Cosmological phase transitions: from particle physics to gravitational waves, semi-analytically Abstract Motivated by the recent evidence of a stochastic gravitational wave background found by pulsar timing array experiments, we focus on one of the prime cosmological explanations, i.e. a supercooled first order phase transition. If confirmed, it would offer a unique opportunity to probe early Universe dynamics and the related physics beyond the Standard Model of particles and interactions. However, the prediction of the gravitational wave spectrum from a given particle physics scenario requires theoretically and computationally demanding methods. While several tools have been put forward to reduce uncertainties and automatize these computations, we study here the possibility to perform the full pipeline of computations semi-analytically in the 4 ​ D 4D theory, thus avoiding computationally intensive simulations. Our approach yields accurate results that can be used in phenomenological studies and allow for an efficient exploration of the connection between the particle physics models and their cosmological predictions. Silvia Pascoli ∗,† 1 1 1 silvia.pascoli@unibo.it , Salvador Rosauro-Alcaraz †,□ 2 2 2 salvador.rosauro@clermont.in2p3.fr and Matteo Zandi ∗ 3 3 3 matteo.zandi2@studio.unibo.it ∗ Dipartimento di Fisica e Astronomia, Università di Bologna, via Irnerio 46, 40126 Bologna, Italy † INFN, Sezione di Bologna, viale Berti Pichat 6/2, 40127 Bologna, Italy □ Laboratoire de Physique de Clermont Auvergne (UMR 6533), CNRS/IN2P3, Univ. Clermont Auvergne, 4 Av. Blaise Pascal, 63178 Aubière Cedex, France Introduction With the advent of gravitational wave (GW) detection, a novel observational window into the Universe has been opened. The recent evidence for a stochastic gravitational-wave background (SGWB) in the \mathcal{O} (nHz) frequency, reported by several pulsar timing array (PTA) experiments [ 5 , 6 , 88 , 9 , 74 , 68 ] , is particularly intriguing. Although supermassive black hole binaries could explain the signal [ 73 , 87 , 54 ] , this possibility requires strong deviations from standard astrophysical expectations [ 3 , 4 ] and remains much debated [ 49 ] . The PTA signal could also have a cosmological origin, such as first-order phase transitions (FOPTs), domain walls, or scalar-induced GWs, among others [ 2 , 40 , 46 , 66 , 86 , 21 , 53 , 26 , 81 , 47 , 1 , 35 , 84 , 31 , 33 , 32 , 17 , 48 ] , with recent analysis finding a mild preference for a FOPT [ 82 ] . Given that there are no FOPTs in the Standard Model (SM) [ 56 , 10 ] , the observation of a SGWB from such a process in the early Universe would represent a smoking gun signal for physics beyond the Standard Model (BSM). The FOPT is driven by a scalar field that induces the spontaneous symmetry breaking (SSB) of a symmetry of the theory through thermal corrections to its effective potential in the early Universe. The transition proceeds via tunneling from a metastable vacuum to a stable one, leading to the nucleation of true-vacuum bubbles in the primordial plasma. These bubbles expand while interacting with the surrounding plasma, and eventually collide, potentially generating GWs [ 85 , 65 , 57 , 22 ] . An observable SGWB compatible with the PTA signal has been generally related to classically scale-invariant models [ 21 , 48 , 17 , 33 ] , where strong enough supercooling allows for the release of a large amount of latent heat, thus enhancing the resulting SGWB spectrum. Such a signal is typically explained by New Physics (NP) at the \mathcal{O}(\mathrm{GeV}) scale, pointing towards the existence of a light dark sector which interacts weakly with the SM [ 7 , 8 ] . Gaining insight into the NP from the SGWB observation requires predicting the GW spectrum starting from an underlying particle physics model, in particular from the effective potential of the new scalar field. This effective potential contains non-local contributions that depend on the field-dependent masses of the particles running in the loops, as well as on the renormalization scale [ 28 ] . As a result, the tunneling rate must be obtained by numerically solving the bounce equations at each point in model parameter space. Since the allowed parameter space can be very large, a comprehensive numerical scan is often computationally prohibitive. Furthermore, state-of-the-art determinations of the temperature at which GWs are produced require additional numerically intensive, multi-dimensional integrations. Steps towards a (semi-) analytic description of the whole chain of necessary computations have been taken in Refs. [ 59 , 75 , 76 , 77 ] . The common idea is to describe the effective potential as a polynomial up to quartic order, which allows to perform a one-parameter fit for the bounce action that can be exploited universally, instead of relying on numerical methods that need to be used explicitly in every point of the parameter space. While the extensively used high-temperature (HT) expansion indeed allows to write the effective potential as a polynomial, it is not accurate enough, as it is well-known that the convergence of the perturbative expansion is compromised at high temperatures [ 36 , 83 , 61 , 62 ] . Indeed, in the HT limit, the resummation of Daisy diagrams results unavoidable [ 70 , 11 ] . In this work, we go beyond previous analysis by studying not only the well-known HT expansion, but also the inclusion of Daisy contributions projected onto a basis of polynomials, allowing for a fully consistent description of the effective potential in the HT limit relevant for the tunneling process. Moreover, working in the \overline{\mathrm{MS}} renormalization scheme, we consistently take into account the running of the couplings and of the effective potential given that the renormalization scale changes. In fact, the latter is related to the temperature of the plasma for small field values. While state-of-the-art computations rely on the dimensionally reduced theory at next-to-leading order (NLO) [ 45 , 20 , 55 , 50 , 58 ] , we build upon recent results from Ref. [ 27 ] to choose the renormalization scale for which the best agreement between the 4D description we adopt and the 3D effective theory is found. In the analysis of FOPTs there are several key temperatures that need to be determined. In addition to the extensively used critical and nucleation temperatures, the percolation one, which corresponds to the moment when 29% of the Universe is already in the true vacuum phase, actually represents the most relevant one for GW production [ 13 ] . Given that its determination is more involved, the nucleation temperature is often used as a proxy for the moment of GW production, even though the two can differ considerably in supercooled FOPTs, and there are even examples in which one finds percolation but no nucleation temperature [ 14 ] . Importantly, we propose a new method to compute the percolation temperature. By deriving an analytical expression for the fraction of the Universe in the false vacuum, the determination of the percolation temperature is reduced to a root-finding problem, analogous to the procedure used for the nucleation temperature. This method is applicable to a broad class of scenarios, not only the ones considered here. Taken together, the proposed approximations avoid computationally intensive simulations while yielding results precise enough for phenomenological analyses. This paper is organized as follows. In Section 2 we introduce the full pipeline of approximations that allow us to write the effective potential, including Daisy contributions, in terms of a quartic polynomial. Additionally, we discuss the renormalization scale dependence and our choice for its value as a function of the temperature. We devote Section 3 to summarizing the basics of tunneling and previous semi-analytic results for polynomial potentials. In Section 4 we introduce the different relevant temperatures in the FOPT evolution and our approximate analytical solution for the fraction of the Universe in the false vacuum, allowing us to find the percolation temperature. We apply these results to the study of the PTA signal in Section 5 , for two different scenarios, and conclude in Section 6 . Effective potential Consider the most general Lagrangian, with gauge symmetry group \mathcal{G} under which a complex scalar \varphi is charged as well as some fermion fields \psi_{i} . The scalar potential is such that \varphi develops a vacuum expectation value (vev), generating masses for gauge fields and other related particles. The Lagrangian for such a scenario can be generally written as \begin{split}\mathcal{L}=&-\frac{1}{4}F_{\mu\nu}^{\prime A}F^{\prime A\mu\nu}+\left(D_{\mu}\varphi\right)^{\dagger}\left(D^{\mu}\varphi\right)+i\bar{\psi}_{i}\not{D}\psi_{i}-\left(\bar{\psi}_{i}Y_{ij}\psi_{j}\varphi+\mathrm{h.c.