Black hole (BH) junction conditions. Exterior BH geometry with an interior cloud and a new fluid of strings with integrable singularities. Milko Estrada Abstract Regular black holes are often used to address singularities, but they typically involve a potentially unstable de Sitter core and an internal horizon that breaks predictability. Integrable singularities (IS) have recently gained attention because they avoid both issues and exhibit finite tidal forces, allowing nondestructive radial infall. First, we present a new BH solution sourced by a string fluid (FS) that exhibits an IS. Motivated by the divergence of the conserved energy in the cloud of strings (CS) model, we introduce an energy density profile based on the screening of the CS energy density within an FS framework, thereby yielding finite conserved energy. On the other hand, the idea that an interior region, rather than a pointlike mass, can generate a Schwarzschild black hole exterior region has recently gained attention Ovalle 2024 ; Maeda 2025 . This is obtained by matching an interior solution to the Schwarzschild exterior at the event horizon. Secondly, motivated by the variety of singular BH solutions in the literature, we establish the conditions that an interior region with an IS must satisfy in order to represent the interior of a generic exterior BH solution, with Schwarzschild being only a particular case of the latter. We derive the junction conditions (JC) between the interior and exterior regions, showing that they lead to temperature continuity at the interface, while discontinuities in tangential pressure lead to phase transitions. We propose that the nature of the interior region is described by CS and FS, while the exterior corresponds to Reissner–Nordström. I Introduction The observation of gravitational waves produced by the merger of two spinning black holes Abbott et al. 2016 has firmly positioned black holes among the most compelling phenomena in gravitational physics. In general, black hole solutions are characterized by the presence of a central singularity, where the spacetime description breaks down, signaled by the divergence of the curvature invariants. To address this problem, the standard approach involves specifying a particular form of matter within the energy-momentum tensor, which gives rise to regular black holes (RBHs). It is well established that RBH solutions typically include an inner horizon, which can also lead to the presence of a de Sitter–like core near the origin. In this context, several studies have indicated that the inner horizon is inherently unstable Poisson and Israel 1990 ; Brown et al. 2011 . Along the same lines, a more recent study, reference Carballo-Rubio et al. 2023 , argues that instabilities at the cores of regular black holes associated with the inner horizon are inevitable, since the mass inflation phenomenon represents a fundamental feature of RBHs with astrophysical significance. On the other hand, it is also worth noting that, as claimed in reference Ovalle 2023 , predictability breaks down after crossing the inner horizon. As an alternative to RBH solutions, Ref. Lukash and Strokov 2013 proposes a gravitational scenario in which a particle can reach the radial origin without being destroyed. Rather than a potentially unstable de Sitter core associated with an inner horizon, this model exhibits an integrable singularity at the origin. Integrable singularities are characterized by a divergence of the Ricci scalar while their volume integrals remain finite near the center. The elimination of the inner horizon thus prevents possible instabilities. Furthermore, recent studies in Ref. Estrada et al. 2024 show that a central integrable singularity allows for finite tidal forces, extendable radial geodesics, and a weak singularity, as formalized by Tipler’s extension theorem Nolan 2000 . This ensures that an object approaching the central singularity would not undergo spaghettification. In addition, Ref. Casadio et al. 2023 offers a quantum perspective on the existence of such integrable singularities. For other recent applications, see Refs. Ovalle 2023 ; Estrada 2025 ; Arrechea et al. 2025 . On the other hand, String theory posits that the fundamental constituents of the universe are one-dimensional objects called strings Younesizadeh and Jokar 2022 . The dynamics of a single 1-brane string can be extended to an ensemble Yang et al. 2023 , forming a cloud of strings . Embedding such a cloud of strings modifies the spacetime geometry, producing black hole solutions surrounded by cloud of strings Letelier 1979 , and several recent studies have analyzed black holes interacting with string clouds Zafar et al. 2025 ; Javed et al. 2026 ; Gogoi et al. 2025 ; Ahmed et al. 2025 ; Cai et al. 2025 . A generalization of this model includes pressure or tension in the energy–momentum tensor, giving it a structure similar to a perfect fluid, i.e., a fluid of strings