(i)},\overline{\lambda}^{(i)}]~, (17) with \underaccent{=}{\lambda}^{(i)} , \overline{\lambda}^{(i)} , and m respectively denoting the lowest possible value of the i th hardware parameter, its optimistic value, and the total number of hardware parameters influencing the expected teleportation fidelity \mathbb{E}(F) . The optimistic values represent projections by experimental groups for achievable performance in the near future; see Sec. 4.3 . Since these projections are based on current experimental status and possible room for improvements, it remains uncertain a priori whether these optimistic values are sufficient to achieve the target teleportation performance. Therefore, we impose \overline{\lambda}^{(i)} as an upper bound in ( 17 ) to identify, if it exists, the most accessible point in the parameter space that meets the required criteria. Note that the vertical bar preceding t_{\text{cut}} in the expression for F in ( 17 ) highlights that it is a non-hardware parameter, relevant only to teleportation in the intercity network. Furthermore, the specific form of T_{\text{cut}} is provided in ( 16 ). Furthermore, we define the baseline parameters, denoted as \underline{\lambda}^{(i)} , to represent the current state-of-the-art values such that \underline{\lambda}^{(i)}\in[\underaccent{=}{\lambda}^{(i)},\overline{\lambda}^{(i)}] , for all i . In our evaluation, we specifically adopt the baseline and optimistic parameter sets corresponding to experiments with trapped-ion and ensemble-based memories; see Sec. 4.3 for more details. It is evident that if the state-of-the-art (i.e., baseline) values of the hardware parameter lie in the desired range \Lambda_{+} , which achieves teleportation with target fidelity, no further hardware improvement is required for attaining our objective. Otherwise, we aim to find the minimal hardware improvements necessary, in the following space \displaystyle\Lambda_{++} \displaystyle:=\{\vec{\lambda}\in{\Lambda}_{\text{base}}\!:\max_{t_{\text{cut}}\in T_{\text{cut}}}\mathbb{E}\big(F(\vec{\lambda}\mid t_{\text{cut}})\big)\geq f_{\text{target}}\}\,,~\text{where}~{\Lambda}_{\text{base}}:=\times_{i=1}^{m}[\underline{\lambda}^{(i)},\overline{\lambda}^{(i)}]~. (18) Then, the minimality of hardware improvement is defined in terms of the cost function [ 3 , 31 , 25 ] denoted h , which leads to the set of resulting hardware parameter values as \Lambda^{\prime}_{*} . That is, \displaystyle\Lambda^{\prime}_{*}:=\{\vec{\lambda}\in\Lambda_{++}\!:h(\vec{\lambda},\underline{\vec{\lambda}})=\min\limits_{\vec{\lambda}^{\prime}\in\Lambda_{++}}h(\vec{\lambda}^{\prime},\underline{\vec{\lambda}})\}\,,~\text{where}~h(\vec{\lambda},\underline{\vec{\lambda}}) \displaystyle:=\sum_{i=1}^{m}\text{IF}(\lambda^{(i)}\!,\underline{\lambda}^{(i)})~, (19) \displaystyle\text{IF}(\lambda^{(i)}\!,\underline{\lambda}^{(i)}) \displaystyle:=\frac{\ln(p^{(i)}_{NI}(\underline{\lambda}^{(i)}))}{\ln(p^{(i)}_{NI}(\lambda^{(i)}))}~, (20) and the functions p^{(i)}_{NI},~i\!\in\![m] denote the probability of no-imperfection , a metric [ 23 ] that maps hardware parameters with varying ranges to [0,1] . In this mapping, the functional value 1 corresponds to ideal performance such as infinite coherence time, perfect link fidelity, and 100\% base efficiency. We provide the specific forms of p_{NI} s in Tab. 3 . Moreover, to quantify the degree of improvement required for each parameter relative to its baseline, we define the improvement factor (IF) as in ( 20 ) and define the hardware cost h as the sum of the improvement factors across all parameters. It is important to note that the hardware cost computed through this methodology serves as a measure of the technical difficulty in enhancing hardware parameters to the specified levels, rather than representing any financial costs. Observe that the definition of the set \Lambda^{\prime}_{*} in ( 19 ) involves solving a constrained optimisation problem, where the constraint {\vec{\lambda}^{\prime}\in\Lambda_{++}} is imposed to ensure that the target performance in ( 17 ) is met. Moreover, restricting the search space to \Lambda_{++} rather than \Lambda_{+} ensures that the optimisation process seeks only parameter improvements, preventing any parameter from being reduced below its baseline value. We adopt the approach called scalarisation [ 65 , 79 ] to convert this into an unconstrained optimisation problem, which is numerically convenient to solve. Specifically, we add the constraint as a large penalty term to the objective function h , yielding a new objective function c , which, due to the presence of the penalty term, may also depend on the non-hardware parameter t_{\text{cut}} : \displaystyle c(\vec{\lambda},\underline{\vec{\lambda}},F\mid t_{\text{cut}}):=\omega_{1}\big(1\!+\!\big(f_{\text{target}}\!-\!\mathbb{E}\big(F(\vec{\lambda}\mid t_{\text{cut}})\big)\big)^{2}\big)\,\mathds{1}_{\mathbb{E}(F(\vec{\lambda}\mid t_{\text{cut}}))