}\right)-V_{\mathrm{tree}}(\varphi)\,,\end{split} (1) where D_{\mu} is the covariant derivative, F^{\prime A}_{\mu\nu} the gauge field strength tensor, and Y is a Yukawa matrix. In order to study the dynamics of spontaneous symmetry breaking in the early Universe, we study the effective potential at one loop and at finite temperature [ 72 ] , which is given by \begin{split}V_{\mathrm{eff}}(\varphi,T)=V_{\mathrm{tree}}(\varphi)+V_{\mathrm{loop}}(\varphi)+V_{\mathrm{T}}(\varphi,T)+V_{\mathrm{Daisy}}(\varphi,T)\,,\end{split} (2) in terms of the background field, which we denote for simplicity as \varphi from here onward. Although uncertainties related to renormalization scale or gauge dependence [ 34 , 12 , 51 , 64 , 13 , 39 ] impact the GW spectrum in this approach, their study lies beyond the scope of this work. We note however that these can be mitigated by going to NLO in the dimensionally reduced theory [ 38 , 79 , 78 ] , which is used in state-of-the-art computations of GWs, and that these uncertainties are found to have a small impact on model parameter reconstruction from a given GW signal [ 60 ] . The first term in Eq. ( 2 ) corresponds to the tree-level potential, which we assume to be local and renormalizable, such that it can be written in terms of polynomial operators up to dimension four. The second one is the one-loop contribution to the effective potential at T=0 [ 30 ] , while V_{\mathrm{T}} corresponds to the finite temperature one [ 37 ] . Finally, V_{\mathrm{Daisy}} includes the contribution from Daisy resummation [ 23 ] . This last term needs to be included in order to improve the infrared (IR) behavior of the potential at high temperatures. Working in the \overline{\mathrm{MS}} renormalization scheme and the Landau gauge, we can respectively write V_{\mathrm{loop}} , V_{\mathrm{T}} , and V_{\mathrm{Daisy}} as \begin{split}V_{\mathrm{loop}}(\varphi)=&\frac{1}{64\pi^{2}}\Bigg[\sum_{b}n_{b}m_{b}^{4}(\varphi)\left(\log{\frac{m_{b}^{2}(\varphi)}{\mu^{2}}}-c_{b}\right)-\sum_{f}n_{f}m_{f}^{4}(\varphi)\left(\log{\frac{m_{f}^{2}(\varphi)}{\mu^{2}}}-c_{f}\right)\Bigg]\,,\\ V_{\mathrm{T}}(\varphi,T)=&\frac{T^{4}}{2\pi^{2}}\Bigg[\sum_{b}n_{b}J_{b}\left(\frac{m_{b}^{2}(\varphi)}{T^{2}}\right)-\sum_{f}n_{f}J_{f}\left(\frac{m_{f}^{2}(\varphi)}{T^{2}}\right)\Bigg]\,,\\ V_{\mathrm{Daisy}}(\varphi,T)=&-\frac{T}{12\pi}\sum_{b}\bar{n}_{b}\left[\left(m_{b}^{2}(\varphi)+\Pi_{b}(T)\right)^{3/2}-m_{b}^{3}(\varphi)\right]\,,\end{split} (3) where m_{b\,(f)}(\varphi) denotes the field dependent mass for bosons (fermions) and n_{b\,(f)} is its corresponding number of degrees of freedom. The constant c_{b\,(f)} has values c_{b}=5/6 for vector bosons, and c_{b}=3/2=c_{f} for scalars and fermions, while \mu is the renormalization scale. Couplings entering in Eq. ( 3 ) are implicitly evaluated at the scale \mu through their RG evolution, which we discuss in detail in Subsection 2.4 . Regarding the temperature dependent contributions to the effective potential in Eq. ( 3 ), the thermal functions J_{b\,(f)}(x) are defined as [ 72 ] \begin{split}J_{b\,(f)}(x)\equiv\int_{0}^{\infty}dy\penalty\ y^{2}\log{\left[1\mp\exp{\left(-\sqrt{y^{2}+x}\right)}\right]}\,.\end{split} (4) At high temperatures or small field values, for which one expects x=m^{2}_{b\,(f)}(\varphi)/T^{2}\ll 1 , we can expand these thermal functions to find \begin{split}J_{b}(x)\simeq&-\frac{\pi^{4}}{45}+\frac{\pi^{2}}{12}x-\frac{\pi}{6}x^{3/2}-\frac{1}{32}x^{2}\log{\frac{x}{a_{b}}}\,,\\ J_{f}(x)\simeq&\frac{7\pi^{4}}{360}-\frac{\pi^{2}}{24}x-\frac{1}{32}x^{2}\log{\frac{x}{a_{f}}}\,,\end{split} (5) where a_{b}\equiv 16\pi^{2}\exp{(3/2-2\gamma_{E})} , a_{f}\equiv\pi^{2}\exp{(3/2-2\gamma_{E})} , and \gamma_{E} is the Euler-Mascheroni constant. We will use this approximation extensively in the following. Lastly, we adopt the Arnold-Espinosa approach [ 11 ] to include the Daisy contribution by resumming the zero-modes for bosons, V_{\mathrm{Daisy}} , for which one needs to compute the thermal mass for bosons in the HT limit \Pi_{b}(T) , and \bar{n}_{b} in Eq. ( 3 ) corresponds to the number of degrees of freedom which acquire a thermal mass. We choose this approach given that it matches the prediction obtained at leading order from the dimensionally reduced theory [ 64 , 60 ] . One could resort to other methods, such as the Parwani approach in which all the modes are resummed [ 70 ] . 2.1 High-temperature approximation Taking the HT expansion of the thermal functions from Eq. ( 5 ), we find the following general expression for the effective potential: \begin{split}V_{\mathrm{eff}}(\varphi,T)\simeq&V_{\mathrm{tree}}(\varphi)-\frac{\pi^{2}T^{4}}{90}\left(\sum_{b}n_{b}+\frac{7}{8}\sum_{f}n_{f}\right)+\frac{T^{2}}{24}\left(\sum_{b}n_{b}m_{b}^{2}(\varphi)+\frac{1}{2}\sum_{f}n_{f}m_{f}^{2}(\varphi)\right)\\ &-\frac{T}{12\pi}\sum_{b}n_{b}m_{b}^{3}(\varphi)+\frac{1}{64\pi^{2}}\Bigg[\sum_{b}n_{b}m_{b}^{4}(\varphi)\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-c_{b}\right)\\ &-\sum_{f}n_{f}m_{f}^{4}(\varphi)\left(\log{\frac{a_{f}T^{2}}{\mu^{2}}}-c_{f}\right)\Bigg]+V_{\mathrm{Daisy}}(\varphi,T)\,.\end{split} (6) Note that the logarithmic terms in V_{\mathrm{loop}} and those from V_{\mathrm{T}} in Eq. ( 2 ) combine in such a way that the field dependent mass always cancels between both contributions [ 58 ] . This will motivate us to choose \mu^{2}\propto T^{2} in the following in order to cancel potentially large logarithmic terms in the effective potential. Leaving aside the Daisy contribution for the moment, it is clear from Eq. ( 6 ) that, in the regime m_{b\,(f)}(\varphi)/T\ll 1 and assuming m_{b(f)}\sim g_{b(f)}\varphi (this is always the case for classically scale invariant scenarios), one can always write the three first contributions to the effective potential from Eq. ( 2 ) as a polynomial \begin{split}V_{\mathrm{eff}}(\varphi,T)&\simeq V_{0}+\frac{1}{2}m^{2}(T)\varphi^{2}-\frac{1}{3}K(T)\varphi^{3}-\frac{\lambda(T)}{4}\varphi^{4}+V_{\mathrm{Daisy}}(\varphi,T)\\ &\equiv V_{\mathrm{HT}}(\varphi,T)+V_{\mathrm{Daisy}}(\varphi,T)\,.\end{split} (7) In the second line of Eq. ( 7 ) we have labeled the part of the effective potential that is expanded in the HT limit as V_{\mathrm{HT}} , which will ease our subsequent discussions. The fact that the tunneling process falls naturally in the HT limit [ 58 ] , allowing then to exploit a universal expression to compute S_{3} [ 59 ] , provides the motivation to describe V_{\mathrm{eff}} as a polynomial on \varphi and determine semi-analytically the thermal parameters controlling the production of GWs. We note that, while the HT approximation just discussed can always be applied for \varphi\ll T and for any scalar potential, the case in which SSB already happens at tree-level, as in the SM, is slightly more convoluted. First, the tunneling process is no longer dominated necessarily by the region near small field values \varphi\ll T , justifying the HT expansion. Additionally, scalar masses prevent a direct description of the effective potential in terms of polynomials even in the HT limit. We discuss some possible further approximations for this case in Appendix C . In order to find explicit expressions for the coefficients m^{2}(T) , K(T) , and \lambda(T) , it is necessary to specify a tree-level potential and the particle content. For simplicity, we choose one realization of SSB giving rise to a GW signal compatible with the recent NANOGrav observation [ 17 , 48 , 33 ] : a classically scale-invariant model with a U(1)^{\prime} gauge symmetry and no fermions. This will allow us to write down explicitly V_{\mathrm{tree}}(\varphi) and show the main results of our analysis. The more general case with fermions can explicitly be found in Appendix B . However, our results can also be adopted for other choices of the gauge group \mathcal{G} . 2.2 U(1)^{\prime} classically scale-invariant model The classically scale-invariant tree-level potential for the background field \varphi is given by V_{\mathrm{tree}}(\varphi)=\frac{1}{4}\lambda\varphi^{4}\,, (8) with covariant derivative D_{\mu}\equiv\partial_{\mu}-ig^{\prime}Z^{\prime}_{\mu} , where Z^{\prime}_{\mu} is the new U(1)^{\prime} gauge boson. While this scenario was studied in Refs. [ 77 , 75 , 76 ] using an approach similar to the one we propose here, those works relied on truncating the HT expansion of the thermal functions in Eq. ( 5 ) before the logarithmic terms. As a consequence, additional simplifying assumptions were introduced in order to handle the resulting field-dependent logarithms, leading to a not sufficiently accurate approximation of the effective potential. Moreover, neither Daisy contributions nor the RG evolution were included in the analysis of the tunneling process. Considering the one-loop corrections from the Z^{\prime} gauge boson as in Eq. ( 3 ) at the renormalization scale \mu=\mu_{0} , 1 1 1 Given that couplings depend on the renormalization scale (see Subsection 2.4 ), we specify the couplings and the vev evaluated at \mu=\mu_{0} with a subscript “0”. the scalar develops a non-zero vev \varphi_{0} , while the Z^{\prime} obtains a mass given by m_{Z^{\prime},0}^{2}\equiv g^{\prime 2}_{0}\varphi_{0}^{2} . We neglect the contributions of the scalar field and the Goldstone boson, since in classically scale-invariant scenarios they are expected to be small [ 58 ] , although it is straightforward to include them [ 27 ] . It is customary to exchange the renormalization scale explicitly appearing in the one-loop contribution to the potential with the scalar vev. Doing so, one arrives at the following shape for the effective potential at T=0 : V_{\mathrm{loop}}(\varphi)=\frac{3g^{\prime 4}_{0}}{32\pi^{2}}\varphi^{4}\left(\log{\frac{\varphi}{\varphi_{0}}}-\frac{1}{4}\right)\,, (9) where, at the scale \mu^{2}=\mu_{0}^{2}\equiv m_{Z^{\prime},0}^{2} , the equality \lambda_{0}=g^{\prime 4}_{0}/(16\pi^{2}) needs to be satisfied such that \varphi_{0} is the absolute minimum. Nevertheless, motivated by the results in the HT limit from Eq. ( 7 ), we are interested in keeping the explicit dependence of the potential on \mu^{2} , so that in the following we consider the effective potential written as \begin{split}V_{\mathrm{eff}}(\varphi,T)=&\frac{\lambda}{4}\varphi^{4}+\frac{3}{64\pi^{2}}m_{Z^{\prime}}^{4}(\varphi)\left(\log{\frac{m_{Z^{\prime}}^{2}(\varphi)}{\mu^{2}}}-\frac{5}{6}\right)+\frac{3T^{4}}{2\pi^{2}}J_{b}\left(\frac{m_{Z^{\prime}}^{2}(\varphi)}{T^{2}}\right)\\ &-\frac{T}{12\pi}\left[\left(m^{2}_{Z^{\prime}}(\varphi)+\Pi_{Z^{\prime}}(T)\right)^{3/2}-m^{3}_{Z^{\prime}}(\varphi)\right]\,,\end{split} (10) where m_{Z^{\prime}}^{2}(\varphi)=g^{\prime 2}\varphi^{2} , and we find \Pi_{Z^{\prime}}(T)=g^{\prime 2}T^{2}/3 . For the specific example of the U(1)^{\prime} scale-invariant scenario at hand, we then obtain the following polynomial coefficients that enter in V_{\mathrm{HT}} from Eq. ( 7 ): \begin{split}V_{0}\equiv&-\frac{\pi^{2}T^{4}}{30}\,,\quad m^{2}(T)\equiv\frac{T^{2}}{4}g^{\prime 2}\,,\\ K(T)\equiv&\frac{3T}{4\pi}g^{\prime 3}\,,\quad\lambda(T)\equiv-\lambda-\frac{3}{16\pi^{2}}g^{\prime 4}\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-\frac{5}{6}\right)\,.