Letelier 1983 . In this connection, recently an equation of state \rho(r)=\alpha(r)p(r) was proposed Nunes dos Santos 2025 for a fluid of strings, leading to a regular black hole solution. Following Ref. Aoki et al. 2021 , where the volume integral -\int_{0}^{\infty}4\pi r^{2}T^{0}{}_{0},dr is interpreted as the conserved energy associated with a timelike Killing vector, we note that this integral diverges for the standard string-cloud energy density. Motivated by this, as the first problem in this work we introduce a modified version of the string-cloud energy density within the fluid-of-strings framework. This modification can be interpreted as a geometrical screening of the original distribution. As a result, we show that the volume integral converges to a finite value equal to M , which can be interpreted as the conserved energy charge. In this way, we provide a new fluid-of-strings black hole, constructed through the equation of state \rho(r)=\alpha(r)p(r) . Furthermore, we will show that the Ricci scalar near the origin behaves in a way consistent with an integrable singularity, and that the new solution is also free of a potentially unstable inner horizon. On the other hand, the Schwarzschild solution, which according to Birkhoff’s theorem Hawking and Ellis 2023 is the unique spherically symmetric vacuum solution of Einstein’s equations, possesses a strong central singularity. In this paragraph, we point out some ideas discussed in Ref. Ovalle 2024 . The Schwarzschild black hole features an event horizon, which can be viewed as a membrane of radius h separating two causally disconnected space-time regions: an interior and an exterior one. The interior region, defined by r0 is a constant. Thus, the factor \exp(-r/b) can be regarded as a form of geometrical screening of the cloud of strings energy density, i.e., \rho_{cs}\sim\text{Const}/r^{2}\to\rho^{(fs)}\sim(\text{Const}/r^{2})\exp(-r/b) . We can verify that the spatial integral of the energy density is finite \int_{0}^{\infty}4\pi r^{2}\rho^{(fs)}\,dr=M\Rightarrow\mbox{finite} (6) Thus, following the definition and assumptions of Aoki et al. 2021 , our energy density, which screens the cloud-of-strings profile, yields a finite total energy, in contrast to the original cloud-of-strings profile. The (t,t) – (r,r) and tangential components of the equations of motion are: \displaystyle-\frac{\left(r(1-f_{(fs)})\right)^{\prime}}{r^{2}}= \displaystyle{p}_{r}^{\,\,(fs)}=-{\rho}^{(fs)} (7) \displaystyle\frac{\left(r^{2}(f_{(fs)})^{\prime}\right)^{\prime}}{2r^{2}}= \displaystyle{p}_{\theta}^{\,\,(fs)} (8) Thus, by evaluating our energy density profile, the temporal and radial components of the Einstein equations lead to the following solution f(r)_{(fs)}=1-\frac{2M}{r}\left(1-\exp(-r/b)\right) (9) By comparing Eqs. ( 3 ) and ( 9 ), it is straightforward to note that c_{2}=-2M and, moreover, that: \displaystyle 2M\,\exp\!\left(-\frac{r}{b}\right)=c_{1}\int dr\,\exp\!\left(-\frac{2}{r\,\alpha(r)}\right) \displaystyle- \displaystyle\frac{2M}{b}\exp(-r/b)=c_{1}\,\exp\!\left(-\frac{2}{r\,\alpha(r)}\right) \displaystyle\Rightarrow c_{1}=-\frac{2M}{b}\,\,\land\,\,\alpha(r)=\frac{2b}{r^{2}} (10) Thus, the components -(T^{0}_{\ 0})^{(fs)}=-(T^{1}_{\ 1})^{(fs)} of the energy–momentum tensor ( 1 ) are given by Eq. ( 5 ), while the tangential components are given by: (T^{3}_{3})^{(fs)}=(T^{4}_{4})^{(fs)}=p_{\theta}^{\,\,(fs)}=\frac{M}{8\pi b^{3}}\exp(-r/b) (11) II.1 Integrable singularity The trace of the energy–momentum tensor ( 1 ) is given by T^{(fs)}=-2\rho^{(fs)}+2p_{\theta}^{\,\,(fs)}=-R , where R is the Ricci scalar. Thus, we obtain the following relation: \displaystyle R=-T^{(fs)}=\frac{M}{2\pi b^{2}r^{2}}\exp(-r/b)-\frac{M}{4\pi b^{3}}\exp(-r/b) (12) \displaystyle\Rightarrow R\big|_{r\to 0}\sim r^{-2} (13) Furthermore, replacing Eqs. ( 7 ) and ( 8 ), we obtain r^{2}\cdot R=2\left(r(1-f_{(fs)})\right)^{\prime}-{\left(r^{2}(f_{(fs)})^{\prime}\right)^{\prime}} (14) We note that although the Ricci scalar diverges near the origin, see Eq. ( 13 ), the equations of motion ( 28 ) are integrable and remain free of singularities. This situation can therefore be described as an integrable singularity. II.2 Absence of an inner horizon First, we note that function ( 9 ) behaves near the origin as f_{(fs)}|_{r\sim 0}\sim 1-2M/b , with 2M/b>1 in order for the metric signature to be +,-,-,- near the origin. Moreover, |1-\frac{2M}{b}| is sufficiently large and dominant in the vicinity of the origin, so as to avoid the appearance of a zero of the function f(r)_{(fs)} near the origin. We observe the numerical behavior and the absence of a potentially unstable inner horizon in Fig. 1 . Consequently, our solution lacks the presence of an unstable de Sitter core, unlike other black hole solutions sourced by matter. Figure 1: f(r)_{(fs)} for b=1,M=0.8,0.9,1 . We observe the absence of a potentially unstable inner horizon. On the other hand, we note that the derivative df_{(fs)}/dr=2M/r^{2}\left(1-\exp(-r/b)(1+r/b)\right) is always positive. Consequently, since f(0)_{(fs)}=f_{\min}<0 , there is only a single sign change, from negative to positive, at the event horizon. For both reasons discussed above, we can conclude that there is no presence of a potentially unstable inner horizon. In this way, in this section we have presented a new string fluid solution that represents a geometry with an integrable singularity and the absence of a potentially unstable inner horizon. As mentioned above, in this section we analyze a black hole solution over the entire domain r\in[0,\infty) . Below, in line with this work, we characterize it as the interior region of a Reissner–Nordström black hole. III Black Hole Solutions with an Interior Geometry Featuring an Integrable Singularity In Fig. 2 , we schematically display the configuration of our geometry, which consists of two regions: an interior region, where the radial coordinate runs from the origin to the event horizon at r=h , i.e. r\in[0,h] , and an exterior region, extending from the event horizon to infinity (or to a cosmological horizon, depending on the case). Below, we describe both regions. h r Figure 2: Schematic representation of the interior region r\in[0,h] and the exterior region extending from r=h to the black hole boundary. III.1 Description of the interior spacetime : It corresponds to a static and spherically symmetric spacetime, where the radial coordinate runs over r\in[0,h] . The line element is given by: ds^{2}=-f(r)\,dt^{2}+\frac{dr^{2}}{f(r)}+r^{2}d\Omega^{2}. (15) where h corresponds to the event horizon, such that f(h)=0 . Since this region represents the interior of the black hole, the signature of the metric tensor ( 15 ) is +,-,-,- , and therefore f(r)\leq 0 in this region. In this way, f(r) is an increasing function, from its minimum value f(r=0)=f_{\min}<0 up to f(h)=0 . First, we consider the presence of a cosmological constant in this region, where the matter sources in the interior are described by the interior energy–momentum tensor. (T^{\mu}_{\ \nu})^{(in)}=\mathrm{diag}\!\left(-\rho,\,p_{r},\,p_{\theta},\,p_{\theta}\right) (16) The (t,t) – (r,r) and tangential components of the equations of motion are: \displaystyle-\frac{\left(r(1-f)\right)^{\prime}}{r^{2}}+\Lambda= \displaystyle-\rho=p_{r} (17) \displaystyle\frac{\left(r^{2}f^{\prime}\right)^{\prime}}{2r^{2}}+\Lambda= \displaystyle p_{\theta} (18) where we observe that \rho=-p_{r} . The conservation equation reads: Thus, we can define the effective interior energy-momentum tensor (\bar{T}^{\mu}_{\ \nu})^{(\text{in})} , for \Lambda=-3/l^{2} , where l denotes the AdS radius. (\bar{T}^{\mu}_{\ \nu})^{(\text{in})}=\mathrm{diag}\!\left(-\bar{\rho},\,\bar{p}_{r},\,\bar{p}_{\theta},\,\bar{p}_{\theta}\right) (19) Thus, the effective density and pressures are given by \displaystyle\bar{\rho}= \displaystyle\rho+\Lambda=\rho-\frac{3}{l^{2}} (20) \displaystyle\bar{p}_{r}= \displaystyle p_{r}-\Lambda=\frac{3}{l^{2}}+p_{r}=\frac{3}{l^{2}}-\rho=-\bar{\rho} (21) \displaystyle\bar{p}_{\theta}= \displaystyle p_{\theta}-\Lambda=\frac{3}{l^{2}}+p_{\theta} (22) In this way, the equations of motion can be written as: \displaystyle-\frac{\left(r(1-f)\right)^{\prime}}{r^{2}}= \displaystyle\bar{p}_{r}=-\bar{\rho} (23) \displaystyle\frac{\left(r^{2}f^{\prime}\right)^{\prime}}{2r^{2}}= \displaystyle\bar{p}_{\theta} (24) III.2 Description of the exterior spacetime It corresponds to a static and spherically symmetric spacetime, where the radial coordinate runs over r\in[h,r_{b}] , with r_{b} denoting the boundary of the spacetime. In the presence of a cosmological horizon, r_{b}\to r_{c} , where r_{c} is the cosmological horizon. In the absence of the latter, i.e., in asymptotically flat or asymptotically AdS spacetimes, r_{b}\to\infty . The line element is given by: ds^{2}=-f(r)_{E}\,dt^{2}+\frac{dr^{2}}{f(r)_{E}}+r^{2}d\Omega^{2}. (25) The geometry is such that f_{E}(h)=0 . Since this region represents the exterior of the black hole, the signature of the metric tensor ( 25 ) is -,+,+,+ , and therefore f_{E}(r)\geq 0 in this region. We consider the case without a cosmological constant, with an energy–momentum tensor of the form (T^{\mu}_{\ \nu})^{(E)}=\mathrm{diag}\left(-\rho^{(E)},p_{r}^{(E)},p_{\theta}^{(E)},p_{\theta}^{(E)}\right) (26) It is straightforward to observe that the equations of motion can be obtained by replacing f\to f_{E} , \bar{\rho}\to\rho^{(E)} , \bar{p}_{r}\to p_{r}^{(E)} , and \bar{p}_{\theta}\to p_{\theta}^{(E)} in Eqs. ( 23 ) and ( 24 ). IV INTERIOR REGION AS AN INTEGRABLE SINGULARITY In this section, we state the properties that a generic interior solution must satisfy in order to represent an integrable singularity near the origin. In the following sections, we analyze the specific cases in which the interior regions correspond, respectively, to a string cloud and to the new string-fluid solution provided