\end{split} (11) Figure 1: Effective potential without Daisy contributions using the full thermal function J_{b} (red line) or its HT expansion from Eq. ( 5 ) (dashed yellow line), for two different values of the gauge coupling g^{\prime}_{0} at the reference scale \mu_{0}=g^{\prime}_{0}\varphi_{0} . The lower part of the plots shows the relative error, which starts to be large for large values of \varphi/T where the HT expansion is not justified. The vertical asymptote corresponds to the point where the potential crosses zero. We show the comparison between the use of the full J_{b}(x) function in V_{\mathrm{eff}} (solid red line) and its HT approximation from Eq. ( 5 ) (dashed yellow line) in Fig. 1 . At this stage we neglect V_{\mathrm{Daisy}} . We plot results for two reference values of the gauge coupling g^{\prime}_{0} , set at the scale \mu_{0}=m_{Z^{\prime},0} . We then compute V_{\mathrm{eff}} at the scale \mu^{2}=\pi^{2}T^{2} , which is motivated by the comparison between the 3D -NLO effective potential [ 27 ] and the 4D result we study. Accordingly, we run the relevant couplings from \mu_{0} to \mu by solving the RG equations discussed in Subsection 2.4 . The temperature is fixed at T=\varphi_{0}/100 . As can be seen in the upper panels, smaller gauge couplings tend to displace the barrier to larger values of \varphi/T . We can estimate the width of the barrier \varphi_{b} by using the HT expansion [ 77 ] , finding \varphi_{b}\simeq-\frac{2K(T)}{3\lambda(T)}\left[1-\sqrt{1+\frac{9m^{2}(T)\lambda(T)}{2K(T)^{2}}}\right]\,, (12) which depends on the gauge coupling as \varphi_{b}\sim 1/g^{\prime}_{0} . The vertical dotted gray line in Fig. 1 corresponds to the field value at which tunneling takes place, \varphi_{\mathrm{sc}} , and from which it just “rolls down” to the true minimum. More details about the physical interpretation of \varphi_{\mathrm{sc}} can be found in Section 3 . Beyond this point, the shape of the potential has no impact when computing the action S_{3} , quantity which drives the tunneling process. In the lower panels we show the absolute error committed by using the HT expansion, normalized by T^{4} , which clearly shows the excellent agreement between the full and approximated solutions until the escape point \varphi_{\mathrm{sc}} . Although the error grows quickly for large field values at which the HT expansion is no longer justified, we stress that the relative error is at most \mathcal{O}(2\%) for the region of field space we are interested in, i.e. \varphi\lesssim\varphi_{\mathrm{sc}} . This is clearly shown in the lower-right panel, where the larger value of g^{\prime}_{0} drifts the potential barrier to smaller field values. Although there is poor agreement for \varphi/T\gtrsim 5 , this region plays no role in the tunneling process. 2.3 Daisy contribution It is fundamental to include Daisy resummation when considering the HT limit with boson species, as it cannot be neglected when studying the tunneling process [ 58 ] . For classically scale-invariant scenarios, we can parametrize the boson thermal mass as \Pi_{b}(T)=C_{b}g^{\prime 2}T^{2} , which for the U(1)^{\prime} scale-invariant model we study specifies to C_{Z^{\prime}}=C_{b}=1/3 at leading order. In order to use (semi-) analytical solutions for the bounce action S_{3} , we wish to write the full effective potential as a polynomial on \varphi . This means that we also need to find an approximation for the following non-polynomial term (m_{b}^{2}(\varphi)+\Pi_{b}(T))^{3/2}=\Pi_{b}^{3/2}(T)\left(1+\frac{\varphi^{2}}{C_{b}T^{2}}\right)^{3/2}\equiv\Pi_{b}^{3/2}(T)f(x)\,, (13) where we have defined x\equiv\varphi/T and f(x)\equiv(1+x^{2}/C_{b})^{3/2} , such that we can write V_{\mathrm{Daisy}}(\varphi,T)\sim\sum_{n=0}^{4}c_{n}(T)\varphi^{n} . Although extensively found in the literature, Taylor expanding f(x) assuming x\ll 1 is only valid for x\ll C_{b} . In contrast to the HT expansion of the thermal functions we previously introduced, which is valid up to x\sim 1/g^{\prime} , the Taylor expansion of the Daisy contribution would only be valid for x0 , which is our case study. Nevertheless, the same procedure can be followed to obtain the coefficients for C_{b}<0 (with the additional condition that b^{2}+C_{b}<0 ), although we do not write these results explicitly. For scalar contributions one would just need to change the particular value of C_{b} . Using any of the two approximations, we can finally write the Daisy contribution as a polynomial \begin{split}V_{\mathrm{Daisy}}^{\mathrm{Leg}}(\varphi,T)=&V_{\mathrm{Leg},0}+\nu^{3}_{\mathrm{Leg}}\varphi+\frac{1}{2}m^{2}_{\mathrm{Leg}}\varphi^{2}-\frac{1}{3}K_{\mathrm{Leg}}\varphi^{3}-\frac{1}{4}\lambda_{\mathrm{Leg}}\varphi^{4}\,,\\ V_{\mathrm{Daisy}}^{\mathrm{GS}}(\varphi,T)=&V_{\mathrm{GS},0}+\frac{1}{2}m^{2}_{\mathrm{GS}}\varphi^{2}-\frac{1}{3}K_{\mathrm{GS}}\varphi^{3}-\frac{1}{4}\lambda_{\mathrm{GS}}\varphi^{4}\,.\end{split} (17) The polynomial parameters in Eq. ( 17 ), which depend on the temperature, are also written explicitly in terms of c_{n}^{\mathrm{Leg}\,(\mathrm{GS})} in Appendix A . Choosing the Gram-Schmidt approximation for V_{\mathrm{Daisy}} , we can write the full effective potential from Eq. ( 7 ) simply as V_{\mathrm{eff}}^{\mathrm{GS}}(\varphi,T)\simeq V_{0}+V_{\mathrm{GS},0}+\frac{1}{2}(m^{2}+m^{2}_{\mathrm{GS}})\varphi^{2}-\frac{1}{3}(K+K_{\mathrm{GS}})\varphi^{3}-\frac{\lambda+\lambda_{\mathrm{GS}}}{4}\varphi^{4}\,, (18) which can be directly used to compute S_{3} semi-analytically using the results of Ref. [ 59 ] . In contrast, by using V_{\mathrm{Daisy}}^{\mathrm{Leg}} we introduce a tadpole term that needs to be removed. This can be achieved by an appropriate field redefinition, \varphi\rightarrow\tilde{\varphi}-w , such that the effective potential in Eq. ( 7 ), written in terms of \tilde{\varphi} , does not present a linear term. The shift w is implicitly given by the solution to the following cubic equation, whose explicit solutions are given in Appendix A : \nu^{3}_{\mathrm{Leg}}-(m^{2}+m^{2}_{\mathrm{Leg}})w-(K+K_{\mathrm{Leg}})w^{2}+(\lambda+\lambda_{\mathrm{Leg}})w^{3}=0\,. (19) We choose the smallest field shift that removes the tadpole, such that the full effective potential is then \tilde{V}_{\mathrm{eff}}^{\mathrm{Leg}}(\tilde{\varphi},T)=\tilde{V}_{\mathrm{Leg},0}+\frac{1}{2}\tilde{m}^{2}_{\mathrm{Leg}}\tilde{\varphi}^{2}-\frac{1}{3}\tilde{K}_{\mathrm{Leg}}\tilde{\varphi}^{3}-\frac{1}{4}\tilde{\lambda}_{\mathrm{Leg}}\tilde{\varphi}^{4}\,, (20) with the parameters given by \begin{split}\tilde{V}_{\mathrm{Leg},0}\equiv&V_{0}+V_{\mathrm{Leg},0}-\nu^{3}_{\mathrm{Leg}}w+\frac{1}{2}(m^{2}+m_{\mathrm{Leg}}^{2})w^{2}+\frac{K+K_{\mathrm{Leg}}}{3}w^{3}-\frac{\lambda+\lambda_{\mathrm{Leg}}}{4}w^{4}\,,\\ \tilde{m}^{2}_{\mathrm{Leg}}\equiv&(m^{2}+m_{\mathrm{Leg}}^{2})+2(K+K_{\mathrm{Leg}})w-3(\lambda+\lambda_{\mathrm{Leg}})w^{2}\,,\\ \tilde{K}_{\mathrm{Leg}}\equiv&(K+K_{\mathrm{Leg}})-3(\lambda+\lambda_{\mathrm{Leg}})w\,,\\ \tilde{\lambda}_{\mathrm{Leg}}\equiv&(\lambda+\lambda_{\mathrm{Leg}})\,.\end{split} (21) The potential in Eq. ( 20 ) can now also be used to compute the bounce action semi-analytically. The results, which depend on the size of the interval for \varphi/T over which we perform the projection, are shown in Fig. 2 for the U(1)^{\prime} model with C_{Z^{\prime}}=1/3 and two choices of b : we take b=3 in the left panel, and b=5 in the right one. As expected, although the qualitative behavior is similar in both cases, the further away from the origin we try to describe the Daisy contribution in terms of polynomials, the larger the error we make close to the false vacuum. Moreover, although overall V_{\mathrm{Daisy}}^{\mathrm{Leg}} (dash-dotted blue line) describes V_{\mathrm{Daisy}} (solid red line) better than V_{\mathrm{Daisy}}^{\mathrm{GS}} (dashed green line), the latter instead exactly reproduces the Daisy contribution close to the false vacuum. This is because the basis of Legendre polynomials always has \varphi -independent terms that make it impossible to exactly reproduce V_{\mathrm{Daisy}}(\varphi\rightarrow 0,T) . In contrast, V_{\mathrm{Daisy}}^{\mathrm{GS}} is explicitly built to give the same result as the full Daisy contribution at the origin. Figure 2: Comparison between the full Daisy contribution to the effective potential for the U(1)^{\prime} model, shown as a solid red line, and the polynomial approximations. The lower panels show the relative error for each approximation, for b=3 (left) and b=5 (right). The dashed green line corresponds to the Gram-Schmidt procedure, while the dash-dotted blue line to the approximation in terms of Legendre polynomials. 