in Section II . The trace of our efective interior energy–momentum tensor ( 19 ) is given by \bar{T}^{(in)}=-2\bar{\rho}+2\bar{p}_{\theta} . Replacing Eqs. ( 23 ) and ( 24 ), we obtain -R=\bar{T}^{(in)}=-\frac{2\left(r(1-f)\right)^{\prime}}{r^{2}}+\frac{\left(r^{2}f^{\prime}\right)^{\prime}}{2r^{2}} (27) where R is the Ricci scalar. Analogously to Section II , this equation corresponds to the trace of the Einstein equations and can be rewritten as r^{2}\cdot R=2\left(r(1-f)\right)^{\prime}-{\left(r^{2}f^{\prime}\right)^{\prime}} (28) Some remarks: 1. We are interested in a function f(r) that is finite at the origin and has no zeros in the interval r\in[0,h] . In this way, near the origin: f(r\sim 0)\sim 1-a+\mathcal{O}(r^{n})\Rightarrow R\sim\frac{\mbox{Cte}}{r^{2}} (29) where a>1 and |1-a| is sufficiently large and dominant compared to the term \mathcal{O}(r^{n}) near the origin, in order to avoid a zero of the function f(r) in the vicinity of the origin. As mentioned above, the absence of zeros in this interval implies the absence of a potentially unstable inner horizon. Although the Ricci scalar has a singularity \sim r^{-2} at the origin, the equations of motion ( 28 ) are integrable, being free of singularities, and lead to a finite solution f(r) at the origin. This situation can be referred to as an integrable singularity. Under these assumptions, one can also observe that the Kretschmann scalar exhibits a singularity at r=0 . K=f^{\prime\prime}(r)^{2}+\frac{4f^{\prime}(r)^{2}}{r^{2}}+\frac{4(f(r)-1)^{2}}{r^{4}} (30) 2. As mentioned, f(r) is an increasing function from its minimum value f(r=0)=f_{\min}<0 up to f(h)=0 . In this way, df/dr>0 for r\in[0,h] , with the temperature T=\left.df/dr\right|_{h^{-}}=\left.df_{E}/dr\right|_{h^{+}} . V Junction conditions To construct a model describing a physically viable compact object, it is necessary to impose a smooth matching between the interior geometry and the exterior spacetime. For this purpose, we will consider the Israel–Darmois matching conditions Israel 1966 . 1. At the surface \Sigma , identified with the event horizon radius r=h , these conditions imply the continuity of the geometry, known as the first fundamental form [ds^{2}]_{\Sigma(r=h)}=0\Rightarrow f(h)=f_{E}(h)=0 (31) where [F]_{\Sigma\,\equiv\,r=h}\equiv F(h^{+})-F(h^{-}) . 2. The second fundamental form is given by [G_{\mu\nu}x^{\nu}]_{\Sigma(r=h)}=0 , where x^{\nu} is a unit vector projected along the radial direction. This implies the following \displaystyle\bar{p}_{r}(h)= \displaystyle p_{r}^{(E)} \displaystyle\frac{1-hf^{\prime}(h)}{h^{2}}= \displaystyle\frac{1-h\cdot\big(f_{E}(h)\big)^{\prime}}{h^{2}} \displaystyle\Rightarrow \displaystyle f^{\prime}(h)=\big(f_{E}(h)\big)^{\prime} \displaystyle\Rightarrow \displaystyle T_{in}=T_{E}=T (32) Since the derivative of f^{\prime}(h) matches the derivative of the exterior region at the event horizon \big(f_{E}(h)\big)^{\prime}=T , in this work we also refer to the derivative of f^{\prime}(h) as the temperature. Thus, the second fundamental form of the Israel–Darmois junction conditions leads to the continuity of the temperature between the interior and exterior regions. 3. As we will see below, this condition is not mandatory, unlike the two previous ones. More specifically, this condition represents a consequence of the discontinuity (or continuity) of the tangential pressure in black hole thermodynamics.We obtain the interior temperature from Eq. ( 24 ). In an analogous way, we obtain the exterior temperature for the corresponding region. Thus, we evaluate Eq. ( 2 ) \displaystyle T_{in}= \displaystyle T_{E} \displaystyle\cancel{h}\left(\bar{p}_{\theta}(h)-\frac{f^{\prime\prime}(h)}{2}\right)= \displaystyle\cancel{h}\left(p_{\theta}^{(E)}(h)-\frac{\big(f^{\prime\prime}(h)\big)_{E}}{2}\right) \displaystyle\frac{3}{l^{2}}+p_{\theta}(h)-\frac{f^{\prime\prime}(h)}{2}= \displaystyle p_{\theta}^{(E)}(h)-\frac{\big(f^{\prime\prime}(h)\big)_{E}}{2} (33) We use \displaystyle C_{in}=T_{in}\frac{dS}{dh}\left(\frac{dT}{dh}\right)^{-1}=T_{in}\frac{dS}{dh}\left(\frac{d}{dh}\,\left(\frac{df}{dh}\right)\right)^{-1} \displaystyle\Rightarrow f^{\prime\prime}(h)=\frac{T}{C_{in}}\frac{dS}{dh} (34) analogously \displaystyle\Rightarrow\big(f^{\prime\prime}(h)\big)_{E}=\frac{T}{C_{E}}\frac{dS}{dh} (35) We assume that the entropy follows the area law, i.e. S=\pi h^{2} , thus evaluating ( 33 ) \displaystyle\frac{C_{\text{in}}-C_{E}}{C_{\text{in}}\cdot C_{E}}= \displaystyle\frac{1}{T\pi h}\,\left(p_{\theta}^{(E)}(h)-\left(\frac{3}{l^{2}}+p_{\theta}(h)\right)\right) \displaystyle\Rightarrow C_{\text{in}}-C_{E}\sim \displaystyle\,\,\,p_{\theta}^{(E)}(h)-\bar{p}_{\theta}(h) (36) thus \displaystyle\mbox{if}\,\,\bar{p}_{\theta}(h)=p_{\theta}^{(E)}(h)\Rightarrow \displaystyle C_{\text{in}}=C_{E} (37) \displaystyle\mbox{if}\,\,\bar{p}_{\theta}(h)\neq p_{\theta}^{(E)}(h)\Rightarrow \displaystyle C_{\text{in}}\neq C_{E} (38) In our case the entropy