2.4 Renormalization scale In our previous discussion, we highlighted the dependence of V_{\mathrm{eff}}(\varphi,T) on the choice of the renormalization scale \mu^{2} . As advocated in Ref. [ 58 ] , and as justified when studying the HT expansion, we set the renormalization scale to \mu=\mathrm{max}\left[m_{Z^{\prime}}(\varphi),\,\sqrt{\kappa}T\right]\,, (22) where \kappa is just a proportionality constant, which we set to \kappa=\pi^{2} . This value has recently been found to best reproduce the behavior of the effective potential in the dimensionally reduced theory at NLO [ 27 ] , which we take as a reference given its milder renormalization scale dependence and its use in state-of-the-art computations. Note that this is just a choice at this stage, and that other options could also be well motivated, such as \kappa=a_{b} which completely removes the logarithm in the HT expansion in Eq. ( 11 ). The choice of \mu in Eq. ( 22 ) means that for field values near the origin and the potential barrier, for which \varphi\lesssim T , we change the renormalization scale according to the temperature. Instead, for field values near the true minimum \varphi_{0} , and focusing for the moment on supercooled FOPT for which we expect T\ll\varphi_{0} for the milestone temperatures, the appropriate choice for the renormalization scale corresponds to the Z^{\prime} mass. This distinction naturally sets two scales at which we need to study the effective potential in order to describe FOPT dynamics [ 58 ] . It is therefore fundamental to study the full RGE-improved effective potential [ 67 , 25 , 24 , 42 ] , which is equivalent to studying the 3D effective field theory at leading order [ 60 ] . While the mitigation of the renormalization scale dependence of V_{\mathrm{eff}}(\varphi,T) is an important issue when precisely studying GW predictions [ 50 , 13 , 15 , 34 , 60 ] , it goes beyond the scope of our work. We highlight that the approximations we have introduced so far, as well as the ones we will perform to compute the fraction of the Universe in the false vacuum, are independent of the method used to handle the renormalization scale dependence. Whichever method is adopted, its corresponding uncertainty from renormalization scale dependence will always be present. Next, we discuss in detail the RGE of the relevant couplings for the U(1)^{\prime} model that we use as an example. Once we set the Z^{\prime} mass and the U(1)^{\prime} gauge coupling at the reference scale \mu_{0}=m_{Z^{\prime},0}=g^{\prime}_{0}\varphi_{0} , it is easy to check that the tree-level quartic coupling \lambda (see Eq. ( 8 )) needs to satisfy \lambda_{0}=\frac{g^{\prime 4}_{0}}{16\pi^{2}}\,, (23) so that we have radiative symmetry breaking (RSB), and thus a minimum at \varphi_{0} . In order to compute the value of the couplings at different renormalization scales, we need to solve their RGE-flows, given by \begin{cases}\frac{dg^{\prime}}{dt}=&\frac{1}{16\pi^{2}}\frac{g^{\prime 3}}{3}\,,\\ \frac{d\lambda}{dt}=&\frac{1}{8\pi^{2}}\left(3g^{\prime 4}-6g^{\prime 2}\lambda+10\lambda^{2}\right)\,,\end{cases} (24) where t\equiv\log{\mu/\mu_{0}} and we left the t -dependence of the couplings implicit. We have computed the \beta functions (and anomalous dimension) using PyR@TE [ 71 ] and checked them against Ref. [ 48 ] . The exact analytic solutions to Eq. ( 24 ) can be written as \begin{split}g^{\prime 2}(t)=&\frac{24\pi^{2}g^{\prime 2}_{0}}{24\pi^{2}-g^{\prime 2}_{0}t}\,,\\ \lambda(t)=&\frac{g^{\prime 2}(t)}{60}\left[19+\sqrt{719}\tan\left(\tan^{-1}{\left(\dfrac{120\dfrac{\lambda_{0}}{g^{\prime 2}_{0}}-38}{2\sqrt{719}}\right)}+\dfrac{\sqrt{719}}{2}\log{\left(\dfrac{g^{\prime 2}(t)}{g^{\prime 2}_{0}}\right)}\right)\right]\,.\\ \end{split} (25) Finally, the field renormalization is given by \varphi\rightarrow Z^{1/2}_{\varphi}(t)\varphi^{\prime} , with Z_{\varphi}(t)=\exp{\left[-\frac{1}{2}\int_{0}^{t}dx\penalty\ \gamma(x)\right]}\,, (26) where \gamma(x)=-3g^{\prime 2}(x)/(16\pi^{2}) is the anomalous dimension. We can once again perform the integration analytically and find Z_{\varphi}(t)=\exp\left[-\frac{9}{4}\log{\left(\frac{g^{\prime 2}_{0}}{g^{\prime 2}(t)}\right)}\right]\,. (27) While we explicitly include the full running of \lambda(t) and g^{\prime}(t) in our computations, we neglect the correction arising from the field renormalization given that we find Z_{\varphi}(t)\sim\mathcal{O}(1) at percent precision. However, we highlight that its full inclusion is straightforward and would not prevent us from writing V_{\mathrm{eff}}(\varphi^{\prime},T) as a polynomial, and thus from exploiting the analytic results on S_{3} . Including the field renormalization would be tantamount to making the following replacements in the polynomial coefficients: \begin{split}m^{2}(T)\rightarrow m^{2}(T)\,,&\quad K(T)\rightarrow K(T)Z_{\varphi}^{1/2}(t)\,,\\ \lambda(T)\rightarrow\lambda(T)Z_{\varphi}(t)\,,&\quad S_{3}(T)\rightarrow S_{3}(T)Z_{\varphi}(t)\,,\end{split} (28) where the coefficients’ dependence on t is left implicit. The correction to the action arises because S_{3} is computed assuming that the kinetic term for the scalar is canonically normalized, and therefore we need to shift its value. Tunneling action In this section, we summarize previous results from Ref. [ 59 ] in which the bounce action for a polynomial potential was analyzed. Neglecting the tunneling rate in vacuum, which is negligible for the regions of parameter space we are interested in, namely those with g^{\prime}\lesssim 1 [ 59 ] , the probability to transition per unit volume in the early Universe, from a metastable minimum \varphi_{+} to a deeper one \varphi_{0} with V_{\mathrm{eff}}(\varphi_{+})>V_{\mathrm{eff}}(\varphi_{0}) , is given by \frac{\Gamma}{V}=T^{4}\left(\frac{S_{3}(T)}{2\pi T}\right)^{3/2}e^{-S_{3}(T)/T}\,. (29) In order to find the bounce action S_{3}(T) , we need to solve the equations of motion for the scalar [ 29 , 63 ] 3 3 3 An equivalent formalism can be used in order to describe the tunneling process and which can be reduced to a minimization procedure instead of solving an ODE [ 44 , 43 ] , being numerically more stable. \frac{d^{2}\varphi}{d\rho^{2}}+\frac{D-1}{\rho}\frac{d\varphi}{d\rho}=\frac{dV_{\mathrm{eff}}}{d\varphi}\,, (30) with the appropriate boundary conditions \begin{split}\frac{d\varphi}{d\rho}\Bigg|_{\rho=0}=0\,,\quad\lim_{\rho\rightarrow\infty}\varphi=\varphi_{+}\,,\end{split} (31) where \rho\equiv\sqrt{\tau^{2}+|\vec{x}|^{2}} and \tau is the Euclidean time. We are interested in the transition at finite temperature, such that D=3 . In full generality, one needs to solve Eq. ( 30 ) numerically, using for example a shooting method which amounts to finding the initial field configuration \varphi(\rho=0)=\varphi_{\mathrm{sc}} for which the boundary conditions in Eq. ( 31 ) are met. Once the solution \varphi(\rho) is found, the three-dimensional bounce action is given by S_{3}(T)=4\pi\int_{0}^{\infty}d\rho\penalty\ \rho^{2}\left[\frac{1}{2}\left(\frac{d\varphi}{d\rho}\right)^{2}+V_{\mathrm{eff}}(\varphi,T)\right]\,. (32) Applying the results from Section 2 , allowing us to write the effective potential in terms of a quartic polynomial as V_{\mathrm{eff}}(\varphi,T)=V_{0}(T)+m^{2}(T)\varphi^{2}/2-K(T)\varphi^{3}/3-\lambda(T)\varphi^{4}/4 , we can now use the results of Ref. [ 59 ] , where a fit to S_{3}(T) in terms of \kappa\equiv-\lambda(T)m^{2}(T)/K(T)^{2} was found. The following result was obtained S_{3}(T)\simeq\begin{cases}\frac{m^{3}}{K^{2}}B_{3}^{+}(\kappa)\,,&\kappa>0\\ \frac{m^{3}}{K^{2}}B_{3}^{-}(\kappa)\,,&\kappa\leq 0\end{cases}\,, (33) where the functions B_{3}^{\pm}(\kappa) can be found in Ref. [ 59 ] . Thus, profiting from the approximations discussed in Section 2 for the effective potential, one can compute S_{3}(T) without solving Eq. ( 30 ) numerically for each point in parameter space. Figure 3: Bounce action for the U(1)^{\prime} scale-invariant scenario using different approximations for the effective potential and the computation of S_{3}(T) . In both panels, the red solid line corresponds to the result using the full effective potential and computing the bounce action numerically with CosmoTransitions . The green dashed line corresponds to the effective potential in Eq. ( 18 ), the dash-dotted blue one to V_{\mathrm{eff}} in Eq. ( 20 ), and the dotted yellow line neglects the Daisy contribution. In the left panel we compare the impact of different approximations to V_{\mathrm{eff}} on S_{3} , computed using the shooting method. In the right panel, we compare the values of S_{3} , obtained with the fit from Ref. [ 59 ] , for the polynomial potentials against the full result. In the left panel of Fig. 3 , we compare how the different polynomial approximations for V_{\mathrm{eff}} impact the value of S_{3}(T) . We compute the action with the extensively tested shooting routine from CosmoTransitions [ 80 ] in every case. In the right panel, we instead compare the results for S_{3}(T) from Eq. ( 33 ) using the polynomial approximations for V_{\mathrm{eff}} against the full numerical computation without approximations. The full numerical result is shown as a solid red line, the result using the HT expansion together with the Gram-Schmidt (Legendre) approach for Daisy terms as a dashed green (dash-dotted blue) line, and the result neglecting altogether the Daisy contribution is presented as a dotted yellow line. The results shown in the left panel allow us to assess the quality of each polynomial approximation in reproducing the full effective potential around the barrier, and consequently the tunneling action. As we already argued, the tunneling process is mostly sensitive to small field values for supercooled FOPTs, naturally falling in the HT regime. Therefore, it is critical to include Daisy resummation. This can be realized by comparing the results that describe the Daisy term as a polynomial with respect to the case in which we completely neglect the Daisy contribution. While V_{\mathrm{eff}}^{\mathrm{GS}} and \tilde{V}_{\mathrm{eff}}^{\mathrm{Leg}} tend to underestimate the action, introducing a relative error of at most 2\% , we note that neglecting V_{\mathrm{Daisy}} roughly overestimates S_{3} by, at least, 2\% . Note that S_{3} enters exponentially in Eq. ( 29 ), so that even a small relative error in S_{3} can result in a much bigger one in \Gamma/V . Moreover, we can see how neglecting V_{\mathrm{Daisy}} becomes a worse approximation for smaller temperatures, which correspond to larger supercooling linked to better observational prospects for GW detection. This is in contrast to our polynomial approximations, which actually perform better in this region. In the right panel we find a similar trend as in the left one. Neglecting Daisy