is continuous. In this way, we test that the first derivative of the Gibbs potential, S=-dG/dT , is also continuous. On the other hand, using C=T\,dS/dT=-\,T\,d^{2}G/dT^{2} , we observe that a discontinuity in the tangential pressure implies the existence of a second-order phase transition . VI Example 1: A Reissner–Nordström Exterior with a Cloud of Strings as the Interior Region with an Integrable Singularity In Section III , we described our geometric setup to represent both the interior and exterior regions of a generic black hole geometry. In Section IV , we formulated the conditions that an interior region must satisfy in order to represent an integrable singularity near the origin, while in Section V we presented the junction conditions between the interior and exterior regions. However, the criteria introduced above must be tested in explicit black hole geometries. In this spirit, we analyze two illustrative examples. In the present section, we study a Reissner–Nordström exterior with a cloud of strings as the interior region. In the following section, we consider a Reissner–Nordström exterior with the new string-fluid solution provided in Section II . Remarks on the Reissner–Nordström (RN) Black Hole: the electromagnetic field has an energy-momentum (EM) tensor that is symmetric and traceless, constructed from the Maxwell field tensor F_{\mu\nu}=\nabla_{\mu}A_{\nu}-\nabla_{\nu}A_{\mu} . The Maxwell equations are given by \nabla_{\mu}F^{\mu\nu}=0 and \nabla_{[\gamma}F_{\mu\nu]}=0 . Solving the Einstein–Maxwell equations for a static, spherically symmetric electric charge leads to the RN metric. In this case, the metric function f_{E}(r) appearing in the line element ( 25 ), expressed in natural units, is given by f(r)_{E}=1-\frac{2M}{r}+\frac{Q^{2}}{r^{2}} (39) where M,Q correspond to the mass and electric charge, respectively. The inner and event horizons, r_{-} and h , are given, respectively, by: \displaystyle r_{-}=M-\sqrt{M^{2}-Q^{2}} (40) \displaystyle h=M+\sqrt{M^{2}-Q^{2}} (41) Thus, we note that it must be satisfied that M>Q\Rightarrow M^{2}-Q^{2}>0 . As we have mentioned, in our setup, the exterior geometry extends over r\in[h,r_{b}] , with the boundary corresponding to the radial coordinate approaching infinity, since the solution is asymptotically flat. Therefore, we are interested in the aforementioned range of the radial coordinate. The temperature is given by: T=\frac{1}{4\pi}\left.\frac{df_{E}}{dr}\right|_{r=h}=\frac{1}{4\pi}\frac{2\sqrt{M^{2}-Q^{2}}}{\left(M+\sqrt{M^{2}-Q^{2}}\right)^{2}} (42) The exterior energy–momentum tensor ( 26 ) takes the form: (T^{\mu}_{\ \nu})^{(E)}=\mathrm{diag}\left(-\rho^{(E)}=-E^{2}(r),p_{r}^{(E)}=-E^{2}(r),p_{\theta}^{(E)}=E^{2}(r),p_{\theta}^{(E)}=E^{2}(r)\right) (43) For our line element, the electric field is given by E(r)=\sqrt{-F_{01}F^{01}}=\frac{Q}{r^{2}}\,. (44) VI.1 Representation of a Cloud of Strings as an Interior Region with an Integrable Singularity In this subsection, we explore a possible nature of the matter sources that could give rise to an interior region characterized by an integrable singularity. Specifically, we consider a cloud of strings as a potential matter source. In this context, as previously mentioned, the embedding of an ensemble of 1-branes—the so-called cloud of strings—can deform the spacetime geometry Letelier 1979 . See Appendix A for a more detailed description of a cloud of strings. The interior energy–momentum tensor (T^{\mu}_{\ \nu})^{(in)} , equations ( 16 ), reported in reference Letelier 1979 , Eq. ( 68 ), has the form (T^{\mu}_{\ \nu})^{(in)}=\mbox{diag}\left(-\rho,-\rho,0,0\right) (45) where the energy density originates from Eq. ( 69 ) has the form \rho=\frac{a}{r^{2}} (46) Thus, from equations ( 20 ),( 21 ), ( 22 ), we note that the interior energy density and effective pressures take the following form \bar{\rho}=-\bar{p}_{r}=\frac{a}{r^{2}}-\frac{3}{l^{2}}\,\,,\,\,\bar{p}_{\theta}=\frac{3}{l^{2}} (47) Thus, we can observe that the trace of the effective interior energy-momentum tensor (\bar{T}^{\mu}_{\ \nu})^{(\text{in})} , given by equations ( 19 ), ( 20 ), ( 21 ) and ( 22 ) is \bar{T}^{(\text{in})}=-2\bar{\rho}+2\bar{p}_{\theta}=-\frac{2a}{r^{2}}+\frac{12}{l^{2}}=-R. (48) Thus, we note that the energy-momentum tensor behaves as R\sim r^{-2} at short length scales. This implies that the equations of motion ( 28 ) are integrable near the origin, being free of singularities. Thus, condition IV 1 is satisfied for the string cloud model to represent the interior region as an integrable singularity. Below, we present a solution to the equations of motion characterized by the sources of a cloud of strings together with a cosmological constant, as given in Eq. ( 47 ). The solution of the equations of motion ( 23 ) and ( 24 ), together with the trace equation ( 28 ), gives rise to the following metric function f(r) , which remains finite at the origin f(r)=1-a+\frac{r^{2}}{l^{2}} (49) where