terms worsens the quality of the results for smaller temperatures, while our polynomial approximations are better in that region. However, we find that the analytical action in Eq. ( 33 ), taken from Ref. [ 59 ] , tends to underestimate the value of S_{3} . Given that both V_{\mathrm{eff}}^{\mathrm{GS}} and \tilde{V}_{\mathrm{eff}}^{\mathrm{Leg}} also underestimate to some extent the value of S_{3} (see left panel), the combination of both approximations worsens the final result down to around \mathcal{O}(5\%) . Nevertheless, comparing the left and right panels showing the relative error, it is obvious that, for the region T\lesssim 10^{-2}\varphi_{0} , our polynomial approximations to the effective potential introduce a negligible error compared to the one arising from the adoption of S_{3} in Eq. ( 33 ). Instead, given that, neglecting the Daisy terms makes the potential barrier larger, thus overestimating the action, the effect of using S_{3} for a polynomial potential in this case gets compensated and translates into a reduction of the overall error for some temperatures. Nevertheless, for large supercooling the error grows when neglecting Daisy contributions, regardless of whether we compute S_{3} numerically or using instead Eq. ( 33 ). Milestone temperatures We devote this section to the computation of the relevant temperatures for the study of the FOPT, namely the critical, nucleation, and percolation temperatures. When studying the percolation temperature T_{p} , which corresponds to the temperature at which GWs are produced, we will introduce an approximation that will allow us to compute the fraction of the Universe in the false vacuum analytically, greatly simplifying the study of FOPTs for phenomenological purposes. We highlight that, while we will study how well our polynomial approximation can describe the FOPT and compute the milestone temperatures using it, the following discussion and approximations are completely independent of the shape of V_{\mathrm{eff}} . They can be adopted in full generality once the tunneling rate, \Gamma/V in Eq. ( 29 ), is computed. 4.1 Critical temperature At the critical temperature T_{c} , the effective potential develops two degenerate vacua separated by a potential barrier. Note that the position of both vacua depends on the temperature. The critical temperature determines the onset of the FOPT, and can be easily obtained by directly studying the effective potential. At this stage in the history of the FOPT, tunneling is not possible, and therefore T_{c} only provides information about the highest temperature at which the FOPT could take place, but has little interest for the subsequent GW production. 4.2 Nucleation temperature The nucleation temperature is that at which approximately one bubble per Hubble volume has been nucleated. It can approximately be found studying the condition \Gamma(T_{n})\simeq H(T_{n})^{4}\,, (34) with the Hubble expansion rate during the FOPT given by H(T)^{2}=\frac{1}{3m_{\mathrm{Pl}}^{2}}\left(\frac{g_{*}\pi^{2}T^{4}}{30}+\Delta V_{\mathrm{eff}}\right)\simeq\frac{\rho_{\mathrm{rad}}(T)}{3m_{\mathrm{Pl}}^{2}}\left(1+\alpha\right)\,. (35) The first term in the parenthesis in Eq. ( 35 ) corresponds to the radiation energy density, while the second represents the vacuum energy density with \Delta V_{\mathrm{eff}}\equiv V_{\mathrm{eff}}(0,T)-V_{\mathrm{eff}}(\varphi_{0}(T),T) , where we assume that at high temperatures we have symmetry restoration and therefore one of the minima is at the origin. The second equality follows in the case of supercooled FOPTs, such that \partial\Delta V/\partial T\ll\Delta V/T at the relevant temperatures for GW production. Finally, m_{\mathrm{Pl}}=2.4\times 10^{18} GeV is the reduced Planck mass. While T_{n} is broadly used as a proxy to study GW production due to its simplicity, numerical simulations show instead that GWs are actually produced at the percolation temperature [ 13 ] (see Subsection 4.3 ). Moreover, there are examples in which we do not find a nucleated bubble per Hubble volume, i.e. there is no nucleation temperature, but still GWs are produced [ 14 ] . 4.3 Percolation temperature The percolation temperature corresponds to the moment in the evolution of the FOPT when 29% of the Universe is in the true vacuum, at which GWs are produced [ 13 , 14 ] . We thus need to study now the fraction of the Universe in the false vacuum P_{f}(T)=e^{-I(T)} , with the exponent given by [ 13 ] I(T)\equiv\frac{4\pi v_{w}^{3}}{3}\int_{T}^{T_{c}}dT^{\prime}\frac{\Gamma(T^{\prime})}{T^{\prime 4}H(T^{\prime})}\left(\int_{T}^{T^{\prime}}\frac{dT^{\prime\prime}}{H(T^{\prime\prime})}\right)^{3}\,. (36) Note that Eq. ( 36 ) implicitly assumes that dT/dt=-TH(T) , and that the velocity at which the nucleated bubbles expand, v_{w} , is constant. The percolation temperature T_{p} is then given by the condition I(T_{p})=-\log{0.71}\simeq 0.34 . While obtaining the nucleation temperature only requires to find the action, something which can already be numerically expensive, computing the percolation temperature instead entails the double integral in Eq. ( 36 ) with the unknown lower integration limits for which the condition I(T_{p})=0.34 is satisfied. For fast FOPT we expect T_{n}\sim T_{p} , such that we can typically use the nucleation temperature. However, this does not need to be the case for a supercooled FOPT, and therefore computing the percolation temperature becomes critical [ 13 ] . In the following, we will introduce some approximations that allow us to determine I(T) analytically, reducing the computation of the percolation temperature from a double integration with unknown limits to a root-finding problem, similar to what is done for the nucleation temperature in Eq. ( 34 ). Overall, we are interested in integrating Eq. ( 36 ) analytically, for which we first need to perform the inner integration. In order to ease the subsequent discussion, we define f(T,T^{\prime})\equiv\frac{4\pi v_{w}^{3}}{3}\frac{1}{H(T^{\prime})}\left(\int_{T}^{T^{\prime}}\frac{dT^{\prime\prime}}{H(T^{\prime\prime})}\right)^{3}\,. (37) Depending on the energy density dominating the expansion rate during the FOPT, the shape of f(T,T^{\prime}) will differ. We consider the case of fast transitions, for which we expect radiation domination, supercooled FOPTs with vacuum domination, and the intermediate case where both contributions are taken into account. • Radiation domination: If the free energy related to the effective potential is not very large, such that \alpha\ll 1 , the transition takes place during radiation domination. In this case the Hubble expansion rate is given by H(T)\simeq g_{*}^{1/2}\pi T^{2}/(3\sqrt{10}m_{\mathrm{Pl}}) , such that we find f_{\mathrm{rad}}(T,T^{\prime})=\frac{4\pi v_{w}^{3}}{3}\frac{8100m_{\mathrm{Pl}}^{4}}{g_{*}^{2}\pi^{4}}\frac{1}{T^{\prime 2}}\left(\frac{1}{T}-\frac{1}{T^{\prime}}\right)^{3}\,, (38) which has a maximum at T^{\prime}=5T/2 . Note that we assumed that g_{*} is constant, which should be a good approximation for fast transitions. Nevertheless, this result can be extended to include the temperature dependence of g_{*}(T) by splitting the integration interval over relevant temperature regions in which g_{*} is approximately constant. • Vacuum domination: During vacuum domination, which will be the case whenever \alpha\gg 1 , we can approximate H(T)\simeq\Delta V_{\mathrm{eff}}^{1/2}/(\sqrt{3}m_{\mathrm{Pl}}) . As previously argued, in the presence of supercooling the temperature dependence of the effective potential is not relevant when computing the energy difference between vacua, which makes the integration of the Hubble expansion rate trivial using the T=0 result. Using this approximation we can identify in this case f_{\mathrm{vac}}(T,T^{\prime})=\frac{4\pi v_{w}^{3}}{3}\frac{9m_{\mathrm{Pl}}^{4}}{\Delta V_{\mathrm{eff}}^{2}}(T^{\prime}-T)^{3}\,. (39) • General case: Neglecting the matter contribution, we write the Hubble expansion rate as H(T)=\sqrt{A+BT^{4}} by identifying A\equiv\Delta V_{\mathrm{eff}}/(3m_{\mathrm{Pl}}^{2}) and B\equiv g_{*}\pi^{2}/(90m_{\mathrm{Pl}}^{2}) . Even in this case it is still possible to perform the inner integral in Eq. ( 36 ) analytically. We find \begin{split}g(T,T^{\prime})\equiv&\int_{T}^{T^{\prime}}\frac{dT^{\prime\prime}}{H(T^{\prime\prime})}=\frac{-i}{(-AB)^{1/4}}\Bigg[F\left(i\sinh^{-1}{\left(\left(-\frac{B}{A}\right)^{1/4}T^{\prime}\right)}\Big|-1\right)\\ &-F\left(i\sinh^{-1}{\left(\left(-\frac{B}{A}\right)^{1/4}T\right)}\Big|-1\right)\Bigg]\,,\end{split} (40) where F(x|m) is the incomplete elliptic integral of the first kind. Using the result in Eq. ( 40 ), we arrive at f_{\mathrm{full}}(T,T^{\prime})=\frac{4\pi v_{w}^{3}}{3}\frac{g(T,T^{\prime})^{3}}{H(T^{\prime})}\,. (41) We show in Fig. 4 the shape for the function f_{i}(T,T^{\prime}) with i= rad, vac, and full taking into account only radiation (blue), only vacuum energy (red), and both (dash-dotted black), respectively. The dashed vertical gray line represents the temperature at which vacuum energy starts to dominate the energy density of the Universe, and therefore its expansion. The left panel corresponds to a case with strong radiation domination, while the right shows an example where the contribution from \Delta V_{\mathrm{eff}} slightly dominates the energy budget of the Universe. Even though the full result interpolates very well between the cases of vacuum domination and radiation domination around the equality temperature in the right panel, we find in general that it is a good approximation to consider either radiation domination for fast FOPTs, or vacuum domination for the computation of T_{p} in supercooled ones. Figure 4: Comparison of the result for f_{i}(T,T^{\prime}) assuming radiation domination (blue), vacuum domination (red) or using the full Hubble expansion rate (black dash-dotted). The vertical dashed gray line represents the temperature below which vacuum energy dominates the expansion of the Universe. In the left panel radiation dominates the energy density of the Universe, while in the right one we have an intermediate case. Once the shape of the function f(T,T^{\prime}) is known, we can turn to solve the final integration in Eq. ( 36 ), which we write as I(T)=\int_{T}^{T_{c}}dT^{\prime}f(T,T^{\prime})\frac{\Gamma(T^{\prime})}{T^{\prime 4}}=\int_{T}^{T_{c}}dT^{\prime}e^{-G(T,T^{\prime})}\,, (42) such that we can perform the integration independently of the particular form of f(T,T^{\prime}) , and where we have introduced, using Eq. ( 29 ), the function G(T,T^{\prime}) given by G(T,T^{\prime})\equiv\frac{S_{3}(T^{\prime})}{T^{\prime}}-\log{f(T,T^{\prime})}-\frac{3}{2}\log{\frac{S_{3}(T^{\prime})}{2\pi T^{\prime}}}\,. (43) The key point to take into account in the following is to notice that the function f(T,T^{\prime}) identically vanishes when T^{\prime}\rightarrow T . For T^{\prime}>T , we find that f(T,T^{\prime}) either has a maximum and again vanishes as T^{\prime}\rightarrow\infty , or that it grows as a polynomial. 