a>1 and |1-a| is sufficiently large compared to the term r^{2}/l^{2} near the origin, in order to avoid a zero of the function f(r) in the vicinity of the origin. We have set the integration constants to zero since they lead to a singularity in the metric tensor. This result is further reinforced by the fact that, in this work, we are interested in an interior geometry associated with an integrable singularity, for which the Ricci tensor is such that the equations of motion remain integrable. In order to test condition IV 2 for the interior region to be represented as an integrable singularity, we note that f(r) is an increasing function, starting from its minimum value f(r=0)=1-a<0 , with a>1 , and reaching f(h)=0 . Indeed, df/dr=2r/l^{2}>0 for r\in[0,h] , and therefore the function is monotonically increasing and negative throughout this interval. Therefore, we point out that the parameter a must satisfy a>1 in order for this condition to be fulfilled. VI.2 Junction conditions: As mentioned in Equation ( 41 ), the event horizon of the external RN region is given by h=M+\sqrt{M^{2}-Q^{2}} . • In order to satisfy junction condition V . 1 , i.e. the so-called first fundamental form of the Israel–Darmois formalism, upon evaluating the functions ( 39 ) and ( 49 ) on ( 31 ), one obtains the following condition a=1+\left(\frac{M+\sqrt{M^{2}-Q^{2}}}{l}\right)^{2} (50) which is consistent with the previously mentioned condition that a>1 . • In order to satisfy the junction condition V . 2 , i.e., the so-called second fundamental form of Israel–Darmois, and by using Equation ( 2 ), the continuity of the temperature at the event horizon r=h leads to the following value of the cosmological constant in the interior region: \Lambda=-\frac{3}{l^{2}}=-\frac{3\sqrt{M^{2}-Q^{2}}}{\left(M+\sqrt{M^{2}-Q^{2}}\right)^{3}} (51) • As mentioned, the third condition III. 3 is not mandatory like the previous two, since it does not stem from the Israel–Darmois junction conditions. However, it is useful to test whether a phase transition occurs at the event horizon r=h . Using Equation ( 3 ): C_{\text{in}}-C_{E}\sim\bar{p}_{\theta}(h)-p_{\theta}^{(E)}(h)=-\Lambda-\frac{Q^{2}}{h^{4}}=\frac{3M\left(M+\sqrt{M^{2}-Q^{2}}\right)-4Q^{2}}{\left(M+\sqrt{M^{2}-Q^{2}}\right)^{4}}. (52) Testing the denominator of the last equation for zero leads us to: \displaystyle Q^{2}\left(\frac{16Q^{2}}{9M^{2}}-\frac{5}{3}\right)=0\Rightarrow Q_{c}^{2}=\frac{15}{16}M^{2} (53) where the previously mentioned condition M^{2}>Q^{2} is satisfied for Q=Q_{c} . We have discarded Q=0 , since this would lead to an external solution without electric charge. That is, for all values of Q^{2}\neq Q_{c}^{2} , a second-order phase transition occurs at r=h for the parameters mentioned above. Conversely, for Q^{2}=Q_{c}^{2} , no phase transition occurs at this location. VII Example 2: A Reissner–Nordström Exterior with a new fluid of Strings as the Interior Region with an Integrable Singularity In Section II , a new string fluid solution was introduced. There, it was presented under the assumption that it extends over the entire spacetime, r\in[0,\infty) . In the present section, we analyze instead the case in which the solution of Section II , in the presence of a negative cosmological constant, is defined only in the interval r\in[0,h] , i.e., it can represent the interior region of the Reissner–Nordström solution, as depicted in Scheme 2 . It is worth mentioning that, in Section VI , we have already highlighted the main features of the Reissner–Nordström solution that are relevant to this work. VII.1 Representation of the New Fluid of Strings solution as an Interior Region with an Integrable Singularity The effective interior energy–momentum tensor ( 19 ), obtained from Eqs. ( 20 ), ( 21 ), and ( 22 ), ( 5 ) and ( 11 ), takes the following form \displaystyle\bar{\rho}=-\bar{p}_{r}=\frac{M}{4\pi b^{2}r^{2}}\exp(-r/b)-\frac{3}{l^{2}} (54) \displaystyle\bar{p}_{\theta}=\frac{M}{8\pi b^{3}}\exp(-r/b)+\frac{3}{l^{2}} (55) We can observe that the trace of the effective interior energy–momentum tensor (\bar{T}^{\mu}_{\ \nu})^{(\text{in})} , which includes the contribution of the cosmological constant, is given by \bar{T}^{(\text{in})}=-2\bar{\rho}+2\bar{p}_{\theta}=-\frac{M}{2\pi b^{2}r^{2}}\exp(-r/b)+\frac{M}{4\pi b^{3}}\exp(-r/b)+\frac{12}{l^{2}}=-R. (56) Thus, the trace of the effective interior energy–momentum tensor with a cosmological constant behaves as R\sim r^{-2} at short length scales. This behavior implies that the equations of motion ( 28 ) are integrable in the vicinity of the origin and remain free of pathological singularities. Consequently, condition IV 1 is satisfied, allowing this new string fluid model to consistently represent the interior region as an integrable singularity. The solution is given by: f(r)=1-\frac{2M}{r}\left(1-\exp(-r/b)\right)+\frac{r^{2}}{l^{2}} (57) which behaves as f\mid_{r\sim 0}\sim 1-\frac{2M}{b}+\frac{r^{2}}{l^{2}} near the origin, with \frac{2M}{b}>1 and |1-\frac{2M}{b}| sufficiently large compared to the term \frac{r^{2}}{l^{2}} in the vicinity of the origin, so as to avoid a zero of the function f(r) near the origin. In order to test condition IV 2 for the interior region to be represented as an integrable singularity, we note that f(r) is an increasing function, starting from its minimum value f(r=0)=1-\frac{2M}{b}<0 , with \frac{2M}{b}>1 , and, as we shall see below, reaching f(h)=0 . Indeed, df/dr=\frac{2M}{r^{2}}\left(1-\exp(-r/b)\left(1+\frac{r}{b}\right)\right)+\frac{2r}{l^{2}}>0 for r\in[0,h] . VII.2 Junction conditions: In order to satisfy junction condition V 1 , i.e. the so-called first fundamental form of the Israel–Darmois formalism, upon evaluating the functions ( 39 ) and ( 57 ) on ( 31 ), one obtains the following conditions: \frac{2M}{h}\exp(-h/b)=\frac{Q^{2}l^{2}-h^{4}}{h^{2}l^{2}} (58) where the event horizon h is given by Eq. ( 41 ). The previous equation, in turn, leads to the following: l^{2}>\frac{h^{4}}{Q^{2}} (59) In order to satisfy the junction condition V 2 , i.e., the so-called second fundamental form of Israel–Darmois, and by using Equation ( 2 ), the continuity of the temperature at the event horizon r=h leads to the following condition: \frac{2M}{h}\exp(-h/b)=\frac{2b(Q^{2}l^{2}+h^{4})}{h^{2}l^{2}(b+h)} (60) We can observe that the left-hand sides of Eqs. ( 58 ) and ( 60 ) coincide. By equating both equations, we obtain the following value for the AdS radius l^{2}=\frac{h^{4}}{Q^{2}}\cdot\left(\frac{3b+h}{h-b}\right) (61) Thus, for this value of l^{2} , with b,h>0 we must evaluate condition ( 59 ) \displaystyle\frac{3b+h}{h-b}>1 \displaystyle\Rightarrow\frac{4b}{h-b}>0 \displaystyle\Rightarrow h>b (62) where h is given by Eq. ( 41 ). Thus, condition ( 62 ) must be satisfied. As mentioned, the third condition V 3 is not mandatory like the previous two, since it does not stem from the Israel–Darmois junction conditions. However, it is useful to test whether a phase transition occurs at the event horizon r=h . Using Equation ( 3 ): \displaystyle C_{\text{in}}-C_{E}\sim\bar{p}_{\theta}(h)-p_{\theta}^{(E)}(h)=\frac{h}{16\pi b^{3}}\frac{2M}{h}\exp(-r/b)+\frac{3}{l^{2}}-\frac{Q^{2}}{h^{4}} (63) using equations ( 58 ) and ( 61 ) C_{\text{in}}-C_{E}\sim\bar{p}_{\theta}(h)-p_{\theta}^{(E)}(h)=-\frac{Q^{2}(24\pi b^{3}-8\pi b^{2}h-h^{3})}{4\pi b^{2}h^{4}(3b+h)} (64) Numerically, we find that the last equation vanishes for b=b_{c}=0.4116145346\cdot h (65) Hence, there is no phase transition at b=b_{c} , whereas a phase transition occurs for b\neq b_{c} . VIII Discussion and Summary In Section II , we present a new fluid-of-strings (fs) black hole solution defined over the entire domain r\in[0,\infty) and characterized by the equation of state \rho^{(fs)}(r) and p^{(fs)}(r) . Following Ref. Aoki et al. 2021 , where the integral \int_{0}^{\infty}4\pi r^{2}T^{0}{}_{0},dr is interpreted as the conserved energy associated with a timelike Killing vector, we note that this integral diverges for the standard string-cloud energy density. Motivated by this behavior, we introduce a modified energy density for the fluid of strings, which can be interpreted as a geometrical screening of the original string-cloud distribution. As a result, the aforementioned integral converges to a finite value equal to M , which can be interpreted as the conserved energy charge. Although the Ricci scalar diverges near the origin as R\sim r^{-2} , these divergences are integrable, and the spacetime remains free of curvature singularities, allowing the solution to be classified as an integrable singularity. Finally, we show that the solution is free of a potentially unstable de Sitter core and of an inner horizon, whose presence is associated with a breakdown of causality. Motivated by the fact that several black hole solutions sourced by matter fields leading to a destructive central singularity have attracted considerable interest in the literature, and in analogy with Ref. Ovalle 2024 , we have addressed, as a second problem, the existence of an internal geometry inside the event horizon of a generic black hole spacetime. Within this framework, the external geometry is kept completely general, with the Schwarzschild solution appearing only as a particular case. We have focused on scenarios in which the internal structure is endowed with an integrable singularity, in order to avoid the emergence of a potentially unstable de Sitter core and the presence of an inner horizon, since predictability breaks down after crossing the inner horizon. We have investigated the nature of the matter sources capable of supporting such an internal geometry with an integrable singularity, specifically those associated with clouds of strings and with the new string fluid introduced in this work. To this end, in Section IV we have defined the conditions that the internal geometry must satisfy in