4 4 4 The result using f_{\mathrm{full}}(T,T^{\prime}) is less straightforward but should fall between the limiting cases of vacuum and radiation domination. These properties, together with the fact that \Gamma(T^{\prime})/T^{\prime 4} is either monotonically decreasing, or again has a maximum for T^{\prime}\mathcal{P}_{\mathrm{LO}} , and \mathcal{P}_{\mathrm{(N)LO}} are the (next-to-) leading order pressure terms whose expressions can be found, for example, in Ref. [ 52 ] . Additionally, we need to compare \gamma_{\mathrm{eq}} to the Lorentz factor the walls would reach in the absence of \mathcal{P}_{\mathrm{NLO}} , \gamma_{*} , in order to correctly understand the fraction of energy from the FOPT that goes into the production of GWs from bubble collisions, sound waves, and turbulence, respectively. Following Ref. [ 52 ] , we compute \gamma_{*}=\frac{R_{p}}{3R_{0}}\,, (53) with R_{p} the bubble radius at collision which we compute following the approximation advocated in Ref. [ 22 ] R_{p}\equiv\frac{(8\pi)^{1/3}\mathrm{max}(v_{w},c_{s})}{\beta}\,, (54) with c_{s}=1/\sqrt{3} being the sound speed in the plasma, and where R_{0}=\left(\frac{3S_{3}(T_{p})}{2\pi\Delta V_{\mathrm{eff}}}\right)^{1/3} (55) represents the initial bubble radius at nucleation. With these ingredients we follow Ref. [ 41 ] in order to compute the efficiency factors for each GW source. After determining these thermal parameters, the GW spectrum can be computed using the templates of Ref. [ 22 ] for each GW source, including the efficiency factors as prescribed in Ref. [ 41 ] . In order to assess the validity of our approximations to find the viable regions of parameter space compatible with the NANOGrav signal [ 5 , 2 ] , we use PTArcade [ 69 ] to obtain the 1\,(2)\,\sigma Bayesian posterior distributions for \varphi_{0} and g^{\prime}_{0} , adopting the default configuration ceffyl and neglecting contributions from supermassive black hole binaries. For convenience, we summarize below the minimal set of steps required to adopt our results for a generic particle-physics model: • Construct the high-temperature polynomial effective potential V_{\mathrm{HT}} using Eq. ( 6 ) whenever field-dependent masses satisfy m^{2}_{b(f)}\propto\varphi^{2} . • Include Daisy resummation by computing thermal masses and determining the polynomial coefficients via the Gram-Schmidt or Legendre procedure (Appendix A ). • Obtain the temperature-dependent effective potential using Eq. ( 18 ) or Eq. ( 20 ). • Compute the bounce action using the result in Eq. ( 33 ) [ 59 ] , including the RG evolution of couplings. • Determine the percolation temperature from Eq. ( 45 ). • Compute \alpha and \beta/H using Eq. ( 49 ) and Eq. ( 51 ), respectively. We show the results in the left panel of Fig. 6 , comparing the full computation, shown as a red region, with the full pipeline of approximations using the Gram-Schmidt (green) and Legendre (blue) decompositions for Daisy contributions. We additionally show the result of neglecting completely Daisy contributions as a yellow region. While the precise determination of the GW spectrum is indeed sensitive to a variation of the thermal parameters, we conclude that our approximations are precise enough for phenomenological purposes in models which are not strongly constrained. The results from the full computations or for the Gram-Schmidt and Legendre approaches shown in Fig. 6 could now be used to study the reach of laboratory experiments in probing this parameter space, with little impact from the small differences in the preferred parameter space from PTAs. While this is also true even when using only the HT approach and neglecting Daisy contributions [ 60 ] , we went beyond these by including Daisy terms as polynomials and simplifying the approach adopted to find the percolation temperature, improving the agreement with a full numerical analysis. An important advantage of our proposed approximations is that they render the scan of complete parameter spaces feasible: we go from running the necessary Markov Chain Monte Carlo (MCMC) algorithm in PTArcade for weeks to doing so in hours when exploiting these approximations. This allows to assess the viability of a given scenario to produce a signal in GW experiments, and its complementarity with laboratory searches without resorting to heavy numerical computations. Additionally, writing the effective potential as a polynomial allowed for various insights on the dependence of the results of the couplings and masses of the NP scenario under study. One can now apply this methodology to study more involved scenarios predicting supercooled FOPTs, assessing their viability and allowed parameter space. As an example, we consider the same U(1)^{\prime} scale-invariant scenario, but including fermions. The most relevant consequence from the introduction of fermions is that now the Yukawa terms as specified in Eq. ( 71 ) in Appendix B also play a role in the radiative symmetry breaking, such that the following condition \lambda_{0}=\frac{1}{16\pi^{2}}\left[g_{0}^{\prime 4}-y_{0}^{4}\left(1-\log{\frac{y_{o}^{2}}{2g_{0}^{\prime 2}}}\right)\right]\,, (56) needs to be satisfied at the renormalization scale \mu_{0}=m_{Z^{\prime},0} . Given that fermion fields do not introduce new Daisy terms in the effective potential, we can directly use all our previous results by only modifying V_{\mathrm{HT}} , as well as taking into account the changes in the RG evolution with the new couplings involved. These modifications are summarized in Appendix B . The results are shown in the right panel of Fig. 6 , using now solely our full pipeline of approximations with V_{\mathrm{eff}}^{\mathrm{GS}} (green region) and \tilde{V}_{\mathrm{eff}}^{\mathrm{Leg}} (blue one). As can be realized, the inclusion of the fermion Yukawa coupling opens up the allowed values of g^{\prime}_{0} explaining the NANOGrav signal at 1\sigma , while finding a strong correlation between y_{0} and g^{\prime}_{0} . The latter is a consequence of Eq. ( 56 ), and implies a hierarchy of masses between the dark particles, that could have strong phenomenological consequences to be searched for. Conclusions In this work we have studied the possibility to perform the full pipeline of computations pertaining to the prediction of GW production during cosmological FOPTs semi-analytically in classically scale-invariant scenarios. While the starting point is common to previous studies, namely the HT expansion of the effective potential allowing to write it down in terms of a polynomial, we have gone beyond this by consistently introducing Daisy contributions as well. To the best of our knowledge, the latter possibility had never been investigated in detail, even though it is known that Daisy contributions play a critical role in the HT limit of the effective potential. Once the effective potential is described as a polynomial, the semi-analytical results from Ref. [ 59 ] for S_{3} can be exploited, avoiding to solve numerically the equations of motion for the bounce in every point of the parameter space. A crucial point we also investigated is the inclusion of the RG evolution, given that the natural choice for the renormalization scale at small field values, which is the relevant region for tunneling, is proportional to the temperature of the Universe. While the proportionality constant is somewhat arbitrary from the perspective of the 4D theory, we set it to the value for which the 4D effective potential agrees the most with the corresponding 3D -NLO result [ 27 ] . The latter represents the state-of-the-art approach for the study of the effective potential in FOPTs. Next, and independently from previous approximations on the effective potential or S_{3} , we have obtained an analytical estimate for the fraction of the Universe in the false vacuum, greatly simplifying the computation of the percolation temperature. This is important given that, while the nucleation temperature is usually adopted as a proxy for the moment at which GWs are produced, it is instead the percolation temperature the one that sets the time for GW production, as found in numerical simulations. Instead of relying on computationally expensive numerical integrations, we performed the full double integral analytically, allowing to reduce the computation of the percolation temperature from a fully numerical double integration to a root-finding routine, similar to what is done for the nucleation temperature. Our method allowed us also to assess the error introduced in each approximation with respect to the full numerical computation. For the relevant region of parameter space, we found that our description of the effective potential including Daisy terms introduces a \mathcal{O}(2\%) error in the determination of the bounce action, being even smaller for large supercooling. This translates into at most a \mathcal{O}(5\%) error in the percolation temperature when compared to a full numerical determination, in contrast to the \mathcal{O}(20\%) error in the same region of parameter space when neglecting Daisy terms altogether. Nevertheless, we note that not including Daisy resummation does not represent such a bad approximation to the full effective potential for small supercooling. In general, we find that the semi-analytical result on S_{3} for polynomial potentials [ 59 ] represents the biggest source of error with respect to the full numerical computation in our approach. Instead, the analytical estimation of the fraction of the Universe in the false vacuum we proposed, simplifying the determination of the percolation temperature, introduces at most a \mathcal{O}(1\%) error, resulting in an excellent estimation of the percolation temperature regardless of the method adopted to compute S_{3} . We applied our results to the most minimal scenario known to account for the SGWB observed in PTAs, namely a classically scale-invariant model with a new U(1)^{\prime} gauge symmetry, the associated gauge boson and a scalar that breaks it spontaneously. We find that indeed our approximations can be employed not only to avoid the use of computationally intensive methods, but also to gain some insights on the impact of different particle masses and couplings in the final results. We obtain very good agreement between the allowed parameter space found using the full numerical procedure or our pipeline of approximations, while doing so in much less time in the latter case. Finally, profiting from the relatively cheap computational cost of the use of our approximations, we have also studied a second scenario including fermions. Their inclusion impacts the radiative symmetry breaking, and enlarges the allowed parameter space while potentially offering a very rich phenomenology that could be searched for in experiments. All in all, these results could open the window to efficient parameter scans compatible with GW signals that could then be used for phenomenological purposes, enhancing the synergies between laboratory experiments and potential GW observations. Appendix A Polynomial coefficients for the Daisy contribution We give the explicit expressions for the polynomial coefficients obtained when decomposing the Daisy contribution from Eq. ( 13 ) in terms of orthogonal polynomials. For the decomposition in terms of Legendre polynomials in an interval x\in[0,b] , and remembering that we parametrize the thermal and vacuum masses of the relevant boson as \Pi_{b}(T)=C_{b}g^{\prime 2}T^{2} (assuming C_{b}>0 ) and m_{b}^{2}(\varphi)=g^{\prime 2}\varphi^{2} respectively, we find \displaystyle c^{\mathrm{Leg}}_{0}=(8bC_{b})^{-1}\Bigg[ \displaystyle 3C_{b}^{3/2}\Big[\log\left(-\sqrt{b^{2}+4C_{b}}+b+2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle\log\left(\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right)\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right)\right)\Big] \displaystyle+ \displaystyle 5b\sqrt{C_{b}\left(b^{2}+C_{b}\right)}+2b^{3}\sqrt{\frac{b^{2}+C_{b}}{C_{b}}}\Bigg]\,, (57) \displaystyle c^{\mathrm{Leg}}_{1}=3(40b^{2}C_{b})^{-1}\Bigg[ \displaystyle-15bC_{b}^{3/2}\log\left(-\sqrt{b^{2}+4C_{b}}+b+2\sqrt{C_{b}}\right) \displaystyle- \displaystyle 15bC_{b}^{3/2}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 15bC_{b}^{3/2}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 15bC_{b}^{3/2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 16\sqrt{C_{b}^{3}\left(b^{2}+C_{b}\right)}+7b^{2}\sqrt{C_{b}\left(b^{2}+C_{b}\right)}+6b^{4}\sqrt{\frac{b^{2}+C_{b}}{C_{b}}}-16C_{b}^{2}\Bigg]\,, (58) \displaystyle c^{\mathrm{Leg}}_{2}=(16b^{3}C_{b})^{-1}\Bigg[ \displaystyle 120b^{2}C_{b}^{3/2}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 120b^{2}C_{b}^{3/2}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle- \displaystyle 120b^{2}C_{b}^{3/2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 60C_{b}^{5/2}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 60C_{b}^{5/2}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 60C_{b}^{5/2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 66b\sqrt{C_{b}^{3}\left(b^{2}+C_{b}\right)}+4b^{5}\sqrt{\frac{b^{2}+C_{b}}{C_{b}}} \displaystyle- \displaystyle 15\sqrt{C_{b}}\left(b^{4}-8b^{2}C_{b}+4C_{b}^{2}\right)\log\left(-\sqrt{b^{2}+4C_{b}}+b+2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 15\sqrt{C_{b}}\left(b^{4}-6b^{2}C_{b}+2C_{b}^{2}\right)\sinh^{-1}\left(\frac{b}{\sqrt{C_{b}}}\right) \displaystyle- \displaystyle 15b^{4}\sqrt{C_{b}}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 15b^{4}\sqrt{C_{b}}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 15b^{4}\sqrt{C_{b}}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 2b^{3}\sqrt{C_{b}\left(b^{2}+C_{b}\right)}+96bC_{b}^{2}\Bigg]\,, (59) \displaystyle c^{\mathrm{Leg}}_{3}=(80b^{4}C_{b})^{-1}\Bigg[ \displaystyle 2100bC_{b}^{5/2}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 2100bC_{b}^{5/2}\log\left(\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}\right) \displaystyle- \displaystyle 2100bC_{b}^{5/2}\log\left(\frac{\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}}{\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}}\right) \displaystyle- \displaystyle 2100bC_{b}^{5/2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 640\sqrt{C_{b}^{5}\left(b^{2}+C_{b}\right)}+614b^{2}\sqrt{C_{b}^{3}\left(b^{2}+C_{b}\right)}-1344b^{2}C_{b}^{2} \displaystyle+ \displaystyle 4b^{6}\sqrt{\frac{b^{2}+C_{b}}{C_{b}}}-175b^{5}\sqrt{C_{b}}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 175b^{5}\sqrt{C_{b}}\log\left(\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 175b^{5}\sqrt{C_{b}}\log\left(\frac{\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}}{\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}}\right) \displaystyle+ \displaystyle 175b^{5}\sqrt{C_{b}}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle- \displaystyle 35b\sqrt{C_{b}}\left(5b^{4}-4b^{2}C_{b}-60C_{b}^{2}\right)\log\left(-\sqrt{b^{2}+4C_{b}}+b+2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 175b\sqrt{C_{b}}\left(b^{4}-2b^{2}C_{b}-6C_{b}^{2}\right)\sinh^{-1}\left(\frac{b}{\sqrt{C_{b}}}\right)-2b^{4}\sqrt{C_{b}\left(b^{2}+C_{b}\right)} \displaystyle+ \displaystyle 140b^{3}C_{b}^{3/2}\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right) \displaystyle+ \displaystyle 175b^{3}C_{b}^{3/2}\log\left(\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}\right) \displaystyle- \displaystyle 315b^{3}C_{b}^{3/2}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle+ \displaystyle 175b^{3}C_{b}^{3/2}\log\left(\frac{\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}}{\sqrt{b^{2}+4C_{b}}-2\sqrt{C_{b}}}\right) \displaystyle- \displaystyle 140b^{3}C_{b}^{3/2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right)+640C_{b}^{3}\Bigg]\,, (60) \displaystyle c^{\mathrm{Leg}}_{4}=\frac{9}{64b^{5}\sqrt{C_{b}}}\Bigg[ \displaystyle b\Big[256b^{2}C_{b}^{3/2}+407C_{b}^{2}\sqrt{b^{2}+C_{b}}-120bC_{b}^{2}\log\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right) \displaystyle- \displaystyle 120bC_{b}^{2}\log\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right)-82b^{2}C_{b}\sqrt{b^{2}+C_{b}} \displaystyle- \displaystyle 30b^{5}\log\left(\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right)\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right)\right) \displaystyle+ \displaystyle 261b^{3}C_{b}\log\left(\left(\sqrt{b^{2}+4C_{b}}+b-2\sqrt{C_{b}}\right)\left(-2\sqrt{b^{2}+C_{b}}+\sqrt{b^{2}+4C_{b}}+b\right)\right) \displaystyle+ \displaystyle 3\left(10b^{5}-87b^{3}C_{b}+40bC_{b}^{2}\right)\log\left(\left(-\sqrt{b^{2}+4C_{b}}+b+2\sqrt{C_{b}}\right)\right) \displaystyle+ \displaystyle 3\left(10b^{5}-87b^{3}C_{b}+40bC_{b}^{2}\right)\log\left(2\sqrt{b^{2}+C_{b}}-\sqrt{b^{2}+4C_{b}}+b\right)-512C_{b}^{5/2}\Big] \displaystyle- \displaystyle 15\left(2b^{6}-19b^{4}C_{b}+32b^{2}C_{b}^{2}-7C_{b}^{3}\right)\sinh^{-1}\left(\frac{b}{\sqrt{C_{b}}}\right)\Bigg]\,. (61) The Daisy contribution to the effective potential is then given by V_{\mathrm{Daisy}}^{\mathrm{Leg}}(\varphi,T)=V_{\mathrm{Leg},\,0}+\nu^{3}_{\mathrm{Leg}}\varphi+\frac{1}{2}m^{2}_{\mathrm{Leg}}\varphi^{2}-\frac{1}{3}K_{\mathrm{Leg}}\varphi^{3}-\frac{1}{4}\lambda_{\mathrm{Leg}}\varphi^{4}\,, (62) with the following polynomial coefficients: \begin{split}V_{\mathrm{Leg},0}=&-\frac{C_{b}^{3/2}g^{\prime 3}T^{4}(c^{\mathrm{Leg}}_{0}-c^{\mathrm{Leg}}_{1}+c^{\mathrm{Leg}}_{2}-c^{\mathrm{Leg}}_{3}+c^{\mathrm{Leg}}_{4})}{12\pi}\,,\\ \nu^{3}_{\mathrm{Leg}}=&-\frac{C_{b}^{3/2}g^{\prime 3}T^{3}(c^{\mathrm{Leg}}_{1}-3c^{\mathrm{Leg}}_{2}+6c^{\mathrm{Leg}}_{3}-10c^{\mathrm{Leg}}_{4})}{6\pi b}\,,\\ m^{2}_{\mathrm{Leg}}=&-\frac{C_{b}^{3/2}g^{\prime 3}T^{2}(c^{\mathrm{Leg}}_{2}-5c^{\mathrm{Leg}}_{3}+15c^{\mathrm{Leg}}_{4})}{\pi b^{2}}\,,\\ K_{\mathrm{Leg}}=&\frac{g^{\prime 3}T\left(20C_{b}^{3/2}(c^{\mathrm{Leg}}_{3}-7c^{\mathrm{Leg}}_{4})-b^{3}\right)}{4\pi b^{3}}\,,\quad\lambda_{\mathrm{Leg}}=\frac{70C_{b}^{3/2}g^{\prime 3}c^{\mathrm{Leg}}_{4}}{3\pi b^{4}}\,.\end{split} (63) Given that this procedure introduces a tadpole that needs to be removed in order to use previous results on S_{3} , we shift the field as \varphi\rightarrow\tilde{\varphi}-w and find the shifts that solve Eq. ( 19 ). The solution is given by 5 5 5 Note that there are three possible solutions, but we take the one with smallest absolute value w_{k}=-\frac{1}{3(\lambda+\lambda_{\mathrm{Leg}})}\left[-(K+K_{\mathrm{Leg}})+\xi^{k}C+\frac{\Delta_{0}}{\xi^{k}C}\right]\, (64) with k=0,\,1,\,2 , and where we have defined \begin{split}\Delta_{0}=&(K+K_{\mathrm{Leg}})^{2}+3(\lambda+\lambda_{\mathrm{Leg}})(m^{2}+m^{2}_{\mathrm{Leg}})\,,\\ \Delta_{1}=&-2(K+K_{\mathrm{Leg}})^{3}-9(\lambda+\lambda_{\mathrm{Leg}})(K+K_{\mathrm{Leg}})(m^{2}+m^{2}_{\mathrm{Leg}})\\ &+27(\lambda+\lambda_{\mathrm{Leg}})^{2}\nu^{3}_{\mathrm{Leg}}\,,\\ C=&\left(\frac{\Delta_{1}\pm\sqrt{\Delta_{1}^{2}-4\Delta_{0}^{3}}}{2}\right)^{1/3}\,,\\ \xi=&\frac{-1+\sqrt{-3}}{2}\,.