order to represent an integrable singularity. In Section V we have established the junction conditions between the internal and generic external black hole geometries. We have shown that the second fundamental form of the Israel–Darmois junction conditions Israel 1966 leads to the continuity of the temperature across the interface between the internal and external regions. Furthermore, from the analysis of the junction conditions, we have determined that a discontinuity in the tangential pressure implies the existence of a phase transition at the location of the event horizon, and vice versa. In Sections VI and VI , we studied the cases in which the internal geometry of the Reissner–Nordström spacetime is described, respectively, by a string cloud and by our newly proposed string fluid geometry. In both scenarios, the parameters of the corresponding internal geometries satisfy the conditions listed in Section IV , ensuring the presence of an integrable singularity near the origin, the absence of a potentially unstable de Sitter core, and the absence of an internal horizon that could lead to a breakdown of causality. In Section VI , we determined the allowed values of the energy density parameter a and of the internal cosmological constant required to satisfy both Israel junction conditions at the interface between the external RN region and the internal string cloud region. In addition, we identified a critical value of the electric charge for which no phase transition occurs in the location of the interface between the two regions. In Section VI , we derived the conditions that the AdS radius, the electric charge, the screening parameter b , and the event horizon must satisfy in order to fulfill both Israel junction conditions at the interface between the external RN region and the internal region described by the new string fluid. Moreover, we numerically determined the critical value of the screening parameter for which no phase transition occurs in the location of the interface between the two regions. Appendix A A brief revision of the cloud of string solution In this appendix, we review the necessary tools for our study of the so-called cloud of strings from reference Letelier 1979 . A 1-brane string is parametrized by the parameters \lambda^{a}=(\lambda^{0},\lambda^{1}) , which is embedded into spacetime as x^{\mu}=x^{\mu}(\lambda) . The trajectory of a 1-brane defines a two-dimensional worldsheet. The Nambu–Goto (NG) action for a 1-brane is proportional to the area of this worldsheet. S_{NG}=\int\mathcal{M}\,dA=\int\mathcal{M}\sqrt{-h}d\lambda^{0}d\lambda^{0}\,\,;\,\,h_{ab}=g_{\mu\nu}\frac{\partial x^{\mu}}{\partial\lambda^{a}}\frac{\partial x^{\nu}}{\partial\lambda^{b}} (66) Let \mathcal{M} be a constant such that the action is dimensionless in natural units. Usually, [\mathcal{M}]=[T_{0}/c]=[\text{Force}]=[\text{Energy}/L]=[L^{-2}] , where T_{0} and c are the 1-brane tension and the speed of light, respectively. The induced metric is given by h_{ab} , while \sqrt{-h} corresponds to its determinant. This reference introduces a bivector \Sigma^{\mu\nu} that spans the two-dimensional time-like worldsheet of the string. It can be expressed as \Sigma^{\mu\nu}=\epsilon^{AB}\frac{\partial x^{\mu}}{\partial\xi^{A}}\frac{\partial x^{\nu}}{\partial\xi^{B}}, (67) where \epsilon^{AB} is the two-dimensional Levi-Civita symbol with components \epsilon^{01}=-\epsilon^{10}=-1 . The action in ( 66 ) leads to an energy-momentum tensor for a 1-brane string. This reference shows that for an ensemble or cloud of strings, this tensor takes the form: T^{\mu\nu}=-\frac{\rho_{cs}\,\Sigma^{\mu\alpha}\Sigma_{\alpha}^{\;\;\nu}}{\sqrt{-h}}\,\,;\,\,h=\frac{1}{2}\Sigma_{\mu\nu}\Sigma^{\mu\nu} (68) For the energy–momentum tensor reported in this reference, Eq. ( 68 ), the only nonzero components are T^{0}_{0}=T^{1}_{1} . The conservation equation \nabla_{\mu}T^{\mu\nu}=0 implies that the structure of this tensor is given by -T^{0}_{0}=-T^{1}_{1}=\rho=\sqrt{-h}\,\rho_{cs}=\frac{a}{r^{2}}, (69) where \rho_{cs} can be interpreted as the proper rest energy density of the string cloud. Appendix B Some general aspects of the fluid of strings solution As previously discussed, the original cloud of strings framework was subsequently extended in Ref. Letelier 1983 in order to incorporate the presence of an effective pressure. Within this generalized description, the energy–momentum tensor takes the form T^{\mu\nu}=\left(p+\rho_{cs}\sqrt{-h}\right)\frac{\Sigma^{\mu\lambda}\Sigma^{\nu}{}_{\lambda}}{(-h)}+p\,g^{\mu\nu}, (70) where p and \rho_{cs} denote, respectively, the pressure and the energy density associated with the string fluid. Considering a line element of the form ( 15 ). As indicated in Ref. Soleng 1995 , due to the symmetries of the metric, the only nonvanishing components of \Sigma^{\mu\lambda} are \Sigma^{tr} and \Sigma^{\theta\phi} ; therefore, the determinant of the induced metric satisfies h<0 .