\end{split} (65) The sign of the square root in the third line in Eq. ( 65 ) is arbitrary. In the case in which one choice of sign makes C=0 , the other option should be taken. Instead, for the Gram-Schmidt decomposition we find \displaystyle c_{2}^{\mathrm{GS}}=\frac{21C_{b}^{5/2}}{32b^{7}}\Bigg[ \displaystyle 12\left(\frac{b}{\sqrt{C_{b}}}\right)^{5}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}-32\left(\frac{b}{\sqrt{C_{b}}}\right)^{5}-512\left(\frac{b}{\sqrt{C_{b}}}\right) \displaystyle- \displaystyle 210\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}+377\left(\frac{b}{\sqrt{C_{b}}}\right)\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1} \displaystyle+ \displaystyle 44\left(\frac{b}{\sqrt{C_{b}}}\right)^{3}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}+135\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}\Bigg]\,, (66) \displaystyle c_{3}^{\mathrm{GS}}=\frac{C_{b}^{5/2}}{80b^{8}}\Bigg[ \displaystyle 80\left(\frac{b}{\sqrt{C_{b}}}\right)^{7}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}-1048\left(\frac{b}{\sqrt{C_{b}}}\right)^{5}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1} \displaystyle- \displaystyle 5766\left(\frac{b}{\sqrt{C_{b}}}\right)^{3}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}+3584\left(\frac{b}{\sqrt{C_{b}}}\right)^{5} \displaystyle- \displaystyle 53883\left(\frac{b}{\sqrt{C_{b}}}\right)\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}+73728\left(\frac{b}{\sqrt{C_{b}}}\right) \displaystyle+ \displaystyle 29400\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}-19845\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}\Bigg]\,, (67) \displaystyle c_{4}^{\mathrm{GS}}=\frac{63C_{b}^{5/2}}{40b^{9}}\Bigg[ \displaystyle 4\left(\frac{b}{\sqrt{C_{b}}}\right)^{5}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1}-16\left(\frac{b}{\sqrt{C_{b}}}\right)^{5}+28\left(\frac{b}{\sqrt{C_{b}}}\right)^{3}\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1} \displaystyle- \displaystyle 150\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}+279\left(\frac{b}{\sqrt{C_{b}}}\right)\sqrt{\left(\frac{b}{\sqrt{C_{b}}}\right)^{2}+1} \displaystyle- \displaystyle 384\left(\frac{b}{\sqrt{C_{b}}}\right)+105\sinh^{-1}{\left(\frac{b}{\sqrt{C_{b}}}\right)}\Bigg]\,. (68) In this case, we can directly write the Daisy contribution as a polynomial without introducing a tadpole term, given by V_{\mathrm{Daisy}}^{\mathrm{GS}}(\varphi,T)=V_{\mathrm{GS},0}+\frac{1}{2}m^{2}_{\mathrm{GS}}\varphi^{2}-\frac{1}{3}K_{\mathrm{GS}}\varphi^{3}-\frac{1}{4}\lambda_{\mathrm{GS}}\varphi^{4}\,, (69) with the polynomial coefficients given by \begin{split}V_{\mathrm{GS},0}=&-\frac{C_{b}^{3/2}g^{\prime 3}T^{4}}{12\pi}\,,\quad m^{2}_{\mathrm{GS}}=-\frac{g^{\prime 3}C_{b}^{3/2}T^{2}c_{2}^{\mathrm{GS}}}{6\pi}\,,\\ K_{\mathrm{GS}}=&\frac{g^{\prime 3}T}{4\pi}\left(C_{b}^{3/2}c_{3}^{\mathrm{GS}}-1\right)\,,\quad\lambda_{\mathrm{GS}}=\frac{g^{\prime 3}C_{b}^{3/2}c_{4}^{\mathrm{GS}}}{3\pi}\,.\end{split} (70) Appendix B Non-minimal RSB While we studied in detail the minimal case with RSB, it could be the case that there are other fields that couple to the scalar field undergoing the FOPT. Here we consider the case that some dark fermions also acquire their masses thanks to the generation of the scalar vev. We include a left and a right-handed dark fermion, \nu_{D,L} and \nu_{D,R} respectively, with opposite charges under the new U(1)^{\prime} gauge symmetry. We take the charge of the scalar field to be 1, while the absolute value of the fermion fields charge is 1/2. The Lagrangian for such case is given by \begin{split}\mathcal{L}=&-\frac{1}{4}F^{\prime}_{\mu\nu}F^{\prime\mu\nu}+\left(D_{\mu}\varphi\right)^{\dagger}\left(D^{\mu}\varphi\right)+i\bar{\nu}_{D,L}\not{D}\nu_{D,L}+i\bar{\nu}_{D,R}\not{D}\nu_{D,R}\\ &-(\bar{\nu}_{D,L}y\nu_{D,R}\varphi+\mathrm{h.c.})-\frac{\lambda}{4}(\varphi^{\dagger}\varphi)^{2}\,.\end{split} (71) The RGE-flows one needs to take into account are \begin{cases}\frac{dg^{\prime}}{dt}=&\frac{1}{16\pi^{2}}\frac{2g^{\prime 3}}{3}\,,\\ \frac{d\lambda}{dt}=&\frac{1}{8\pi^{2}}\Big[10\lambda^{2}-6g^{\prime 2}\lambda+3g^{\prime 4}+2\lambda|y|^{2}-|y|^{4}\Big]\,,\\ \frac{dy}{dt}=&\frac{y}{16\pi^{2}}\left(2|y|^{2}-\frac{3}{2}g^{\prime 2}\right)\,,\end{cases} (72) where we have left the dependence of the couplings on t=\log{\mu/\mu_{0}} , with \mu_{0}=m_{Z^{\prime},0} , implicit to ease the notation. In contrast to the minimal scenario in Section 2.4 , we now need to solve these equations numerically. Moreover, the scalar anomalous dimension now also receives further contributions, for which we find \gamma=\frac{1}{16\pi^{2}}\left[-3g^{\prime 2}+|y|^{2}\right]\,. (73) Regarding the polynomial approximations for V_{\mathrm{eff}} in this case, we note that Daisy contributions are not affected by the presence of fermions, such that V_{\mathrm{Daisy}}^{\mathrm{GS}\,(\mathrm{Leg})} from Eq. ( 17 ) can still be used. Instead, for V_{\mathrm{HT}} in Eq. ( 7 ) the polynomial coefficients are given by \begin{split}&V_{0}\equiv-\frac{13\pi^{2}T^{4}}{180}\,,\quad m^{2}(T)\equiv\frac{T^{2}}{12}\left(3g^{\prime 2}+|y|^{2}\right)\,,\quad K(T)\equiv\frac{3T}{4\pi}g^{\prime 3}\,,\\ &\lambda(T)\equiv-\lambda-\frac{1}{16\pi^{2}}\left[3g^{\prime 4}\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-\frac{5}{6}\right)-|y|^{4}\left(\log{\frac{a_{f}T^{2}}{\mu^{2}}}-\frac{3}{2}\right)\right]\,.\end{split} (74) Finally, the fermion fields would also have an impact in the FOPT strength, which is in this case given by \alpha\simeq\frac{1}{\rho_{\mathrm{rad}}(T_{p})}\frac{3g_{0}^{\prime 4}-y_{0}^{4}}{128\pi^{2}}\varphi_{0}^{4}\,. (75) Appendix C Tree-level SSB We comment here on the possibility to write down the effective potential as a polynomial for the case of a scalar potential with SSB at tree-level, as is the case in the SM. The tree-level potential for a single field leading to SSB is V_{\mathrm{tree}}(\varphi)=-\frac{1}{2}m_{0}^{2}\varphi^{2}+\frac{1}{4}{\lambda}\varphi^{4}\,, (76) which has a minimum at \varphi_{0}^{2}\equiv\frac{m_{0}^{2}}{\lambda} . In this case, we cannot neglect the scalar and Goldstone contributions to the effective potential. Their field-dependent masses are respectively given by m_{\varphi}^{2}(\varphi)=\lambda\left(3\varphi^{2}-\varphi_{0}^{2}\right)\,,\quad m_{G}^{2}(\varphi)=\lambda\left(\varphi^{2}-\varphi_{0}^{2}\right)\,, (77) while the scalar thermal mass is given by \Pi_{\varphi\,(G)}(T)=\frac{T^{2}}{12}\left(3g^{\prime 2}+4\lambda\right)\,. (78) Neglecting again possible contributions from fermions, we can apply the HT expansion from Eq. ( 6 ) to find the following shape of V_{\mathrm{HT}} : \displaystyle V_{\mathrm{HT}}(\varphi,T)= \displaystyle V_{0}+\frac{1}{2}\varphi^{2}\Bigg[-m_{0}^{2}+\frac{T^{2}}{12}\left(3g^{\prime 2}+4\lambda\right)-\frac{\lambda}{4\pi^{2}}m_{0}^{2}\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-\frac{3}{2}\right)\Bigg] \displaystyle- \displaystyle\frac{T}{4\pi}g^{\prime 3}\varphi^{3}-\frac{T}{12\pi}\lambda^{3/2}\left[\left(3\varphi^{2}-\varphi_{0}^{2}\right)^{3/2}+\left(\varphi^{2}-\varphi_{0}^{2}\right)^{3/2}\right] \displaystyle+ \displaystyle\frac{1}{4}\varphi^{4}\Bigg[\lambda+\frac{1}{16\pi^{2}}\left[3g^{\prime 4}\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-\frac{5}{6}\right)+10\lambda^{2}\left(\log{\frac{a_{b}T^{2}}{\mu^{2}}}-\frac{3}{2}\right)\right]\Bigg]\,. (79) It is obvious here that the HT expansion does not automatically render the potential as a polynomial because of the structure of the scalar and Goldstone masses. We note two possibilities here: • Hierarchical spectrum: If there is a hierarchy between the gauge boson mass and the scalar masses, such that g^{\prime 2}\gg 2\lambda , then the scalar contributions can be neglected altogether. This case then reduces to our discussion in the main text on RSB where, by construction, one finds \lambda\sim g^{\prime 4}\ll g^{\prime 2} for perturbative couplings. In this case however this would only allow to study a particular region of parameter space. • Polynomial decomposition: One could go beyond the HT expansion and use the same approach we introduced for Daisy resummation by projecting the non-polynomial terms into a basis of orthogonal polynomials. On top of this, one should additionally consider Daisy resummation in order to study the tunneling process, which in this case explicitly reads as \begin{split}V_{\mathrm{Daisy}}(\varphi,T)=&-\frac{T}{12\pi}\Bigg[\left(g^{\prime 2}\varphi^{2}+\frac{g^{\prime 2}}{3}T^{2}\right)^{3/2}-g^{\prime 3}\varphi^{3}\\ &+\left(3\lambda\varphi^{2}-\lambda\varphi_{0}^{2}+\frac{3g^{\prime 2}+4\lambda}{12}T^{2}\right)^{3/2}-\lambda^{3/2}\left(3\varphi^{2}-\varphi_{0}^{2}\right)^{3/2}\\ &+\left(\lambda\varphi^{2}-\lambda\varphi_{0}^{2}+\frac{3g^{\prime 2}+4\lambda}{12}T^{2}\right)^{3/2}-\lambda^{3/2}\left(\varphi^{2}-\varphi_{0}^{2}\right)^{3/2}\Bigg]\,.\end{split} (80) We consider that performing the polynomial decomposition in this case would need to introduce different scales b (see the discussion in Subsection 2.3 ) for each term, considerably degrading the approximation. More importantly, in this case the potential barrier does not necessarily appear at small field values \varphi\ll T , such that the HT approximation is not as justified as in the classically scale-invariant scenario we studied in the main text. For these reasons, we consider that scenarios with SSB at tree-level cannot be consistently studied as a polynomial potential with our current approximations, for which we can use the results of Ref. [ 59 ] to find S_{3} reliably.